- 01 Oct, 2015 20 commits
-
-
Sudip Mukherjee authored
A rewrite of init_dma_pools() with proper error handling. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Mian Yousaf Kaukab authored
ID status change interrupt will not be handled in peripheral only configuration. So initialize op_state during gadget init. Signed-off-by:
Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Tested-by:
Robert Baldyga <r.baldyga@samsung.com> Tested-by:
Dinh Nguyen <dinguyen@opensource.altera.com> Tested-by:
John Youn <johnyoun@synopsys.com> Acked-by:
-
Gregory Herrero authored
Correctly update lx_state on gadget connection and disconnection. When usb cable is disconnected, lx_state must be updated to L3 as controller could be in power off state. When usb cable is connected, lx_state must be updated to L0 as controller is powered. Signed-off-by:
Gregory Herrero <gregory.herrero@intel.com> Signed-off-by:
-
Gregory Herrero authored
On a disconnect, dwc2 will kill all remaining urbs from qh list. urbs are given back to hcd with -ETIMEDOUT status. Some usb device driver, like mass storage, will unlink all urbs using usb_hcd_unlink_urb when receiving a negative status different from -ECONNRESET. The following flow will then happen: dwc2_hcd_disconnect() -> dwc2_kill_all_urbs() try to kill first pending urb. -> dwc2_host_complete(-ETIMEDOUT) -> usb_hcd_giveback_urb(-ETIMEDOUT) -> sg_complete() -> usb_unlink_urb() -> usb_put_dev(urb->dev) -> dwc2_kill_all_urbs() try to kill next pending urb. -> dwc2_host_complete(-ETIMEDOUT) -> usb_hcd_giveback_urb(-ETIMEDOUT) -> NULL pointer dereferencing because urb->dev has been freed for all urbs of this device. The root cause of this NULL pointer is to call call usb_unlink_urb() while we are killing all urbs. To avoid this return urb with -ECONNRESET status This issue usually happens while removing mass storage device during transfer. Signed-off-by:
-
Gregory Herrero authored
On first qh initialization, hsotg->frame_number is not corresponding to reality. So read it from host controller to get correct value. Signed-off-by:
-
Gregory Herrero authored
Print urb->iso_frame_desc.status after it has been updated using dwc2_hcd_urb_get_iso_desc_status(). Signed-off-by:
-
Gregory Herrero authored
Some high speed mass storage devices fail to enumerate with following error: Cannot enable port %i. Maybe the USB cable is bad? This happens only when the device is plugged while the controller is in hibernation state. After exiting hibernation, the controller detects the device as a low speed device and fail to enumerate it. Problem occurs only if HPRT0.PWR bit is programmed in a too short delay after exiting hibernation. Dumping hprt register in _dwc2_hcd_resume() directly after dwc2_exit_hibernation() shows that HPRT0.LNSTS (D+/D- level) becomes valid approximately 2ms after exiting hibernation. Since dwc2_exit_hibernation() is called from atomic context, move the delay out of this function. Delay value is experimental and not mentioned in Synopsys documentation. To be on the safe side 3ms delay is used. Signed-off-by:
-
Gregory Herrero authored
If an interrupt rises during hibernation process, dwc2 will assert interrupt line to interrupt controller. If interrupt is level sensitive, interrupt handler will be called in a loop because dwc2 will not be able to clear it while controller is hibernated. Thus, clear all controller interrupts before hibernation entry. Signed-off-by:
-
Gregory Herrero authored
Disable host interrupts before synchronising dwc2 irq. So that interrupts are not generated once controller is stopped. Signed-off-by:
-
Mian Yousaf Kaukab authored
GINTSTS.DisconnInt is host only interrupt and should be disable after dwc2_disable_host_interrupts is called. Signed-off-by:
-
Gregory Herrero authored
In case controller is asked to stop while devices are connected, disconnect all devices and clean up before stopping. Signed-off-by:
-
Gregory Herrero authored
Frame number is reset in hardware after exiting hibernation. Thus, reset frame_number and ensure qh are queued with correct sched_frame. Otherwise, qh->sched_frame may be too high compared to current frame number (which is 0). This can delay addition of qh in the list of transfers until frame number reaches qh->sched_frame. Signed-off-by:
-
Gregory Herrero authored
Port can be resumed in bus_resume callback. In this case, there is no need to drive resume a second time when hcd ask for it. Signed-off-by:
-
Gregory Herrero authored
If hibernation is supported, resume of devices will be handled in bus_resume callback. Signed-off-by:
-
Gregory Herrero authored
When a device is disconnected, lx_state must not be changed since the device may be disconnected whereas controller is still powered. Signed-off-by:
-
Gregory Herrero authored
During hcd initialization, hardware accessible flag and lx_state must be reset to the working state since controller is powered at this stage. Same logic applied for stop callback. Signed-off-by:
-
Gregory Herrero authored
Disable controller power and enter hibernation when usb bus is suspended. A phy driver is required to disable the power of the controller and detect remote-wakeup or disconnection since the controller will not be able to detect these in this state. Once the phy driver detects bus activity, it must call usb_hcd_resume_root_hub. Signed-off-by:
-
Gregory Herrero authored
lx_state must be used to reflect controller power state only and not bus state. Thus add a flag to track state during bus suspend. Signed-off-by:
-
Gregory Herrero authored
port resume sequence may be used in different places. Create a function to handle it. Make hprt0 read-modify-write atomic and clear HPRT0_SUSP for both writes as it is a "read, write-set, and self-clear (R_WS_SC)" bit. Since the lock is released between the writes, read hprt0 again. Since the phy clock is stopped in dwc2_port_suspend(), enable it here and remove the PCGCTL write from dwc2_hcd_hub_control() Signed-off-by:
-
Gregory Herrero authored
When entering hibernation hprt0 must be read using dwc2_read_hprt0(). Otherwise, any set hprt0 status bits will be cleared when restoring hprt0 on exit from hibernation. Signed-off-by:
-
- 28 Sep, 2015 5 commits
-
-
Felipe Balbi authored
We *know* our threads executes with our IRQs disabled. We really don't need to use the _irqsave() variant of spin_lock(). Signed-off-by: -
Felipe Balbi authored
Instead of limiting __dwc3_gadget_kick_transfer() to Xfer Complete, we can try to issue Update Transfer command from Xfer In Progress too. Signed-off-by: -
Felipe Balbi authored
If we get a Xfer Not Ready event with reason "Transfer Active" it means endpoint is still transferring data and we can use that to issue update transfer for this particular endpoint in case we have pending requests in our queue. Signed-off-by: -
Felipe Balbi authored
if by the time we get to XFER_COMPLETE we have pending requests to be processed, instead of waiting for a following XFER_NOT_READY, let's start the request right away and, maybe, save the time of a few NAKs due to lack of started transfers. Signed-off-by: -
Felipe Balbi authored
gadget methods should be called without spinlocks held. Reported-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 27 Sep, 2015 15 commits
-
-
Heikki Krogerus authored
Sharing the ACPI companion with dwc3 core so it has access to the properties defined for DWC3 in ACPI tables. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Heikki Krogerus authored
No functional affect on existing platforms, but the driver is now ready to extract the properties also from ACPI tables as well as from DT. Signed-off-by:
-
Heikki Krogerus authored
By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by:
-
Heikki Krogerus authored
of_usb_get_dr_mode will be converted into more generic usb_get_dr_mode function that will take struct device instead of struct device_node as its parameter. To make the conversion possible later, waiting for the platform device for dwc3 to be populated before calling of_usb_get_dr_mode. Signed-off-by:
-
Heikki Krogerus authored
By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by:
-
Peter Chen authored
- Replace all "transceiver" with "phy" - Replace one "OTG controller" with "phy" Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of tcm, ep->driver_data was used only for endpoint claiming so we can simplify code by reducing it. We also remove give_back_ep() function which is not needed after all - when error code is returned from bind() function, composite will release all endpoints anyway. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of dbgp, ep->driver_data was used only for endpoint claiming and marking endpoints as enabled, so we can simplify code by reducing it. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of u_serial ep->driver_data stores pointer to struct gs_port, which is referenced in many places in code. Code using ep->driver_data to mark endpoint as enabled/disabled has been removed. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of u_ether we only need to store in ep->driver_data pointer to struct eth_dev, as it's used in rx_complete() and tx_complete() callbacks. All other uses of ep->driver_data are now meaningless and can be safely removed. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of f_uvc, ep->driver_data was used only for endpoint claiming and marking endpoints as enabled, so we can simplify code by reducing it. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of f_uac2, ep->driver_data was used only for endpoint claiming and marking endpoints as enabled, so we can simplify code by reducing it. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of f_uac1, ep->driver_data was used only for endpoint claiming and marking endpoints as enabled, so we can simplify code by reducing it. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of f_subset, ep->driver_data was used only for endpoint claiming and marking endpoints as enabled, so we can simplify code by reducing it. Signed-off-by:
-
Robert Baldyga authored
Since ep->driver_data is not used for endpoint claiming, neither for enabled/disabled state storing, we can reduce number of places where we read or modify it's value, as now it has no particular meaning for function or framework logic. In case of f_sourcesink we only need to store in ep->driver_data pointer to struct f_sourcesink, as it's used in source_sink_complete() callback. All other uses of ep->driver_data are now meaningless and can be safely removed. Signed-off-by:
-
