- 14 Sep, 2017 27 commits
-
-
Thomas Gleixner authored
Get rid of the hodgepodge which tries to be smart about perf being unavailable and error printout rate limiting. That's all not required simply because this is never invoked when the perf NMI watchdog is not functional. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Don Zickus <dzickus@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Ulrich Obergfell <uobergfe@redhat.com> Link: http://lkml.kernel.org/r/20170912194148.259651788@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Thomas Gleixner authored
watchdog_nmi_enable() is an unparseable mess, Provide a clean perf specific implementation, which will be used when the existing setup/teardown mess is replaced. Signed-off-by:
-
Thomas Gleixner authored
Use the init time detection of the perf NMI watchdog to determine whether the perf NMI watchdog is functional. If not disable it permanentely. It won't come back magically at runtime. Signed-off-by:
-
Thomas Gleixner authored
The watchdog tries to create perf events even after it figured out that perf is not functional or the requested event is not supported. That's braindead as this can be done once at init time and if not supported the NMI watchdog can be turned off unconditonally. Implement the perf hardlockup detector functionality for that. This creates a new event create function, which will replace the unholy mess of the existing one in later patches. Signed-off-by:
-
Thomas Gleixner authored
Letting user space poke directly at variables which are used at run time is stupid and causes a lot of race conditions and other issues. Seperate the user variables and on change invoke the reconfiguration, which then stops the watchdogs, reevaluates the new user value and restarts the watchdogs with the new parameters. Signed-off-by:
-
Thomas Gleixner authored
Both the perf reconfiguration and the powerpc watchdog_nmi_reconfigure() need to be done in two steps. 1) Stop all NMIs 2) Read the new parameters and start NMIs Right now watchdog_nmi_reconfigure() is a combination of both. To allow a clean reconfiguration add a 'run' argument and split the functionality in powerpc. Signed-off-by: -
Thomas Gleixner authored
Reflect that these variables are user interface related and remove the whitespace damage in the sysctl table while at it. Signed-off-by:
-
Thomas Gleixner authored
The sysctl of the nmi_watchdog file prevents writes by setting: min = max = 0 if none of the users is enabled. That involves ifdeffery and is competely non obvious. If none of the facilities is enabeld, then the file can simply be made read only. Move the ifdeffery into the header and use a constant for file permissions. Signed-off-by: -
Thomas Gleixner authored
Having the same #ifdef in various places does not make it more readable. Collect stuff into one place. Signed-off-by:
-
Thomas Gleixner authored
Use a single function to update sysctl changes. This is not a high frequency user space interface and it's root only. Preparatory patch to cleanup the sysctl variable handling. Signed-off-by:
-
Thomas Gleixner authored
The lockup detector reconfiguration tears down all watchdog threads when the watchdog is disabled and sets them up again when its enabled. That's a pointless exercise. The watchdog threads are not consuming an insane amount of resources, so it's enough to set them up at init time and keep them in parked position when the watchdog is disabled and unpark them when it is reenabled. The smpboot thread infrastructure takes care of keeping the force parked threads in place even across cpu hotplug. Aside of that the code implements the park/unpark facility of smp hotplug threads on its own, which is even more pointless. We have functionality in the smpboot thread code to do so. Use the new thread management functions and get rid of the unholy mess. Signed-off-by:
-
Thomas Gleixner authored
The lockup detector reconfiguration tears down all watchdog threads when the watchdog is disabled and sets them up again when its enabled. That's a pointless exercise. The watchdog threads are not consuming an insane amount of resources, so it's enough to set them up at init time and keep them in parked position when the watchdog is disabled and unpark them when it is reenabled. The smpboot thread infrastructure takes care of keeping the force parked threads in place even across cpu hotplug. Another horrible mechanism are the open coded park/unpark loops which are used for reconfiguration of the watchdog. The smpboot infrastructure allows exactly the same via smpboot_update_cpumask_thread_percpu(), which is cpu hotplug safe. Using that instead of the open coded loops allows to get rid of the hotplug locking mess in the watchdog code. Implement a clean infrastructure which allows to replace the open coded nonsense. Signed-off-by:
-
Thomas Gleixner authored
smpboot_update_cpumask_threads_percpu() allocates a temporary cpumask at runtime. This is suboptimal because the call site needs more code size for proper error handling than a statically allocated temporary mask requires data size. Add static temporary cpumask. The function is globaly serialized, so no further protection required. Remove the half baken error handling in the watchdog code and get rid of the export as there are no in tree modular users of that function. Signed-off-by:
-
Thomas Gleixner authored
Split the write part of the cpumask proc handler out into a separate helper to avoid deep indentation. This also reduces the patch complexity in the following cleanups. Signed-off-by:
-
Thomas Gleixner authored
The #ifdef maze in this file is horrible, group stuff at least a bit so one can figure out what belongs to what. Signed-off-by:
-
Thomas Gleixner authored
Having stub functions which take a full page is not helping the readablility of code. Condense them and move the doubled #ifdef variant into the SYSFS section. Signed-off-by:
-
Thomas Gleixner authored
Commit: b94f5118 ("kernel/watchdog: prevent false hardlockup on overloaded system") tries to fix the following issue: proc_write() set_sample_period() <--- New sample period becoms visible <----- Broken starts proc_watchdog_update() watchdog_enable_all_cpus() watchdog_hrtimer_fn() update_watchdog_all_cpus() restart_timer(sample_period) watchdog_park_threads() thread->park() disable_nmi() <----- Broken ends The reason why this is broken is that the update of the watchdog threshold becomes immediately effective and visible for the hrtimer function which uses that value to rearm the timer. But the NMI/perf side still uses the old value up to the point where it is disabled. If the rate has been lowered then the NMI can run fast enough to 'detect' a hard lockup because the timer has not fired due to the longer period. The patch 'fixed' this by adding a variable: proc_write() set_sample_period() <----- Broken starts proc_watchdog_update() watchdog_enable_all_cpus() watchdog_hrtimer_fn() update_watchdog_all_cpus() restart_timer(sample_period) watchdog_park_threads() park_in_progress = 1 <----- Broken ends nmi_watchdog() if (park_in_progress) return; The only effect of this variable was to make the window where the breakage can hit small enough that it was not longer observable in testing. From a correctness point of view it is a pointless bandaid which merily papers over the root cause: the unsychronized update of the variable. Looking deeper into the related code pathes unearthed similar problems in the watchdog_start()/stop() functions. watchdog_start() perf_nmi_event_start() hrtimer_start() watchdog_stop() hrtimer_cancel() perf_nmi_event_stop() In both cases the call order is wrong because if the tasks gets preempted or the VM gets scheduled out long enough after the first call, then there is a chance that the next NMI will see a stale hrtimer interrupt count and trigger a false positive hard lockup splat. Get rid of park_in_progress so the code can be gradually deobfuscated and pruned from several layers of duct tape papering over the root cause, which has been either ignored or not understood at all. Once this is removed the underlying problem will be fixed by rewriting the proc interface to do a proper synchronized update. Address the start/stop() ordering problem as well by reverting the call order, so this part is at least correct now. Signed-off-by:
-
Thomas Gleixner authored
The following deadlock is possible in the watchdog hotplug code: cpus_write_lock() ... takedown_cpu() smpboot_park_threads() smpboot_park_thread() kthread_park() ->park() := watchdog_disable() watchdog_nmi_disable() perf_event_release_kernel(); put_event() _free_event() ->destroy() := hw_perf_event_destroy() x86_release_hardware() release_ds_buffers() get_online_cpus() when a per cpu watchdog perf event is destroyed which drops the last reference to the PMU hardware. The cleanup code there invokes get_online_cpus() which instantly deadlocks because the hotplug percpu rwsem is write locked. To solve this add a deferring mechanism: cpus_write_lock() kthread_park() watchdog_nmi_disable(deferred) perf_event_disable(event); move_event_to_deferred(event); .... cpus_write_unlock() cleaup_deferred_events() perf_event_release_kernel() This is still properly serialized against concurrent hotplug via the cpu_add_remove_lock, which is held by the task which initiated the hotplug event. This is also used to handle event destruction when the watchdog threads are parked via other mechanisms than CPU hotplug. Analyzed-by:Peter Zijlstra <peterz@infradead.org> Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Thomas Gleixner authored
The self disabling feature is broken vs. CPU hotplug locking: CPU 0 CPU 1 cpus_write_lock(); cpu_up(1) wait_for_completion() .... unpark_watchdog() ->unpark() perf_event_create() <- fails watchdog_enable &= ~NMI_WATCHDOG; .... cpus_write_unlock(); CPU 2 cpus_write_lock() cpu_down(2) wait_for_completion() wakeup(watchdog); watchdog() if (!(watchdog_enable & NMI_WATCHDOG)) watchdog_nmi_disable() perf_event_disable() .... cpus_read_lock(); stop_smpboot_threads() park_watchdog(); wait_for_completion(watchdog->parked); Result: End of hotplug and instantaneous full lockup of the machine. There is a similar problem with disabling the watchdog via the user space interface as the sysctl function fiddles with watchdog_enable directly. It's very debatable whether this is required at all. If the watchdog works nicely on N CPUs and it fails to enable on the N + 1 CPU either during hotplug or because the user space interface disabled it via sysctl cpumask and then some perf user grabbed the counter which is then unavailable for the watchdog when the sysctl cpumask gets changed back. There is no real justification for this. One of the reasons WHY this is done is the utter stupidity of the init code of the perf NMI watchdog. Instead of checking upfront at boot whether PERF is available and functional at all, it just does this check at run time over and over when user space fiddles with the sysctl. That's broken beyond repair along with the idiotic error code dependent warn level printks and the even more silly printk rate limiting. If the init code checks whether perf works at boot time, then this mess can be more or less avoided completely. Perf does not come magically into life at runtime. Brain usage while coding is overrated. Remove the cruft and add a temporary safe guard which gets removed later. Signed-off-by:
-
Thomas Gleixner authored
The function is only used by the KVM init code. Mark it __init to prevent creative abuse. Signed-off-by:
-
Thomas Gleixner authored
Following patches will use the mutex for other purposes as well. Rename it as it is not longer a proc specific thing. Signed-off-by:
-
Thomas Gleixner authored
The watchdog proc interface causes extensive recursive locking of the CPU hotplug percpu rwsem, which is deadlock prone. Replace the get/put_online_cpus() pairs with cpu_hotplug_disable()/enable() calls for now. Later patches will remove that requirement completely. Reported-by:
-
Thomas Gleixner authored
This interface has several issues: - It's causing recursive locking of the hotplug lock. - It's complete overkill to teardown all threads and then recreate them The same can be achieved with the simple hardlockup_detector_perf_stop / restart() interfaces. The abuse from the busy looping poweroff() loop of PARISC has been solved as well. Remove the cruft. Signed-off-by:
-
Thomas Gleixner authored
The broken lockup_detector_suspend/resume() interface is going away. Use the new lockup_detector_soft_poweroff() interface to stop the watchdog from the busy looping power off routine. Signed-off-by:
-
Thomas Gleixner authored
PARISC has a a busy looping power off routine. If the watchdog is enabled the watchdog timer will still fire, but the thread is not running, which causes the softlockup watchdog to trigger. Provide a interface which allows to turn the watchdog off. Signed-off-by:
-
Peter Zijlstra authored
The lockup_detector_suspend/resume() interface is broken in several ways especially as it results in recursive locking of the CPU hotplug lock. Use the new stop/restart interface in the perf NMI watchdog to temporarily disable and reenable the already active watchdog events. That's enough to handle it. Signed-off-by:
-
Peter Zijlstra authored
Provide an interface to stop and restart perf NMI watchdog events on all CPUs. This is only usable during init and especially for handling the perf HT bug on Intel machines. It's safe to use it this way as nothing can start/stop the NMI watchdog in parallel. Signed-off-by:
-
- 13 Sep, 2017 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A handful of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf stat: Wait for the correct child perf tools: Support running perf binaries with a dash in their name perf config: Check not only section->from_system_config but also item's perf ui progress: Fix progress update perf ui progress: Make sure we always define step value perf tools: Open perf.data with O_CLOEXEC flag tools lib api: Fix make DEBUG=1 build perf tests: Fix compile when libunwind's unwind.h is available tools include linux: Guard against redefinition of some macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three CPU hotplug related fixes and a debugging improvement" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Add debugfs knob for "sched_debug" sched/core: WARN() when migrating to an offline CPU sched/fair: Plug hole between hotplug and active_load_balance() sched/fair: Avoid newidle balance for !active CPUs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "The main changes are the PCID fixes from Andy, but there's also two hyperv fixes and two paravirt updates" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/hyper-v: Remove duplicated HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED definition x86/hyper-V: Allocate the IDT entry early in boot paravirt: Switch maintainer x86/paravirt: Remove no longer used paravirt functions x86/mm/64: Initialize CR4.PCIDE early x86/hibernate/64: Mask off CR3's PCID bits in the saved CR3 x86/mm: Get rid of VM_BUG_ON in switch_tlb_irqs_off()
-
git://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC fixlet from Stafford Horne: "Fix warning for upcoming work to remove linux/vmalloc.h from asm-generic/io.h" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: add forward declaration for struct vm_area_struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull modules updates from Jessica Yu: "Summary of modules changes for the 4.14 merge window: - minor code cleanups and fixes - modpost: avoid building modules that have names that exceed the size of the name field in struct module" * tag 'modules-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Remove const attribute from alias for MODULE_DEVICE_TABLE module: fix ddebug_remove_module() modpost: abort if module name is too long -
Linus Torvalds authored
Another merge window, another MAINTAINERS file disaster. People have serious problems with the alphabet and sorting, and poor Jérôme Glisse and Radim Krčmář get their names mangled by locale issues, turning them into some mangled mess (probably others do too, but those two stood out when sorting things again). And we now have two copies of the same 'AS3645A LED FLASH CONTROLLER DRIVER' in the tree and in the MAINTAINERS file, but that's a separate issue - the duplication is real, and I left them as two entries for the same name. This does not try to sort the actual section pattern entries, although I may end up doing that later. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Subsystem: - remove .open() and .release() RTC ops - constify i2c_device_id New driver: - Realtek RTD1295 - Android emulator (goldfish) RTC Drivers: - ds1307: Beginning of a huge cleanup - s35390a: handle invalid RTC time - sun6i: external oscillator gate support" * tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits) rtc: ds1307: use octal permissions rtc: ds1307: fix braces rtc: ds1307: fix alignments and blank lines rtc: ds1307: use BIT rtc: ds1307: use u32 rtc: ds1307: use sizeof rtc: ds1307: remove regs member rtc: Add Realtek RTD1295 dt-bindings: rtc: Add Realtek RTD1295 rtc: sun6i: Add support for the external oscillator gate rtc: goldfish: Add RTC driver for Android emulator dt-bindings: Add device tree binding for Goldfish RTC driver rtc: ds1307: add basic support for ds1341 chip rtc: ds1307: remove member nvram_offset from struct ds1307 rtc: ds1307: factor out offset to struct chip_desc rtc: ds1307: factor out rtc_ops to struct chip_desc rtc: ds1307: factor out irq_handler to struct chip_desc rtc: ds1307: improve irq setup rtc: ds1307: constify struct chip_desc variables rtc: ds1307: improve trickle charger initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Most of the commits are trivial cleanup patches, while one commit is a significant fix for the race at ALSA sequencer that was spotted by syzkaller" * tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Cancel pending autoload work at unbinding device ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex() ALSA: asihpi: Kill BUG_ON() usages ALSA: core: Use %pS printk format for direct addresses ALSA: ymfpci: Use common error handling code in snd_ymfpci_create() ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe() ALSA: 6fire: Use common error handling code in usb6fire_chip_probe() ALSA: usx2y: Use common error handling code in submit_urbs() ALSA: us122l: Use common error handling code in us122l_create_card() ALSA: hdspm: Use common error handling code in snd_hdspm_probe() ALSA: rme9652: Use common code in hdsp_get_iobox_version() ALSA: maestro3: Use common error handling code in two functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A tiny update: one patch corrects a Kconfig problem with the shift of the SAS SMP code to BSG and the other removes a vestige of user space target mode" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_sas: select BLK_DEV_BSGLIB scsi: Remove Scsi_Host.uspace_req_q
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Small collection of fixes that would be nice to have in -rc1. This contains: - NVMe pull request form Christoph, mostly with fixes for nvme-pci, host memory buffer in particular. - Error handling fixup for cgwb_create(), in case allocation of 'wb' fails. From Christophe Jaillet. - Ensure that trace_block_getrq() gets the 'dev' in an appropriate fashion, to avoid a potential NULL deref. From Greg Thelen. - Regression fix for dm-mq with blk-mq, fixing a problem with stacking IO schedulers. From me. - string.h fixup, fixing an issue with memcpy_and_pad(). This original change came in through an NVMe dependency, which is why I'm including it here. From Martin Wilck. - Fix potential int overflow in __blkdev_sectors_to_bio_pages(), from Mikulas. - MBR enable fix for sed-opal, from Scott" * 'for-linus' of git://git.kernel.dk/linux-block: block: directly insert blk-mq request from blk_insert_cloned_request() mm/backing-dev.c: fix an error handling path in 'cgwb_create()' string.h: un-fortify memcpy_and_pad nvme-pci: implement the HMB entry number and size limitations nvme-pci: propagate (some) errors from host memory buffer setup nvme-pci: use appropriate initial chunk size for HMB allocation nvme-pci: fix host memory buffer allocation fallback nvme: fix lightnvm check block: fix integer overflow in __blkdev_sectors_to_bio_pages() block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabled block: tolerate tracing of NULL bio -
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "A cleanup from Mauro that needed to wait for the media pull, plus a handful of other fixes that wandered in" * tag 'docs-4.14' of git://git.lwn.net/linux: kokr/memory-barriers.txt: Apply atomic_t.txt change kokr/doc: Update memory-barriers.txt for read-to-write dependencies docs-rst: don't require adjustbox anymore docs-rst: conf.py: only setup notice box colors if Sphinx < 1.6 docs-rst: conf.py: remove lscape from LaTeX preamble
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse updates from Miklos Szeredi: "This fixes a regression (spotted by the Sandstorm.io folks) in the pid namespace handling introduced in 4.12. There's also a fix for honoring sync/dsync flags for pwritev2()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: getattr cleanup fuse: honor iocb sync flags on write fuse: allow server to run in different pid_ns
-
