memblock_alloc_try_nid() returns a virtual address, however in error
case the allocated memory is incorrectly freed with memblock_phys_free().
Properly use memblock_free() instead, and pass a physical address to
uv_init() to fix this.

Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

memblock_phys_free() is used on a virtual address. Fix this by using
memblock_free().

Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

memblock_phys_free() is used on a virtual address. Fix this by using
memblock_free().

Note: this doesn't fix a bug currently, since virtual and physical
addresses are identical.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

My s390 assembly is not particularly good so I have read the history
of the reference to do_exit copy_thread and have been able to
verify that do_exit is not used.

The general argument is that s390 has been changed to use the generic
kernel_thread and kernel_execve and the generic versions do not call
do_exit.  So it is strange to see a do_exit reference sitting there.

The history of the do_exit reference in s390's version of copy_thread
seems conclusive that the do_exit reference is something that lingers
and should have been removed several years ago.

Up through 8d19f15a ("[PATCH] s390 update (1/27): arch.")  the
s390 code made a call to the exit(2) system call when a kernel thread
finished.  Then kernel_thread_starter was added which branched
directly to the value in register 11 when the kernel thread finshed.
The value in register 11 was set in kernel_thread to
"regs.gprs[11] = (unsigned long) do_exit"

In commit 37fe5d41 ("s390: fold kernel_thread_helper() into
ret_from_fork()") kernel_thread_starter was moved into entry.S and
entry64.S unchanged (except for the syntax differences between inline
assemly and in the assembly file).

In commit f9a7e025 ("s390: switch to generic kernel_thread()") the
assignment to "gprs[11]" was moved into copy_thread from the old
kernel_thread.  The helper kernel_thread_starter was still being used
and was still branching to "%r11" at the end.

In commit 30dcb099 ("s390: switch to saner kernel_execve()
semantics") kernel_thread_starter was changed to unconditionally
branch to sysc_tracenogo instead to %r11 which held the value of
do_exit.  Unfortunately copy_thread was not updated to stop passing
do_exit in "gprs[11]".

In commit 56e62a73 ("s390: convert to generic entry")
kernel_thread_starter was replaced by __ret_from_fork.  And the code
still continued to pass do_exit in "gprs[11]" despite __ret_from_fork
not caring in the slightest.

Remove this dead reference to do_exit to make it clear that s390 is
not doing anything with do_exit in copy_thread.

History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git

Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 30dcb099 ("s390: switch to saner kernel_execve() semantics")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20211208202532.16409-1-ebiederm@xmission.comSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

The address of the notification-indicator byte is an absolute
address. Therefore convert its virtual to a physical address before
being used with PQAP(AQIC).

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

After adding the missing __va()/__pa() calls to the base asce
functions there are even more casts in the code than before. Make the
code more readable by passing and using pointers to page tables,
instead of using unsigned values for the same purpose.

This allows to get rid of nearly all casts within the code.
Suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The base asce functions create/free page tables open-coded to make
sure that the returned asce and page tables do not make use of any
enhanced DAT features like e.g. large pages. This is required for some
I/O functions that use an asce, like e.g. some service call requests.

Handling of virtual vs physical addresses is missing; therefore add
that now.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

diag10_range() expects a pfn, however the current cmm code is shifting
a virtual address, instead of a physical address by PAGE_SHIFT bits,
which would give a wrong result in case if V!=R.

Use virt_to_pfn() to fix this.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Use pfn_to_phys() instead of open coding to make it
clear what the code is doing.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The page table dumper walks page table tables without using standard
page table primitives in order to also dump broken entries. However it
currently does not translate physical to virtual addresses before
dereferencing them. Therefore add this missing translation.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

This patch adds a sysfs 'status' attribute to a queue device when it is
bound to the vfio_ap device driver. The field displays a string indicating
the status of the queue device:

Status String:  Indicates:
-------------   ---------
"assigned"      the queue is assigned to an mdev, but is not in use by a
                KVM guest.
"in use"        the queue is assigned to an mdev and is in use by a KVM
                guest.
"unassigned"    the queue is not assigned to an mdev.

The status string will be displayed by the 'lszcrypt' command if the queue
device is bound to the vfio_ap device driver.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
[akrowiak@linux.ibm.com: added check for queue in use by guest]
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Add missing __pa/__va address conversion of machine check extended
save area designation, which is an absolute address.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reported-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

qib.isliba and qib.osliba are actually logical addresses, and this is
also how the relevant code sets up these fields. Fix up the
documentation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

All callers of set_buf_states() are already making sure that 'count'
is not 0. So don't check it an additional time.

Note that our own code also doesn't _require_ the count to be sane
(ie. we can't overrun an array or similar). So worst case HW would
simply reject the SQBS operation and report an error.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The entries in the DMA translation tables for our IOMMU must specify
physical addresses of either the next level table or the final page
to be mapped for DMA. Currently however the code simply passes the
virtual addresses of both. On the other hand we still need to walk the
tables via their virtual addresses so we need to do a phys_to_virt()
when setting the entries and a virt_to_phys() when getting them.
Similarly when passing the I/O translation anchor to the hardware we
must also specify its physical address.

As the DMA and IOMMU APIs we are implementing already use the correct
phys_addr_t type for the address to be mapped let's also thread this
through instead of treating it as just an unsigned long.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The adapter and directed interrupt bit vectors need to be referenced in
the FIB with their physical not their virtual address. So use
virt_to_phys() as approrpiate.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fix wrong usage of page_to_phys/phys_to_page.

Note: this currently doesn't fix a real bug, since virtual addresses
are indentical to physical ones.
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The callers know what type of queue they want to work with. Introduce
type-specific variants to add buffers on an {Input,Output} queue, so
that we can avoid some function parameters and the de-muxing into
type-specific hot paths.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The callers know what type of queue they want to inspect. Introduce
type-specific variants to inspect an {Input,Output} queue, so that we
can avoid one function parameter and some conditional branches in the
hot paths.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

qdio_handle_activate_check() tries to re-use one of the queue-specific
handlers to report that the ACTIVATE ccw has been terminated. But the
logic to select that handler is overly complex - in practice both
qdio drivers have at least one Input Queue, so we never take the other
paths.

Make things more obvious by removing this unused code, and clearly
spelling out that we re-use the Input Handler for generic error
reporting. This also paves the way for a world without queue-specific
error handlers.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

qdio_handle_activate_check() re-uses a queue-specific handler to report
that the ACTIVATE ccw has been terminated. It uses either the first
input or output queue, so we can hard-code q->nr as 0. Also don't
access the q->irq_ptr parent pointer, we already have a pointer to
the qdio_irq.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

The qdio_irq contains only two fields that are directly exposed to the
HW (ccw and qib). And only the ccw needs to reside in 31-bit memory. So
allocate it separately, and remove the GFP_DMA constraint from the
qdio_irq allocation.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Fetch the individual CIWs when we actually need them, rather than
fetching both of them in qdio_setup_irq() and then needing to cache
them inside the qdio_irq.

Also deal with the error when a CIW is not available, instead of
silently dropping this error condition in qdio_setup_irq()'s caller.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

It's unused, and duplicates sizeof(struct qdio_buffer).
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

commit fa1a8c23 ("s390: cio: Delay uevents for subchannels")
introduced suppression of uevents for a subchannel until after it is
clear that the subchannel would not be unregistered again
immediately. This was done to avoid uevents being generated for I/O
subchannels with no valid device, which can happen on LPAR.

However, this also has some drawbacks: All subchannel drivers need to
manually remove the uevent suppression and generate an ADD uevent as
soon as they are sure that the subchannel will stay around. This misses
out on all uevents that are not the initial ADD uevent that would be
generated while uevents are suppressed; for example, all subchannels
were missing the BIND uevent.

As uevents being generated even for I/O subchannels without an
operational device turned out to be not as bad as missing uevents and
complicating the code flow, let's remove uevent suppression for
subchannels.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
[cohuck@redhat.com: modified changelog]
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Link: https://lore.kernel.org/r/20211122103756.352463-2-vneethv@linux.ibm.comSigned-off-by: Heiko Carstens <hca@linux.ibm.com>

Add an implementation of the ChaCha20 stream cipher (see e.g. RFC 7539)
that makes use of z13's vector instruction set extension.

The original implementation is by Andy Polyakov which is
adapted for kernel use.

Four to six blocks are processed in parallel resulting in a performance
gain for inputs >= 256 bytes.

chacha20-generic

1 operation in 622 cycles (256 bytes)
1 operation in 2346 cycles (1024 bytes)

chacha20-s390

1 operation in 218 cycles (256 bytes)
1 operation in 647 cycles (1024 bytes)

Cc: Andy Polyakov <appro@openssl.org>
Reviewed-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>

Pull parisc fixes from Helge Deller:
 "Some bug and warning fixes:

   - Fix "make install" to use debians "installkernel" script which is
     now in /usr/sbin

   - Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
     file name

   - Fix compiler warnings by annotating parisc agp init functions with
     __init

   - Fix timekeeping on SMP machines with dual-core CPUs

   - Enable some more config options in the 64-bit defconfig"

* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Mark cr16 CPU clocksource unstable on all SMP machines
  parisc: Fix "make install" on newer debian releases
  parisc/agp: Annotate parisc agp init functions with __init
  parisc: Enable sata sil, audit and usb support on 64-bit defconfig
  parisc: Fix KBUILD_IMAGE for self-extracting kernel

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for a few reported issues. Included in
  here are:

   - xhci fix for a _much_ reported regression. I don't think there's a
     community distro that has not reported this problem yet :(

   - new USB quirk addition

   - cdns3 minor fixes

   - typec regression fix.

  All of these have been in linux-next with no reported problems, and
  the xhci fix has been reported by many to resolve their reported
  problem"

* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
  usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
  usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
  USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
  xhci: Fix commad ring abort, write all 64 bits to CRCR register.

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes for 5.16-rc4 to
  resolve a number of reported problems.

  They include:

   - liteuart serial driver fixes

   - 8250_pci serial driver fixes for pericom devices

   - 8250 RTS line control fix while in RS-485 mode

   - tegra serial driver fix

   - msm_serial driver fix

   - pl011 serial driver new id

   - fsl_lpuart revert of broken change

   - 8250_bcm7271 serial driver fix

   - MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1

   - vgacon fix for reported problem

  All of these, except for the 8250_bcm7271 fix have been in linux-next
  with no reported problem. The 8250_bcm7271 fix was added to the tree
  on Friday so no chance to be linux-next yet. But it should be fine as
  the affected developers submitted it"

* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_bcm7271: UART errors after resuming from S2
  serial: 8250_pci: rewrite pericom_do_set_divisor()
  serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
  serial: 8250: Fix RTS modem control while in rs485 mode
  Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
  serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
  serial: liteuart: relax compile-test dependencies
  serial: liteuart: fix minor-number leak on probe errors
  serial: liteuart: fix use-after-free and memleak on unbind
  serial: liteuart: Fix NULL pointer dereference in ->remove()
  vgacon: Propagate console boot parameters before calling `vc_resize'
  tty: serial: msm_serial: Deactivate RX DMA for polling support
  serial: pl011: Add ACPI SBSA UART match id
  serial: core: fix transmit-buffer reset and memleak
  MAINTAINERS: Add rpmsg tty driver maintainer

Pull timer fix from Borislav Petkov:

 - Prevent a tick storm when a dedicated timekeeper CPU in nohz_full
   mode runs for prolonged periods with interrupts disabled and ends up
   programming the next tick in the past, leading to that storm

* tag 'timers_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/nohz: Last resort update jiffies on nohz_full IRQ entry

Pull scheduler fixes from Borislav Petkov:

 - Properly init uclamp_flags of a runqueue, on first enqueuing

 - Fix preempt= callback return values

 - Correct utime/stime resource usage reporting on nohz_full to return
   the proper times instead of shorter ones

* tag 'sched_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Fix rq->uclamp_max not set on first enqueue
  preempt/dynamic: Fix setup_preempt_mode() return value
  sched/cputime: Fix getrusage(RUSAGE_THREAD) with nohz_full

Pull x86 fixes from Borislav Petkov:

 - Fix a couple of SWAPGS fencing issues in the x86 entry code

 - Use the proper operand types in __{get,put}_user() to prevent
   truncation in SEV-ES string io

 - Make sure the kernel mappings are present in trampoline_pgd in order
   to prevent any potential accesses to unmapped memory after switching
   to it

 - Fix a trivial list corruption in objtool's pv_ops validation

 - Disable the clocksource watchdog for TSC on platforms which claim
   that the TSC is constant, doesn't stop in sleep states, CPU has TSC
   adjust and the number of sockets of the platform are max 2, to
   prevent erroneous markings of the TSC as unstable.

 - Make sure TSC adjust is always checked not only when going idle

 - Prevent a stack leak by initializing struct _fpx_sw_bytes properly in
   the FPU code

 - Fix INTEL_FAM6_RAPTORLAKE define naming to adhere to the convention

* tag 'x86_urgent_for_v5.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/xen: Add xenpv_restore_regs_and_return_to_usermode()
  x86/entry: Use the correct fence macro after swapgs in kernel CR3
  x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()
  x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword
  x86/64/mm: Map all kernel memory into trampoline_pgd
  objtool: Fix pv_ops noinstr validation
  x86/tsc: Disable clocksource watchdog for TSC on qualified platorms
  x86/tsc: Add a timer to make sure TSC_adjust is always checked
  x86/fpu/signal: Initialize sw_bytes in save_xstate_epilog()
  x86/cpu: Drop spurious underscore from RAPTOR_LAKE #define

Pull more kvm fixes from Paolo Bonzini:

 - Static analysis fix

 - New SEV-ES protocol for communicating invalid VMGEXIT requests

 - Ensure APICv is considered inactive if there is no APIC

 - Fix reserved bits for AMD PerfEvtSeln register

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Do not terminate SEV-ES guests on GHCB validation failure
  KVM: SEV: Fall back to vmalloc for SEV-ES scratch area if necessary
  KVM: SEV: Return appropriate error codes if SEV-ES scratch setup fails
  KVM: x86/mmu: Retry page fault if root is invalidated by memslot update
  KVM: VMX: Set failure code in prepare_vmcs02()
  KVM: ensure APICv is considered inactive if there is no APIC
  KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register

Currently, an SEV-ES guest is terminated if the validation of the VMGEXIT
exit code or exit parameters fails.

The VMGEXIT instruction can be issued from userspace, even though
userspace (likely) can't update the GHCB. To prevent userspace from being
able to kill the guest, return an error through the GHCB when validation
fails rather than terminating the guest. For cases where the GHCB can't be
updated (e.g. the GHCB can't be mapped, etc.), just return back to the
guest.

The new error codes are documented in the lasest update to the GHCB
specification.

Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <b57280b5562893e2616257ac9c2d4525a9aeeb42.1638471124.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use kvzalloc() to allocate KVM's buffer for SEV-ES's GHCB scratch area so
that KVM falls back to __vmalloc() if physically contiguous memory isn't
available.  The buffer is purely a KVM software construct, i.e. there's
no need for it to be physically contiguous.

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Return appropriate error codes if setting up the GHCB scratch area for an
SEV-ES guest fails.  In particular, returning -EINVAL instead of -ENOMEM
when allocating the kernel buffer could be confusing as userspace would
likely suspect a guest issue.

Fixes: 8f423a80 ("KVM: SVM: Support MMIO for an SEV-ES guest")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109222350.2266045-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull xfs fix from Darrick Wong:
 "Remove an unnecessary (and backwards) rename flags check that
  duplicates a VFS level check"

* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove incorrect ASSERT in xfs_rename

Pull cifs fixes from Steve French:
 "Three SMB3 multichannel/fscache fixes and a DFS fix.

  In testing multichannel reconnect scenarios recently various problems
  with the cifs.ko implementation of fscache were found (e.g. incorrect
  initialization of fscache cookies in some cases)"

* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: avoid use of dstaddr as key for fscache client cookie
  cifs: add server conn_id to fscache client cookie
  cifs: wait for tcon resource_id before getting fscache super
  cifs: fix missed refcounting of ipc tcon

In commit c8c37359 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour.  On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c37359 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+