- 05 Mar, 2020 14 commits
-
-
Arthur Kiyanovski authored
[ Upstream commit 2a6e5fa2 ] >From the documentation of round_jiffies(): "Rounds a time delta in the future (in jiffies) up or down to (approximately) full seconds. This is useful for timers for which the exact time they fire does not matter too much, as long as they fire approximately every X seconds. By rounding these timers to whole seconds, all such timers will fire at the same time, rather than at various times spread out. The goal of this is to have the CPU wake up less, which saves power." There are 2 parts to this patch: ================================ Part 1: ------- In our case we need timer_service to be called approximately every X=1 seconds, and the exact time does not matter, so using round_jiffies() is the right way to go. Therefore we add round_jiffies() to the mod_timer() in ena_timer_service(). Part 2: ------- round_jiffies() is used in check_for_missing_keep_alive() when getting the jiffies of the expiration of the keep_alive timeout. Here it is actually a mistake to use round_jiffies() because we want the exact time when keep_alive should expire and not an approximate rounded time, which can cause early, false positive, timeouts. Therefore we remove round_jiffies() in the calculation of keep_alive_expired() in check_for_missing_keep_alive(). Fixes: 82ef30f1 ("net: ena: add hardware hints capability to the driver") Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Arthur Kiyanovski authored
[ Upstream commit 91a65b7d ] When ethtool -X is called without an hkey, ena_com_fill_hash_function() is called with key=NULL, which is passed to memcpy causing a crash. This commit fixes this issue by checking key is not NULL. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 6f4ecbe2 ] If only Tegra194 support is enabled, the tegra30_fuse_read() and tegra30_fuse_init() function are not declared and cause a build failure. Add Tegra194 to the preprocessor guard to make sure these functions are available for Tegra194-only builds as well. Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Kuninori Morimoto authored
[ Upstream commit f2466777 ] frame-inversion is "flag" not "uint32". This patch fixup it. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 00516d13 ] We have been using the fact that the QMI and DIAG functions usually are the only ones with class/subclass/protocol being ff/ff/ff on Quectel modems. This has allowed us to match the QMI function without knowing the exact interface number, which can vary depending on firmware configuration. The ability to silently reject the DIAG function, which is usually handled by the option driver, is important for this method to work. This is done based on the knowledge that it has exactly 2 bulk endpoints. QMI function control interfaces will have either 3 or 1 endpoint. This rule is universal so the quirk condition can be removed. The fixed layouts known from the Gobi1k and Gobi2k modems have been gradually replaced by more dynamic layouts, and many vendors now use configurable layouts without changing device IDs. Renaming the class/subclass/protocol matching macro makes it more obvious that this is now not Quectel specific anymore. Cc: Kristian Evensen <kristian.evensen@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 88bf5460 ] Commit f25e1392 removed the support for the pre-production variant of the Dell DW5821e to avoid probing another USB interface unnecessarily. However, the pre-production samples are found in the wild, and this lack of support is causing problems for users of such samples. It is therefore necessary to support both variants. Matching on both interfaces 0 and 1 is not expected to cause any problem with either variant, as only the QMI function will be probed successfully on either. Interface 1 will be rejected based on the HID class for the production variant: T: Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev=03.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option And interface 0 will be rejected based on too few endpoints for the pre-production variant: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 2 P: Vendor=413c ProdID=81d7 Rev= 3.18 S: Manufacturer=DELL S: Product=DW5821e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Fixes: f25e1392 ("qmi_wwan: fix interface number for DW5821e production firmware") Link: https://whrl.pl/Rf0vNkReported-by:
Lars Melin <larsm17@gmail.com> Cc: Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Harald Freudenberger authored
[ Upstream commit fcd98d40 ] The internal statistic counters for the total number of requests processed per card and per queue used integers. So they do wrap after a rather huge amount of crypto requests processed. This patch introduces uint64 counters which should hold much longer but still may wrap. The sysfs attributes request_count for card and queue also used only %ld and now display the counter value with %llu. This is not a security relevant fix. The int overflow which happened is not in any way exploitable as a security breach. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Sergey Matyukevich authored
[ Upstream commit bfb7bac3 ] When preparing ethtool drvinfo, check if wiphy driver is defined before dereferencing it. Driver may not exist, e.g. if wiphy is attached to a virtual platform device. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200203105644.28875-1-sergey.matyukevich.os@quantenna.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit a04564c9 ] We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by:
-
Jeff Moyer authored
[ Upstream commit 96222d53 ] fstests generic/471 reports a failure when run with MOUNT_OPTIONS="-o dax". The reason is that the initial pwrite to an empty file with the RWF_NOWAIT flag set does not return -EAGAIN. It turns out that dax_iomap_rw doesn't pass that flag through to iomap_apply. With this patch applied, generic/471 passes for me. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/x49r1z86e1d.fsf@segfault.boston.devel.redhat.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Sean Paul authored
[ Upstream commit db735fc4 ] Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536] [ 12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318 [ 12.102655] Modules linked in: joydev [ 12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2 [ 12.112450] Hardware name: Google Cheza (rev3+) (DT) [ 12.117566] pstate: 60400009 (nZCv daif +PAN -UAO) [ 12.122506] pc : debug_dma_map_sg+0x1dc/0x318 [ 12.126995] lr : debug_dma_map_sg+0x1dc/0x318 [ 12.131487] sp : ffffff800cc3ba80 [ 12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000 [ 12.140395] x27: 0000000000000004 x26: 0000000000000004 [ 12.145868] x25: ffffff8008e55b18 x24: 0000000000000000 [ 12.151337] x23: 00000000ffffffff x22: ffffff800921c000 [ 12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090 [ 12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000 [ 12.167749] x17: 0000000000000000 x16: 0000000000000000 [ 12.173218] x15: 0000000000000000 x14: 0720072007200720 [ 12.178689] x13: 0720072007200720 x12: 0720072007200720 [ 12.184161] x11: 0720072007200720 x10: 0720072007200720 [ 12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000 [ 12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000 [ 12.200585] x5 : 0000000000000000 x4 : ffffff8008134734 [ 12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240 [ 12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400 [ 12.217006] Call trace: [ 12.219535] debug_dma_map_sg+0x1dc/0x318 [ 12.223671] get_pages+0x19c/0x20c [ 12.227177] msm_gem_fault+0x64/0xfc [ 12.230874] __do_fault+0x3c/0x140 [ 12.234383] __handle_mm_fault+0x70c/0xdb8 [ 12.238603] handle_mm_fault+0xac/0xc4 [ 12.242473] do_page_fault+0x1bc/0x3d4 [ 12.246342] do_translation_fault+0x54/0x88 [ 12.250652] do_mem_abort+0x60/0xf0 [ 12.254250] el0_da+0x20/0x24 [ 12.257317] irq event stamp: 67260 [ 12.260828] hardirqs last enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608 [ 12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178 [ 12.278820] softirqs last enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520 [ 12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100 [ 12.295742] ---[ end trace e63cfc40c313ffab ]--- The root of the problem is that the default segment size for sgt is (UINT_MAX & PAGE_MASK), and the default segment size for device dma is 64K. As such, if you compare the 2, you would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate the larger sg segments, it's just not initializing its max segment properly. This patch initializes the max segment size for the mdss device, which gets rid of that pesky warning. Reported-by:
Stephen Boyd <swboyd@chromium.org> Tested-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeidSigned-off-by:
-
Corey Minyard authored
[ Upstream commit 6b8526d3 ] In error cases a NULL can be passed to memcpy. The length will always be zero, so it doesn't really matter, but go ahead and check for NULL, anyway, to be more precise and avoid static analysis errors. Reported-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Johannes Berg authored
commit 8188a18e upstream We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by:
Ajay Kaher <akaher@vmware.com> Signed-off-by:
-
Joe Perches authored
[ Upstream commit 20faba84 ] Arguments are supposed to be ordered high then low. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/ab5deb4fc3cd604cb620054770b7d00016d736bc.1562734889.git.joe@perches.comSigned-off-by:
-
- 28 Feb, 2020 26 commits
-
-
Greg Kroah-Hartman authored
-
Greg Kroah-Hartman authored
This reverts commit 15341b1d which is commit 1b710b1b upstream. Lech writes: After upgrading kernel on our boards from v4.19.105 to v4.19.106 we found out that syslog fails to read the messages after ones read initially after opening /proc/kmsg just after booting. I also found out, that output of 'dmesg --follow' also doesn't react on new printks appearing for whatever reason - to read new messages, reopening /proc/kmsg or /dev/kmsg was needed. I bisected this down to commit 15341b1d ("char/random: silence a lockdep splat with printk()"), and reverting it on top of v4.19.106 restored correct behaviour. While people dig to find out how such an odd change causes a lockup, let's just revert this for now as it's not all that big of a deal for 4.19.y. Reported-by:
Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Qian Cai <cai@lca.pw> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Sasha Levin <sashal@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by:
-
Nathan Chancellor authored
commit 38032473 upstream. Clang warns: In file included from ../arch/s390/purgatory/purgatory.c:10: In file included from ../include/linux/kexec.h:18: In file included from ../include/linux/crash_core.h:6: In file included from ../include/linux/elfcore.h:5: In file included from ../include/linux/user.h:1: In file included from ../arch/s390/include/asm/user.h:11: ../arch/s390/include/asm/page.h:45:6: warning: converting the result of '<<' to a boolean always evaluates to false [-Wtautological-constant-compare] if (PAGE_DEFAULT_KEY) ^ ../arch/s390/include/asm/page.h:23:44: note: expanded from macro 'PAGE_DEFAULT_KEY' #define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4) ^ 1 warning generated. Explicitly compare this against zero to silence the warning as it is intended to be used in a boolean context. Fixes: de3fa841 ("s390/mm: fix compile for PAGE_DEFAULT_KEY != 0") Link: https://github.com/ClangBuiltLinux/linux/issues/860 Link: https://lkml.kernel.org/r/20200214064207.10381-1-natechancellor@gmail.comAcked-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 8645e56a upstream. xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811d ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Prabhakar Kushwaha authored
commit 10a663a1 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
David Howells authored
commit 963485d4 upstream. rxrpc_rcu_destroy_call(), which is called as an RCU callback to clean up a put call, calls rxrpc_put_connection() which, deep in its bowels, takes a number of spinlocks in a non-BH-safe way, including rxrpc_conn_id_lock and local->client_conns_lock. RCU callbacks, however, are normally called from softirq context, which can cause lockdep to notice the locking inconsistency. To get lockdep to detect this, it's necessary to have the connection cleaned up on the put at the end of the last of its calls, though normally the clean up is deferred. This can be induced, however, by starting a call on an AF_RXRPC socket and then closing the socket without reading the reply. Fix this by having rxrpc_rcu_destroy_call() punt the destruction to a workqueue if in softirq-mode and defer the destruction to process context. Note that another way to fix this could be to add a bunch of bh-disable annotations to the spinlocks concerned - and there might be more than just those two - but that means spending more time with BHs disabled. Note also that some of these places were covered by bh-disable spinlocks belonging to the rxrpc_transport object, but these got removed without the _bh annotation being retained on the next lock in. Fixes: 999b69f8 ("rxrpc: Kill the client connection bundle concept") Reported-by: syzbot+d82f3ac8d87e7ccbb2c9@syzkaller.appspotmail.com Reported-by: syzbot+3f1fd6b8cbf8702d134e@syzkaller.appspotmail.com Signed-off-by:
David Howells <dhowells@redhat.com> cc: Hillf Danton <hdanton@sina.com> Signed-off-by:
-
Cong Wang authored
commit 8d0015a7 upstream. The user-specified hashtable size is unbound, this could easily lead to an OOM or a hung task as we hold the global mutex while allocating and initializing the new hashtable. Add a max value to cap both cfg->size and cfg->max, as suggested by Florian. Reported-and-tested-by: syzbot+adf6c6c2be1c3a718121@syzkaller.appspotmail.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Takashi Iwai authored
commit dc749779 upstream. snd_seq_check_queue() passes the current tick and time of the given queue as a pointer to snd_seq_prioq_cell_out(), but those might be updated concurrently by the seq timer update. Fix it by retrieving the current tick and time via the proper helper functions at first, and pass those values to snd_seq_prioq_cell_out() later in the loops. snd_seq_timer_get_cur_time() takes a new argument and adjusts with the current system time only when it's requested so; this update isn't needed for snd_seq_check_queue(), as it's called either from the interrupt handler or right after queuing. Also, snd_seq_timer_get_cur_tick() is changed to read the value in the spinlock for the concurrency, too. Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit bb51e669 upstream. The queue flags are represented in bit fields and the concurrent access may result in unexpected results. Although the current code should be mostly OK as it's only reading a field while writing other fields as KCSAN reported, it's safer to cover both with a proper spinlock protection. This patch fixes the possible concurrent read by protecting with q->owner_lock. Also the queue owner field is protected as well since it's the field to be protected by the lock itself. Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
commit dfa9a5ef upstream. The rawmidi state flags (opened, append, active_sensing) are stored in bit fields that can be potentially racy when concurrently accessed without any locks. Although the current code should be fine, there is also no any real benefit by keeping the bitfields for this kind of short number of members. This patch changes those bit fields flags to the simple bool fields. There should be no size increase of the snd_rawmidi_substream by this change. Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.deSigned-off-by:
-
Johannes Krude authored
commit e20d3a05 upstream. This if guards whether user-space wants a copy of the offload-jited bytecode and whether this bytecode exists. By erroneously doing a bitwise AND instead of a logical AND on user- and kernel-space buffer-size can lead to no data being copied to user-space especially when user-space size is a power of two and bigger then the kernel-space buffer. Fixes: fcfb126d ("bpf: add new jited info fields in bpf_dev_offload and bpf_prog_info") Signed-off-by:
Johannes Krude <johannes@krude.de> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20200212193227.GA3769@phlox.h.transitiv.netSigned-off-by:
-
Thomas Gleixner authored
commit cba6437a upstream. Qian Cai reported that the WARN_ON() in the x86/msi affinity setting code, which catches cases where the affinity setting is not done on the CPU which is the current target of the interrupt, triggers during CPU hotplug stress testing. It turns out that the warning which was added with the commit addressing the MSI affinity race unearthed yet another long standing bug. If user space writes a bogus affinity mask, i.e. it contains no online CPUs, then it calls irq_select_affinity_usr(). This was introduced for ALPHA in eee45269 ("[PATCH] Alpha: convert to generic irq framework (generic part)") and subsequently made available for all architectures in 18404756 ("genirq: Expose default irq affinity mask (take 3)") which introduced the circumvention of the affinity setting restrictions for interrupt which cannot be moved in process context. The whole exercise is bogus in various aspects: 1) If the interrupt is already started up then there is absolutely no point to honour a bogus interrupt affinity setting from user space. The interrupt is already assigned to an online CPU and it does not make any sense to reassign it to some other randomly chosen online CPU. 2) If the interupt is not yet started up then there is no point either. A subsequent startup of the interrupt will invoke irq_setup_affinity() anyway which will chose a valid target CPU. So the only correct solution is to just return -EINVAL in case user space wrote an affinity mask which does not contain any online CPUs, except for ALPHA which has it's own magic sauce for this. Fixes: 18404756 ("genirq: Expose default irq affinity mask (take 3)") Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Joerg Roedel authored
commit e7598fac upstream. The intel_svm_is_pasid_valid() needs to be marked inline, otherwise it causes the compile warning below: CC [M] drivers/dma/idxd/cdev.o In file included from drivers/dma/idxd/cdev.c:9:0: ./include/linux/intel-svm.h:125:12: warning: ‘intel_svm_is_pasid_valid’ defined but not used [-Wunused-function] static int intel_svm_is_pasid_valid(struct device *dev, int pasid) ^~~~~~~~~~~~~~~~~~~~~~~~ Reported-by:
Borislav Petkov <bp@alien8.de> Fixes: 15060aba ('iommu/vt-d: Helper function to query if a pasid has any active users') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Aditya Pakki authored
commit 2c2a7552 upstream. In crypt_scatterlist, if the crypt_stat argument is not set up correctly, the kernel crashes. Instead, by returning an error code upstream, the error is handled safely. The issue is detected via a static analysis tool written by us. Fixes: 237fead6 (ecryptfs: fs/Makefile and fs/Kconfig) Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Tyler Hicks <code@tyhicks.com> Signed-off-by:
-
Dan Carpenter authored
commit b7db5810 upstream. When we call kobject_put() and it's the last reference to the kobject then it calls gb_audio_module_release() and frees module. We dereference "module" on the next line which is a use after free. Fixes: c77f85bb ("greybus: audio: Fix incorrect counting of 'ida'") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
Vaibhav Agarwal <vaibhav.sr@gmail.com> Link: https://lore.kernel.org/r/20200205123217.jreendkyxulqsool@kili.mountainSigned-off-by:
-
Colin Ian King authored
commit 8ae9a588 upstream. Currently the rtw_sprintf prints the contents of thread_name onto thread_name and this can lead to a potential copy of a string over itself. Avoid this by printing the literal string RTWHALXT instread of the contents of thread_name. Addresses-Coverity: ("copy of overlapping memory") Fixes: 554c0a3a ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200126220549.9849-1-colin.king@canonical.comSigned-off-by:
-
Minas Harutyunyan authored
commit 860ef6cd upstream. Moved ISOC request length checking from dwc2_hsotg_start_req() function to dwc2_hsotg_ep_queue(). Fixes: 4fca54aa ("usb: gadget: s3c-hsotg: add multi count support") Signed-off-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Jack Pham authored
commit c724417b upstream. SuperSpeedPlus peripherals must report their bMaxPower of the configuration descriptor in units of 8mA as per the USB 3.2 specification. The current switch statement in encode_bMaxPower() only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so the latter falls back to USB 2.0 encoding which uses 2mA units. Replace the switch with a simple if/else. Fixes: eae5820b ("usb: gadget: composite: Write SuperSpeedPlus config descriptors") Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Bart Van Assche authored
commit 807b9515 upstream. Since commit e9d3009c introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: e9d3009c ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
commit 76261ada upstream. Since commit 04060db4 introduces soft lockups when toggling network interfaces, revert it. Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
-
Greg Kroah-Hartman authored
This reverts commit af8eca60 which is commit 02939cd1 upstream. Andreas writes: This patch breaks our imx6 board with the attached trace. Reverting the patch makes it boot again. Reported-by:
Andreas Tobler <andreas.tobler@onway.ch> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Robin Gong <yibin.gong@nxp.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Filipe Manana authored
commit e75fd33b upstream. In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress. All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits: ff612ba7 ("btrfs: fix panic during relocation after ENOSPC before writeback happens") 28aeeac1 ("Btrfs: fix panic when starting bg cache writeout after IO error") don't work when there are multiple ordered extents in the range. Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error. Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Josef Bacik authored
commit 1e903151 upstream. btrfs_assert_delayed_root_empty() will check if the delayed root is completely empty, but this is a filesystem-wide check. On cleanup we may have allowed other transactions to begin, for whatever reason, and thus the delayed root is not empty. So remove this check from cleanup_one_transation(). This however can stay in btrfs_cleanup_transaction(), because it checks only after all of the transactions have been properly cleaned up, and thus is valid. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
-
Josef Bacik authored
commit 315bf8ef upstream. While running my error injection script I hit a panic when we tried to clean up the fs_root when freeing the fs_root. This is because fs_info->fs_root == PTR_ERR(-EIO), which isn't great. Fix this by setting fs_info->fs_root = NULL; if we fail to read the root. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Josef Bacik authored
commit b778cf96 upstream. I hit the following warning while running my error injection stress testing: WARNING: CPU: 3 PID: 1453 at fs/btrfs/space-info.h:108 btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] RIP: 0010:btrfs_free_reserved_data_space_noquota+0xfd/0x160 [btrfs] Call Trace: btrfs_free_reserved_data_space+0x4f/0x70 [btrfs] __btrfs_prealloc_file_range+0x378/0x470 [btrfs] elfcorehdr_read+0x40/0x40 ? elfcorehdr_read+0x40/0x40 ? btrfs_commit_transaction+0xca/0xa50 [btrfs] ? dput+0xb4/0x2a0 ? btrfs_log_dentry_safe+0x55/0x70 [btrfs] ? btrfs_sync_file+0x30e/0x420 [btrfs] ? do_fsync+0x38/0x70 ? __x64_sys_fdatasync+0x13/0x20 ? do_syscall_64+0x5b/0x1b0 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens if we fail to insert our reserved file extent. At this point we've already converted our reservation from ->bytes_may_use to ->bytes_reserved. However once we break we will attempt to free everything from [cur_offset, end] from ->bytes_may_use, but our extent reservation will overlap part of this. Fix this problem by adding ins.offset (our extent allocation size) to cur_offset so we remove the actual remaining part from ->bytes_may_use. I validated this fix using my inject-error.py script python inject-error.py -o should_fail_bio -t cache_save_setup -t \ __btrfs_prealloc_file_range \ -t insert_reserved_file_extent.constprop.0 \ -r "-5" ./run-fsstress.sh where run-fsstress.sh simply mounts and runs fsstress on a disk. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
-
Miaohe Lin authored
commit 23520b2d upstream. When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
