- 09 Oct, 2023 22 commits
-
-
Igor Grinberg authored
The soft reset has transitioned to CPUCP packet instead of plain register write and is about to be removed from the struct cpu_dyn_regs. As a preparation for removing the gic_host_soft_rst_irq field from struct cpu_dyn_regs, switch to use the plain macro - this keeps the backward compatibility. Signed-off-by:
Igor Grinberg <igrinberg@habana.ai> Reviewed-by:
Oded Gabbay <ogabbay@kernel.org> Signed-off-by:
-
Ofir Bitton authored
As TPC kernels now must use those registers we unsecure them. Signed-off-by:
Ofir Bitton <obitton@habana.ai> Reviewed-by:
-
Tomer Tayar authored
The F/W dynamically allocates one of the PSOC scratchpad registers for the engine cores, so they can raise events towards the F/W. To allow the engine cores to access this register, this register must be non-secured. Signed-off-by:
Tomer Tayar <ttayar@habana.ai> Reviewed-by:
-
Juerg Haefliger authored
The module loads firmware so add MODULE_FIRMWARE macros to provide that information via modinfo. Signed-off-by:
Juerg Haefliger <juerg.haefliger@canonical.com> Reviewed-by:
-
Ivan Orlov authored
Now that the driver core allows for struct class to be in read-only memory, move the accel_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: dri-devel@lists.freedesktop.org Suggested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by:
-
Ofir Bitton authored
Add dump of an error reported from f/w during boot time. This error indicates a failure with setting temperature threshold. Signed-off-by:
-
Oded Gabbay authored
If scrubbing memory after user released device has failed it means the device is in a bad state and should be reset. Signed-off-by:
-
Oded Gabbay authored
Our simulator supports idle check so no need anymore to check if pdev exists. Signed-off-by:
-
farah kassabri authored
When the driver needs to abort waiters for interrupts, for cases such as critical events that occur and driver need to do hard reset, in such scenario the driver will complete the fence to wake up the waiting thread, and will set the fence error indication. The return value of the completion API will be greater than 0 since it will return the timeout, but as this indicates successful completion, the driver should mark it as aborted. Signed-off-by:
farah kassabri <fkassabri@habana.ai> Reviewed-by:
-
farah kassabri authored
Protect against concurrency of user requesting to register a timestamp offset (where the driver fills the timestamp when the command submission has finished executing) to a specific user interrupt ID. The protection is basically to allow only one timestamp registration request to be handled at a time. This is needed because the user can decide to re-use a timestamp offset (register an already registered offset, to a different interrupt ID). This means the request will cause the timestamp node to move from one interrupt list to another interrupt list. In such scenario, without proper protection, we could end up adding the same node twice to the interrupts wait lists. Signed-off-by:
-
Koby Elbaz authored
Every time an FD is returned to the user, the driver adds a corresponding private structure to the list. Yet, it's still a list of private structures rather than of FDs. Remove, as well, an unnecessary comment. Signed-off-by:
Koby Elbaz <kelbaz@habana.ai> Reviewed-by:
-
Koby Elbaz authored
Because we might still be using related resources, decrementing PID's reference count should be done at later stages of the device release. A good place is right after the representing private structure is removed from LKD's list. Signed-off-by:
-
Koby Elbaz authored
As part of driver teardown, we attempt to kill all user processes. It shouldn't fail, but if it does we want to print the error code that the kapi returned to us. Signed-off-by:
-
farah kassabri authored
The preboot used to statically allocate memory for the comms descriptor on the device memory when driver requested the descriptor information. Now preboot moved to dynamic memory allocation where it wants to check the size the driver expects vs. what the f/w expects. Note there are no backward compatibility issues as older f/w versions simply ignore this value. Signed-off-by:
-
Dani Liberman authored
Implement razwi handling for arc farm and add it to arc farm sei event handler. Signed-off-by:
Dani Liberman <dliberman@habana.ai> Reviewed-by:
-
Ofir Bitton authored
Because in this case we have only a single possible cause, we can safely stop fetching the cause from firmware. Signed-off-by:
-
Koby Elbaz authored
hl_device_status() returns the status of an acquired device. If a device is going down (following an rmmod cmd), it should be marked as an unusable/malfunctioning device, and hence should not be acquired. However, since this was not the case so far (i.e., a device going down would inaccurately return 'in reset' status allowing the user to acquire the device) it introduced a bug where as part of a reset flow, the driver could not kill processes that have not run yet, and since those processes aren't blocked from reacquiring a device, we get eventually a new flow of a driver attempting to kill all processes in a list that can't be ever really empty. Signed-off-by:
-
Tomer Tayar authored
It is useful for debug to know which user process have acquired the device. Add this info to the relevant debug print, in addition to the already printed user context's ASID. Signed-off-by:
-
Tomer Tayar authored
When an ioctl fails, it is useful to know what is the task command name and the full ioctl request code, in addition to the task pid and the ioctl number. Add the additional information to the relevant debug error prints. Signed-off-by:
-
Ofir Bitton authored
In order for user to be aware of undefined opcode events, we must store all relevant information and notify user about the failure. The user will fetch the stored info via info ioctl. Signed-off-by:
-
Tomer Tayar authored
If hl_device_cond_reset() is called while a reset is already pending but hasn't started, the reset request will be dropped. If the flags of the new request are more severe, e.g. a hard reset while the pending reset is a compute reset, the eventual reset won't be suitable for the device status. To prevent such cases, update the pending reset flags with the new requests flags before the requests are dropped. Signed-off-by:
-
Tomer Tayar authored
When a H/W event is received while a user is registered to events, no immediate hard reset will happen, and instead the user will be notified and will have some time to handle it and eventually release the device, after which the reset will be done. If a user, as part of the handling and as part of the cleanup steps towards releasing the device, unregisters from receiving those events, and at that time an adjacent H/W event is received, it will be assumed that the user is not registered to events and thus an immediate hard reset is required. To prevent such an unwanted immediate reset, modify the driver to perform it if the user is not registered to events AND we don't already have a pending reset for a previous H/W event. Signed-off-by:
-
- 04 Oct, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull for v6.7: Features and functionality: - Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo, Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi) - Plenty of various DSC improvements and fixes (Ankit) - Add DSC PPS state readout and verification (Suraj) - Improve fastsets for VRR, LRR and M/N updates (Ville) - Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville) - Various DSB improvements, load LUTs using DSB (Ville) - Improve shared link bandwidth management, starting with FDI (Imre) - Optimize get param ioctl for PXP status (Alan) - Remove DG2 pre-production hardware workarounds (Matt) - Add more RPL P/U PCI IDs (Dnyaneshwar) - Add new DG2-G12 stepping (Swati) - Add PSR sink error status to debugfs (Jouni) - Add DP enhanced framing to crtc state checker (Ville) Refactoring and cleanups: - Simplify TileY/Tile4 tiling selftest enumeration (Matt) - Remove some unused power domain code (Gustavo) - Check stepping of display IP version rather than MTL platform (Matt) - DP audio compute config cleanups (Vinod) - SDVO cleanups and refactoring, more robust failure handling (Ville) - Color register definition and readout cleanups (Jani) - Reduce header interdependencies for frontbuffer tracking (Jani) - Continue replacing struct edid with struct drm_edid (Jani) - Use source physical address instead of EDID for CEC (Jani) - Clean up Type-C port lane count functions (Luca) - Clean up DSC PPS register definitions and readout (Jani) - Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani) - Move more of the display probe to display code (Jani) - Remove redundant runtime suspended state flag (Jouni) - Move display info printing to display code (Balasubramani) - Frontbuffer tracking improvements (Jouni) - Add trailing newlines to debug logging (Jim Cromie) - Separate display workarounds from clock gating init (Matt) - Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre) Fixes: - Fix hotplug poll detect loops via suspend/resume (Imre) - Fix hotplug detect for forced connectors (Imre) - Fix DSC first_line_bpg_offset calculation (Suraj) - Fix debug prints for SDP CRC16 (Arun) - Fix PXP runtime resume (Alan) - Fix cx0 PHY lane handling (Gustavo) - Fix frontbuffer tracking locking in debugfs (Juha-Pekka) - Fix SDVO detect on some models (Ville) - Fix SDP split configuration for DP MST (Vinod) - Fix AUX usage and reads for HDCP on DP MST (Suraj) - Fix PSR workaround (Jouni) - Fix redundant AUX power get/put in DP force (Imre) - Fix ICL DSI TCLK POST by letting hardware handle it (William) - Fix IRQ reset for XE LP+ (Gustavo) - Fix h/vsync_end instead of h/vtotal in VBT (Ville) - Fix C20 PHY msgbus timeout issues (Gustavo) - Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville) - Fix FEC state readout for DP MST (Ville) DRM subsystem core changes: - Assume sink supports 8 bpc when DSC is supported (Ankit) - Add drm_edid_is_digital() helper (Jani) - Parse source physical address from EDID (Jani) - Add function to attach CEC without EDID (Jani) - Reorder connector sysfs/debugfs remove (Ville) - Register connector sysfs ddc symlink later (Ville) Media subsystem changes: - Add comments about CEC source physical address usage (Jani) Merges: - Backmerge drm-next to get v6.6-rc1 (Jani) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com
-
- 02 Oct, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: Fixes/improvements/new stuff: - Fix TLB-Invalidation seqno store [mtl] (Alan Previn) - Force a reset on internal GuC error [guc] (John Harrison) - Define GSC fw [gsc] (Daniele Ceraolo Spurio) - Update workaround 14016712196 [dg2/mtl] (Tejas Upadhyay) - Mark requests for GuC virtual engines to avoid use-after-free (Andrzej Hajda) - Add Wa_14015150844 [dg2/mtl] (Shekhar Chauhan) - Prevent error pointer dereference (Dan Carpenter) - Add Wa_18022495364 [tgl,adl,rpl] (Dnyaneshwar Bhadane) - Fix GuC PMU by moving execlist stats initialization to execlist specific setup (Umesh Nerlige Ramappa) - Fix PXP firmware load [pxp/mtl] (Alan Previn) - Fix execution/context state of PXP contexts (Alan Previn) - Limit the length of an sg list to the requested length (Matthew Wilcox) - Fix reservation address in ggtt_reserve_guc_top [guc] (Javier Pello) - Add Wa_18028616096 [dg2] (Shekhar Chauhan) - Get runtime pm in busyness worker only if already active [guc/pmu] (Umesh Nerlige Ramappa) - Don't set PIPE_CONTROL_FLUSH_L3 for aux inval (Nirmoy Das) Future platform enablement: - Fix and consolidate some workaround checks, make others IP version based [mtl] (Matt Roper) - Replace Meteorlake subplatforms with IP version checks (Matt Roper) - Adding DeviceID for Arrowlake-S under MTL [mtl] (Nemesa Garg) - Run relevant bits of debugfs drop_caches per GT (Tvrtko Ursulin) Miscellaneous: - Remove Wa_15010599737 [dg2] (Shekhar Chauhan) - Align igt_spinner_create_request with hangcheck [selftests] (Jonathan Cavitt) - Remove pre-production workarounds [dg2] (Matt Roper) - Tidy some workaround definitions (Matt Roper) - Wait longer for tasks in migrate selftest [gt] (Jonathan Cavitt) - Skip WA verification for GEN7_MISCCPCTL on DG2 [gt] (Andrzej Hajda) - Silence injected failure in the load via GSC path [huc] (Daniele Ceraolo Spurio) - Refactor deprecated strncpy (Justin Stitt) - Update RC6 mask for mtl_drpc [debugfs/mtl] (Badal Nilawar) - Remove a static inline that requires including i915_drv.h [gt] (Jani Nikula) - Remove inlines from i915_gem_execbuffer.c [gem] (Jani Nikula) - Remove gtt_offset from stream->oa_buffer.head/.tail [perf] (Ashutosh Dixit) - Do not disable preemption for resets (Tvrtko Ursulin) Signed-off-by:
-
- 29 Sep, 2023 2 commits
-
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jouni Högander authored
i915_gem_object_set_frontbuffer returns set frontbuffer pointer. When we are releasing frontbuffer we are clearing the pointer from the object. Warn on if return value is not null. v3: Check i915_gem_object_set_frontbuffer return value separately v2: Instead of ignoring do drm_WARN_ON Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
-
- 28 Sep, 2023 13 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.7-rc1: UAPI Changes: - drm_file owner is now updated during use, in the case of a drm fd opened by the display server for a client, the correct owner is displayed. - Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo recycling. Cross-subsystem Changes: - Disable boot logo for au1200fb, mmpfb and unexport logo helpers. Only fbcon should manage display of logo. - Update freescale in MAINTAINERS. - Add some bridge files to bridge in MAINTAINERS. - Update gma500 driver repo in MAINTAINERS to point to drm-misc. Core Changes: - Move size computations to drm buddy allocator. - Make drm_atomic_helper_shutdown(NULL) a nop. - Assorted small fixes in drm_debugfs, DP-MST payload addition error handling. - Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling. - Handle bad (h/v)sync_end in EDID by clipping to htotal. - Build GPUVM as a module. Driver Changes: - Simple drivers don't need to cache prepared result. - Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot more drm drivers. - Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic, nouveau, tc358768. - Add NV12 for komeda writeback. - Add arbitration lost event to synopsis/dw-hdmi-cec. - Speed up s/r in nouveau by not restoring some big bo's. - Assorted nouveau display rework in preparation for GSP-RM, especially related to how the modeset sequence works and the DP sequence in relation to link training. - Update anx7816 panel. - Support NVSYNC and NHSYNC in tegra. - Allow multiple power domains in simple driver. Signed-off-by:
-
Imre Deak authored
Recompute the state of all CRTCs on an FDI link during a modeset that may be affected by the modeset of other CRTCs on the same link. This ensures that each CRTC on the link maximizes its BW use (after another CRTC is disabled). In practice this means recomputing pipe B's config on IVB if pipe C gets disabled. v2: - Add the change recomputing affected CRTC states in a separate patch. (Ville) v3: (Ville) - Constify old and new crtc states. - Check for fused off pipe C. - Fix new vs. old crtc state mixup. - Drop check for pipe C's enabled state. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
-
Imre Deak authored
At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI lanes. Make the BW sharing more dynamic by trying to reduce pipe B's link bpp in this case, until pipe B uses only up to 2 FDI lanes. For this instead of the encoder compute config retry loop - which reduced link bpp only for the encoder's pipe - reduce the maximum link bpp for pipe B/C as required after all CRTC states are computed and recompute the CRTC states with the new bpp limit. Atm, all FDI encoder's compute config function returns an error if a BW constrain prevents increasing the pipe bpp value. The corresponding crtc_state->bw_constrained check can be replaced with checking crtc_state->max_link_bpp_x16, add TODO comments for this. SDVO is an exception where this case is only handled in the outer config retry loop, failing the modeset with a WARN, add a FIXME comment to handle this in the encoder code similarly to other encoders. v2: - Don't assume that a CRTC is already in the atomic state, while reducing its link bpp. - Add DocBook description to intel_fdi_atomic_check_link(). v3: - Enable BW management for FDI links in a separate patch. (Ville) v4: (Ville) - Fail the SDVO encoder config computation if it doesn't support the link bpp limit. - Add TODO: comments about checking link_bpp_x16 instead of bw_constrained. v5: - Replace link bpp limit check with a FIXME: comment in intel_sdvo_compute_config(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
At the moment a modeset fails if the config computation of a pipe can't fit its required BW to the available link BW even though the limitation may be resolved by reducing the BW requirement of other pipes. To improve the above this patch adds helper functions checking the overall BW limits after all CRTC states have been computed. If the check fails the maximum link bpp for a selected pipe will be reduced and all the CRTC states will be recomputed until either the overall BW limit check passes, or further bpp reduction is not possible (because all pipes/encoders sharing the link BW reached their minimum link bpp). Atm, the MST encoder allocates twice the required BW for YUV420 format streams. A follow-up patchset will fix that, add a code comment about this. This change prepares for upcoming patches enabling the above BW management on FDI and MST links. v2: - Rename intel_crtc_state::max_link_bpp to max_link_bpp_x16 and intel_link_bw_limits::max_bpp to max_bpp_x16. (Jani) v3: - Add the helper functions in a separate patch. (Ville) - Add the functions to intel_link_bw.c instead of intel_atomic.c (Ville) - Return -ENOSPC instead of -EINVAL to userspace in case of a link BW limit failure. v4: - Make intel_atomic_check_config() static. v5: (Ville) - Rename intel_link_bw_limits::min_bpp_pipes to min_bpp_reached_pipes and intel_link_bw_reset_pipe_limit_to_min() to intel_link_bw_set_min_bpp_for_pipe(). - Rename pipe_bpp to link_bpp in intel_link_bw_reduce_bpp(). - Add FIXME: comment about MST encoder's YUV420 BW allocation and tracking the link bpp limit accordingly. v6: - Move intel_link_bw_compute_pipe_bpp() to intel_fdi.c (Ville) - WARN_ON(BIT(pipe) & min_bpp_reached_pipes) in intel_link_bw_set_bpp_limit_for_pipe(). (Ville) - Rename intel_link_bw_set_min_bpp_for_pipe() to intel_link_bw_set_bpp_limit_for_pipe() and intel_link_bw_limits::min_bpp_reached_pipes to bpp_limit_reached_pipes. (Ville) - Remove unused header includes. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Factor out intel_atomic_check_config() to check and compute all the CRTC states. This will be used by a follow up patch to recompute/check the state until required by BW limitations between CRTCs. Reviewed-by:
-
Imre Deak authored
Rename intel_modeset_all_pipes() to intel_modeset_all_pipes_late() to clarify when the function can be called (vs. intel_modeset_pipes_in_mask_early()). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Add intel_modeset_pipes_in_mask_early() to modeset a provided set of pipes, used in a follow-up patch. As opposed to intel_modeset_all_pipes() which modesets only the active pipes - others don't requiring programming the HW - modeset all enabled pipes in intel_modeset_pipes_in_mask_early() which may need to recompute their state even if they are not active (that is in the DPMS off state). While at it add DocBook descriptions for the two exported functions. v2: - Add a flag controlling if active planes are force updated as well. - Add DockBook descriptions. v3: - For clarity use _early/_late suffixes for the exported functions instead of the update_active_planes parameter. (Ville) v4: - In intel_modeset_pipes_in_mask_early() update only the crtc flags relevant to the early phase. (Ville) - Rename intel_modeset_all_pipes() in a separate patch. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Limit the output link bpp in DSC mode to the link_config_limits link.min_bpp_x16 .. max_bpp_x16 range the same way it's done in non-DSC mode. Atm this doesn't make a difference, the link bpp range being 0 .. max pipe bpp, but a follow-up patch will need a way to reduce max link bpp below its current value. v2: - Add to_bpp_int_roundup() instead of open coding it. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
-
Imre Deak authored
In non-DSC mode the link bpp can be set in 2*3 bpp steps in the pipe bpp range, while in DSC mode it can be set in 1/16 bpp steps to any value up to the maximum pipe bpp. Update the limits accordingly in both modes to prepare for a follow-up patch which may need to reduce the max link bpp value and starts to check the link bpp limits in DSC mode as well. While at it add more detail to the link limit debug print and print it also for DSC mode. v2: - Add to_bpp_frac_dec() instead of open coding it. (Jani) v3: (Ville) - Add BPP_X16_FMT / BPP_X16_ARG. - Add TODO: comment about initializing the DSC link bpp limits earlier. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Imre Deak authored
Computing the non-DSC mode link config is redundant once it's determined that DSC will be needed, so skip computing it. In a follow-up patch this simplifies setting the link limits which are dependent on the DSC vs. non-DSC mode. While at it sanitize the debug print about the MST DSC fallback path, making it similar to the SST DSC one. Reviewed-by:
-
Imre Deak authored
A follow-up patch will need to limit the output link bpp both in the non-DSC and DSC configuration, so track the pipe and link bpp limits separately in the link_config_limits struct. Use .4 fixed point format for link bpp matching the 1/16 bpp granularity in DSC mode and for now keep this limit matching the pipe bpp limit. v2: (Jani) - Add to_bpp_int(), to_bpp_x16() helpers instead of opencoding them. - Rename link_config_limits::link.min/max_bpp to min/max_bpp_x16. Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Reviewed-by:
-
Imre Deak authored
Factor out helpers that DP / DP_MST encoders can use to compute the link rate/lane count and bpp limits. A follow-up patch will call these to recalculate the limits if DSC compression is required. Reviewed-by:
-
Nirmoy Das authored
PIPE_CONTROL_FLUSH_L3 is not needed for aux invalidation so don't set that. Fixes: ad8ebf12 ("drm/i915/gt: Ensure memory quiesced before invalidation") Cc: Jonathan Cavitt <jonathan.cavitt@intel.com> Cc: Andi Shyti <andi.shyti@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.8+ Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Tejas Upadhyay <tejas.upadhyay@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Tapani Pälli <tapani.palli@intel.com> Cc: Mark Janes <mark.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Acked-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Tested-by:
Tapani Pälli <tapani.palli@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230926142401.25687-1-nirmoy.das@intel.com
-
- 27 Sep, 2023 1 commit
-
-
Ville Syrjälä authored
Normally we could be in a deep PkgC state all the way up to the point when DSB starts its execution at the transcoders undelayed vblank. The DSB will then have to wait for the hardware to wake up before it can execute anything. This will waste a huge chunk of the vblank time just waiting, and risks the DSB execution spilling into the vertical active period. That will be very bad, especially when programming the LUTs as the anti-collision logic will cause DSB to corrupt LUT writes during vertical active. To avoid these problems we can instruct the DSB to pre-wake the display engine on a specific scanline so that everything will be 100% ready to go when we hit the transcoder's undelayed vblank. One annoyance is that the scanline is specified as just that, a single scanline. So if we happen to start the DSB execution after passing said scanline no DEwake will happen and we may drop back into some PkgC state before reaching the transcoder's undelayed vblank. To prevent that we'll use the "force DEwake" bit to manually force the display engine to stay awake. We'll then have to clear the force bit again after the DSB is done (the force bit remains effective even when the DSB is otherwise disabled). Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
