- 10 Aug, 2022 4 commits
-
-
Roberto Sassu authored
Commit 6e8ccb4f ("tools/bpf: properly account for libbfd variations") sets the linking flags depending on which flavor of the libbfd feature was detected. However, the flavors except libbfd cannot be detected, as they are not in the feature list. Complete the list of features to detect by adding libbfd-liberty and libbfd-liberty-z. Committer notes: Adjust conflict with with: 1e1613f6 ("tools bpftool: Don't display disassembler-four-args feature test") 600b7b26 ("tools bpftool: Fix compilation error with new binutils") Fixes: 6e8ccb4f ("tools/bpf: properly account for libbfd variations") Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andres Freund <andres@anarazel.de> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: bpf@vger.kernel.org Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: llvm@lists.linux.dev Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20220719170555.2576993-2-roberto.sassu@huawei.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Roberto Sassu authored
While separate features have been defined to determine which linking flags are required to use libbfd depending on the distribution (libbfd, libbfd-liberty and libbfd-liberty-z), the same has not been done for other features requiring linking to libbfd. For example, disassembler-four-args requires linking to libbfd too, but it should use the right linking flags. If not all the required ones are specified, e.g. -liberty, detection will always fail even if the feature is available. Instead of creating new features, similarly to libbfd, simply retry detection with the different set of flags until detection succeeds (or fails, if the libraries are missing). In this way, feature detection is transparent for the users of this building mechanism (e.g. perf), and those users don't have for example to set an appropriate value for the FEATURE_CHECK_LDFLAGS-disassembler-four-args variable. The number of retries and features for which the retry mechanism is implemented is low enough to make the increase in the complexity of Makefile negligible. Tested with perf and bpftool on Ubuntu 20.04.4 LTS, Fedora 36 and openSUSE Tumbleweed. Committer notes: Do the retry for disassembler-init-styled as well. Signed-off-by:
-
Claire Jensen authored
Add field checking tests for perf stat JSON output. Sanity checks the expected number of fields are present, that the expected keys are present and they have the correct values. Committer notes: Had to fix this: - $(INSTALL) tests/shell/lib/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib' \ + $(INSTALL) tests/shell/lib/*.sh '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/tests/shell/lib'; \ Committer testing: [root@quaco ~]# perf test json 90: perf stat JSON output linter : Ok [root@quaco ~]# set -o vi [root@quaco ~]# perf test -v json 90: perf stat JSON output linter : --- start --- test child forked, pid 560794 Checking json output: no args [Success] Checking json output: system wide [Success] Checking json output: system wide Checking json output: system wide no aggregation [Success] Checking json output: interval [Success] Checking json output: event [Success] Checking json output: per core [Success] Checking json output: per thread [Success] Checking json output: per die [Success] Checking json output: per node [Success] Checking json output: per socket [Success] test child finished with 0 ---- end ---- perf stat JSON output linter: Ok [root@quaco ~]# Signed-off-by:
Claire Jensen <cjense@google.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
Ian Rogers <irogers@google.com> Signed-off-by:
-
Claire Jensen authored
CSV output is tricky to format and column layout changes are susceptible to breaking parsers. New JSON-formatted output has variable names to identify fields that are consistent and informative, making the output parseable. CSV output example: 1.20,msec,task-clock:u,1204272,100.00,0.697,CPUs utilized 0,,context-switches:u,1204272,100.00,0.000,/sec 0,,cpu-migrations:u,1204272,100.00,0.000,/sec 70,,page-faults:u,1204272,100.00,58.126,K/sec JSON output example: {"counter-value" : "3805.723968", "unit" : "msec", "event" : "cpu-clock", "event-runtime" : 3805731510100.00, "pcnt-running" : 100.00, "metric-value" : 4.007571, "metric-unit" : "CPUs utilized"} {"counter-value" : "6166.000000", "unit" : "", "event" : "context-switches", "event-runtime" : 3805723045100.00, "pcnt-running" : 100.00, "metric-value" : 1.620191, "metric-unit" : "K/sec"} {"counter-value" : "466.000000", "unit" : "", "event" : "cpu-migrations", "event-runtime" : 3805727613100.00, "pcnt-running" : 100.00, "metric-value" : 122.447136, "metric-unit" : "/sec"} {"counter-value" : "208.000000", "unit" : "", "event" : "page-faults", "event-runtime" : 3805726799100.00, "pcnt-running" : 100.00, "metric-value" : 54.654516, "metric-unit" : "/sec"} Also added documentation for JSON option. There is some tidy up of CSV code including a potential memory over run in the os.nfields set up. To facilitate this an AGGR_MAX value is added. Committer notes: Fixed up using PRIu64 to format u64 values, not %lu. Committer testing: ⬢[acme@toolbox perf]$ perf stat -j sleep 1 {"counter-value" : "0.731750", "unit" : "msec", "event" : "task-clock:u", "event-runtime" : 731750, "pcnt-running" : 100.00, "metric-value" : 0.000731, "metric-unit" : "CPUs utilized"} {"counter-value" : "0.000000", "unit" : "", "event" : "context-switches:u", "event-runtime" : 731750, "pcnt-running" : 100.00, "metric-value" : 0.000000, "metric-unit" : "/sec"} {"counter-value" : "0.000000", "unit" : "", "event" : "cpu-migrations:u", "event-runtime" : 731750, "pcnt-running" : 100.00, "metric-value" : 0.000000, "metric-unit" : "/sec"} {"counter-value" : "75.000000", "unit" : "", "event" : "page-faults:u", "event-runtime" : 731750, "pcnt-running" : 100.00, "metric-value" : 102.494021, "metric-unit" : "K/sec"} {"counter-value" : "578765.000000", "unit" : "", "event" : "cycles:u", "event-runtime" : 379366, "pcnt-running" : 49.00, "metric-value" : 0.790933, "metric-unit" : "GHz"} {"counter-value" : "1298.000000", "unit" : "", "event" : "stalled-cycles-frontend:u", "event-runtime" : 768020, "pcnt-running" : 100.00, "metric-value" : 0.224271, "metric-unit" : "frontend cycles idle"} {"counter-value" : "21984.000000", "unit" : "", "event" : "stalled-cycles-backend:u", "event-runtime" : 768020, "pcnt-running" : 100.00, "metric-value" : 3.798433, "metric-unit" : "backend cycles idle"} {"counter-value" : "468197.000000", "unit" : "", "event" : "instructions:u", "event-runtime" : 768020, "pcnt-running" : 100.00, "metric-value" : 0.808959, "metric-unit" : "insn per cycle"} {"metric-value" : 0.046955, "metric-unit" : "stalled cycles per insn"} {"counter-value" : "103335.000000", "unit" : "", "event" : "branches:u", "event-runtime" : 768020, "pcnt-running" : 100.00, "metric-value" : 141.216262, "metric-unit" : "M/sec"} {"counter-value" : "2381.000000", "unit" : "", "event" : "branch-misses:u", "event-runtime" : 388654, "pcnt-running" : 50.00, "metric-value" : 2.304156, "metric-unit" : "of all branches"} ⬢[acme@toolbox perf]$ Signed-off-by:
-
- 09 Aug, 2022 34 commits
-
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd updates from Steve French: - fixes for memory access bugs (out of bounds access, oops, leak) - multichannel fixes - session disconnect performance improvement, and session register improvement - cleanup * tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix heap-based overflow in set_ntacl_dacl() ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT ksmbd: prevent out of bound read for SMB2_WRITE ksmbd: fix use-after-free bug in smb2_tree_disconect ksmbd: fix memory leak in smb2_handle_negotiate ksmbd: fix racy issue while destroying session on multichannel ksmbd: use wait_event instead of schedule_timeout() ksmbd: fix kernel oops from idr_remove() ksmbd: add channel rwlock ksmbd: replace sessions list in connection with xarray MAINTAINERS: ksmbd: add entry for documentation ksmbd: remove unused ksmbd_share_configs_cleanup function
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more iov_iter updates from Al Viro: - more new_sync_{read,write}() speedups - ITER_UBUF introduction - ITER_PIPE cleanups - unification of iov_iter_get_pages/iov_iter_get_pages_alloc and switching them to advancing semantics - making ITER_PIPE take high-order pages without splitting them - handling copy_page_from_iter() for high-order pages properly * tag 'pull-work.iov_iter-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits) fix copy_page_from_iter() for compound destinations hugetlbfs: copy_page_to_iter() can deal with compound pages copy_page_to_iter(): don't split high-order page in case of ITER_PIPE expand those iov_iter_advance()... pipe_get_pages(): switch to append_pipe() get rid of non-advancing variants ceph: switch the last caller of iov_iter_get_pages_alloc() 9p: convert to advancing variant of iov_iter_get_pages_alloc() af_alg_make_sg(): switch to advancing variant of iov_iter_get_pages() iter_to_pipe(): switch to advancing variant of iov_iter_get_pages() block: convert to advancing variants of iov_iter_get_pages{,_alloc}() iov_iter: advancing variants of iov_iter_get_pages{,_alloc}() iov_iter: saner helper for page array allocation fold __pipe_get_pages() into pipe_get_pages() ITER_XARRAY: don't open-code DIV_ROUND_UP() unify the rest of iov_iter_get_pages()/iov_iter_get_pages_alloc() guts unify xarray_get_pages() and xarray_get_pages_alloc() unify pipe_get_pages() and pipe_get_pages_alloc() iov_iter_get_pages(): sanity-check arguments iov_iter_get_pages_alloc(): lift freeing pages array on failure exits into wrapper ... -
Al Viro authored
had been broken for ITER_BVEC et.al. since ever (OK, v3.17 when ITER_BVEC had first appeared)... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... since April 2021 Signed-off-by: -
Al Viro authored
... just shove it into one pipe_buffer. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
now that we are advancing the iterator, there's no need to treat the first page separately - just call append_pipe() in a loop. Signed-off-by: -
Al Viro authored
mechanical change; will be further massaged in subsequent commits Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
-
Al Viro authored
here nothing even looks at the iov_iter after the call, so we couldn't care less whether it advances or not. Reviewed-by:
-
Al Viro authored
that one is somewhat clumsier than usual and needs serious testing. Signed-off-by: -
Al Viro authored
... and adjust the callers Reviewed-by:
-
Al Viro authored
... and untangle the cleanup on failure to add into pipe. Reviewed-by:
-
Al Viro authored
... doing revert if we end up not using some pages Signed-off-by: -
Al Viro authored
Most of the users immediately follow successful iov_iter_get_pages() with advancing by the amount it had returned. Provide inline wrappers doing that, convert trivial open-coded uses of those. BTW, iov_iter_get_pages() never returns more than it had been asked to; such checks in cifs ought to be removed someday... Reviewed-by:
-
Al Viro authored
All call sites of get_pages_array() are essenitally identical now. Replace with common helper... Returns number of slots available in resulting array or 0 on OOM; it's up to the caller to make sure it doesn't ask to zero-entry array (i.e. neither maxpages nor size are allowed to be zero). Reviewed-by:
-
Al Viro authored
... and don't mangle maxsize there - turn the loop into counting one instead. Easier to see that we won't run out of array that way. Note that special treatment of the partial buffer in that thing is an artifact of the non-advancing semantics of iov_iter_get_pages() - if not for that, it would be append_pipe(), same as the body of the loop that follows it. IOW, once we make iov_iter_get_pages() advancing, the whole thing will turn into calculate how many pages do we want allocate an array (if needed) call append_pipe() that many times. Reviewed-by:
-
Al Viro authored
Reviewed-by:
-
Al Viro authored
same as for pipes and xarrays; after that iov_iter_get_pages() becomes a wrapper for __iov_iter_get_pages_alloc(). Signed-off-by: -
Al Viro authored
same as for pipes Reviewed-by:
-
Al Viro authored
The differences between those two are * pipe_get_pages() gets a non-NULL struct page ** value pointing to preallocated array + array size. * pipe_get_pages_alloc() gets an address of struct page ** variable that contains NULL, allocates the array and (on success) stores its address in that variable. Not hard to combine - always pass struct page ***, have the previous pipe_get_pages_alloc() caller pass ~0U as cap for array size. Reviewed-by:
-
Al Viro authored
zero maxpages is bogus, but best treated as "just return 0"; NULL pages, OTOH, should be treated as a hard bug. get rid of now completely useless checks in xarray_get_pages{,_alloc}(). Reviewed-by: -
Al Viro authored
Incidentally, ITER_XARRAY did *not* free the sucker in case when iter_xarray_populate_pages() returned 0... Reviewed-by:
-
Al Viro authored
All their callers are next to each other; all of them want the total amount of pages and, possibly, the offset in the partial final buffer. Combine into a new helper (pipe_npages()), fix the bogosity in pipe_space_for_user(), while we are at it. Signed-off-by: -
Al Viro authored
We often need to find whether the last buffer is anon or not, and currently it's rather clumsy: check if ->iov_offset is non-zero (i.e. that pipe is not empty) if so, get the corresponding pipe_buffer and check its ->ops if it's &default_pipe_buf_ops, we have an anon buffer. Let's replace the use of ->iov_offset (which is nowhere near similar to its role for other flavours) with signed field (->last_offset), with the following rules: empty, no buffers occupied: 0 anon, with bytes up to N-1 filled: N zero-copy, with bytes up to N-1 filled: -N That way abs(i->last_offset) is equal to what used to be in i->iov_offset and empty vs. anon vs. zero-copy can be distinguished by the sign of i->last_offset. Checks for "should we extend the last buffer or should we start a new one?" become easier to follow that way. Note that most of the operations can only be done in a sane state - i.e. when the pipe has nothing past the current position of iterator. About the only thing that could be done outside of that state is iov_iter_advance(), which transitions to the sane state by truncating the pipe. There are only two cases where we leave the sane state: 1) iov_iter_get_pages()/iov_iter_get_pages_alloc(). Will be dealt with later, when we make get_pages advancing - the callers are actually happier that way. 2) iov_iter copied, then something is put into the copy. Since they share the underlying pipe, the original gets behind. When we decide that we are done with the copy (original is not usable until then) we advance the original. direct_io used to be done that way; nowadays it operates on the original and we do iov_iter_revert() to discard the excessive data. At the moment there's nothing in the kernel that could do that to ITER_PIPE iterators, so this reason for insane state is theoretical right now. Signed-off-by: -
Al Viro authored
Fold pipe_truncate() into it, clean up. We can release buffers in the same loop where we walk backwards to the iterator beginning looking for the place where the new position will be. Signed-off-by: -
Al Viro authored
instead of setting ->iov_offset for new position and calling pipe_truncate() to adjust ->len of the last buffer and discard everything after it, adjust ->len at the same time we set ->iov_offset and use pipe_discard_from() to deal with buffers past that. Signed-off-by: -
Al Viro authored
it's only used to get to the partial buffer we can add to, and that's always the last one, i.e. pipe->head - 1. Signed-off-by: -
Al Viro authored
Expand the only remaining call of push_pipe() (in __pipe_get_pages()), combine it with the page-collecting loop there. Note that the only reason it's not a loop doing append_pipe() is that append_pipe() is advancing, while iov_iter_get_pages() is not. As soon as it switches to saner semantics, this thing will switch to using append_pipe(). Signed-off-by: -
Al Viro authored
New helper: append_pipe(). Extends the last buffer if possible, allocates a new one otherwise. Returns page and offset in it on success, NULL on failure. iov_iter is advanced past the data we've got. Use that instead of push_pipe() in copy-to-pipe primitives; they get simpler that way. Handling of short copy (in "mc" one) is done simply by iov_iter_revert() - iov_iter is in consistent state after that one, so we can use that. [Fix for braino caught by Liu Xinpeng <liuxp11@chinatelecom.cn> folded in] [another braino fix, this time in copy_pipe_to_iter() and pipe_zero(); caught by testcase from Hugh Dickins] Signed-off-by: -
Al Viro authored
There are only two kinds of pipe_buffer in the area used by ITER_PIPE. 1) anonymous - copy_to_iter() et.al. end up creating those and copying data there. They have zero ->offset, and their ->ops points to default_pipe_page_ops. 2) zero-copy ones - those come from copy_page_to_iter(), and page comes from caller. ->offset is also caller-supplied - it might be non-zero. ->ops points to page_cache_pipe_buf_ops. Move creation and insertion of those into helpers - push_anon(pipe, size) and push_page(pipe, page, offset, size) resp., separating them from the "could we avoid creating a new buffer by merging with the current head?" logics. Acked-by:
-
Al Viro authored
pipe_buffer instances of a pipe are organized as a ring buffer, with power-of-2 size. Indices are kept *not* reduced modulo ring size, so the buffer refered to by index N is pipe->bufs[N & (pipe->ring_size - 1)]. Ring size can change over the lifetime of a pipe, but not while the pipe is locked. So for any iov_iter primitives it's a constant. Original conversion of pipes to this layout went overboard trying to microoptimize that - calculating pipe->ring_size - 1, storing it in a local variable and using through the function. In some cases it might be warranted, but most of the times it only obfuscates what's going on in there. Introduce a helper (pipe_buf(pipe, N)) that would encapsulate that and use it in the obvious cases. More will follow... Reviewed-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
-
Al Viro authored
Use pipe_discard_from() explicitly in generic_file_read_iter(); don't bother with rather non-obvious use of iov_iter_advance() in there. Reviewed-by:
-
Al Viro authored
Reviewed-by:
-
Al Viro authored
Equivalent of single-segment iovec. Initialized by iov_iter_ubuf(), checked for by iter_is_ubuf(), otherwise behaves like ITER_IOVEC ones. We are going to expose the things like ->write_iter() et.al. to those in subsequent commits. New predicate (user_backed_iter()) that is true for ITER_IOVEC and ITER_UBUF; places like direct-IO handling should use that for checking that pages we modify after getting them from iov_iter_get_pages() would need to be dirtied. DO NOT assume that replacing iter_is_iovec() with user_backed_iter() will solve all problems - there's code that uses iter_is_iovec() to decide how to poke around in iov_iter guts and for that the predicate replacement obviously won't suffice. Signed-off-by:
-
- 08 Aug, 2022 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull remoteproc updates from Bjorn Andersson: "This introduces support for the remoteproc on Mediatek MT8188, and enables caches for MT8186 SCP. It adds support for PRU cores found on the TI K3 AM62x SoCs. It moves the recovery work after a firmware crash to an unbound workqueue, to allow recovery to happen in parallel. A new DMA API is introduced to release dma_mem for a device. It adds support a panic handler for the Qualcomm modem remoteproc, with the goal of having caches flushed in memory dumps for post-mortem debugging and it introduces a mechanism to wait for the modem firmware on SM8450 to decrypt part of its memory for post-mortem debugging. Qualcomm sysmon is restricted to only inform remote processors about peers that are actually running, to avoid a race where Linux tries to notify a recovering remote processor about its peers new state. A mechanism for waiting for the sysmon connection to be established is also introduced, to avoid out-of-sync updates for rapidly restarting remote processors. A number of Devicetree binding cleanups and conversions to YAML are introduced, to facilitate Devicetree validation. Lastly it introduces a number of smaller fixes and cleanups in the core and a few different drivers" * tag 'rproc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (42 commits) remoteproc: qcom_q6v5_pas: Do not fail if regulators are not found drivers/remoteproc: fix repeated words in comments remoteproc: Directly use ida_alloc()/free() remoteproc: Use unbounded workqueue for recovery work remoteproc: using pm_runtime_resume_and_get instead of pm_runtime_get_sync remoteproc: qcom_q6v5_pas: Deal silently with optional px and cx regulators remoteproc: sysmon: Send sysmon state only for running rprocs remoteproc: sysmon: Wait for SSCTL service to come up remoteproc: qcom: q6v5: Set q6 state to offline on receiving wdog irq remoteproc: qcom: pas: Check if coredump is enabled remoteproc: qcom: pas: Mark devices as wakeup capable remoteproc: qcom: pas: Mark va as io memory remoteproc: qcom: pas: Add decrypt shutdown support for modem remoteproc: qcom: q6v5-mss: add powerdomains to MSM8996 config remoteproc: qcom_q6v5: Introduce panic handler for MSS remoteproc: qcom_q6v5_mss: Update MBA log info remoteproc: qcom: correct kerneldoc remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use remoteproc: qcom: using pm_runtime_resume_and_get to simplify the code remoteproc: mediatek: Support MT8188 SCP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linuxLinus Torvalds authored
Pull rpmsg updates from Bjorn Andersson: "This contains fixes and cleanups in the rpmsg core, Qualcomm SMD and GLINK drivers, a circular lock dependency in the Mediatek driver and a possible race condition in the rpmsg_char driver is resolved" * tag 'rpmsg-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: convert sysfs snprintf to sysfs_emit rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge rpmsg: qcom: correct kerneldoc rpmsg: qcom: glink: remove unused name rpmsg: qcom: glink: replace strncpy() with strscpy_pad() rpmsg: Strcpy is not safe, use strscpy_pad() instead rpmsg: Fix possible refcount leak in rpmsg_register_device_override() rpmsg: Fix parameter naming for announce_create/destroy ops rpmsg: mtk_rpmsg: Fix circular locking dependency rpmsg: char: Add mutex protection for rpmsg_eptdev_open()
-
