- 16 Oct, 2007 40 commits
-
-
Clemens Ladisch authored
Add a quirk to detect the Serato Scratch Live DJ Box. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
On codec chips with both audio and modem functions (e.g. Conexant one), performing AC97_RESET resets the whole registers. When both audio and modem drivers are resumed at the same time, the modem one often is resumed after the audio, and it results in the reset of audio registers (ALSA bug#3333). This patch fixes such a problem. Since the modem codec basically doesn't need AC97_RESET, skip this initialization unless specified as audio. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Some codecs need Mic Boost mixer controls for obtaining a proper recording level, but the auto-configuration doesn't create them. This patch adds the creation of mic-boost controls on corresponding codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
CS5530 is a PCI device and often shares the IRQ although the SB common routine tries to allocate it exclusively. This patch allows shared IRQ for CS5530. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Jesper Juhl authored
vmalloc() returns void *. no need to cast. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Show the actual name of CMI8762/CMI8768/CMI8769/CMI8770 chips in the card longname instead of just using 'CMI8738' for all of them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Remove the has_dual_dac variable because it was always set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Add a case for chip version 39 where no bit is set in register 0Ch, and move the detection of version 39 before that of 8768. This makes the logic more compatible with the driver on that other OS. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Unused bytes in the I/O register range are likely to have the value 0x00 instead of 0xff, so test against both values when checking for the presence of the integrated MIDI port. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fixed Dell laptops support with STAC92xx codecs. Many pin-config models are introduced. See ALSA-Configuration.txt for details. The patch taken from ALSA bug#3319, originally by Jorg Prante: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3319Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
The unsol event of ALC268 is in the standard bit 26. Also, fixed the Acer master controls, and added Extensa 5210 to the quirk list. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fixed the master mixer switch of ALC272 sony-amd model. It used a simple bind-control, but it resulted in unexpected unmute of speaker output. Now the control checks the HP jack state apropriately, just like fujitsu model. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
gcc-3.x doesn't like forward inlining: CC [M] sound/pci/hda/hda_codec.o sound/pci/hda/hda_codec.c: In function 'snd_hda_codec_free': sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available sound/pci/hda/hda_codec.c:534: sorry, unimplemented: called from here sound/pci/hda/hda_codec.c:517: sorry, unimplemented: inlining failed in call to 'free_hda_cache': function body not available sound/pci/hda/hda_codec.c:535: sorry, unimplemented: called from here Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added the PCI ID entries for known working devices - Prolink PixelView PV-M4900 - Pinnacle Studio PCTV rave Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Make sure that the MPU-401 MIDI and OPL-3 FM devices are used only on those chips where they are supported, and that the correct port addresses are used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Use the standard firmware loader for loading ICS2115 OS firmware file. This is the last old bad guy that is still using sys_open() and sys_read() calls, and now all should be gone. The patch also adds the missing description of module options related with wavefront_synth.c. Due to this rewrite, user will have to copy or make symlink the firmware file appropriately to the standard firmware path such as /lib/firmware. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added missing capture boost controls for ALC268 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Initialize card->shortname early enough so that the MIDI device can pick it up and does not need to have a generic name. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Force low speed USB MIDI devices like the ESI MIDI Mate and RomIO II to use interrupt transfers because the USB core would not be happy about low speed bulk transfers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Allow low speed MIDI devices because newer devices from ESI do not support full speed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
Allow output interrupt transfers for some MIDI devices that require them. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Some Fujitsu laptops have SPDIF output jack (ALSA bug#3009). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Krzysztof Helt authored
This patch fixes white spaces, spelling and formatting to conform closer to the coding standard of the kernel. It contains few fixes pointed out by the checkpatch.pl script. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Kailang Yang authored
1. Support Lenovo 420A (PCI SSID: 0x17aa 0x3bfc) 2. Support Haier W66 (PCI SSID: 0x1991 0x5625) Signed-off-by: Kailang Yang <kailang@realtek.com.tw> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added the black-list of probe_mask option to set the default value for known non-working devices. Currently, Thinkpad *60 and *61 series are set. I'm afraid more will be added to the list in near future... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
ALC268 has different NIDs from ALC262. Acer model should use NID 0x02 and 0x03 instead of 0x0c and 0x0d for the master volume. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
The number of mixer elements for SPDIF control don't match with the actual array size (3). This may result in a memory corruption that overwrites the i2c_capture_source field (ALSA bug#3095). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Add model=lenovo for Toshiba Satellite P205 with ALC861VD codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added the support for Macbook Pro rev3 with ALC885 codec chip. The patch taken from ALSA bug#3242. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fixed the double entries in the model presets. Toshib A135 prefers model=lenovo rather than dallas. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added auto-mute function with HP jack to Sony VAIO laptop with STAC9872 codec. The patch taken from ALSA bug#3275. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added model=targa-dig for MSI m673x with ALC883 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Avoid unnecessary work scheduling for power-off. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added unsol_event handling to ALC883 Acer Aspire codes. Also, removed unneeded channel-mode mixer control from 2-ch only presets. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Remove the superfluous code that's actually not used at all. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Fix power-management on ALC885 Intel Macs. It fixes the problem with power-saving mode, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Added model=acer for ALC268 codec support. The configuration is: headphone = 0x14, speaker = 0x15 needs hp-jack auto-detection. The same routine as alc262-fujitsu model is used. Also, added the auto-muting routine for ALC268 model=toshiba. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Dell Precision 390 needs position_fix=1 as default (ALSA bug#3295). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Clemens Ladisch authored
When CME keyboards send a SysEx message (e.g. master volume), the USB packet uses a format different from the standard format. Parsing this packet according to the specification corrupts the SysEx message itself and can cause the following MIDI messages to be misinterpreted, too. This patch adds a workaround for this case. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Use the bind-control for NID 0x1a and 0x1b as Master volume control on AD1986 model=laptop as well as model=laptop-eapd. This will fix the missing output on some devices. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
-