- 13 Jan, 2019 31 commits
-
-
Kangjie Lu authored
[ Upstream commit d134e486 ] When netxen_rom_fast_read() fails, "bios" is left uninitialized and may contain random value, thus should not be used. The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO". Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit f7db2beb ] Currently variable data0 is not being initialized so a garbage value is being passed to vxge_hw_vpath_fw_api and this value is being written to the rts_access_steer_data0 register. There are other occurrances where data0 is being initialized to zero (e.g. in function vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0 is initialized likewise to 0. Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable") Fixes: 8424e00d ("vxge: serialize access to steering control register") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Jason Martinsen authored
[ Upstream commit 15515aaa ] Current state for the lan78xx driver does not allow for changing the MAC address of the interface, without either removing the module (if you compiled it that way) or rebooting the machine. If you attempt to change the MAC address, ifconfig will show the new address, however, the system/interface will not respond to any traffic using that configuration. A few short-term options to work around this are to unload the module and reload it with the new MAC address, change the interface to "promisc", or reboot with the correct configuration to change the MAC. This patch enables the ability to change the MAC address via fairly normal means... ifdown <interface> modify entry in /etc/network/interfaces OR a similar method ifup <interface> Then test via any network communication, such as ICMP requests to gateway. My only test platform for this patch has been a raspberry pi model 3b+. Signed-off-by:
Jason Martinsen <jasonmartinsen@msn.com> ----- Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit cf76785d ] Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that we don't have races between the (asynchronous) socket setup code and tasks in xprt_connect(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 726ae5c9 ] In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug. Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 7e74a19c ] The ntuple-filters features is forced on by chip. But it shows "ntuple-filters: off [fixed]" when use ethtool. This patch make it correct with "ntuple-filters: on [fixed]". Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit a57275d3 ] There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems. So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it. When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit c82bd077 ] 1.In "hns_nic_init_irq", if request irq fail at index i, the function return directly without releasing irq resources that already requested. 2.In "hns_nic_net_up" after "hns_nic_init_irq", if exceptional branch occurs, irqs that already requested are not release. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 31f6b61d ] If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code to wait rx fbd clean up when ae stopped. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 5778b13b ] After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively. Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow: static inline void napi_enable(struct napi_struct *n) { BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); smp_mb__before_clear_bit(); clear_bit(NAPI_STATE_SCHED, &n->state); } [37255.571996] Kernel panic - not syncing: BUG! [37255.595234] Call trace: [37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0 [37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28 [37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8 [37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c [37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0 [37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c [37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168 [37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c [37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68 [37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704 [37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4 [37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84 [37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c [37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618 [37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4 [37255.801139] SMP: stopping secondary CPUs [37255.805079] kbox: catch panic event. [37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072 [37255.816103] flush cache 0xffff80003f000000 size 0x800000 [37255.822192] flush cache 0xffff80003f000000 size 0x800000 [37255.828289] flush cache 0xffff80003f000000 size 0x800000 [37255.834378] kbox: no notify die func register. no need to notify [37255.840413] ---[ end Kernel panic - not syncing: BUG! This patchset fix this bug according to the flag NIC_STATE_DOWN. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 4ad26f11 ] According to the hip06 datasheet: 1.Six registers use wrong address: RCB_COM_SF_CFG_INTMASK_RING RCB_COM_SF_CFG_RING_STS RCB_COM_SF_CFG_RING RCB_COM_SF_CFG_INTMASK_BD RCB_COM_SF_CFG_BD_RINT_STS DSAF_INODE_VC1_IN_PKT_NUM_0_REG 2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be 0x103C + 0x80 * all_chn_num 3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be overwrite These registers are only used in "ethtool -d", so that did not cause ndev to misfunction. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 308c6caf ] There are two test cases: 1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio, and install them again, must use "ifconfig down/ifconfig up" command pair to bring port to work. This patch calls phy_stop function when init phy to fix this bug. 2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again, all ports can not use anymore, because of the phy devices register failed(phy devices already exists). Phy devices are registered when hns_dsaf installed, this patch removes them when hns_dsaf removed. The two cases are sometimes related, fixing the second case also requires fixing the first case, so fix them together. Signed-off-by:
-
Yonglong Liu authored
[ Upstream commit 4e1d4be6 ] According to the hip06 Datasheet: 1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num 2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 51367e42 ] The get_mac_address() function is normally inline, but when it is not, we get a warning that this configuration is broken: WARNING: vmlinux.o(.text+0x4aff00): Section mismatch in reference from the function w90p910_ether_setup() to the function .init.text:get_mac_address() The function w90p910_ether_setup() references the function __init get_mac_address(). This is often because w90p910_ether_setup lacks a __init Remove the __init to make it always do the right thing. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 2ab4c342 ] Clang warns: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element static const struct acpi_device_id xgene_enet_acpi_match[]; ^ 1 warning generated. Both xgene_enet_acpi_match and xgene_enet_of_match are defined before their uses at the bottom of the file so this is unnecessary. When CONFIG_ACPI is disabled, ACPI_PTR becomes NULL so xgene_enet_acpi_match doesn't need to be defined. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 9e6371d3 ] Add missing spin_lock_init() for cdev->np_lock. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Varun Prakash authored
[ Upstream commit 801df68d ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 9061193c ] Driver sends update-SVID ramrod in the MFW notification path. If there is a pending ramrod, driver doesn't retry the command and storm firmware will never be updated with the SVID value. The patch adds changes to send update-svid ramrod in process context with retry/poll flags set. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit 04f05230 ] Vlans are not getting removed when drivers are unloaded. The recent storm firmware versions had added safeguards against re-configuring an already configured vlan. As a result, PF inner reload flows (e.g., mtu change) might trigger an assertion. This change is going to remove vlans (same as we do for MACs) when doing a chip cleanup during unload. Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit bbf666c1 ] On some customer setups it was observed that shmem contains a non-zero fip MAC for 57711 which would lead to enabling of SW FCoE. Add a software workaround to clear the bad fip mac address if no FCoE connections are supported. Signed-off-by:
-
Pan Bian authored
[ Upstream commit 708abf74 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit e2ca26ec ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by:
Neel Mehta <nmehta@google.com> Reported-by:
Shane Huntley <shuntley@google.com> Reported-by:
Heather Adkins <argv@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit f1733a1d ] There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Hutterer authored
[ Upstream commit c201e380 ] ABS_RESERVED was added in d9ca1c99 and accidentally removed as part of ffe0e7cf when the high-resolution scrolling code was removed. Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
-
Fabio Estevam authored
[ Upstream commit f15096f1 ] According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959 ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 1e434b70 ] The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Paul Mackerras authored
[ Upstream commit 5564597d ] Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 614b1868 ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8 ("pinctrl: meson: fix pinconf bias disable") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 09 Jan, 2019 9 commits
-
-
Greg Kroah-Hartman authored
-
Lukas Wunner authored
commit 29bdedfd upstream. Commit e82b0b38 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b38 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomas Winkler authored
commit 2ba5780c upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0) Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit 3cc9ffbb upstream. Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: 9c6dfed9 ("rtc: m41t80: add alarm functionality") References: 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Will Deacon authored
commit df655b75 upstream. Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as signed, which is sign-extended when assigning to kvm->arch.vtcr. Lucky for us, the architecture currently treats these upper bits as RES0 so, whilst we've been naughty, we haven't set fire to anything yet. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit d391f120 upstream. I was investigating an issue with seabios >= 1.10 which stopped working for nested KVM on Hyper-V. The problem appears to be in handle_ept_violation() function: when we do fast mmio we need to skip the instruction so we do kvm_skip_emulated_instruction(). This, however, depends on VM_EXIT_INSTRUCTION_LEN field being set correctly in VMCS. However, this is not the case. Intel's manual doesn't mandate VM_EXIT_INSTRUCTION_LEN to be set when EPT MISCONFIG occurs. While on real hardware it was observed to be set, some hypervisors follow the spec and don't set it; we end up advancing IP with some random value. I checked with Microsoft and they confirmed they don't fill VM_EXIT_INSTRUCTION_LEN on EPT MISCONFIG. Fix the issue by doing instruction skip through emulator when running nested. Fixes: 68c3b4d1Suggested-by:
Radim Krčmář <rkrcmar@redhat.com> Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> [mhaboustak: backport to 4.9.y] Signed-off-by:
Mike Haboustak <haboustak@gmail.com> Signed-off-by:
-
Georgy A Bystrenin authored
commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by:
Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Aaro Koskinen authored
commit edefae94 upstream. Commit 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
-
Huacai Chen authored
commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
