- 25 Dec, 2008 40 commits
-
-
Martin Schwidefsky authored
Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Hongjie Yang authored
Signed-off-by:
Hongjie Yang <hongjie@us.ibm.com> Signed-off-by:
-
Melissa Howland authored
Signed-off-by:
Melissa Howland <melissah@us.ibm.com> Signed-off-by:
-
Michael Holzheu authored
Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
Signed-off-by:
-
Martin Schwidefsky authored
Signed-off-by: -
Michael Holzheu authored
Signed-off-by:
-
Martin Schwidefsky authored
Signed-off-by: -
Jan Glauber authored
Signed-off-by:
Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ernst authored
Signed-off-by:
Michael Ernst <mernst@de.ibm.com> Signed-off-by:
-
Frank Munzert authored
Signed-off-by:
Frank Munzert <munzert@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Klaus-D. Wacker authored
Signed-off-by:
Klaus-D. Wacker <kdwacker@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
Signed-off-by:
-
Martin Schwidefsky authored
Signed-off-by: -
Julia Lawall authored
The loop above the modified code only terminates when rc is a valid pointer. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Hendrik Brueckner authored
This patch sets the default console device for s390. The console= kernel parameter can be still used to switch the preferred console to some other device. In that case, console messages are also printed on the default console device (ttyS0). Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
-
Julia Lawall authored
If reply is ERR_PTR(...), then it should not be dereferenced, so I have moved the dereference from the declaration to after the IS_ERR test. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; identifier fld; position p1,p2; @@ ( x = E; | x = E | x@p1->fld ... when != x = E IS_ERR(x@p2) ... when any ) @other_match exists@ expression match.x, E1, E2; position match.p1,match.p2; @@ x = E1 ... when != x = E2 when != x@p1 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "* file %s dereference %s test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
-
Martin Schwidefsky authored
Fix freeing of the panic_stack if the allocation of async_stack failed. Signed-off-by: -
Martin Schwidefsky authored
Tell the compile that the clear_table inline assembly writes to the memory referenced by *s. Signed-off-by: -
Martin Schwidefsky authored
On s390 we always want to run with precise cputime accounting. Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING. Signed-off-by: -
Heiko Carstens authored
Interrupts haven't been implemented. So remove the dead code. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Introduce a topology=[on|off] kernel parameter which allows to switch cpu topology on/off. Default will be off, since it looks like that for some workloards this doesn't behave very well (on s390). Signed-off-by:
-
Martin Schwidefsky authored
Add the machine types for z9-bc, z10-ec and z10-bc to the elf_platform detection in setup_hwcaps. Signed-off-by: -
Heiko Carstens authored
Early init code clears the backchain of the initial kernel stack frame. This is not necessary since it is pre initialized with zeros. Plus it was broken on 64 bit since it cleared only four of eight bytes. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Martin Schwidefsky authored
This patch adds the code generation option for IBM System z10 and adds a check in head[31,64].S to prevents the execution of a kernel compiled for a new processor type on an old machine. Signed-off-by: -
Heiko Carstens authored
get rid of this one: CC drivers/s390/char/sclp_vt220.o drivers/s390/char/sclp_vt220.c:588: warning: '__sclp_vt220_flush_buffer' defined but not used Signed-off-by:
-
Martin Schwidefsky authored
Functions which end in a BUG() statement and skip the return statement cause compile warnings on s390, e.g.: mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:321: warning: control reaches end of non-void function To avoid the warning add an endless loop to the BUG() macro. Signed-off-by:
-
Heiko Carstens authored
disabled_wait() won't return, so add an __attribute__((noreturn)). This will remove a false positive finding which our internal code checker reports. Signed-off-by:
-
Sebastian Ott authored
To check if multipath is available we count the bits set in lpm, which could change over time (via configure [on|off] of a path). The following patch uses the pim (which is persistent) for this decision. Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Sometimes we change the pmcw configuration but don't call msch to transmit these changes to the channel subsystem. The patch fixes this by calling cio_commit_config in such cases. Signed-off-by:
-
Sebastian Ott authored
To change the configuration of a subchannel we alter the modifiable bits of the subchannel's schib field and issue a modify subchannel. There can be the case that not all changes were applied -or worse- quietly overwritten by the hardware. With the next store subchannel we obtain the current state of the hardware but lose our target configuration. With this patch we introduce a subchannel_config structure which contains the target subchannel configuration. Additionally the msch wrapper cio_modify is replaced with cio_commit_config which copies the desired changes to a temporary schib. msch is then called with the temporary schib. This schib is only written back to the subchannel if all changes were applied. Signed-off-by:
-
Sebastian Ott authored
There is the chance that we get condition code 0 for a stsch but the resulting schib is not vaild. In the current code there are 2 cases: * we do a check for validity of the schib after stsch, but at this time we have already stored the invaild schib in the subchannel structure. This may lead to problems. * we don't do a check for validity, which is not that good either. The patch addresses both issues by introducing the stsch wrapper cio_update_schib which performs stsch on a local schib. This schib is only written back to the subchannel if it's valid. side note: For some functions (chp_events) the return codes are different now (-ENXIO vs -ENODEV) but this shouldn't do harm since the caller doesn't check for _specific_ errors. Signed-off-by:
-
Cornelia Huck authored
Check if a ccw device is registered via device_is_registered() and not via the old kludge of checking the membership in driver core internal klists. Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Cornelia Huck authored
Just put the cdev's reference count to give up our reference. Signed-off-by:
-
Cornelia Huck authored
If we fail the probe for an I/O subchannel, we won't be able to unregister it again since there are no sch_event() callbacks for unbound subchannels. Just succeed the probe in any case and schedule unregistering the subchannel. Signed-off-by:
-
Cornelia Huck authored
There is a race between io_subchannel_register() and io_subchannel_sch_event() which may cause a subchannel to be unregistered because it is no longer operational before io_subchannel_register() had run. We need to check whether the subchannel is still registered before the ccw device can be registered and just bail out if it is not. Signed-off-by:
-
Cornelia Huck authored
Subchannel refcounting was incorrect in some places, especially a refcount was missing when ccw_device_call_sch_unregister() was called and the refcount was not correctly switched after moving devices. Fix this by establishing the following rules: - The ccw_device obtains a reference on its parent subchannel when dev.parent is set and gives it up in its release function. This is needed because we need a parent reference for correct refcounting even before the ccw device is (if at all) registered. - When calling device_move(), obtain a reference on the new subchannel before moving the ccw device and give up the reference on the old parent after moving. This brings the refcount in line with the first rule. Signed-off-by:
-
