We currently allocate different levels of page tables with a variety of
differing flags, and the PGALLOC_GFP flags, intended for use when
allocating any level of page table, are only used for ptes in
pte_alloc_one. On x86, PGALLOC_GFP is used for all page table
allocations.

Currently the major differences are:

* __GFP_NOTRACK -- Needed to ensure page tables are always accessible in
  the presence of kmemcheck to prevent recursive faults. Currently
  kmemcheck cannot be selected for arm64.

* __GFP_REPEAT -- Causes the allocator to try to reclaim pages and retry
  upon a failure to allocate.

* __GFP_ZERO -- Sometimes passed explicitly, sometimes zalloc variants
  are used.

While we've no encountered issues so far, it would be preferable to be
consistent. This patch ensures all levels of table are allocated in the
same manner, with PGALLOC_GFP.

Cc: Steve Capper <steve.capper@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Since commit 8a0a9bd4 ('random: make get_random_int() more
random'), get_random_int() returns a random value for each call,
so comment and hack introduced in mmap_rnd() as part of commit
1d18c47c ('arm64: MMU fault handling and page table management')
are incorrects.

Commit 1d18c47c seems to use the same hack introduced by
commit a5adc91a ('powerpc: Ensure random space between stack
and mmaps'), latter copied in commit 5a0efea0 ('sparc64: Sharpen
address space randomization calculations.').

But both architectures were cleaned up as part of commit
fa8cbaaf ('powerpc+sparc64/mm: Remove hack in mmap randomize
layout') as hack is no more needed since commit 8a0a9bd4.

So the present patch removes the comment and the hack around
get_random_int() on AArch64's mmap_rnd().

Cc: David S. Miller <davem@davemloft.net>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Commit a469abd0 (ARM: elf: add new hwcap for identifying atomic
ldrd/strd instructions) introduces HWCAP_ELF for 32-bit ARM
applications. As LPAE is always present on arm64, report the
corresponding compat HWCAP to user space.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # 3.11+
Signed-off-by: Will Deacon <will.deacon@arm.com>

On architectures with hardware broadcasting of TLB invalidation messages
, it makes sense to reduce the range of the mmu_gather structure when
unmapping page ranges based on the dirty address information passed to
tlb_remove_tlb_entry.

arm64 already does this by directly manipulating the start/end fields
of the gather structure, but this confuses the generic code which
does not expect these fields to change and can end up calculating
invalid, negative ranges when forcing a flush in zap_pte_range.

This patch moves the minimal range calculation out of the arm64 code
and into the generic implementation, simplifying zap_pte_range in the
process (which no longer needs to care about start/end, since they will
point to the appropriate ranges already). With the range being tracked
by core code, the need_flush flag is dropped in favour of checking that
the end of the range has actually been set.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The push/pop instructions can be suboptimal when saving/restoring large
amounts of data to/from the stack, for example on entry/exit from the
kernel. This is because:

  (1) They act on descending addresses (i.e. the newly decremented sp),
      which may defeat some hardware prefetchers

  (2) They introduce an implicit dependency between each instruction, as
      the sp has to be updated in order to resolve the address of the
      next access.

This patch removes the push/pop instructions from our kernel entry/exit
macros in favour of ldp/stp plus offset.
Signed-off-by: Will Deacon <will.deacon@arm.com>

Using an explicit adr instruction to set the link register to point at
ret_fast_syscall/ret_to_user can defeat branch and return stack predictors.

Instead, use the standard calling instructions (bl, blr) and have an
unconditional branch as the following instruction.
Signed-off-by: Will Deacon <will.deacon@arm.com>

Commit d7a49086 (arm64: cpuinfo: print info for all CPUs)
attempted to clean up /proc/cpuinfo, but due to concerns regarding
further changes was reverted in commit 5e39977e (Revert "arm64:
cpuinfo: print info for all CPUs").

There are two major issues with the arm64 /proc/cpuinfo format
currently:

* The "Features" line describes (only) the 64-bit hwcaps, which is
  problematic for some 32-bit applications which attempt to parse it. As
  the same names are used for analogous ISA features (e.g. aes) despite
  these generally being architecturally unrelated, it is not possible to
  simply append the 64-bit and 32-bit hwcaps in a manner that might not
  be misleading to some applications.

  Various potential solutions have appeared in vendor kernels. Typically
  the format of the Features line varies depending on whether the task
  is 32-bit.

* Information is only printed regarding a single CPU. This does not
  match the ARM format, and does not provide sufficient information in
  big.LITTLE systems where CPUs are heterogeneous. The CPU information
  printed is queried from the current CPU's registers, which is racy
  w.r.t. cross-cpu migration.

This patch attempts to solve these issues. The following changes are
made:

* When a task with a LINUX32 personality attempts to read /proc/cpuinfo,
  the "Features" line contains the decoded 32-bit hwcaps, as with the
  arm port. Otherwise, the decoded 64-bit hwcaps are shown. This aligns
  with the behaviour of COMPAT_UTS_MACHINE and COMPAT_ELF_PLATFORM. In
  the absense of compat support, the Features line is empty.

  The set of hwcaps injected into a task's auxval are unaffected.

* Properties are printed per-cpu, as with the ARM port. The per-cpu
  information is queried from pre-recorded cpu information (as used by
  the sanity checks).

* As with the previous attempt at fixing up /proc/cpuinfo, the hardware
  field is removed. The only users so far are 32-bit applications tied
  to particular boards, so no portable applications should be affected,
  and this should prevent future tying to particular boards.

The following differences remain:

* No model_name is printed, as this cannot be queried from the hardware
  and cannot be provided in a stable fashion. Use of the CPU
  {implementor,variant,part,revision} fields is sufficient to identify a
  CPU and is portable across arm and arm64.

* The following system-wide properties are not provided, as they are not
  possible to provide generally. Programs relying on these are already
  tied to particular (32-bit only) boards:
  - Hardware
  - Revision
  - Serial

No software has yet been identified for which these remaining
differences are problematic.

Cc: Greg Hackmann <ghackmann@google.com>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Serban Constantinescu <serban.constantinescu@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: cross-distro@lists.linaro.org
Cc: linux-api@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Replace two instances of 'ldr xN, =(constant)' in the world switch
hot path with 'mov' instructions.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Replace ldr xN, =<symbol> with adrp/add or adrp/ldr [as appropriate]
in the implementation of _mcount(), which may be called very often.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

In certain debugging scenarios it's useful to know the physical ID (i.e.
the MPIDR_EL1.Aff* fields) of the boot CPU, but we don't currently log
this as we do for 32-bit ARM kernels.

This patch makes the kernel log the physical ID of the boot CPU early in
the boot process. The CPU logical map initialisation is folded in to
smp_setup_processor_id (which contrary to its name is also called by UP
kernels). This is called before setup_arch, so should not adversely
affect existing cpu_logical_map users.
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Lorenzo Pieralisis <lorenzo.pieralisi@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This patch implements the AES key schedule generation using ARMv8
Crypto Instructions. It replaces the table based C implementation
in aes_generic.ko, which means we can drop the dependency on that
module.
Tested-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Some of the macros defined in kvm_arm.h are useful in assembly files, but are
not compatible with the assembler.  Change any C language integer constant
definitions using appended U, UL, or ULL to the UL() preprocessor macro.  Also,
add a preprocessor include of the asm/memory.h file which defines the UL()
macro.

Fixes build errors like these when using kvm_arm.h in assembly
source files:

  Error: unexpected characters following instruction at operand 3 -- `and x0,x1,#((1U<<25)-1)'
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

This installs the machine name as recorded by setup_machine_fdt()
as dump stack arch description. This results in the string to be
included in call stack dumps, as is shown here:

  ...
  Bad mode in Synchronous Abort handler detected, code 0x84000005
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #548
> Hardware name: linux,dummy-virt (DT)
  task: ffffffc07c870000 ti: ffffffc07c878000 task.ti: ffffffc07c878000
  PC is at 0x0
  ...

Note that systems that support DMI/SMBIOS may override this later.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

The arm64 architecture has the ability to exclusively load and store
a pair of registers from an address (ldxp/stxp). Also the SLUB can take
advantage of a cmpxchg_double implementation to avoid taking some
locks.

This patch provides an implementation of cmpxchg_double for 64-bit
pairs, and activates the logic required for the SLUB to use these
functions (HAVE_ALIGNED_STRUCT_PAGE and HAVE_CMPXCHG_DOUBLE).

Also definitions of this_cpu_cmpxchg_8 and this_cpu_cmpxchg_double_8
are wired up to cmpxchg_local and cmpxchg_double_local (rather than the
stock implementations that perform non-atomic operations with
interrupts disabled) as they are used by the SLUB.

On a Juno platform running on only the A57s I get quite a noticeable
performance improvement with 5 runs of hackbench on v3.17:

         Baseline | With Patch
 -----------------+-----------
 Mean    119.2312 | 106.1782
 StdDev    0.4919 |   0.4494

(times taken to complete `./hackbench 100 process 1000', in seconds)
Signed-off-by: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Optimize memcpy_{from,to}io() and memset_io() by transferring in 64 bit
as much as possible with minimized barrier usage.  This simplest
optimization brings faster throughput compare to current byte-by-byte read
and write with barrier in the loop.  Code's skeleton is taken from the
powerpc.

Link: http://lkml.kernel.org/p/20141020133304.GH23751@e104818-lin.cambridge.arm.comReviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Trilok Soni <tsoni@codeaurora.org>
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Use phys_addr_t for physical address in alloc_init_pud. Although
phys_addr_t and unsigned long are 64 bit in arm64, it is better
to use phys_addr_t to describe physical addresses.
Signed-off-by: Min-Hua Chen <orca.chen@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull UEFI updates from Ard Biesheuvel:

  - fixes for compliance with PE/COFF and UEFI specs
  - added support for SMBIOS, including upcoming version 3.0
  - cleanups and diagnostic output improvements
Signed-off-by: Will Deacon <will.deacon@arm.com>

In the absence of a DTB configuration table, the EFI stub will happily
continue attempting to boot a kernel, despite the fact that this kernel
may not function without a description of the hardware. In this case, as
with a typo'd "dtb=" option (e.g. "dbt=") or many other possible
failures, the only output seen by the user will be the rather terse
output from the EFI stub:

EFI stub: Booting Linux Kernel...

To aid those attempting to debug such failures, this patch adds a notice
when no DTB is found, making the output more helpful:

EFI stub: Booting Linux Kernel...
EFI stub: Generating empty DTB

Additionally, a positive acknowledgement is added when a user-specified
DTB is in use:

EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from command line

Similarly, a positive acknowledgement is added when a DTB from a
configuration table is in use:

EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

This sets the DMI string, containing system type, serial number,
firmware version etc. as dump stack arch description, so that oopses
and other kernel stack dumps automatically have this information
included, if available.
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

SMBIOS is important for server hardware vendors. It implements a spec for
providing descriptive information about the platform. Things like serial
numbers, physical layout of the ports, build configuration data, and the like.
Signed-off-by: Yi Li <yi.li@linaro.org>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The DMTF SMBIOS reference spec v3.0.0 defines a new 64-bit entry point,
which enables support for SMBIOS structure tables residing at a physical
offset over 4 GB. This is especially important for upcoming arm64
platforms whose system RAM resides entirely above the 4 GB boundary.

For the UEFI case, this code attempts to detect the new SMBIOS 3.0
header magic at the offset passed in the SMBIOS3_TABLE_GUID UEFI
configuration table. If this configuration table is not provided, or
if we fail to parse the header, we fall back to using the legacy
SMBIOS_TABLE_GUID configuration table. This is in line with the spec,
that allows both configuration tables to be provided, but mandates that
they must point to the same structure table, unless the version pointed
to by the 64-bit entry point is a superset of the 32-bit one.

For the non-UEFI case, the detection logic is modified to look for the
SMBIOS 3.0 header magic before it looks for the legacy header magic.

Note that this patch is based on version 3.0.0d [draft] of the
specification, which is expected not to deviate from the final version
in ways that would affect the correctness of this implementation.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

This adds support to the UEFI side for detecting the presence of
a SMBIOS 3.0 64-bit entry point. This allows the actual SMBIOS
structure table to reside at a physical offset over 4 GB, which
cannot be supported by the legacy SMBIOS 32-bit entry point.

Since the firmware can legally provide both entry points, store
the SMBIOS 3.0 entry point in a separate variable, and let the
DMI decoding layer decide which one will be used.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

The EFI_CONFIG_TABLES bit already gets set by efi_config_init(),
so there is no reason to set it again after this function returns
successfully.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Instead of reserving the memory regions based on which types we know
need to be reserved, consider only regions of the following types as
free for general use by the OS:

EFI_LOADER_CODE
EFI_LOADER_DATA
EFI_BOOT_SERVICES_CODE
EFI_BOOT_SERVICES_DATA
EFI_CONVENTIONAL_MEMORY

Note that this also fixes a problem with the original code, which would
misidentify a EFI_RUNTIME_SERVICES_DATA region as not reserved if it
does not have the EFI_MEMORY_RUNTIME attribute set. However, it is
perfectly legal for the firmware not to request a virtual mapping for
EFI_RUNTIME_SERVICES_DATA regions that contain configuration tables, in
which case the EFI_MEMORY_RUNTIME attribute would not be set.
Acked-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Change our PE/COFF header to use the minimum file alignment of
512 bytes (0x200), as mandated by the PE/COFF spec v8.3

Also update the linker script so that the Image file itself is also a
round multiple of FileAlignment.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Position independent AArch64 code needs to be linked and loaded at the
same relative offset from a 4 KB boundary, or adrp/add and adrp/ldr
pairs will not work correctly. (This is how PC relative symbol
references with a 4 GB reach are emitted)

We need to declare this in the PE/COFF header, otherwise the PE/COFF
loader may load the Image and invoke the stub at an offset which
violates this rule.
Reviewed-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

After the EFI stub has done its business, it jumps into the kernel by
branching to offset #0 of the loaded Image, which is where it expects
to find the header containing a 'branch to stext' instruction.

However, the UEFI spec 2.1.1 states the following regarding PE/COFF
image loading:
"A UEFI image is loaded into memory through the LoadImage() Boot
Service. This service loads an image with a PE32+ format into memory.
This PE32+ loader is required to load all sections of the PE32+ image
into memory."

In other words, it is /not/ required to load parts of the image that are
not covered by a PE/COFF section, so it may not have loaded the header
at the expected offset, as it is not covered by any PE/COFF section.

So instead, jump to 'stext' directly, which is at the base of the
PE/COFF .text section, by supplying a symbol 'stext_offset' to
efi-entry.o which contains the relative offset of stext into the Image.
Also replace other open coded calculations of the same value with a
reference to 'stext_offset'
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another small batch of fixes.

  Most of these make zynq, socfpga and sunxi platforms work a bit
  better:

   - due to new requirements for regulators, DWMMC on socfpga broke past
     v3.17
   - SMP spinup fix for socfpga
   - a few DT fixes for zynq
   - another option (FIXED_REGULATOR) for sunxi is needed that used to
     be selected by other options but no longer is.
   - a couple of small DT fixes for at91
   - ...and a couple for i.MX"

* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
  ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
  ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: dts: socfpga: Add a 3.3V fixed regulator node
  ARM: dts: socfpga: Fix SD card detect
  ARM: dts: socfpga: rename gpio nodes
  ARM: at91/dt: sam9263: fix PLLB frequencies
  power: reset: at91-reset: fix power down register
  MAINTAINERS: add atmel ssc driver maintainer entry
  arm: socfpga: fix fetching cpu1start_addr for SMP
  ARM: zynq: DT: trivial: Fix mc node
  ARM: zynq: DT: Add cadence watchdog node
  ARM: zynq: DT: Add missing reference for memory-controller
  ARM: zynq: DT: Add missing reference for ADC
  ARM: zynq: DT: Add missing address for L2 pl310
  ARM: zynq: DT: Remove 222 MHz OPP
  ARM: zynq: DT: Fix GEM register area size

Pull vfs updates from Al Viro:
 "overlayfs merge + leak fix for d_splice_alias() failure exits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  overlayfs: embed middle into overlay_readdir_data
  overlayfs: embed root into overlay_readdir_data
  overlayfs: make ovl_cache_entry->name an array instead of pointer
  overlayfs: don't hold ->i_mutex over opening the real directory
  fix inode leaks on d_splice_alias() failure exits
  fs: limit filesystem stacking depth
  overlay: overlay filesystem documentation
  overlayfs: implement show_options
  overlayfs: add statfs support
  overlay filesystem
  shmem: support RENAME_WHITEOUT
  ext4: support RENAME_WHITEOUT
  vfs: add RENAME_WHITEOUT
  vfs: add whiteout support
  vfs: export check_sticky()
  vfs: introduce clone_private_mount()
  vfs: export __inode_permission() to modules
  vfs: export do_splice_direct() to modules
  vfs: add i_op->dentry_open()

Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Merge "ARM: imx: fixes for 3.18" from Shawn Guo:

The i.MX fixes for 3.18:
 - Revert one patch which increases I2C bus frequency on imx28-evk
 - Fix a typo on imx6q EIM clock name

* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-evk: Let i2c0 run at 100kHz
  ARM: i.MX6: Fix "emi" clock name typo
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit 78b81f46 ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues
when doing the following sequence in loop:

- Boot the kernel
- Perform audio playback
- Reboot the system via 'reboot' command

In many times the audio card cannot be probed, which causes playback to fail.

After restoring to the original i2c0 frequency of 100kHz there is no such
problem anymore.

This reverts commit 78b81f46.

Cc: <stable@vger.kernel.org> # 3.16+
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Fix a typo error, the "emi" names refer to the eim clocks.

The change fixes typo in EIM and EIM_SLOW pre-output dividers and
selectors clock names. Notably EIM_SLOW clock itself is named correctly.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
[vladimir_zapolskiy@mentor.com: ported to v3.17]
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

same story...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

no sense having it a pointer - all instances have it pointing to
local variable in the same stack frame
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

just use it to serialize the assignment
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull MIPS fixes from Ralf Baechle:
 "This is the first round of fixes and tying up loose ends for MIPS.

   - plenty of fixes for build errors in specific obscure configurations
   - remove redundant code on the Lantiq platform
   - removal of a useless SEAD I2C driver that was causing a build issue
   - fix an earlier TLB exeption handler fix to also work on Octeon.
   - fix ISA level dependencies in FPU emulator's instruction decoding.
   - don't hardcode kernel command line in Octeon software emulator.
   - fix an earlier fix for the Loondson 2 clock setting"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: SEAD3: Fix I2C device registration.
  MIPS: SEAD3: Nuke PIC32 I2C driver.
  MIPS: ftrace: Fix a microMIPS build problem
  MIPS: MSP71xx: Fix build error
  MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
  MIPS: Prevent compiler warning from cop2_{save,restore}
  MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
  MIPS: idle: Remove leftover __pastwait symbol and its references
  MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
  MIPS: ptrace.h: Add a missing include
  MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
  MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
  MIPS: Octeon: Remove special case for simulator command line.
  MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
  MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
  pci: pci-lantiq: remove duplicate check on resource
  MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
  MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions

Pull arm64 fixes from Catalin Marinas:

 - enable 48-bit VA space now that KVM has been fixed, together with a
   couple of fixes for pgd allocation alignment and initial memblock
   current_limit.  There is still a dependency on !ARM_SMMU which needs
   to be updated as it uses the page table manipulation macros of the
   host kernel
 - eBPF fixes following changes/conflicts during the merging window
 - Compat types affecting compat_elf_prpsinfo
 - Compilation error on UP builds
 - ASLR fix when /proc/sys/kernel/randomize_va_space == 0
 - DT definitions for CLCD support on ARMv8 model platform

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix memblock current_limit with 64K pages and 48-bit VA
  arm64: ASLR: Don't randomise text when randomise_va_space == 0
  arm64: vexpress: Add CLCD support to the ARMv8 model platform
  arm64: Fix compilation error on UP builds
  Documentation/arm64/memory.txt: fix typo
  net: bpf: arm64: minor fix of type in jited
  arm64: bpf: add 'load 64-bit immediate' instruction
  arm64: bpf: add 'shift by register' instructions
  net: bpf: arm64: address randomize and write protect JIT code
  arm64: mm: Correct fixmap pagetable types
  arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
  arm64: Align less than PAGE_SIZE pgds naturally
  arm64: Allow 48-bits VA space without ARM_SMMU

Pull two sparc fixes from David Miller:

 1) Fix boots with gcc-4.9 compiled sparc64 kernels.

 2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on
    futexes used in transparent hugepage areas.

    It's really idiotic to have a weak symbolled fallback that just
    returns zero, and causes this kind of bug.  There should be no
    backup implementation and the link should fail if the architecture
    fails to provide __get_user_pages_fast() and supports transparent
    hugepages.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Implement __get_user_pages_fast().
  sparc64: Fix register corruption in top-most kernel stack frame during boot.