- 08 Apr, 2016 7 commits
-
-
Jiri Slaby authored
The write handler allocates skbs and queues them into data->readq. Read side should read them, if there is any. If there is none, skbs should be dropped by hdev->flush. But this happens only if the device is HCI_UP, i.e. hdev->power_on work was triggered already. When it was not, skbs stay allocated in the queue when /dev/vhci is closed. So purge the queue in ->release. Program to reproduce: #include <err.h> #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/uio.h> int main() { char buf[] = { 0xff, 0 }; struct iovec iov = { .iov_base = buf, .iov_len = sizeof(buf), }; int fd; while (1) { fd = open("/dev/vhci", O_RDWR); if (fd < 0) err(1, "open"); usleep(50); if (writev(fd, &iov, 1) < 0) err(1, "writev"); usleep(50); close(fd); } return 0; } Result: kmemleak: 4609 new suspected memory leaks unreferenced object 0xffff88059f4d5440 (size 232): comm "vhci", pid 1084, jiffies 4294912542 (age 37569.296s) hex dump (first 32 bytes): 20 f0 23 87 05 88 ff ff 20 f0 23 87 05 88 ff ff .#..... .#..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: ... [<ffffffff81ece010>] __alloc_skb+0x0/0x5a0 [<ffffffffa021886c>] vhci_create_device+0x5c/0x580 [hci_vhci] [<ffffffffa0219436>] vhci_write+0x306/0x4c8 [hci_vhci] Fixes: 23424c0d (Bluetooth: Add support creating virtual AMP controllers) Signed-off-by:Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable 3.13+ <stable@vger.kernel.org>
-
Jiri Slaby authored
Both vhci_get_user and vhci_release race with open_timeout work. They both contain cancel_delayed_work_sync, but do not test whether the work actually created hdev or not. Since the work can be in progress and _sync will wait for finishing it, we can have data->hdev allocated when cancel_delayed_work_sync returns. But the call sites do 'if (data->hdev)' *before* cancel_delayed_work_sync. As a result: * vhci_get_user allocates a second hdev and puts it into data->hdev. The former is leaked. * vhci_release does not release data->hdev properly as it thinks there is none. Fix both cases by moving the actual test *after* the call to cancel_delayed_work_sync. This can be hit by this program: #include <err.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <time.h> #include <unistd.h> #include <sys/stat.h> #include <sys/types.h> int main(int argc, char **argv) { int fd; srand(time(NULL)); while (1) { const int delta = (rand() % 200 - 100) * 100; fd = open("/dev/vhci", O_RDWR); if (fd < 0) err(1, "open"); usleep(1000000 + delta); close(fd); } return 0; } And the result is: BUG: KASAN: use-after-free in skb_queue_tail+0x13e/0x150 at addr ffff88006b0c1228 Read of size 8 by task kworker/u13:1/32068 ============================================================================= BUG kmalloc-192 (Tainted: G E ): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in vhci_open+0x50/0x330 [hci_vhci] age=260 cpu=3 pid=32040 ... kmem_cache_alloc_trace+0x150/0x190 vhci_open+0x50/0x330 [hci_vhci] misc_open+0x35b/0x4e0 chrdev_open+0x23b/0x510 ... INFO: Freed in vhci_release+0xa4/0xd0 [hci_vhci] age=9 cpu=2 pid=32040 ... __slab_free+0x204/0x310 vhci_release+0xa4/0xd0 [hci_vhci] ... INFO: Slab 0xffffea0001ac3000 objects=16 used=13 fp=0xffff88006b0c1e00 flags=0x5fffff80004080 INFO: Object 0xffff88006b0c1200 @offset=4608 fp=0xffff88006b0c0600 Bytes b4 ffff88006b0c11f0: 09 df 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff88006b0c1200: 00 06 0c 6b 00 88 ff ff 00 00 00 00 00 00 00 00 ...k............ Object ffff88006b0c1210: 10 12 0c 6b 00 88 ff ff 10 12 0c 6b 00 88 ff ff ...k.......k.... Object ffff88006b0c1220: c0 46 c2 6b 00 88 ff ff c0 46 c2 6b 00 88 ff ff .F.k.....F.k.... Object ffff88006b0c1230: 01 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 ................ Object ffff88006b0c1240: 40 12 0c 6b 00 88 ff ff 40 12 0c 6b 00 88 ff ff @..k....@..k.... Object ffff88006b0c1250: 50 0d 6e a0 ff ff ff ff 00 02 00 00 00 00 ad de P.n............. Object ffff88006b0c1260: 00 00 00 00 00 00 00 00 ab 62 02 00 01 00 00 00 .........b...... Object ffff88006b0c1270: 90 b9 19 81 ff ff ff ff 38 12 0c 6b 00 88 ff ff ........8..k.... Object ffff88006b0c1280: 03 00 20 00 ff ff ff ff ff ff ff ff 00 00 00 00 .. ............. Object ffff88006b0c1290: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Object ffff88006b0c12a0: 00 00 00 00 00 00 00 00 00 80 cd 3d 00 88 ff ff ...........=.... Object ffff88006b0c12b0: 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 . .............. Redzone ffff88006b0c12c0: bb bb bb bb bb bb bb bb ........ Padding ffff88006b0c13f8: 00 00 00 00 00 00 00 00 ........ CPU: 3 PID: 32068 Comm: kworker/u13:1 Tainted: G B E 4.4.6-0-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 Workqueue: hci0 hci_cmd_work [bluetooth] 00000000ffffffff ffffffff81926cfa ffff88006be37c68 ffff88006bc27180 ffff88006b0c1200 ffff88006b0c1234 ffffffff81577993 ffffffff82489320 ffff88006bc24240 0000000000000046 ffff88006a100000 000000026e51eb80 Call Trace: ... [<ffffffff81ec8ebe>] ? skb_queue_tail+0x13e/0x150 [<ffffffffa06e027c>] ? vhci_send_frame+0xac/0x100 [hci_vhci] [<ffffffffa0c61268>] ? hci_send_frame+0x188/0x320 [bluetooth] [<ffffffffa0c61515>] ? hci_cmd_work+0x115/0x310 [bluetooth] [<ffffffff811a1375>] ? process_one_work+0x815/0x1340 [<ffffffff811a1f85>] ? worker_thread+0xe5/0x11f0 [<ffffffff811a1ea0>] ? process_one_work+0x1340/0x1340 [<ffffffff811b3c68>] ? kthread+0x1c8/0x230 ... Memory state around the buggy address: ffff88006b0c1100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88006b0c1180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88006b0c1200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88006b0c1280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88006b0c1300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 23424c0d (Bluetooth: Add support creating virtual AMP controllers) Signed-off-by: -
Patrik Flykt authored
Update the security level check to allow setting BT_SECURITY_FIPS for an L2CAP socket. Signed-off-by:
Patrik Flykt <patrik.flykt@linux.intel.com> Signed-off-by:
-
Loic Poulain authored
HCI_UART_PROTO_SET flag is set before hci_uart_set_proto call. If we receive data from tty layer during this procedure, proto pointer may not be assigned yet, leading to null pointer dereference in rx method hci_uart_tty_receive. This patch fixes this issue by introducing HCI_UART_PROTO_READY flag in order to avoid any proto operation before proto opening and assignment. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Loic Poulain authored
This ID is used at least by Asus T100-CHI. Signed-off-by:
-
Johan Hedberg authored
In case of buggy controllers send advertising packet types that we don't know of we should simply ignore them instead of trying to react to them in some (potentially wrong) way. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Johan Hedberg authored
If we're dealing with a single-mode controller or BR/EDR is disable for a dual-mode one, the NO_BREDR flag needs to be unconditionally present in the advertising data. This patch moves it out from behind an extra condition to be always set in the create_instance_adv_data() function if BR/EDR is disabled. Signed-off-by:
-
- 04 Apr, 2016 17 commits
-
-
Simon Horman authored
Remove the sh-irda driver as it appears to be unused since c0bb9b30 ("ARCH: ARM: shmobile: Remove ag5evm board support"). Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Moritz Fischer says: ==================== macb: Codingstyle cleanups resending almost unchanged v2 here: Changes from v2: * Rebased onto net-next * Changed 5th patches commit message * Added Nicholas' and Michal's Acked-Bys Changes from v1: * Backed out variable scope changes * Separated out ether_addr_copy into it's own commit * Fixed typo in comments as suggested by Joe ==================== Signed-off-by: -
Moritz Fischer authored
Acked-by:
Michal Simek <michal.simek@xilinx.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by:
-
Moritz Fischer authored
Checkpatch suggests using ether_addr_copy over memcpy to copy the mac address. Acked-by:
-
Moritz Fischer authored
This commit deals with a bunch of checkpatch suggestions that without changing behavior make checkpatch happier. Acked-by:
-
Moritz Fischer authored
This commit takes care of the coding style warnings that are mostly due to a different comment style and lines over 80 chars, as well as a dangling else. Acked-by:
-
Moritz Fischer authored
checkpatch.pl gave the following error: ERROR: space required before the open parenthesis '(' + for(; p < end; p++, offset += 4) Acked-by: -
Kazuya Mizuguchi authored
This patch supports the following interrupts. - One interrupt for multiple (timestamp, error, gPTP) - One interrupt for emac - Four interrupts for dma queue (best effort rx/tx, network control rx/tx) This patch improve efficiency of the interrupt handler by adding the interrupt handler corresponding to each interrupt source described above. Additionally, it reduces the number of times of the access to EthernetAVB IF. Also this patch prevent this driver depends on the whim of a boot loader. [ykaneko0929@gmail.com: define bit names of registers] [ykaneko0929@gmail.com: add comment for gen3 only registers] [ykaneko0929@gmail.com: fix coding style] [ykaneko0929@gmail.com: update changelog] [ykaneko0929@gmail.com: gen3: fix initialization of interrupts] [ykaneko0929@gmail.com: gen3: fix clearing interrupts] [ykaneko0929@gmail.com: gen3: add helper function for request_irq()] [ykaneko0929@gmail.com: gen3: remove IRQF_SHARED flag for request_irq()] [ykaneko0929@gmail.com: revert ravb_close() and ravb_ptp_stop()] [ykaneko0929@gmail.com: avoid calling free_irq() to non-hooked interrupts] [ykaneko0929@gmail.com: make NC/BE interrupt handler a function] [ykaneko0929@gmail.com: make timestamp interrupt handler a function] [ykaneko0929@gmail.com: timestamp interrupt is handled in multiple interrupt handler instead of dma queue interrupt handler] Signed-off-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Soheil Hassas Yeganeh says: ==================== add TX timestamping via cmsg This patch series aim at enabling TX timestamping via cmsg. Currently, to occasionally sample TX timestamping on a socket, applications need to call setsockopt twice: first for enabling timestamps and then for disabling them. This is an unnecessary overhead. With cmsg, in contrast, applications can sample TX timestamps per sendmsg(). This patch series adds the code for processing SO_TIMESTAMPING for cmsg's of the SOL_SOCKET level, and adds the glue code for TCP, UDP, and RAW for both IPv4 and IPv6. This implementation supports overriding timestamp generation flags (i.e., SOF_TIMESTAMPING_TX_*) but not timestamp reporting flags. Applications must still enable timestamp reporting via setsockopt to receive timestamps. This series does not change existing timestamping behavior for applications that are using socket options. I will follow up with another patch to enable timestamping for active TFO (client-side TCP Fast Open) and also setting packet mark via cmsgs. Thanks! Changes in v2: - Replace u32 with __u32 in the documentation. Changes in v3: - Fix the broken build for L2TP (due to changes in IPv6). ==================== Signed-off-by: -
Soheil Hassas Yeganeh authored
Update docs and add code snippet for using cmsg for timestamping. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
Currently, SOL_TIMESTAMPING can only be enabled using setsockopt. This is very costly when users want to sample writes to gather tx timestamps. Add support for enabling SO_TIMESTAMPING via control messages by using tsflags added in `struct sockcm_cookie` (added in the previous patches in this series) to set the tx_flags of the last skb created in a sendmsg. With this patch, the timestamp recording bits in tx_flags of the skbuff is overridden if SO_TIMESTAMPING is passed in a cmsg. Please note that this is only effective for overriding the recording timestamps flags. Users should enable timestamp reporting (e.g., SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_OPT_ID) using socket options and then should ask for SOF_TIMESTAMPING_TX_* using control messages per sendmsg to sample timestamps for each write. Signed-off-by:
-
Soheil Hassas Yeganeh authored
Process socket-level control messages by invoking __sock_cmsg_send in ip6_datagram_send_ctl for control messages on the SOL_SOCKET layer. This makes sure whenever ip6_datagram_send_ctl is called for udp and raw, we also process socket-level control messages. This is a bit uglier than IPv4, since IPv6 does not have something like ipcm_cookie. Perhaps we can later create a control message cookie for IPv6? Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv6 control messages. Signed-off-by:
-
Soheil Hassas Yeganeh authored
Process socket-level control messages by invoking __sock_cmsg_send in ip_cmsg_send for control messages on the SOL_SOCKET layer. This makes sure whenever ip_cmsg_send is called in udp, icmp, and raw, we also process socket-level control messages. Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv4 control messages. Signed-off-by:
-
Soheil Hassas Yeganeh authored
Accept SO_TIMESTAMPING in control messages of the SOL_SOCKET level as a basis to accept timestamping requests per write. This implementation only accepts TX recording flags (i.e., SOF_TIMESTAMPING_TX_HARDWARE, SOF_TIMESTAMPING_TX_SOFTWARE, SOF_TIMESTAMPING_TX_SCHED, and SOF_TIMESTAMPING_TX_ACK) in control messages. Users need to set reporting flags (e.g., SOF_TIMESTAMPING_OPT_ID) per socket via socket options. This commit adds a tsflags field in sockcm_cookie which is set in __sock_cmsg_send. It only override the SOF_TIMESTAMPING_TX_* bits in sockcm_cookie.tsflags allowing the control message to override the recording behavior per write, yet maintaining the value of other flags. This patch implements validating the control message and setting tsflags in struct sockcm_cookie. Next commits in this series will actually implement timestamping per write for different protocols. Signed-off-by:
-
Soheil Hassas Yeganeh authored
Currently, to avoid a cache line miss for accessing skb_shinfo, tcp_ack_tstamp skips socket that do not have SOF_TIMESTAMPING_TX_ACK bit set in sk_tsflags. This is implemented based on an implicit assumption that the SOF_TIMESTAMPING_TX_ACK is set via socket options for the duration that ACK timestamps are needed. To implement per-write timestamps, this check should be removed and replaced with a per-packet alternative that quickly skips packets missing ACK timestamps marks without a cache-line miss. To enable per-packet marking without a cache line miss, use one bit in TCP_SKB_CB to mark a whether a SKB might need a ack tx timestamp or not. Further checks in tcp_ack_tstamp are not modified and work as before. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
SOF_TIMESTAMPING_OPT_ID is set to get data-independent IDs to associate timestamps with send calls. For TCP connections, tp->snd_una is used as the starting point to calculate relative IDs. This socket option will fail if set before the handshake on a passive TCP fast open connection with data in SYN or SYN/ACK, since setsockopt requires the connection to be in the ESTABLISHED state. To address these, instead of limiting the option to the ESTABLISHED state, accept the SOF_TIMESTAMPING_OPT_ID option as long as the connection is not in LISTEN or CLOSE states. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
-
Willem de Bruijn authored
To process cmsg's of the SOL_SOCKET level in addition to cmsgs of another level, protocols can call sock_cmsg_send(). This causes a double walk on the cmsghdr list, one for SOL_SOCKET and one for the other level. Extract the inner demultiplex logic from the loop that walks the list, to allow having this called directly from a walker in the protocol specific code. Signed-off-by:
-
- 03 Apr, 2016 16 commits
-
-
David S. Miller authored
Alexandre TORGUE says: ==================== Enhance stmmac driver to support GMAC4.x IP This is a subset of patch to enhance current stmmac driver to support new GMAC4.x chips. New set of callbacks is defined to support this new family: descriptors, dma, core. One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers (not yet implemented) Below some throughput figures obtained on some boxes: iperf (mbps) -------------------------------------- tcp udp tx rx tx rx ----------------- GMAC4.x 935 930 750 800 Note: There is a change in 4.10a databook on bitfield mapping of DMA_CHANx_INTR_ENA register. This requires to have é diffrent set of callbacks between IP 4.00a and 4.10a. ==================== Signed-off-by: -
Alexandre TORGUE authored
Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Alexandre TORGUE authored
This patch just updates the driver to the version fully tested on STi platforms. This version is Jan_2016. Signed-off-by:
-
Alexandre TORGUE authored
Update stmmac driver documentation according to new GMAC 4.x family. Signed-off-by:
-
Alexandre TORGUE authored
This patch adds the whole GMAC4 support inside the stmmac d.d. now able to use the new HW and some new features i.e.: TSO. It is missing the multi-queue and split Header support at this stage. This patch also updates the driver version and the stmmac.txt. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Alexandre TORGUE authored
This is to support the snps,dwmac-4.00 and snps,dwmac-4.10a and related features on the platform driver. See binding doc for further details. Signed-off-by:
-
Alexandre TORGUE authored
For gmac3, the MMC addr map is: 0x100 - 0x2fc For gmac4, the MMC addr map is: 0x700 - 0x8fc So instead of adding 0x600 to the IO address when setup the mmc, the RMON base address is saved inside the private structure and then used to manage the counters. Signed-off-by:
-
Alexandre TORGUE authored
This is the initial support for GMAC4 that includes the main callbacks to setup the core module: including Csum, basic filtering, mac address and interrupt (MMC, MTL, PMT) No LPI added. Signed-off-by:
-
Alexandre TORGUE authored
DMA behavior is linked to descriptor management: -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. Up to 8 DMA could be use but currently we only use one (channel0) Signed-off-by:
-
Alexandre TORGUE authored
This is the main header file to define all the macro used for GMAC4 DMA and CORE parts. Signed-off-by:
-
Alexandre TORGUE authored
One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: -
Alexandre TORGUE authored
synopsys_uid is only used once after setup, to get synopsys_id by using shitf/mask operation. It's no longer used then. So, remove this temporary variable and directly compute synopsys_id from setup routine. Acked-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Alexandre TORGUE authored
To avoid lot of check in stmmac_main for display ring management and support the GMAC4 chip, the display_ring function is moved into dedicated descriptor file. Signed-off-by:
-
Alexandre TORGUE authored
On next GMAC IP generation (4.xx), the way to get hw feature is not the same than on previous 3.xx. As it is hardware dependent, the way to get hw capabilities should be defined in dma ops of each MAC IP. It will avoid also a huge computation of hw capabilities in stmmac_main. Signed-off-by:
-
Lisheng authored
The patch adds support of pause ctrl for HNS V2, and this feature is lost by HNS V1: 1) service ports can disable rx pause frame, 2) debug ports can open tx/rx pause frame. And this patch updates the REGs about the pause ctrl when updated status function called by upper layer routine. Signed-off-by:Lisheng <lisheng011@huawei.com> Signed-off-by:
Yisen Zhuang <Yisen.Zhuang@huawei.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Haishuang Yan authored
Since nla_get_in_addr and nla_put_in_addr were implemented, so use them appropriately. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
