1. 13 May, 2020 17 commits
  2. 08 May, 2020 5 commits
    • Suravee Suthikulpanit's avatar
      KVM: SVM: Disable AVIC before setting V_IRQ · 7d611233
      Suravee Suthikulpanit authored
      The commit 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window
      while running L2 with V_INTR_MASKING=1") introduced a WARN_ON,
      which checks if AVIC is enabled when trying to set V_IRQ
      in the VMCB for enabling irq window.
      
      The following warning is triggered because the requesting vcpu
      (to deactivate AVIC) does not get to process APICv update request
      for itself until the next #vmexit.
      
      WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd]
       RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd]
       Call Trace:
        kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm]
        ? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm]
        ? _copy_to_user+0x26/0x30
        ? kvm_vm_ioctl+0xb3e/0xd90 [kvm]
        ? set_next_entity+0x78/0xc0
        kvm_vcpu_ioctl+0x236/0x610 [kvm]
        ksys_ioctl+0x8a/0xc0
        __x64_sys_ioctl+0x1a/0x20
        do_syscall_64+0x58/0x210
        entry_SYSCALL_64_after_hwframe+0x44/0xa9
      
      Fixes by sending APICV update request to all other vcpus, and
      immediately update APIC for itself.
      Signed-off-by: default avatarSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
      Link: https://lkml.org/lkml/2020/5/2/167
      Fixes: 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1")
      Message-Id: <1588818939-54264-1-git-send-email-suravee.suthikulpanit@amd.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      7d611233
    • Suravee Suthikulpanit's avatar
      KVM: Introduce kvm_make_all_cpus_request_except() · 54163a34
      Suravee Suthikulpanit authored
      This allows making request to all other vcpus except the one
      specified in the parameter.
      Signed-off-by: default avatarSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
      Message-Id: <1588771076-73790-2-git-send-email-suravee.suthikulpanit@amd.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      54163a34
    • Paolo Bonzini's avatar
      KVM: VMX: pass correct DR6 for GD userspace exit · 45981ded
      Paolo Bonzini authored
      When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
      DR6 was incorrectly copied from the value in the VM.  Instead,
      DR6.BD should be set in order to catch this case.
      
      On AMD this does not need any special code because the processor triggers
      a #DB exception that is intercepted.  However, the testcase would fail
      without the previous patch because both DR6.BS and DR6.BD would be set.
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      45981ded
    • Paolo Bonzini's avatar
      KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6 · d67668e9
      Paolo Bonzini authored
      There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the
      different handling of DR6 on intercepted #DB exceptions on Intel and AMD.
      
      On Intel, #DB exceptions transmit the DR6 value via the exit qualification
      field of the VMCS, and the exit qualification only contains the description
      of the precise event that caused a vmexit.
      
      On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception
      was to be injected into the guest.  This has two effects when guest debugging
      is in use:
      
      * the guest DR6 is clobbered
      
      * the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather
      than just the last one that happened (the testcase in the next patch covers
      this issue).
      
      This patch fixes both issues by emulating, so to speak, the Intel behavior
      on AMD processors.  The important observation is that (after the previous
      patches) the VMCB value of DR6 is only ever observable from the guest is
      KVM_DEBUGREG_WONT_EXIT is set.  Therefore we can actually set vmcb->save.dr6
      to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it
      will be if guest debugging is enabled.
      
      Therefore it is possible to enter the guest with an all-zero DR6,
      reconstruct the #DB payload from the DR6 we get at exit time, and let
      kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6.
      Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT
      is set, but this is harmless.
      
      This may not be the most optimized way to deal with this, but it is
      simple and, being confined within SVM code, it gets rid of the set_dr6
      callback and kvm_update_dr6.
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      d67668e9
    • Paolo Bonzini's avatar
      KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6 · 5679b803
      Paolo Bonzini authored
      kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the
      second argument.  Ensure that the VMCB value is synchronized to
      vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so
      that the current value of DR6 is always available in vcpu->arch.dr6.
      The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant.
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      5679b803
  3. 07 May, 2020 6 commits
  4. 06 May, 2020 4 commits
  5. 04 May, 2020 6 commits
  6. 01 May, 2020 1 commit
    • Marc Zyngier's avatar
      KVM: arm64: Fix 32bit PC wrap-around · 0225fd5e
      Marc Zyngier authored
      In the unlikely event that a 32bit vcpu traps into the hypervisor
      on an instruction that is located right at the end of the 32bit
      range, the emulation of that instruction is going to increment
      PC past the 32bit range. This isn't great, as userspace can then
      observe this value and get a bit confused.
      
      Conversly, userspace can do things like (in the context of a 64bit
      guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
      set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
      that PC hasn't been truncated. More confusion.
      
      Fix both by:
      - truncating PC increments for 32bit guests
      - sanitizing all 32bit regs every time a core reg is changed by
        userspace, and that PSTATE indicates a 32bit mode.
      
      Cc: stable@vger.kernel.org
      Acked-by: default avatarWill Deacon <will@kernel.org>
      Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
      0225fd5e
  7. 30 Apr, 2020 1 commit