- 11 Jun, 2024 1 commit
-
-
Guenter Roeck authored
If a driver calls device_get_match_data(), the .data pointer in its id data structures must not be NULL/0 because device_get_match_data() returns NULL if an entry is not found. Explain that in a comment to avoid confusion why this is required in this driver but not in other drivers. Cc: Daniel Matyas <daniel.matyas@analog.com> Acked-by:
Nuno Sa <nuno.sa@analog.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
- 10 Jun, 2024 7 commits
-
-
Eugene Shalygin authored
Provided and tested by a user in a GitHub PR [1]. [1] https://github.com/zeule/asus-ec-sensors/pull/56Signed-off-by:
Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20240608085146.572777-2-eugene.shalygin@gmail.comSigned-off-by:
-
Guenter Roeck authored
With SPD5118 chip detection for the most part handled by the i2c-smbus core using DMI information, the spd5118 driver no longer needs to auto-detect spd5118 compliant chips. Auto-detection by the driver is still needed on systems with no DMI support or on systems with more than eight DIMMs and can not be removed entirely. However, it affects boot time and introduces the risk of mis-identifying chips. Add configuration option to be able to disable it on systems where chip detection is handled outside the driver. Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Thomas Weißschuh <linux@weissschuh.net> Tested-by:
Armin Wolf <W_Armin@gmx.de> Signed-off-by:
-
Guenter Roeck authored
Detect (LP)DDR5 memory and instantiate the SPD5118 driver automatically. Suggested-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Guenter Roeck authored
Add support for reading SPD NVMEM data from SPD5118 (Jedec JESD300) compliant memory modules. NVMEM write operation is not supported. NVMEM support is optional. If CONFIG_NVMEM is disabled, the driver will still instantiate but not provide NVMEM attribute files. Reviewed-by:
-
Guenter Roeck authored
Add suspend/resume support to ensure that limit and configuration registers are updated and synchronized after a suspend/resume cycle. Cc: Armin Wolf <W_Armin@gmx.de> Cc: Stephen Horvath <s.horvath@outlook.com.au> Reviewed-by:
Stephen Horvath <s.horvath@outlook.com.au> Tested-by:
-
Guenter Roeck authored
Add support for SPD5118 (Jedec JESD300) compliant temperature sensors. Such sensors are typically found on DDR5 memory modules. Cc: René Rebe <rene@exactcode.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by:
-
Guenter Roeck authored
Add bindings for the SPD hub present in DDR5 modules. (https://www.jedec.org/standards-documents/docs/jesd300-5b01). Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
-
- 08 Jun, 2024 32 commits
-
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/asus_atk0110.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/corsair-cpro.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/hwmon/mr75203.o Add all missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20240607-md-drivers-hwmon-v1-1-1ea6d6fe61e3@quicinc.comSigned-off-by:
-
Javier Carrasco authored
Switch to the _scoped() version introduced in commit 365130fd ("device property: Introduce device_for_each_child_node_scoped()") to remove the need for manual calling of fwnode_handle_put() in the paths where the code exits the loop early. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240404-hwmon_device_for_each_child_node_scoped-v1-2-53997abde43c@gmail.comSigned-off-by:
-
Javier Carrasco authored
Switch to the _scoped() version introduced in commit 365130fd ("device property: Introduce device_for_each_child_node_scoped()") to remove the need for manual calling of fwnode_handle_put() in the paths where the code exits the loop early. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20240403203633.914389-32-afd@ti.comSigned-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
Andrew Davis authored
The function i2c_match_id() is used to fetch the matching ID from the i2c_device_id table. This is often used to then retrieve the matching driver_data. This can be done in one step with the helper i2c_get_match_data(). This helper has a couple other benefits: * It doesn't need the i2c_device_id passed in so we do not need to have that forward declared, allowing us to remove those or move the i2c_device_id table down to its more natural spot with the other module info. * It also checks for device match data, which allows for OF and ACPI based probing. That means we do not have to manually check those first and can remove those checks. Signed-off-by:
-
