In tls_sw_sendmsg() and tls_sw_sendpage(), the variable 'ret' has
been set to return value of tls_complete_pending_work(). This allows
return of proper error code if tls_complete_pending_work() fails.

Fixes: 3c4d7559 ("tls: kernel TLS support")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
net: aquantia: implement WOL and EEE support

This is v3 of WOL/EEE functionality patch for atlantic driver.

In this patchset Yana Esina and Nikita Danilov implemented:

- Upload function to interact with FW memory
- Definitions and structures necessary for the correct operation of Wake ON Lan
- The functionality Wake On Lan via ethtool (Magic packet is supported)
- The functionality for Energy-Efficient Ethernet configuration via ethtool

Version 3:
- use ETH_ALEN instead of raw number

Version 2 has the following fixes:
- patchset reorganized to extract renaming and whitespace fixes into separate
  patches
- some of magic numbers replaced with defines
- reverse christmas tree applied
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed extra characters from the names of structures to unify prefixes
used through the driver code (we normally use hw_atl for hw specifics).
HW_ATL_B0_ and HW_ATL_A0_ are the same and useless copies.
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed extra spaces, corrected alignment.
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support of Energy-Efficient Ethernet to aQuantia NIC's via ethtool
(according to the IEEE 802.3az specifications)
Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add WOL support. Currently only magic packet
(ethtool -s <ethX> wol g) feature is implemented.

Remove hw_set_power and move that to FW_OPS set_power:
because WOL configuration behaves differently on 1x and 2x
firmwares
Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added definitions and structures needed to support WOL.
Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the upload function, which worked incorrectly with
some chips.
Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Intiyaz Basha says:

====================
liquidio: Removed droq lock from Rx path

Series of patches for removing droq lock from Rx Path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

With the changes in patch 1 and 2, droq lock is not required.
So removing droq lock.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Removed oom task unconditional rescheduling every 250ms and created per
queue oom work queue for refilling buffers.

The oom task refills only if the available descriptors is fallen to 64.
There will be no packets coming in after hitting this level. So NAPI will
not run until oom task refills the buffers.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Control packets are processed in tasklet when interface is down and in
NAPI when interface is up. So tasklet can be disabled when interface up
and re-enabled when interface is down.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just
remove the condition check before debugfs_remove_recursive.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

debugfs_remove_recursive has taken the IS_ERR_OR_NULL into account. Just
remove the unnecessary condition check.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "pause" variable is only initialized on BCM5301x.

Fixes: 5e004460 ("net: dsa: b53: Add helper to set link parameters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cl->leaf.q is slightly more readable than cl->un.leaf.q.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We no longer take any spinlock on RX path for ingress qdisc,
so this lockdep annotation is no longer needed.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change flower in_hw_count type to fixed-size u32 and dump it as
TCA_FLOWER_IN_HW_COUNT. This change is necessary to properly test shared
blocks and re-offload functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Miller says:

====================
SKB list handling cleanups

This is a preparatory patch series which cleans up various forms of
sloppy SKB list handling, and makes certain semantics explicit.

We are trying to eliminate code that directly accesses the SKB
list and SKB queue head next/prev members in any way.  It is
impossible to convert SKB queue head over the struct list_head
while such code exists.

This patch series does not eliminate all such code, only the simplest
cases.  A latter series will tackle the complicated ones.

A helper is added to make the "skb->next == NULL means not on a list"
rule explicit, and another is added to combine this with list_del().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate the assumption that SKBs and SKB list heads can
be cast to eachother in SKB list handling code.
Signed-off-by: David S. Miller <davem@davemloft.net>

Eliminate code which assumes that SKBs and skb_queue_head objects
can be cast to eachother during list processing.
Signed-off-by: David S. Miller <davem@davemloft.net>

It documents what is happening, and eliminates the spurious list
pointer poisoning.

In the long term, in order to get proper list head debugging, we
might want to use the list poison value as the indicator that
an SKB is a singleton and not on a list.
Signed-off-by: David S. Miller <davem@davemloft.net>

An SKB is not on a list if skb->next is NULL.

Codify this convention into a helper function and use it
where we are dequeueing an SKB and need to mark it as such.
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct SKB list pointer accesses.

In these situations, we absolutely know that the SKB queue in question
is non-empty.
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct list head pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct list pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct skb_queue_head pointer accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use skb_queue_walk() instead.

Adjust inner loop test to utilize and skb_queue_is_first().
Unfortunately we have to keep pkt_cnt around because it is
used by a latter loop in this function.
Signed-off-by: David S. Miller <davem@davemloft.net>

Use __skb_peek() instead.
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper, __skb_peek(), and use it in ppp_mp_reconstruct().
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of direct SKB list accesses.
Signed-off-by: David S. Miller <davem@davemloft.net>

By hand copies of SKB list handlers do not belong in individual packet
schedulers.
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead, adjust __qdisc_enqueue_tail() such that HTB can use it
instead.

The only other caller of __qdisc_enqueue_tail() is
qdisc_enqueue_tail() so we can move the backlog and return value
handling (which HTB doesn't need/want) to the latter.
Signed-off-by: David S. Miller <davem@davemloft.net>

After the conversion to fib6_info, rt6i_prefsrc has a single user that
reads the value and otherwise it is only set. The one reader can be
converted to use rt->from so rt6i_prefsrc can be removed, reducing
rt6_info by another 20 bytes.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent commit updated vlan_cmd.dropnovlan_fm but failed to remove
the older assignment.  Fix this by removing the former redundant
assignment.

Detected by CoverityScan, CID#1473290 ("Unused value")

Fixes: a89cdd8e ("cxgb4: impose mandatory VLAN usage when non-zero TAG ID")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

if failover_register failed, 'err' code should be set correctly

Fixes: cfc80d9a ("net: Introduce net_failover driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GMAC >= 4 also supports CBS. Lets enable the TC Ops for these versions.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the new locking rule, we have to take tcf_lock for both
->init() and ->dump(), as RTNL will be removed.

Use tcf spinlock to protect private nat action data from concurrent
modification during dump. (nat init already uses tcf spinlock when changing
action state)
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>