- 05 Aug, 2020 17 commits
-
-
Sai Prakash Ranjan authored
Convert QCOM watchdog timer bindings to DT schema format using json-schema. Signed-off-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/77b47aad9d17cb4ec8359bdbbb30c33d818117e6.1593112534.git.saiprakash.ranjan@codeaurora.orgSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org>
-
Serge Semin authored
For the sake of the easier device-driver debug procedure, we added a DebugFS file with the controller registers state. It's available only if kernel is configured with DebugFS support. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by:
-
Serge Semin authored
DW Watchdog can rise an interrupt in case if IRQ request mode is enabled and timer reaches the zero value. In this case the IRQ lane is left pending until either the next watchdog kick event (watchdog restart) or until the WDT_EOI register is read or the device/system reset. This interface can be used to implement the pre-timeout functionality optionally provided by the Linux kernel watchdog devices. IRQ mode provides a two stages timeout interface. It means the IRQ is raised when the counter reaches zero, while the system reset occurs only after subsequent timeout if the timer restart is not performed. Due to this peculiarity the pre-timeout value is actually set to the achieved hardware timeout, while the real watchdog timeout is considered to be twice as much of it. This applies a significant limitation on the pre-timeout values, so current implementation supports either zero value, which disables the pre-timeout events, or non-zero values, which imply the pre-timeout to be at least half of the current watchdog timeout. Note that we ask the interrupt controller to detect the rising-edge pre-timeout interrupts to prevent the high-level-IRQs flood, since if the pre-timeout happens, the IRQ lane will be left pending until it's cleared by the timer restart. Signed-off-by:
-
Serge Semin authored
DW Watchdog IP core can be synthesised with asynchronous timer/APB clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case separate clock signals are supposed to be used to feed watchdog timer and APB interface of the device. Currently the driver supports the synchronous mode only. Since there is no way to determine which mode was actually activated for device from its registers, we have to rely on the platform device configuration data. If optional "pclk" clock source is supplied, we consider the device working in asynchronous mode, otherwise the driver falls back to the synchronous configuration. Signed-off-by:
-
Serge Semin authored
In case if the DW Watchdog IP core is synthesised with WDT_USE_FIX_TOP == false, the TOP interval indexes make the device to load a custom periods to the counter. These periods are hardwired at the IP synthesis stage and can be within [2^8, 2^(WDT_CNT_WIDTH - 1)]. Alas their values can't be detected at runtime and must be somehow supplied to the driver so one could properly determine the watchdog timeout intervals. For this purpose we suggest to have a vendor- specific dts property "snps,watchdog-tops" utilized, which would provide an array of sixteen counter values. At device probe stage they will be used to initialize the watchdog device timeouts determined from the array values and current clocks source rate. In order to have custom TOP values supported the driver must be altered in the following way. First of all the fixed-top values ready-to-use array must be determined for compatibility with currently supported devices, which were synthesised with WDT_USE_FIX_TOP == true. It will be used if either fixed TOP feature is detected being enabled or no custom TOPs are fetched from the device dt node. Secondly at the probe stage we must initialize an array of the watchdog timeouts corresponding to the detected TOPs list and the reference clock rate. For generality the procedure of initialization is designed in a way to support the TOPs array with no limitations on the items order or value. Finally the watchdog period search methods should be altered to support the new timeouts data structure. Signed-off-by:
-
Serge Semin authored
In case if DW Watchdog IP core is built with WDT_USE_FIX_TOP == false, a custom timeout periods are used to preset the timer counter. In this case that periods should be specified in a new "snps,watchdog-tops" property of the DW watchdog dts node. Signed-off-by:
-
Serge Semin authored
DW Watchdog IP core can be synthesised with asynchronous timer/APB clocks support (WDT_ASYNC_CLK_MODE_ENABLE == 1). In this case separate clock signals are supposed to be used to feed watchdog timer and APB interface of the device. Let's update the DW Watchdog DT node schema so it would support the optional APB3 bus clock specified along with the mandatory watchdog timer reference clock. Signed-off-by:
-
Serge Semin authored
Modern device tree bindings are supposed to be created as YAML-files in accordance with dt-schema. This commit replaces the DW Watchdog legacy bare text bindings with YAML file. As before the binding states that the corresponding dts node is supposed to have a registers range, a watchdog timer references clock source, optional reset line and pre-timeout interrupt. Signed-off-by:
-
Lukas Bulwahn authored
Commit 5c24a28b ("dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog") added the new ARM SMC WATCHDOG DRIVER entry in MAINTAINERS, but slipped in a minor mistake. Luckily, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: devicetree/bindings/watchdog/arm-smc-wdt.yaml Update file entry to intended file location. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Julius Werner <jwerner@chromium.org> Reviewed-by:
Evan Benn <evanbenn@chromium.org> Link: https://lore.kernel.org/r/20200602052104.7795-1-lukas.bulwahn@gmail.comSigned-off-by:
-
Wang Qing authored
Use kobj_to_dev() API instead of container_of(). Signed-off-by:
Wang Qing <wangqing@vivo.com> Reviewed-by:
-
Tiezhu Yang authored
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by:
-
Martin Wu authored
sunxi_wdt_probe() should return -ENOMEM when devm_kzalloc() fails. Signed-off-by:
Martin Wu <wuyan@allwinnertech.com> Signed-off-by:
Frank Lee <frank@allwinnertech.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
-
Bumsik Kim authored
Use the dedicated function watchdog_active() instead of the generic test_bit() function. It is done using the following Coccinelle script: @@ identifier wdd; @@ - test_bit(WDOG_ACTIVE, &wdd->status) + watchdog_active(wdd) Signed-off-by:
Bumsik Kim <k.bumsik@gmail.com> Reviewed-by:
-
Michael Shych authored
Add documentation with details of new type of Mellanox watchdog driver. Signed-off-by:
Michael Shych <michaelsh@mellanox.com> Reviewed-by:
Vadim Pasternak <vadimp@mellanox.com> Acked-by:
-
Michael Shych authored
New programmable logic device can have watchdog type 3 implementation. It's same as Type 2 with extended maximum timeout period. Maximum timeout is up-to 65535 sec. Type 3 HW watchdog implementation can exist on all Mellanox systems. It is differentiated by WD capability bit. Signed-off-by:
-
Michael Shych authored
Add verification of WD capability in order to distinguish between the existing WD types and new type, implemented in CPLD. Add configuration for a new WD type. Change access mode for watchdog registers. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200504141427.17685-3-michaelsh@mellanox.comSigned-off-by:
-
Michael Shych authored
Add new watchdog type 3 with longer timeout period. Extend size of health_cntr field that that can be used to init watchdog timeout period. Signed-off-by:
-
- 26 Jul, 2020 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master Pull Kbuild fixes from Masahiro Yamada: - do not use non-portable strsep() in a host program - fix single target builds for external modules - change Clang's --prefix option to make it work for the latest Clang * tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation kbuild: fix single target builds for external modules modpost: remove use of non-standard strsep() in HOSTCC code
-
Linus Torvalds authored
Merge branch 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into master Pull parisc fixes from Helge Deller: "Two fixes: - Add the cmpxchg() function for pointers to u8 values. This fixes a kernel linking error when building the tusb1210 driver (from Liam Beguin). - Add a define for atomic64_set_release() to fix CPU soft lockups which happen because of missing unlocks while processing bit operations (from John David Anglin)" * 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add atomic64_set_release() define to avoid CPU soft lockups parisc: add support for cmpxchg on u8 pointers
-
Linus Torvalds authored
Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master Pull char/misc driver fixes from Greg KH: "Here are a few small driver fixes for 5.8-rc7 They include: - habanalabs fixes - tiny fpga driver fixes - /dev/mem fixup from previous changes - interconnect driver fixes - binder fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: msm8916: Fix buswidth of pcnoc_s nodes interconnect: Do not skip aggregation for disabled paths /dev/mem: Add missing memory barriers for devmem_inode binder: Don't use mmput() from shrinker function. habanalabs: prevent possible out-of-bounds array access fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret' habanalabs: set 4s timeout for message to device CPU habanalabs: set clock gating per engine habanalabs: block WREG_BULK packet on PDMA
-
Linus Torvalds authored
Merge tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master Pull driver core fix from Greg KH: "A single driver core fix for 5.8-rc7. It resolves a problem found in the previous fix for this code made in 5.8-rc6. Hopefully this is all now cleared up, as this seems to be the last of the reported issues in this area, and was tested on the problem hardware. This patch has been in linux-next with no reported problems" * tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: device property: Avoid NULL pointer dereference in device_get_next_child_node()
-
Linus Torvalds authored
Merge tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master Pull staging driver fixes from Greg KH: "Five small staging driver fixes for 5.8-rc7 to resolve some reported problems: - four comedi driver fixes for problems found with them - a syzbot-found fix for the wlang-ng driver that resolves a much reported problem. All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wlan-ng: properly check endpoint types staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty and serial and fbcon fixes for 5.8-rc7 to resolve some reported issues. The fbcon fix is in here as it was simpler to take it this way (and it was acked by the maintainer) as it was related to the vt console fix as well, both of which resolve syzbot-found issues in the console handling code. The other serial driver fixes are for small issues reported in the -rc releases. All of these have been in linux-next with no reported issues" * tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins. serial: 8250_mtk: Fix high-speed baud rates clamping serial: 8250: fix null-ptr-deref in serial8250_start_tx() serial: tegra: drop bogus NULL tty-port checks serial: tegra: fix CREAD handling for PIO tty: xilinx_uartps: Really fix id assignment vt: Reject zero-sized screen buffer size.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Three small USB XHCI driver fixes for 5.8-rc7. They all resolve some minor issues that have been reported on some different platforms. All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: tegra: Fix allocation for the FPCI context usb: xhci: Fix ASM2142/ASM3142 DMA addressing usb: xhci-mtk: fix the failure of bandwidth allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fix from James Bottomley: "Small core patch to fix a corner case bug: we forgot to run the queues to handle starvation in the error exit from the scsi_queue_rq routine, which can lead to hangs on error conditions" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Run queue in case of I/O resource contention failure
-
- 25 Jul, 2020 14 commits
-
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master Pull RISC-V fixes from Palmer Dabbelt: "A few more fixes this week: - A fix to avoid using SBI calls during kasan initialization, as the SBI calls themselves have not been probed yet. - Three fixes related to systems with multiple memory regions" * tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Parse all memory blocks to remove unusable memory RISC-V: Do not rely on initrd_start/end computed during early dt parsing RISC-V: Set maximum number of mapped pages correctly riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
-
Linus Torvalds authored
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix a section end page alignment assumption that was causing crashes - Fix ORC unwinding on freshly forked tasks which haven't executed yet and which have empty user task stacks - Fix the debug.exception-trace=1 sysctl dumping of user stacks, which was broken by recent maccess changes" * tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Dump user space code correctly again x86/stacktrace: Fix reliable check for empty user task stacks x86/unwind/orc: Fix ORC for newly forked tasks x86, vmlinux.lds: Page-align end of ..page_aligned sections
-
Linus Torvalds authored
Merge tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull uprobe fix from Ingo Molnar: "Fix an interaction/regression between uprobes based shared library tracing & GDB" * tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
-
Linus Torvalds authored
Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fix from Ingo Molnar: "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's" * tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
-
Linus Torvalds authored
Merge tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull scheduler fixes from Ingo Molnar: "Fix a race introduced by the recent loadavg race fix, plus add a debug check for a hard to debug case of bogus wakeup function flags" * tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Warn if garbage is passed to default_wake_function() sched: Fix race against ptrace_freeze_trace()
-
Linus Torvalds authored
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull EFI fixes from Ingo Molnar: "Various EFI fixes: - Fix the layering violation in the use of the EFI runtime services availability mask in users of the 'efivars' abstraction - Revert build fix for GCC v4.8 which is no longer supported - Clean up some x86 EFI stub details, some of which are borderline bugs that copy around garbage into padding fields - let's fix these out of caution. - Fix build issues while working on RISC-V support - Avoid --whole-archive when linking the stub on arm64" * tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Revert "efi/x86: Fix build with gcc 4" efi/efivars: Expose RT service availability via efivars abstraction efi/libstub: Move the function prototypes to header file efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds efi/libstub/arm64: link stub lib.a conditionally efi/x86: Only copy upto the end of setup_header efi/x86: Remove unused variables
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fix from Steve French: "A fix for a recently discovered regression in rename to older servers caused by a recent patch" * tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6: Revert "cifs: Fix the target file was deleted when rename failed."
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ... -
Atish Patra authored
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a049 ("RISC-V: Init and Halt Code") Signed-off-by:
-
Xie He authored
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers "lapbether" and "hdlc_x25": 1) After skb_cow fails, kfree_skb should be called to drop a reference to the skb. But in both drivers, kfree_skb is not called. 2) skb_cow should be called before skb_push so that is can ensure the safety of skb_push. But in "lapbether", it is incorrectly called after skb_push. More details about these 2 issues: 1) The behavior of calling kfree_skb on failure is also the behavior of netif_rx, which is called by this function with "return netif_rx(skb);". So this function should follow this behavior, too. 2) In "lapbether", skb_cow is called after skb_push. This results in 2 logical issues: a) skb_push is not protected by skb_cow; b) An extra headroom of 1 byte is ensured after skb_push. This extra headroom has no use in this function. It also has no use in the upper-layer function that this function passes the skb to (x25_lapb_receive_frame in net/x25/x25_dev.c). So logically skb_cow should instead be called before skb_push. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:Xie He <xie.he.0141@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Subash Abhinov Kasiviswanathan authored
IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9 ("net: flush the softnet backlog in process context") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Atish Patra authored
Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services). Set the the maximum value to the pfn calculated from dram size. Signed-off-by:
-
Linus Torvalds authored
Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master Pull PCI fixes from Bjorn Helgaas: - Reject invalid IRQ 0 command line argument for virtio_mmio because IRQ 0 now generates warnings (Bjorn Helgaas) - Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms", which broke nouveau (Bjorn Helgaas) * tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" virtio-mmio: Reject invalid IRQ 0 command line argument
-
