The motion detection block requires 3 fields to create the motion vector
data. This means that using the default method the first progressive
frame is only generated after 3rd field is consumed.
Hence by default for N input field we would generate N - 2 progressive
frames.

In order to generate N progressive frames from N fields we use the
line averaging mode of the de-interlacer for the first 2 fields and then
revert back to the preferred Edge Directed Interpolation method (using
the motion vector).
Thus creating 2 line averaged frames + N - 2 motion based frames for a
total of N frames.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

On DRA7 since l3_noc event are being reported it was found that
when the write descriptor was being written it was consistently
causing bus error events.

The write address was improperly programmed.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Add a helper to set the background color during vpdma transfer.
This is needed when VPDMA is generating 32 bits RGB format
to have the Alpha channel set to an appropriate value.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The VPDMA (Video Port DMA) as found in devices such as DRA7xx is
used for both the Video Processing Engine (VPE) and the Video Input
Port (VIP). Some devices may have multiple VIP instances each with
its own VPDMA engine. Within VIP two slices can use a single VPDMA
engine simultaneously. So support for multi instances and multiple
clients has been added to VPDMA. Needed modification to the existing
helper functions were then reflected to VPE.

Multi-clients registers offset have also been added in preparation.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The VPDMA (Video Port DMA) as found in devices such as DRA7xx is
used for both the Video Processing Engine (VPE) and the Video Input
Port (VIP).

In preparation for this we need to turn vpdma into its own
kernel module.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

While checking why we need i386 checking, I noticed that
the serial code referred at the driver was moved to another
place. Update it to make clear from where such code came from.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Signed-off-by: Sean Young <sean@mess.org>

There are a few checkpatch complains here. As we're about to
promote this driver out of staging, address them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

This makes transmission more reliable and the code much cleaner.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Tested with a homebrew serial ir. Remove last remmants of the nslu2
which could not be enabled, and fix checkpatch warnings.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Some CEC adapters will receive messages that they initiated. Add a
check that will ignore such messages.

Most hardware behaves correctly in this respect, but I have seen
adapters that don't, so just filter this out in the framework.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

It can fix known problems with embedded video_device structs.
Signed-off-by: Minghsiu Tsai <minghsiu.tsai@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Trivial fix to spelling mistake "unnsupported" to "unsupported"
in debug message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The maximum 'Max TMDS Rate' in the HDMI VSDB block is 340 MHz, not 600.
Higher rates are advertised in the HDMI Forum VSDB block.

So lower the Max TMDS rate in the HDMI VSDB block that the vivid driver
uses to 300 MHz, which is typical of most HDMI 1.4b devices.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Linux 4.9-rc6

* tag 'v4.9-rc6': (305 commits)
  Linux 4.9-rc6
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption
  i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
  kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
  KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
  KVM: async_pf: avoid recursive flushing of work items
  kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
  KVM: Disable irq while unregistering user notifier
  KVM: x86: do not go through vcpu in __get_kvmclock_ns
  MAINTAINERS: Add LED subsystem co-maintainer
  crypto: algif_hash - Fix NULL hash crash with shash
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  KVM: arm64: Fix the issues when guest PMCCFILTR is configured
  arm64: KVM: pmu: Fix AArch32 cycle counter access
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  Revert "drm/mediatek: set vblank_disable_allowed to true"
  ...

Kernel source files need not include <linux/kconfig.h> explicitly
because the top Makefile forces to include it with:

  -include $(srctree)/include/linux/kconfig.h

Remove another reduntdant include, that managed to sneak by commit
97139d4a ("treewide: remove redundant #include <linux/kconfig.h>").
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Many lirc drivers have their own receive buffers which are freed on
unplug (e.g. ir_lirc_unregister). This means that ir->buf->wait_poll
will be freed directly after unplug so do not remove yourself from the
wait queue.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

If you unplug an lirc device while reading from it, you will get an
use after free as the cdev is freed while still in use.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

[  101.457944] ------------[ cut here ]------------
[  101.457954] WARNING: CPU: 3 PID: 1819 at kernel/sched/core.c:7708 __might_sleep+0x7e/0x80
[  101.457960] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffc0364bc2>] lirc_dev_fop_read+0x292/0x4e0 [lirc_dev]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

In learning mode, you can get much longer messages which can run out
of lengths. The usb message will slightly larger.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The wideband receiver is a little awkward on the redrat3. Data arrives
on a different endpoint, and the learning command must be reissued
every time data is learned.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

If redrat3_delete() is called, ensure ep_in and udev members are set
up so we don't dereference null in the error path. Also ensure that
rc dev device exists before we enable the receiver and that the
led urb exists before we create the led device.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Cleanup the error logic, removing checks for things that
should be always initialized when the routines are called,
and remove some bogus messages.

[mchehab@s-opensource.com: fix some merge conflicts]
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

No need to duplicate these in the rc name.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Rename the pnp driver in sysfs from /sys/bus/pnp/drivers/Winbond CIR
to /sys/bus/pnp/drivers/winbond-cir
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

'buf' is malloced in dibusb_rc_query() and should be freed before
leaving from the error handling cases, otherwise it will cause
memory leak.

Fixes: ff1c1235 ("[media] dibusb: handle error code on RC query")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Pull ARM fixes from Russell King:
 "A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

Pull ARM SoC fixes from Olof Johansson:
 "Again a set of smaller fixes across several platforms (OMAP, Marvell,
  Allwinner, i.MX, etc).

  A handful of typo fixes and smaller missing contents from device
  trees, with some tweaks to OMAP mach files to deal with CPU feature
  print misformatting, potential NULL ptr dereference and one setup
  issue with UARTs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
  arm64: dts: marvell: fix clocksource for CP110 slave SPI0
  arm64: dts: marvell: Fix typo in label name on Armada 37xx
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed
  ARM: dts: imx53-qsb: Fix regulator constraints
  ARM: dts: sun8i: fix the pinmux for UART1

Pull ext4 fixes from Ted Ts'o:
 "A security fix (so a maliciously corrupted file system image won't
  panic the kernel) and some fixes for CONFIG_VMAP_STACK"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename.  Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull i2c fixes from Wolfram Sang:
 "Some I2C driver bugfixes (and one documentation fix)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
  i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
  i2c: mux: fix up dependencies
  i2c: Documentation: i2c-topology: fix minor whitespace nit
  i2c: mux: demux-pinctrl: make drivers with no pinctrl work again

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix handling of the 32bit cycle counter
   - Fix cycle counter filtering

  x86:
   - Fix a race leading to double unregistering of user notifiers
   - Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead
   - Use SRCU around kvm_lapic_set_vapic_addr
   - Avoid recursive flushing of asynchronous page faults
   - Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP
   - Let userspace know that KVM_GET_CLOCK is useful with master clock;
     4.9 changed the return value to better match the guest clock, but
     didn't provide means to let guests take advantage of it"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
  KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
  KVM: async_pf: avoid recursive flushing of work items
  kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
  KVM: Disable irq while unregistering user notifier
  KVM: x86: do not go through vcpu in __get_kvmclock_ns
  KVM: arm64: Fix the issues when guest PMCCFILTR is configured
  arm64: KVM: pmu: Fix AArch32 cycle counter access

Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.

Fixes: 7fcac980 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Ziyang Wu <ziywu@cisco.com>
[touched up a few minor issues /peda]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - fix system reset interrupt winkle wakeups
   - fix setting of AIL in hypervisor mode

  Fixes for code merged this cycle:
   - fix exception vector build with 2.23 era binutils
   - fix missing update of HID register on secondary CPUs

  Other:
   - fix missing pr_cont()s
   - invalidate ERAT on tlbiel for POWER9 DD1"

* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  powerpc/64: Fix setting of AIL in hypervisor mode
  powerpc/oops: Fix missing pr_cont()s in instruction dump
  powerpc/oops: Fix missing pr_cont()s in show_regs()
  powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
  powerpc/oops: Fix missing pr_cont()s in show_stack()
  powerpc: Fix exception vector build with 2.23 era binutils
  powerpc/64s: Fix system reset interrupt winkle wakeups

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Compiler warning in caam driver that was the last one remaining

   - Do not register aes-xts in caam drivers on unsupported platforms

   - Regression in algif_hash interface that may lead to an oops"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix NULL hash crash with shash
  crypto: caam - fix type mismatch warning
  crypto: caam - do not register AES-XTS mode on LP units