- 11 Feb, 2024 22 commits
-
-
Dmitry Baryshkov authored
Rather than parsing the I/O addresses from dp_parser and then passing them via a struct pointer to dp_catalog, handle I/O region parsing in dp_catalog and drop it from dp_parser. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
-
Dmitry Baryshkov authored
There is little point in going trough dp_parser->io indirection each time the driver needs to access the PHY. Store the pointer directly in dp_ctrl_private. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by:
-
Dmitry Baryshkov authored
Inline dp_catalog_aux_update_cfg() and call phy_calibrate() from dp_aux functions directly. Signed-off-by:
-
Dmitry Baryshkov authored
There is little point in sharing phy configuration structure between several modules. Move it to dp_ctrl, which becomes the only submodule re-configuring the PHY. Signed-off-by:
-
Dmitry Baryshkov authored
Split the dp_ctrl_clk_enable() beast into four functions, each of them doing just a single item: enabling or disabling core or link clocks. This allows us to cleanup the dss_module_power structure and makes several dp_ctrl functions return void. Signed-off-by:
-
Dmitry Baryshkov authored
All supported platforms use the same clocks configuration. Instead of parsing names from DT in a pretty complex manner, use the static configuration. If at some point newer (or older) platforms have different clock configuration, this clock config can be moved to the device data. Signed-off-by:
-
Dmitry Baryshkov authored
There is only a single DP_STREAM_PM clock, stream_pixel. Instead of using a separate dss_module_power instance for this single clock, handle this clock directly. This allows us to drop several wrapping functions. Signed-off-by:
-
Dmitry Baryshkov authored
The dp_power submodule is limited to handling the clocks only following previous cleanups. Fold it into the dp_ctrl submodule, removing one unnecessary level of indirection. Signed-off-by:
-
Dmitry Baryshkov authored
In preparation to cleanup of the dp_power module, inline dp_power_init() and dp_power_deinit() functions, which are now just turning the clocks on and off. Reviewed-by:
-
Dmitry Baryshkov authored
It makes little sense to split the submodule get and actual DT parsing. Call dp_parser_parse() directly from dp_parser_get(), so that the parser data is fully initialised once it is returned to the caller. Reviewed-by:
-
Dmitry Baryshkov authored
Drop unused and obsolete fields from struct dp_power_private. Reviewed-by:
-
Dmitry Baryshkov authored
Drop several unused and obsolete definitions from the dp_parser module. Signed-off-by:
-
Adam Skladowski authored
During conversion 28nm-hpm-fam-b compat got lost, add it. Signed-off-by:
Adam Skladowski <a39.skl@gmail.com> Fixes: f7d46c5e ("dt-bindings: display/msm: split qcom, mdss bindings") Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/575290/ Link: https://lore.kernel.org/r/20240121194221.13513-4-a39.skl@gmail.comSigned-off-by:
-
Adam Skladowski authored
When all dsi-ctrl compats were added msm8976 was missed, include it too. Signed-off-by:
-
Kuogee Hsieh authored
mdss_dp_test_bit_depth_to_bpc() can be replace by mdss_dp_test_bit_depth_to_bpp() / 3. Hence remove it. Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/574279/ Link: https://lore.kernel.org/r/1704993255-12753-1-git-send-email-quic_khsieh@quicinc.comSigned-off-by:
-
Kuogee Hsieh authored
At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd index and another one has an even index. Each encoder can work independently. But only two DSC encoders from same DCE can be paired to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 two consecutive DSC encoders (start with even index) have to be paired to support DSC merge mode. In addition, the DSC with even index have to be mapped to even PINGPONG index and DSC with odd index have to be mapped to odd PINGPONG index at its data path in regardless of DSC V1.1 or V1.2. This patch improves DSC allocation mechanism with consideration of those factors. Changes in V6: -- rename _dpu_rm_reserve_dsc_single to _dpu_rm_dsc_alloc -- rename _dpu_rm_reserve_dsc_pair to _dpu_rm_dsc_alloc_pair -- pass global_state to _dpu_rm_pingpong_next_index() -- remove pp_max -- fix for loop condition check at _dpu_rm_dsc_alloc() Changes in V5: -- delete dsc_id[] -- update to global_state->dsc_to_enc_id[] directly -- replace ndx with idx -- fix indentation at function declaration -- only one for loop at _dpu_rm_reserve_dsc_single() Changes in V4: -- rework commit message -- use reserved_by_other() -- add _dpu_rm_pingpong_next_index() -- revise _dpu_rm_pingpong_dsc_check() Changes in V3: -- add dpu_rm_pingpong_dsc_check() -- for pair allocation use i += 2 at for loop Changes in V2: -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and _dpu_rm_reserve_dsc_pair() Fixes: f2803ee9 ("drm/msm/disp/dpu1: Add DSC support in RM") Signed-off-by: -
Dmitry Baryshkov authored
The MSM DSI driver has dropped support for calling mdp_kms_funcs::set_split_display() callback. Drop corresponding callback from the mdp5 driver together with the rest of the infrastructure. Signed-off-by:
-
Dmitry Baryshkov authored
There is no need anymore to stop the drm_encoder instance in struct msm_dsi. Remove corresponding field. Signed-off-by:
-
Dmitry Baryshkov authored
Since the commit 8b03ad30 ("drm/msm/dsi: Use one connector for dual DSI mode"), the second DSI host in the bonded pair will not be associated with the encoder and will not get the bridges, thus making condition in msm_dsi_manager_set_split_display() always false. Technically that change broke bonded DSI support in the MDP5 driver. But since nobody complained in the last 5.5 years, it seems that nobody cares enough. Drop the msm_dsi_manager_set_split_display() completely and stop calling the set_split_display() KMS callback. Also remove the msm_dsi::external_bridge field which was only used by the mentioned function. Signed-off-by:
-
Dmitry Baryshkov authored
Since the commit 8f59ee9a ("drm/msm/dsi: Adjust probe order") the DSI hosts are not bound through the component framework if the DSI driver wasn't attached to the DSI device connected to this host. Afterwards, if there is no bridge (including the panel bridge) created for the DSI device then devm_drm_of_get_bridge() will return an error, also making msm_dsi_manager_ext_bridge_init() and thus DSI modesetting init fail. This way there can be no 'unconnected' MSM DSI bridges. Remove the msm_dsi_device_connected() function. Signed-off-by:
-
Dmitry Baryshkov authored
Since the driver was switched to devm_drm_bridge_add(), there is no need anymore to store the created bridge instance in struct msm_dsi. Drop this field and pass data directly. Signed-off-by:
-
Rob Clark authored
Merge the drm-misc tree to uprev MSM CI. Signed-off-by:Rob Clark <robdclark@chromium.org>
-
- 08 Feb, 2024 13 commits
-
-
Jani Nikula authored
All users of drm_bridge_get_edid() have been converted to use drm_bridge_edid_read(). Remove drm_bridge_get_edid(). Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/c51d50edddbe8816eaa63e6ccafa9f2354b506ba.1706038510.git.jani.nikula@intel.com
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Not ideal, should use source physical address from connector info. Signed-off-by:
-
Jani Nikula authored
If EDID read fails, clear the EDID property. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
If EDID read fails, clear the EDID property. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
If EDID read fails, clear the EDID property. Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Jani Nikula authored
Prefer using the struct drm_edid based functions. Signed-off-by:
-
Jani Nikula authored
Add new struct drm_edid based ->edid_read hook and drm_bridge_edid_read() function to call the hook. v2: Include drm/drm_edid.h Signed-off-by:
-
- 07 Feb, 2024 5 commits
-
-
Anatoliy Klymenko authored
Filter out status register against the interrupts' mask. Some events are being reported via DP status register, even if corresponding interrupts have been disabled. One instance of such event leads to generation of VBLANK when the driver is in DRM bridge mode, which in turn results in NULL pointer dereferencing. We should avoid processing such events in an interrupt handler context. This problem is less noticeable when the driver operates in DMA mode, as in this case we have DRM CRTC object instantiated and DRM framework simply discards unwanted VBLANKs in drm_handle_vblank(). Signed-off-by:
Anatoliy Klymenko <anatoliy.klymenko@amd.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Anatoliy Klymenko authored
Clear status register as soon as we read it. Addressing comments from https://lore.kernel.org/dri-devel/beb551c7-bb7e-4cd0-b166-e9aad90c4620@ideasonboard.com/Signed-off-by:
-
Anatoliy Klymenko authored
Expect external video timing in live video input mode, program DPSUB acordingly. Signed-off-by:
-
Anatoliy Klymenko authored
ZynqMP DPSUB supports 2 input modes: DMA based and live video. In the first mode, the driver implements CRTC and DP encoder DRM bridge to model the complete display pipeline. In this case, DRM bridge is being directly instantiated within the driver, not using any bridge discovery mechanisms. In the live video input mode video signal is generated by FPGA fabric and passed into DPSUB over the connected bus. In this mode driver exposes the DP encoder as a DRM bridge, expecting external CRTC to discover it via drm_of_find_panel_or_bridge() or a similar call. This discovery relies on drm_bridge.of_node being properly set. Assign device OF node to the bridge prior to registering it. This will make said bridge discoverable by an external CRTC driver. Signed-off-by:
-
Thomas Zimmermann authored
Backmerging to update drm-misc-next to the state of v6.8-rc3. Also fixes a build problem with xe. Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de>
-
