- 15 Nov, 2022 2 commits
-
-
Vincent Knecht authored
Document msg2138 support by adding mstar,msg2138 compatible. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20221110171952.34207-3-vincent.knecht@mailoo.orgSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vincent Knecht authored
This will allow us to add other MStar touchscreen variants' support. No functional change. Signed-off-by:
-
- 07 Nov, 2022 4 commits
-
-
Christophe JAILLET authored
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Randy Dunlap authored
Fix a Kconfig warning for JOYSTICK_ADC by also selecting IIO_BUFFER. WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - JOYSTICK_ADC [=y] && INPUT [=y] && INPUT_JOYSTICK [=y] && IIO [=y] Fixes: 2c2b364f ("Input: joystick - add ADC attached joystick driver.") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221104201238.31628-1-rdunlap@infradead.orgSigned-off-by:
-
Job Noorman authored
This patch adds support for Himax hx83112b touchscreen devices. As there are no publicly available data sheets for these devices, the implementation is based on the driver of the downstream Android kernel used in the Fairphone 3. This patch is a complete rewrite, though, and the code bears no resemblence to the original implementation. The driver has been tested on the aforementioned phone. Signed-off-by:
Job Noorman <job@noorman.info> Reviewed-by:
Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.infoSigned-off-by:
-
Job Noorman authored
This patch adds device tree bindings for Himax 83112b touchscreen devices. Signed-off-by:
-
- 03 Nov, 2022 2 commits
-
-
Andre Przywara authored
The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC) compatible to the version in other SoCs. The manual doesn't mention the ratio of the input voltage that is used, but comparing actual measurements with the values in the register suggests that it is 3/4 of Vref. Add an F1C100s compatible string to the list, and pair it with the A83T fallback. Since the A64 is the same, combined both using an enum. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
-
Siarhei Volkau authored
Some Pin/GPIO controllers can't get current GPIO status when interrupt mode is set. Specifically Ingenic's JZ4755 always returns status at the moment of interrupt. The patch tries to fix that by forcibly setting pin mode to GPIO input prior to reading actual row status. enable_row_irqs seems to set interrupt mode back as it should be. Signed-off-by:
Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221102165747.1528988-1-lis8215@gmail.comSigned-off-by:
-
- 01 Nov, 2022 2 commits
-
-
Alistair Francis authored
This is the basic driver for the Cypress TrueTouch Gen5 touchscreen controllers. This driver supports only the I2C bus but it uses regmap so SPI support could be added later. The touchscreen can retrieve some defined zone that are handled as buttons (according to the hardware). That is why it handles button and multitouch events. Reviewed-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Mylène Josserand <mylene.josserand@bootlin.com> Signed-off-by:
Alistair Francis <alistair@alistair23.me> Tested-by: Andreas Kemnade <andreas@kemnade.info> # Kobo Clara HD Tested-by:
Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20221026114908.191472-2-alistair@alistair23.meSigned-off-by:
-
Alistair Francis authored
Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings documentation. It can use I2C or SPI bus. This touchscreen can handle some defined zone that are designed and sent as button. To be able to customize the keycode sent, the "linux,code" property in a "button" sub-node can be used. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
-
- 30 Oct, 2022 4 commits
-
-
Chris Morgan authored
Add support for the Hynitron cst3xx controller found on devices such as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver was built from sources provided by Hynitron to Anbernic (possibly via Rockchip as an intermediary) and marked as GPLv2 in the code. This driver was written strictly for the cst3xx series, but in most places was left somewhat generic so support could be easily added to other devices in the future. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20221028202636.14341-4-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Add documentation for the Hynitron cstxxx touchscreen bindings. Hynitron makes a series of touchscreen controllers, however for now this is expected to only be compatible with the cst3xx series, specifically the CST340, CST348, and CST356. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221028202636.14341-3-macroalpha82@gmail.comSigned-off-by:
-
Chris Morgan authored
Hynitron is a company based in Shanghai that makes controller ICs for touchscreens. http://www.hynitron.com/Signed-off-by:
-
Neil Armstrong authored
Convert input/qcom,pm8xxx-pwrkey.txt to YAML, and take in account that the PM8921 pwrkey compatible is used as fallback for the PM8018 pwrkey. Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20220928-mdm9615-dt-schema-fixes-v4-6-dac2dfaac703@linaro.orgSigned-off-by:
-
- 28 Oct, 2022 2 commits
-
-
Dmitry Torokhov authored
The driver is using of_property_read_u32() and therefore needs to include of.h header. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Dmitry Torokhov authored
The board file for Wolfson Cragganmore 6410 uses various KEY_* defines, but does not include the relevant header directly and instead relies on other headers to include it indirectly. With the upcoming cleanup of matrix_keypad.h this indirection is now broken and we should include the relevant header directly. Reported-by:
-
- 24 Oct, 2022 13 commits
-
-
Dmitry Torokhov authored
The driver is using of_device_id/of_match_ptr() and therefore needs to include of.h header. We used to get this definition indirectly via inclusion of matrix_keypad.h from twl.h, but we are cleaning up matrix_keypad.h from unnecessary includes. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220927154611.3330871-3-dmitry.torokhov@gmail.comSigned-off-by:
-
Colin Ian King authored
The variable loops is being incremented but is never referenced, it is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221020181642.24417-1-colin.i.king@gmail.comSigned-off-by:
-
Jeff LaBundy authored
IQS7222A revisions 1.13 and later widen the gesture multiplier from x4 ms to x16 ms. Add a means to scale the gesture timings specified in the device tree based on the revision of the device. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
IQS7222A revisions 1.13 and later widen the gesture multiplier from x4 ms to x16 ms; update the binding accordingly. As part of this change, refresh the corresponding properties in the example as well. Fixes: 44dc42d2 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
Select variants of silicon do not define a default slider size, in which case the size must be specified in the device tree. If it is not, the axis's maximum value is reported as 65535 due to unsigned integer overflow. To solve this problem, move the existing zero-check outside of the conditional block that checks whether the property is present. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
The minimum slider size enforced by the driver is 1 or 16 for the IQS7222C or IQS7222A, respectively. Fixes: 44dc42d2 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
Nonzero return values of several calls to fwnode_property_read_u32() are silently ignored, leaving no way to know the properties were not applied in the event of an error. Solve this problem by evaluating fwnode_property_read_u32()'s return value, and reporting an error for any nonzero return value not equal to -EINVAL which indicates the property was absent altogether. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
Following a recent refactor of the driver to properly drop unused device nodes, the 'linux,code' property is now optional. This can be useful for applications that define GPIO-mapped events that do not correspond to any keycode. Fixes: 44dc42d2 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C") Signed-off-by:
-
Jeff LaBundy authored
Each call to device/fwnode_get_named_child_node() must be matched with a call to fwnode_handle_put() once the corresponding node is no longer in use. This ensures a reference count remains balanced in the case of dynamic device tree support. Currently, the driver never calls fwnode_handle_put(). Solve this problem by moving the node handling from iqs7222_parse_props() to the new iqs7222_parse_reg_grp(), leaving the former to do nothing but parse properties. The latter then manages the reference count in a single location and consistent fashion. This change drastically simplifies iqs7222_parse_all(), which can then call iqs7222_parse_reg_grp() on every register group without having to treat each register group differently. For nested event nodes, common parsing code has been factored out to the new iqs7222_parse_event() so as to allow the event node to be dropped from as few locations as possible. As part of this refactor, the 'linux,code' property has been made optional. This enables applications that define an event with the sole purpose of enabling a GPIO. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
Dmitry Torokhov authored
Stop hard-coding interrupt trigger, instead rely on the platform code to do the right thing, according to DT or ACPI data. Link: https://lore.kernel.org/r/20220920042608.1865560-4-dmitry.torokhov@gmail.comSigned-off-by:
-
Dmitry Torokhov authored
This updates the driver to gpiod API, and removes yet another use of of_get_named_gpio(). Link: https://lore.kernel.org/r/20220920042608.1865560-3-dmitry.torokhov@gmail.comSigned-off-by:
-
Dmitry Torokhov authored
The driver is using level triggered interrupt (low) which is backed by an active low GPIO that can be used to wake the controller by driving it low. Let's annotate it properly in the example. Acked-by:
-
Dmitry Torokhov authored
This patch fixes interrupt trigger (should be level low as that is what the driver is always using), the GPIO that is the interrupt source that is also used to wake up chip by driving the line low. The proper polarity is be needed for converting the driver to gpiod API. Acked-by:
Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20220920042608.1865560-1-dmitry.torokhov@gmail.comSigned-off-by:
-
- 17 Oct, 2022 1 commit
-
-
Dmitry Torokhov authored
Merge with mainline to bring in the latest changes to twl4030 driver.
-
- 16 Oct, 2022 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1 -
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents
-
Tetsuo Handa authored
This reverts commit 78e5a339 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a339 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by:
Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719Signed-off-by:Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Commit f110e5a2 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a2 ("kbuild: refactor single builds of *.ko") Reported-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
David Sterba <dsterba@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
-
