- 22 Oct, 2013 3 commits
-
-
Mitch Williams authored
Correct math error when assigning MSI-X vectors to VFs. The vectors-per-vf value reported by the hardware already conveniently reports one less than the actual value. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
Not all VSIs have rings! Check to see if rings were actually allocated before freeing them. This prevents a panic when tx_rings[0] is not allocated. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
Hot path doesn't need read-flush after interrupt enable, and this flush really causes a lot of extra cpu utilization. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 21 Oct, 2013 33 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== ipv6: sit: Implement TSO/GSO support This patch series implements GSO/TSO support for SIT tunnels Broadcom bnx2x driver is now enabled for TSO support of SIT traffic Before patches : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patches : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 6006.97 1.86 5.48 0.608 1.795 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
bnx2x driver already handles TSO for GRE and IPIP, current code is the same for SIT. Performance results : (Note we are now limited by receiver, as it does not support GRO for SIT yet) Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 6006.97 1.86 5.48 0.608 1.795 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Now ipv6_gso_segment() is stackable, its relatively easy to implement GSO/TSO support for SIT tunnels Performance results, when segmentation is done after tunnel device (as no NIC is yet enabled for TSO SIT support) : Before patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 3168.31 4.81 4.64 2.988 2.877 After patch : lpq84:~# ./netperf -H 2002:af6:1153:: -Cc MIGRATED TCP STREAM TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:1153:: () port 0 AF_INET6 Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 87380 16384 16384 10.00 5525.00 7.76 5.17 2.763 1.840 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In order to support GSO on SIT tunnels, we need to make inet_gso_segment() stackable. It should not assume network header starts right after mac header. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This patch removes a duplicate define in drivers/atm/firestream.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This removes multiple duplicate definitions in drivers/net/ethernet/chelsio/cxgb3/regs.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
Reported by "make includecheck" Tested that drivers/net/ethernet/moxa/moxart_ether.c still compiles well on ARM Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
Reported by "make includecheck" Tested that C sources including this file still compile well on x86 Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eric W. Biederman says: ==================== ipv4: tcp_memcontrol and userns sysctls While looking into allowing the ipv4 sysctls to be used in a network namespace I stumbled upon the mess that is tcp_memcontrol. I remove the dead code, broken code, and excessive abstraction in the tcp_memcontrols then I clean up up and allow in the user namespace the per net ipv4 sysctls. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Allow unprivileged users to use: /proc/sys/net/ipv4/icmp_echo_ignore_all /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts /proc/sys/net/ipv4/icmp_ignore_bogus_error_response /proc/sys/net/ipv4/icmp_errors_use_inbound_ifaddr /proc/sys/net/ipv4/icmp_ratelimit /proc/sys/net/ipv4/icmp_ratemask /proc/sys/net/ipv4/ping_group_range /proc/sys/net/ipv4/tcp_ecn /proc/sys/net/ipv4/ip_local_ports_range These are occassionally handy and after a quick review I don't see any problems with unprivileged users using them. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Simplify maintenance of ipv4_net_table by using math to point the per net sysctls into the appropriate struct net, instead of manually reassinging all of the variables into hard coded table slots. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Replace the pointers in struct cg_proto with actual data fields and kill struct tcp_memcontrol as it is not fully redundant. This removes a confusing, unnecessary layer of abstraction. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
The code that is implemented is per memory cgroup not per netns, and having per netns bits is just confusing. Remove the per netns bits to make it easier to see what is really going on. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
The code is broken and does not constrain sysctl_tcp_mem as tcp_update_limit does. With the result that it allows the cgroup tcp memory limits to be bypassed. The semantics are broken as the settings are not per netns and are in a per netns table, and instead looks at current. Since the code is broken in both design and implementation and does not implement the functionality for which it was written remove it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
This function is never called. Remove it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jingoo Han says: ==================== net: ethernet: remove unnecessary pci_set_drvdata() part 2 Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound), the driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jingoo Han authored
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
This patch fixes the following warning: In file included from include/linux/skbuff.h:27:0, from include/linux/netfilter.h:5, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:20, from include/linux/init_task.h:14, from init/init_task.c:1: include/linux/net.h:243:14: warning: 'struct static_key' declared inside parameter list [enabled by default] struct static_key *done_key); on x86_64 allnoconfig, um defconfig and ia64 allmodconfig and maybe others as well. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Oct, 2013 4 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Antonio Quartulli says: ==================== this is another batch intended for net-next/linux-3.13. This pull request is a bit bigger than usual, but 6 patches are very small (three of them are about email updates).. Patch 1 is fixing a previous merge conflict resolution that went wrong (I realised that only now while checking other patches..). Patches from 2 to 4 that are updating our emails in all the proper files (Documentation/, headers and MAINTAINERS). Patches 5, 6 and 7 are bringing a big improvement to the TranslationTable component: it is now able to group non-mesh clients based on the VLAN they belong to. In this way a lot a new enhancements are now possible thanks to the fact that each batman-adv behaviour can be applied on a per VLAN basis. And, of course, in patches from 8 to 12 you have some of the enhancements I was talking about: - make the batman-Gateway selection VLAN dependent - make DAT (Distributed ARP Table) group ARP entries on a VLAN basis (this allows DAT to work even when the admin decided to use the same IP subnet on different VLANs) - make the AP-Isolation behaviour switchable on each VLAN independently - export VLAN specific attributes via sysfs. Switches like the AP-Isolation are now exported once per VLAN (backward compatibility of the sysfs interface has been preserved) Patches 13 and 14 are small code cleanups. Patch 15 is a minor improvement in the TT locking mechanism. Patches 16 and 17 are other enhancements to the TT component. Those allow a node to parse a "non-mesh client announcement message" and accept only those TT entries belonging to certain VLANs. Patch 18 exploits this parse&accept mechanism to make the Bridge Loop Avoidance component reject only TT entries connected to the VLAN where it is operating. Previous to this change, BLA was rejecting all the entries coming from any other Backbone node, regardless of the VLAN (for more details about how the Bridge Loop Avoidance works please check [1]). [1] http://www.open-mesh.org/projects/batman-adv/wiki/Bridge-loop-avoidance-II ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hannes Frederic Sowa says: ==================== This series implements support for delaying the initialization of secret keys, e.g. used for hashing, for as long as possible. This functionality is implemented by a new macro, net_get_random_bytes. I already used it to protect the socket hashes, the syncookie secret (most important) and the tcp_fastopen secrets. Changelog: v2) Use static_keys in net_get_random_once to have as minimal impact to the fast-path as possible. v3) added patch "static_key: WARN on usage before jump_label_init was called": Patch "x86/jump_label: expect default_nop if static_key gets enabled on boot-up" relaxes the checks for using static_key primitives before jump_label_init. So tighten them first. v4) Update changelog on the patch "static_key: WARN on usage before jump_label_init was called" Included patches: ipv4: split inet_ehashfn to hash functions per compilation unit ipv6: split inet6_ehashfn to hash functions per compilation unit static_key: WARN on usage before jump_label_init was called x86/jump_label: expect default_nop if static_key gets enabled on boot-up net: introduce new macro net_get_random_once inet: split syncookie keys for ipv4 and ipv6 and initialize with net_get_random_once inet: convert inet_ehash_secret and ipv6_hash_secret to net_get_random_once tcp: switch tcp_fastopen key generation to net_get_random_once net: switch net_secret key generation to net_get_random_once ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Changed key initialization of tcp_fastopen cookies to net_get_random_once. If the user sets a custom key net_get_random_once must be called at least once to ensure we don't overwrite the user provided key when the first cookie is generated later on. Cc: Yuchung Cheng <ycheng@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-