- 14 Dec, 2018 9 commits
-
-
Yong Zhi authored
This adds coeff, config parameters etc const definitions for IPU3 programming. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Yong Zhi authored
Introduce functions to load and install ImgU FW blobs. Signed-off-by:
-
Yong Zhi authored
The pools are used to store previous parameters set by user with the parameter queue. Due to pipelining, there needs to be multiple sets (up to four) of parameters which are queued in a host-to-sp queue. [mchehab@kernel.org: fixed two minor issues on comments: a space before tab and a typo: "vaid" -> "valid"] Signed-off-by:
-
Tomasz Figa authored
This driver uses IOVA space for buffer mapping through IPU3 MMU to transfer data between imaging pipelines and system DDR. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Tomasz Figa authored
This driver translates IO virtual address to physical address based on two levels page tables. Signed-off-by:
-
Yong Zhi authored
This add all the structs of IPU3 firmware ABI. Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Yong Zhi authored
Add macros and enums used for IPU3 firmware interface. Signed-off-by:
-
Sakari Ailus authored
Document the interface for metadata output, including V4L2_BUF_TYPE_META_OUTPUT buffer type and V4L2_CAP_META_OUTPUT capability bits. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Tian Shu Qiu <tian.shu.qiu@intel.com> Signed-off-by:
-
Sakari Ailus authored
The V4L2_BUF_TYPE_META_OUTPUT mirrors the V4L2_BUF_TYPE_META_CAPTURE with the exception that it is an OUTPUT type. The use case for this is to pass buffers to the device that are not image data but metadata. The formats, just as the metadata capture formats, are typically device specific and highly structured. Signed-off-by:
-
- 12 Dec, 2018 3 commits
-
-
Ondrej Jirman authored
When parallel bus is used and data-active is being parsed, incorrect flags are cleared. Clear the correct flag bits. Fixes: e9be1b86 (media: v4l: fwnode: Use default parallel flags). Cc: stable@vger.kernel.org # for Kernel 4.20 Signed-off-by:
Ondrej Jirman <megous@megous.com> Signed-off-by:
-
Eddie James authored
The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can capture and compress video data from digital or analog sources. With the Aspeed chip acting a service processor, the Video Engine can capture the host processor graphics output. Add a V4L2 driver to capture video data and compress it to JPEG images. Make the video frames available through the V4L2 streaming interface. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Eddie James authored
Document the bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 07 Dec, 2018 28 commits
-
-
Helen Fornazier authored
If link is disabled, media_entity_remote_pad returns NULL, causing a NULL pointer deference. Ignore links that are not enabled instead. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Tomasz Figa authored
Currently v4l2_device_register_subdev_nodes() does not initialize the dev_parent field of the video_device structs it creates for subdevices being registered. This leads to __video_register_device() falling back to the parent device of associated v4l2_device struct, which often does not match the physical device the subdevice is registered for. Due to the problem above, the links between real devices and v4l-subdev nodes cannot be obtained from sysfs, which might be confusing for the userspace trying to identify the hardware. Fix this by initializing the dev_parent field of the video_device struct with the value of dev field of the v4l2_subdev struct. In case of subdevices without a parent struct device, the field will be NULL and the old behavior will be preserved by the semantics of __video_register_device(). Signed-off-by:
-
Wen Yang authored
kmemdup has implemented the function that kmalloc() + memcpy(). We prefer to kmemdup rather than code opened implementation. This issue was detected with the help of coccinelle. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Mauro Carvalho Chehab authored
As complained by gcc: drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c: In function 'rk3288_vpu_jpeg_enc_set_qtable': drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c:70:10: warning: variable 'chroma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *chroma_qtable_p; ^~~~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3288_vpu_hw_jpeg_enc.c:69:10: warning: variable 'luma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *luma_qtable_p; ^~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c: In function 'rk3399_vpu_jpeg_enc_set_qtable': drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c:101:10: warning: variable 'chroma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *chroma_qtable_p; ^~~~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rk3399_vpu_hw_jpeg_enc.c:100:10: warning: variable 'luma_qtable_p' set but not used [-Wunused-but-set-variable] __be32 *luma_qtable_p; ^~~~~~~~~~~~~ drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c: In function 'rockchip_vpu_queue_setup': drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c:522:33: warning: variable 'vpu_fmt' set but not used [-Wunused-but-set-variable] const struct rockchip_vpu_fmt *vpu_fmt; ^~~~~~~ drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c: In function 'rockchip_vpu_buf_prepare': drivers/staging/media/rockchip/vpu/rockchip_vpu_enc.c:560:33: warning: variable 'vpu_fmt' set but not used [-Wunused-but-set-variable] const struct rockchip_vpu_fmt *vpu_fmt; ^~~~~~~ Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
A common mistake is to assume that initializing a var with: struct foo f = { 0 }; Would initialize a zeroed struct. Actually, what this does is to initialize the first element of the struct to zero. According to C99 Standard 6.7.8.21: "If there are fewer initializers in a brace-enclosed list than there are elements or members of an aggregate, or fewer characters in a string literal used to initialize an array of known size than there are elements in the array, the remainder of the aggregate shall be initialized implicitly the same as objects that have static storage duration." So, in practice, it could zero the entire struct, but, if the first element is not an integer, it will produce warnings: drivers/staging/media/sunxi/cedrus/cedrus.c:drivers/staging/media/sunxi/cedrus/cedrus.c:78:49: warning: Using plain integer as NULL pointer drivers/staging/media/sunxi/cedrus/cedrus_dec.c:drivers/staging/media/sunxi/cedrus/cedrus_dec.c:29:35: warning: Using plain integer as NULL pointer As the right initialization would be, instead: struct foo f = { NULL }; Another way to initialize it with gcc is to use: struct foo f = {}; That seems to be a gcc extension, but clang also does the right thing, and that's a clean way for doing it. Anyway, I decided to check upstream what's the most commonly pattern. The "= {}" pattern has about 2000 entries: $ git grep -E "=\s*\{\s*\}"|wc -l 1951 The standard-C compliant pattern has about 2500 entries: $ git grep -E "=\s*\{\s*NULL\s*\}"|wc -l 137 $ git grep -E "=\s*\{\s*0\s*\}"|wc -l 2323 Meaning that developers have split options on that. So, let's opt to the simpler form. Signed-off-by:Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by smatch: drivers/staging/media/sunxi/cedrus/cedrus.c: drivers/staging/media/sunxi/cedrus/cedrus.c:93 cedrus_init_ctrls() error: potential null dereference 'ctx->ctrls'. (kzalloc returns null) While here, remove the memset(), as kzalloc() already zeroes the struct. Signed-off-by:
-
Paul Kocialkowski authored
Add the necessary compatible for supporting the A64 SoC along with a description of the capabilities of this variant. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
Add the necessary compatible for supporting the H5 SoC along with a description of the capabilities of this variant. Signed-off-by:
-
Paul Kocialkowski authored
This introduces two new compatibles for the cedrus driver, for the A64 and H5 platforms. Signed-off-by:
-
Matt Ranostay authored
Not all future supported video chips will always have power management support, and so it is important to check before calling set_power() is defined. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
AMG88xx has a register for setting operating mode. This adds support runtime PM by changing the operating mode. The instruction for changing sleep mode to normal mode is from the reference specifications. https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdfReviewed-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which this is. Cc: Steve Longerbeam <slongerbeam@gmail.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: devel@driverdev.osuosl.org Signed-off-by:
-
Luca Ceresoli authored
Control events can be subscribed and received by the user. Therefore drivers that support controls must expose the V4L2_SUBDEV_FL_HAS_EVENTS flag. [As discussed in https://lkml.org/lkml/2018/11/27/637] Reported-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
-
Gabriel Francisco Mandaji authored
Simulate a more precise timestamp by calculating it based on the current framerate. Signed-off-by:
Gabriel Francisco Mandaji <gfmandaji@gmail.com> Signed-off-by:
-
Sergei Shtylyov authored
Add the R8A77980 SoC support to the R-Car VIN driver. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Sergei Shtylyov authored
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver. Signed-off-by:
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Reviewed-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Vivek Gautam authored
Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 460.308650] ------------[ cut here ]------------ [ 460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536] [ 460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254 [ 460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev [ 460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G W 4.19.1 #82 [ 460.384223] Hardware name: Google Cheza (rev1) (DT) [ 460.389251] pstate: 60400009 (nZCv daif +PAN -UAO) [ 460.394191] pc : debug_dma_map_sg+0x174/0x254 [ 460.398680] lr : debug_dma_map_sg+0x174/0x254 [ 460.403162] sp : ffffff80200c37d0 [ 460.406583] x29: ffffff80200c3830 x28: 0000000000010000 [ 460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80 [ 460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290 [ 460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290 [ 460.428470] x21: ffffff8009037000 x20: 0000000000000001 [ 460.433936] x19: ffffff80091b0000 x18: 0000000000000000 [ 460.439411] x17: 0000000000000000 x16: 000000000000f251 [ 460.444885] x15: 0000000000000006 x14: 0720072007200720 [ 460.450354] x13: ffffff800af536e0 x12: 0000000000000000 [ 460.455822] x11: 0000000000000000 x10: 0000000000000000 [ 460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00 [ 460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80 [ 460.472230] x5 : 0000000000000000 x4 : 0000000000000000 [ 460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948 [ 460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a [ 460.488640] Call trace: [ 460.491165] debug_dma_map_sg+0x174/0x254 [ 460.495307] vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg] [ 460.501150] __vb2_queue_alloc+0x164/0x374 [videobuf2_common] [ 460.507076] vb2_core_reqbufs+0xfc/0x23c [videobuf2_common] [ 460.512815] vb2_reqbufs+0x44/0x5c [videobuf2_v4l2] [ 460.517853] v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem] [ 460.523144] v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem] [ 460.528976] v4l_reqbufs+0x30/0x40 [ 460.532480] __video_do_ioctl+0x36c/0x454 [ 460.536610] video_usercopy+0x25c/0x51c [ 460.540572] video_ioctl2+0x38/0x48 [ 460.544176] v4l2_ioctl+0x60/0x74 [ 460.547602] do_video_ioctl+0x948/0x3520 [ 460.551648] v4l2_compat_ioctl32+0x60/0x98 [ 460.555872] __arm64_compat_sys_ioctl+0x134/0x20c [ 460.560718] el0_svc_common+0x9c/0xe4 [ 460.564498] el0_svc_compat_handler+0x2c/0x38 [ 460.568982] el0_svc_compat+0x8/0x18 [ 460.572672] ---[ end trace ce209b87b2f3af88 ]--- >From above warning one would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate larger sg segments. So, initialize the max segment size properly to weed out this warning. Based on a similar patch sent by Sean Paul for mdss: https://patchwork.kernel.org/patch/10671457/Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Kelvin Lawson authored
Support V4L2 QP parameters in Venus encoder: * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_QP * V4L2_CID_MPEG_VIDEO_H264_B_FRAME_QP * V4L2_CID_MPEG_VIDEO_H264_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_MAX_QP Signed-off-by:
Kelvin Lawson <klawson@lisden.com> Acked-by:
-
Ezequiel Garcia authored
Make the core set the reserved fields to zero in vv4l2_pix_format_mplane.4l2_plane_pix_format, for _MPLANE queue types. Moving this to the core avoids having to do so in each and every driver. Suggested-by:
-
Lubomir Rintel authored
Update URL. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Todor Tomov authored
My Linaro email address with be inactive very soon so switch it to my Gmail address. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
Paul Kocialkowski authored
We initially introduced a spin lock to ensure that the VPU registers are not accessed concurrently between our setup function and IRQ handler. The V4L2 M2M API ensures that only one decoding job runs at a time, so the interrupt signaling the end of decoding will not occur while the next picture is being configured. Spurious interrupts are taken care of in the handler, by checking that we have a valid M2M context and a decoding status available before marking the buffers as done. In addition, holding a spin lock could be problematic if non-atomic operations are required in the setup process for future codec support. As a result, remove the global IRQ spin lock. Signed-off-by:
-
Colin Ian King authored
There are spelling mistakes in dev_dbg messages, fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
-
Colin Ian King authored
There is a spelling mistake in a pvr2_trace trace message, fix it. Signed-off-by:
-
Philipp Zabel authored
Add support for the third loop filter mode V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY, and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls. The filter offset controls are signed values in the -6 to 6 range and are stored into the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are double their value, in range of -12 to 12. Rename variables to more closely match the nomenclature in the H.264 specification. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Philipp Zabel authored
The venus and s5p-mfc drivers add the loop filter alpha/beta offset controls V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA/BETA with a range of -6 to +6, inclusive. This is exactly the range specified for the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2, which store half the actual filter offsets FilterOffsetA/B. Clarify that this control contains the halved offsets. Signed-off-by:
-
Dmitry Osipenko authored
Trace points are much more efficient than debug messages for intensive tracing and could be conveniently enabled / disabled dynamically, hence let's replace debug messages with the trace points. This also makes code a bit cleaner. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
