- 12 Mar, 2017 40 commits
-
-
Michael Hernandez authored
commit 67f2db87 upstream. For target mode, we need to increase minimum vectors value by one to account for ATIO queue. Following stack trace will be seen Call Trace: qla24xx_config_rings+0x15a/0x230 [qla2xxx] qla2x00_init_rings+0x1a1/0x3a0 [qla2xxx] qla2x00_restart_isp+0x5c/0x120 [qla2xxx] qla2x00_abort_isp+0x138/0x430 [qla2xxx] ? __schedule+0x260/0x580 qla2x00_do_dpc+0x3bc/0x920 [qla2xxx] ? qla2x00_relogin+0x290/0x290 [qla2xxx] ? schedule+0x3a/0xa0 ? qla2x00_relogin+0x290/0x290 [qla2xxx] kthread+0x103/0x140 ? __kthread_init_worker+0x40/0x40 ret_from_fork+0x29/0x40 RIP: qlt_24xx_config_rings+0x6c/0x90 [mkp: fixed Fixes: hash] Fixes: 17e5fc58 ("scsi: qla2xxx: fix MSI-X vector affinity") Signed-off-by:
Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Hernandez authored
commit d0d2c68b upstream. Target mode initialization was not calculating response queue values correctly resulting into one less MSI-X vector. [mkp: fixed Fixes: hash] Fixes: 093df737 ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.") Signed-off-by:
-
Michael Hernandez authored
commit f54f2cb5 upstream. This patch cleaned up queue configuration code, such that once initialized, we should not touch msix_count value. This will prevent incorrect numbers of MSI-X vectors requested while performing target mode configuration. [mkp: fixed Fixes: hash] Fixes: d7459527 ("scsi: qla2xxx: Add multiple queue pair functionality.") Signed-off-by:
-
Long Li authored
commit 40630f46 upstream. On I/O errors, the Windows driver doesn't set data_transfer_length on error conditions other than SRB_STATUS_DATA_OVERRUN. In these cases we need to set data_transfer_length to 0, indicating there is no data transferred. On SRB_STATUS_DATA_OVERRUN, data_transfer_length is set by the Windows driver to the actual data transferred. Reported-by:
Shiva Krishna <Shiva.Krishna@nimblestorage.com> Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Long Li authored
commit bba5dc33 upstream. When sense message is present on error, we should pass along to the upper layer to decide how to deal with the error. This patch fixes connectivity issues with Fiber Channel devices. Signed-off-by:
-
Long Li authored
commit 3cd6d3d9 upstream. Properly set SRB flags when hosting device supports tagged queuing. This patch improves the performance on Fiber Channel disks. Signed-off-by:
-
Heinz Mauelshagen authored
commit d36a1954 upstream. The lvm2 sequence to manage dm-raid constructor flags that trigger a rebuild or a reshape is defined as: 1) load table with flags (e.g. rebuild/delta_disks/data_offset) 2) clear out the flags in lvm2 metadata 3) store the lvm2 metadata, reload the table to reset the flags previously established during the initial load (1) -- in order to prevent repeatedly requesting a rebuild or a reshape on activation Currently, loading an inactive table with rebuild/reshape flags specified will cause dm-raid to rebuild/reshape on resume and thus start updating the raid metadata (about the progress). When the second table reload, to reset the flags, occurs the constructor accesses the volatile progress state kept in the raid superblocks. Because the active mapping is still processing the rebuild/reshape, that position will be stale by the time the device is resumed. In the reshape case, this causes data corruption by processing already reshaped stripes again. In the rebuild case, it does _not_ cause data corruption but instead involves superfluous rebuilds. Fix by keeping the raid set frozen during the first resume and then allow the rebuild/reshape during the second resume. Fixes: 9dbd1aa3 ("dm raid: add reshaping support to the target") Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 37a098e9 upstream. The sloppy nature of lockless access to percpu pointers (s->current_path) in rr_select_path(), from multiple threads, is causing some paths to used more than others -- which results in less IO performance being observed. Revert these upstream commits to restore truly symmetric round-robin IO submission in DM multipath: b0b477c7 dm round robin: use percpu 'repeat_count' and 'current_path' 802934b2 dm round robin: do not use this_cpu_ptr() without having preemption disabled There is no benefit to all this complexity if repeat_count = 1 (which is the recommended default). Signed-off-by:
-
Mikulas Patocka authored
commit 60858318 upstream. Fixes: dfcfac3e ("dm stats: collect and report histogram of IO latencies") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit ca763d0a upstream. A rounding bug due to compiler generated temporary being 32bit was found in remap_to_cache(). A localized cast in remap_to_cache() fixes the corruption but this preferred fix (changing from uint32_t to sector_t) eliminates potential for future rounding errors elsewhere. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Chanwoo Choi authored
commit 30582c25 upstream. Until now, the trans_stat information of passive devfreq is not updated. This patch updates the trans_stat information after setting the target frequency of passive devfreq device. Fixes: 99613311 ("PM / devfreq: Add new passive governor") Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Chanwoo Choi authored
commit bcf23c79 upstream. The devfreq using passive governor is not able to change the governor. So, the user can not change the governor through 'available_governor' sysfs entry. Also, the devfreq which don't use the passive governor is not able to change to 'passive' governor on the fly. Fixes: 99613311 ("PM / devfreq: Add new passive governor") Signed-off-by:
-
Mimi Zohar authored
commit bc15ed66 upstream. On failure to return a pathname from ima_d_path(), a pointer to dname is returned, which is subsequently used in the IMA measurement list, the IMA audit records, and other audit logging. Saving the pointer to dname for later use has the potential to race with rename. Intead of returning a pointer to dname on failure, this patch returns a pointer to a copy of the filename. Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Davidlohr Bueso authored
commit 95e91b83 upstream. The issue is described here, with a nice testcase: https://bugzilla.kernel.org/show_bug.cgi?id=192931 The problem is that shmat() calls do_mmap_pgoff() with MAP_FIXED, and the address rounded down to 0. For the regular mmap case, the protection mentioned above is that the kernel gets to generate the address -- arch_get_unmapped_area() will always check for MAP_FIXED and return that address. So by the time we do security_mmap_addr(0) things get funky for shmat(). The testcase itself shows that while a regular user crashes, root will not have a problem attaching a nil-page. There are two possible fixes to this. The first, and which this patch does, is to simply allow root to crash as well -- this is also regular mmap behavior, ie when hacking up the testcase and adding mmap(... |MAP_FIXED). While this approach is the safer option, the second alternative is to ignore SHM_RND if the rounded address is 0, thus only having MAP_SHARED flags. This makes the behavior of shmat() identical to the mmap() case. The downside of this is obviously user visible, but does make sense in that it maintains semantics after the round-down wrt 0 address and mmap. Passes shm related ltp tests. Link: http://lkml.kernel.org/r/1486050195-18629-1-git-send-email-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Reported-by:
Gareth Evans <gareth.evans@contextis.co.uk> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stas Sergeev authored
commit 441398d3 upstream. Currently SS_AUTODISARM is not supported in compatibility mode, but does not return -EINVAL either. This makes dosemu built with -m32 on x86_64 to crash. Also the kernel's sigaltstack selftest fails if compiled with -m32. This patch adds the needed support. Link: http://lkml.kernel.org/r/20170205101213.8163-2-stsp@list.ruSigned-off-by:
Stas Sergeev <stsp@users.sourceforge.net> Cc: Milosz Tanski <milosz@adfin.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: Wang Xiaoqiang <wangxq10@lzu.edu.cn> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Michal Hocko authored
commit 71ab6cfe upstream. get_scan_count() considers the whole node LRU size when - doing SCAN_FILE due to many page cache inactive pages - calculating the number of pages to scan In both cases this might lead to unexpected behavior especially on 32b systems where we can expect lowmem memory pressure very often. A large highmem zone can easily distort SCAN_FILE heuristic because there might be only few file pages from the eligible zones on the node lru and we would still enforce file lru scanning which can lead to trashing while we could still scan anonymous pages. The later use of lruvec_lru_size can be problematic as well. Especially when there are not many pages from the eligible zones. We would have to skip over many pages to find anything to reclaim but shrink_node_memcg would only reduce the remaining number to scan by SWAP_CLUSTER_MAX at maximum. Therefore we can end up going over a large LRU many times without actually having chance to reclaim much if anything at all. The closer we are out of memory on lowmem zone the worse the problem will be. Fix this by filtering out all the ineligible zones when calculating the lru size for both paths and consider only sc->reclaim_idx zones. The patch would need to be tweaked a bit to apply to 4.10 and older but I will do that as soon as it hits the Linus tree in the next merge window. Link: http://lkml.kernel.org/r/20170117103702.28542-3-mhocko@kernel.org Fixes: b2e18757 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by:
Michal Hocko <mhocko@suse.com> Tested-by:
Trevor Cordes <trevor@tecnopolis.ca> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Acked-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Michal Hocko authored
commit fd538803 upstream. lruvec_lru_size returns the full size of the LRU list while we sometimes need a value reduced only to eligible zones (e.g. for lowmem requests). inactive_list_is_low is one such user. Later patches will add more of them. Add a new parameter to lruvec_lru_size and allow it filter out zones which are not eligible for the given context. Link: http://lkml.kernel.org/r/20170117103702.28542-2-mhocko@kernel.orgSigned-off-by:
-
Yisheng Xie authored
commit 9c57b580 upstream. With CONFIG_BALLOON_COMPACTION=y the kernel will mount balloon_mnt for balloon page migration when we probe a virtio_balloon device. However we do not unmount it when removing the device. Fix this. Fixes: b1123ea6 ("mm: balloon: use general non-lru movable page feature") Link: http://lkml.kernel.org/r/1486531318-35189-1-git-send-email-xieyisheng1@huawei.comSigned-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Acked-by:
-
Minchan Kim authored
commit dd8416c4 upstream. With rw_page, page_endio is used for completing IO on a page and it propagates write error to the address space if the IO fails. The problem is it accesses page->mapping directly which might be okay for file-backed pages but it shouldn't for anonymous page. Otherwise, it can corrupt one of field from anon_vma under us and system goes panic randomly. swap_writepage bdev_writepage ops->rw_page I encountered the BUG during developing new zram feature and it was really hard to figure it out because it made random crash, somtime mmap_sem lockdep, sometime other places where places never related to zram/zsmalloc, and not reproducible with some configuration. When I consider how that bug is subtle and people do fast-swap test with brd, it's worth to add stable mark, I think. Fixes: dd6bd0d9 ("swap: use bdev_read_page() / bdev_write_page()") Signed-off-by:
-
Vinayak Menon authored
commit e1587a49 upstream. At the end of a window period, if the reclaimed pages is greater than scanned, an unsigned underflow can result in a huge pressure value and thus a critical event. Reclaimed pages is found to go higher than scanned because of the addition of reclaimed slab pages to reclaimed in shrink_node without a corresponding increment to scanned pages. Minchan Kim mentioned that this can also happen in the case of a THP page where the scanned is 1 and reclaimed could be 512. Link: http://lkml.kernel.org/r/1486641577-11685-1-git-send-email-vinmenon@codeaurora.orgSigned-off-by:
Vinayak Menon <vinmenon@codeaurora.org> Acked-by:
-
Gavin Shan authored
commit e02dc017 upstream. When @node_reclaim_node isn't 0, the page allocator tries to reclaim pages if the amount of free memory in the zones are below the low watermark. On Power platform, none of NUMA nodes are scanned for page reclaim because no nodes match the condition in zone_allows_reclaim(). On Power platform, RECLAIM_DISTANCE is set to 10 which is the distance of Node-A to Node-A. So the preferred node even won't be scanned for page reclaim. __alloc_pages_nodemask() get_page_from_freelist() zone_allows_reclaim() Anton proposed the test code as below: # cat alloc.c : int main(int argc, char *argv[]) { void *p; unsigned long size; unsigned long start, end; start = time(NULL); size = strtoul(argv[1], NULL, 0); printf("To allocate %ldGB memory\n", size); size <<= 30; p = malloc(size); assert(p); memset(p, 0, size); end = time(NULL); printf("Used time: %ld seconds\n", end - start); sleep(3600); return 0; } The system I use for testing has two NUMA nodes. Both have 128GB memory. In below scnario, the page caches on node#0 should be reclaimed when it encounters pressure to accommodate request of allocation. # echo 2 > /proc/sys/vm/zone_reclaim_mode; \ sync; \ echo 3 > /proc/sys/vm/drop_caches; \ # taskset -c 0 cat file.32G > /dev/null; \ grep FilePages /sys/devices/system/node/node0/meminfo Node 0 FilePages: 33619712 kB # taskset -c 0 ./alloc 128 # grep FilePages /sys/devices/system/node/node0/meminfo Node 0 FilePages: 33619840 kB # grep MemFree /sys/devices/system/node/node0/meminfo Node 0 MemFree: 186816 kB With the patch applied, the pagecache on node-0 is reclaimed when its free memory is running out. It's the expected behaviour. # echo 2 > /proc/sys/vm/zone_reclaim_mode; \ sync; \ echo 3 > /proc/sys/vm/drop_caches # taskset -c 0 cat file.32G > /dev/null; \ grep FilePages /sys/devices/system/node/node0/meminfo Node 0 FilePages: 33605568 kB # taskset -c 0 ./alloc 128 # grep FilePages /sys/devices/system/node/node0/meminfo Node 0 FilePages: 1379520 kB # grep MemFree /sys/devices/system/node/node0/meminfo Node 0 MemFree: 317120 kB Fixes: 5f7a75ac ("mm: page_alloc: do not cache reclaim distances") Link: http://lkml.kernel.org/r/1486532455-29613-1-git-send-email-gwshan@linux.vnet.ibm.comSigned-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by:
-
Dan Williams authored
commit b5d24fda upstream. The mem_hotplug_{begin,done} lock coordinates with {get,put}_online_mems() to hold off "readers" of the current state of memory from new hotplug actions. mem_hotplug_begin() expects exclusive access, via the device_hotplug lock, to set mem_hotplug.active_writer. Calling mem_hotplug_begin() without locking device_hotplug can lead to corrupting mem_hotplug.refcount and missed wakeups / soft lockups. [dan.j.williams@intel.com: v2] Link: http://lkml.kernel.org/r/148728203365.38457.17804568297887708345.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/148693885680.16345.17802627926777862337.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: f931ab47 ("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 9c25702c upstream. Currently we call copy_page_to_iter() for uncached reading into a pipe. This is wrong because it treats pages as VFS cache pages and copies references rather than actual data. When we are trying to read from the pipe we end up calling page_cache_pipe_buf_confirm() which returns -ENODATA. This error is translated into 0 which is returned to a user. This issue is reproduced by running xfs-tests suite (generic test #249) against mount points with "cache=none". Fix it by mapping pages manually and calling copy_to_iter() that copies data into the pipe. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Ashok Raj authored
commit 21e722c4 upstream. The check to set identity map for tylersburg is done too late. It needs to be done before the check for identity_map domain is done. To: Joerg Roedel <joro@8bytes.org> To: David Woodhouse <dwmw2@infradead.org> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: Ashok Raj <ashok.raj@intel.com> Fixes: 86080ccc ("iommu/vt-d: Allocate si_domain in init_dmars()") Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Reported-by:
Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
CQ Tang authored
commit aaa59306 upstream. Some of the macros are incorrect with wrong bit-shifts resulting in picking the incorrect invalidation granularity. Incorrect Source-ID in extended devtlb invalidation caused device side errors. To: Joerg Roedel <joro@8bytes.org> To: David Woodhouse <dwmw2@infradead.org> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: CQ Tang <cq.tang@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Fixes: 2f26e0a9 ("iommu/vt-d: Add basic SVM PASID support") Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
-
Wei Yongjun authored
commit 5939eaf4 upstream. Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826 ("tpm_tis: Clean up the force=1 module parameter") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Maciej S. Szmigiero authored
commit 1d70fe9d upstream. Since commit 1107d065 ("tpm_tis: Introduce intermediate layer for TPM access") Atmel 3203 TPM on ThinkPad X61S (TPM firmware version 13.9) no longer works. The initialization proceeds fine until we get and start using chip-reported timeouts - and the chip reports C and D timeouts of zero. It turns out that until commit 8e54caf4 ("tpm: Provide a generic means to override the chip returned timeouts") we had actually let default timeout values remain in this case, so let's bring back this behavior to make chips like Atmel 3203 work again. Use a common code that was introduced by that commit so a warning is printed in this case and /sys/class/tpm/tpm*/timeouts correctly says the timeouts aren't chip-original. Fixes: 1107d065 ("tpm_tis: Introduce intermediate layer for TPM access") Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by:
-
Leonard Crestez authored
commit e42a46b6 upstream. It is allowed to call regulator_get with a NULL dev argument (_regulator_get explicitly checks for it) but this causes an error later when printing /sys/kernel/debug/regulator_summary. Fix this by explicitly handling "deviceless" consumers in the debugfs code. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Wang Nan authored
commit f0944463 upstream. Commit d52c9750 ("coresight: reset "enable_sink" flag when need be") caused a kernel panic because of the using of an invalid value: after 'for_each_cpu(cpu, mask)', value of local variable 'cpu' become invalid, causes following 'cpu_to_node' access invalid memory area. This patch brings the deleted 'cpu = cpumask_first(mask)' back. Panic log: $ perf record -e cs_etm// ls Unable to handle kernel paging request at virtual address fffe801804af4f10 pgd = ffff8017ce031600 [fffe801804af4f10] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 33 PID: 1619 Comm: perf Not tainted 4.7.1+ #16 Hardware name: Huawei Taishan 2280 /CH05TEVBA, BIOS 1.10 11/24/2016 task: ffff8017cb0c8400 ti: ffff8017cb154000 task.ti: ffff8017cb154000 PC is at tmc_alloc_etf_buffer+0x60/0xd4 LR is at tmc_alloc_etf_buffer+0x44/0xd4 pc : [<ffff000008633df8>] lr : [<ffff000008633ddc>] pstate: 60000145 sp : ffff8017cb157b40 x29: ffff8017cb157b40 x28: 0000000000000000 ...skip... 7a60: ffff000008c64dc8 0000000000000006 0000000000000253 ffffffffffffffff 7a80: 0000000000000000 0000000000000000 ffff0000080872cc 0000000000000001 [<ffff000008633df8>] tmc_alloc_etf_buffer+0x60/0xd4 [<ffff000008632b9c>] etm_setup_aux+0x1dc/0x1e8 [<ffff00000816eed4>] rb_alloc_aux+0x2b0/0x338 [<ffff00000816a5e4>] perf_mmap+0x414/0x568 [<ffff0000081ab694>] mmap_region+0x324/0x544 [<ffff0000081abbe8>] do_mmap+0x334/0x3e0 [<ffff000008191150>] vm_mmap_pgoff+0xa4/0xc8 [<ffff0000081a9a30>] SyS_mmap_pgoff+0xb0/0x22c [<ffff0000080872e4>] sys_mmap+0x18/0x28 [<ffff0000080843f0>] el0_svc_naked+0x24/0x28 Code: 912040a5 d0001c00 f873d821 911c6000 (b8656822) ---[ end trace 98933da8f92b0c9a ]--- Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Xia Kaixu <xiakaixu@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: d52c9750 ("coresight: reset "enable_sink" flag when need be") Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
commit 4474f4c4 upstream. The stm is automatically enabled when an application sets the policy via ->link() call back by using coresight_enable(), which keeps the refcount of the current users of the STM. However, the unlink() callback issues stm_disable() directly, which leaves the STM turned off, without the coresight layer knowing about it. This prevents any further uses of the STM hardware as the coresight layer still thinks the STM is turned on and doesn't enable the hardware when required. Even manually enabling the STM via sysfs can't really enable the hw. e.g, $ echo 1 > $CS_DEVS/$ETR/enable_sink $ mkdir -p $CONFIG_FS/stp-policy/$source.0/stm_test/ $ echo 32768 65535 > $CONFIG_FS/stp-policy/$source.0/stm_test/channels $ echo 64 > $CS_DEVS/$source/traceid $ ./stm_app Sending 64000 byte blocks of pattern 0 at 0us intervals Success to map channel(32768~32783) to 0xffffa95fa000 Sending on channel 32768 $ dd if=/dev/$ETR of=~/trace.bin.1 597+1 records in 597+1 records out 305920 bytes (306 kB) copied, 0.399952 s, 765 kB/s $ ./stm_app Sending 64000 byte blocks of pattern 0 at 0us intervals Success to map channel(32768~32783) to 0xffff7e9e2000 Sending on channel 32768 $ dd if=/dev/$ETR of=~/trace.bin.2 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.0232083 s, 0.0 kB/s Note that we don't get any data from the ETR for the second session. Also dmesg shows : [ 77.520458] coresight-tmc 20800000.etr: TMC-ETR enabled [ 77.537097] coresight-replicator etr_replicator@20890000: REPLICATOR enabled [ 77.558828] coresight-replicator main_replicator@208a0000: REPLICATOR enabled [ 77.581068] coresight-funnel 208c0000.main_funnel: FUNNEL inport 0 enabled [ 77.602217] coresight-tmc 20840000.etf: TMC-ETF enabled [ 77.618422] coresight-stm 20860000.stm: STM tracing enabled [ 139.554252] coresight-stm 20860000.stm: STM tracing disabled # End of first tracing session [ 146.351135] coresight-tmc 20800000.etr: TMC read start [ 146.514486] coresight-tmc 20800000.etr: TMC read end # Note that the STM is not turned on via stm_generic_link()->coresight_enable() # and hence none of the components are turned on. [ 152.479080] coresight-tmc 20800000.etr: TMC read start [ 152.542632] coresight-tmc 20800000.etr: TMC read end This patch fixes the problem by balancing the unlink operation by using the coresight_disable(), keeping the coresight layer in sync with the hardware state and thus allowing normal usage of the STM component. Fixes: commit 237483aa ("coresight: stm: adding driver for CoreSight STM component") Cc: Pratik Patel <pratikp@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Chunyan Zhang <zhang.chunyan@linaro.org> Reported-by:
Robert Walker <robert.walker@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 6e017006 upstream. gcc-7 detects that wlanhdr_to_ethhdr() in two drivers calls memcpy() with a destination argument that an earlier function call may have set to NULL: staging/rtl8188eu/core/rtw_recv.c: In function 'wlanhdr_to_ethhdr': staging/rtl8188eu/core/rtw_recv.c:1318:2: warning: argument 1 null where non-null expected [-Wnonnull] staging/rtl8712/rtl871x_recv.c: In function 'r8712_wlanhdr_to_ethhdr': staging/rtl8712/rtl871x_recv.c:649:2: warning: argument 1 null where non-null expected [-Wnonnull] I'm fixing this by adding a NULL pointer check and returning failure from the function, which is hopefully already handled properly. This seems to date back to when the drivers were originally added, so backporting the fix to stable seems appropriate. There are other related realtek drivers in the kernel, but none of them contain a function with a similar name or produce this warning. Fixes: 1cc18a22 ("staging: r8188eu: Add files for new driver - part 5") Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Oleg Drokin authored
commit dc7ffefd upstream. This is unbreaking another of those "stealth" janitor patches that got in and subtly broke some things. sv_cpt_data is a pointer to pointer, so need to dereference it twice to allocate the correct structure size. Fixes: 9899cb68 ("Staging: lustre: rpc: Use sizeof type *pointer instead of sizeof type.") CC: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Reviewed-by:
James Simmons <jsimmons@infradead.org> Reviewed-by:
Doug Oucharek <doug.s.oucharek@intel.com> Signed-off-by:
-
Johan Hovold authored
commit 33b8807a upstream. The loopback driver allows the user to set a minimum delay of up to one second to be inserted between test iterations (i.e. request submissions). The delay is currently specified in microseconds and is implemented using udelay. Busy looping for long periods is not just anti-social; udelay must not be used for delays longer than a few milliseconds due to the risk of integer overflow. Replace the broken udelay with a usleep_range with a 100 us range for short delays (< 20 ms) and otherwise revert to using msleep. Fixes: b36f04fa ("greybus: loopback: Convert thread delay to microseconds") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Guenter Roeck authored
commit 82dbe987 upstream. If sensor attributes were never read, the pwm control data has not been initiialized, which can cause wrong driver behavior. Ensure that cached data is current before acting on it. Reported-by:
Kevin Folz <kfolz@evertz.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
commit 4c7b8ca1 upstream. In IT8620E, after setting pwm control to manual, it was observed that pwm values for fan 4..6 have reversed results (writing 0 results in fans running at full speed, writing 255 results in fans turned off). With the new PWM control, pwm polarity for pwm control 4..6 is specified in its pwm control registers. Those registers are overwritten when setting the pwm mode or the temperature mapping. Do not touch bit 2..6 of pwm control registers on register writes to fix the problem. Signed-off-by:
-
Hui Wang authored
commit 29693efc upstream. On this machine, the micmute button is connected to Line2 of the codec and the micmute led is connected to GPIO2 of the codec. After applying this quirk, both hotkey and led work well. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 493de342 upstream. Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like Inspiron 7599 to support its subwoofer speaker. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191Signed-off-by:
-
Takashi Iwai authored
commit f3ac9f73 upstream. The sequencer FIFO management has a bug that may lead to a corruption (shortage) of the cell linked list. When a sequencer client faces an error at the event delivery, it tries to put back the dequeued cell. When the first queue was put back, this forgot the tail pointer tracking, and the link will be screwed up. Although there is no memory corruption, the sequencer client may stall forever at exit while flushing the pending FIFO cells in snd_seq_pool_done(), as spotted by syzkaller. This patch addresses the missing tail pointer tracking at snd_seq_fifo_cell_putback(). Also the patch makes sure to clear the cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar mess-up of the FIFO linked list. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 15c75b09 upstream. Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit architectures, and bails out if it fails. This causes a problem on some platforms since the 64bit DMA isn't always guaranteed. We should fall back to the default 32bit DMA when 64bit DMA fails. Fixes: 6d74b86d ("ALSA: ctxfi - Allow 64bit DMA") Signed-off-by:
-
Takashi Iwai authored
commit 71321eb3 upstream. When a user sets a too small ticks with a fine-grained timer like hrtimer, the kernel tries to fire up the timer irq too frequently. This may lead to the condensed locks, eventually the kernel spinlock lockup with warnings. For avoiding such a situation, we define a lower limit of the resolution, namely 1ms. When the user passes a too small tick value that results in less than that, the kernel returns -EINVAL now. Reported-by:
-
