Skip to content

L
linux
Switch branch/tag
  1. 16 Feb, 2024 8 commits
    • Jakub Kicinski's avatar
      net/sched: act_mirred: don't override retval if we already lost the skb · 166c2c8a
      Jakub Kicinski authored 
      If we're redirecting the skb, and haven't called tcf_mirred_forward(),
yet, we need to tell the core to drop the skb by setting the retcode
to SHOT. If we have called tcf_mirred_forward(), however, the skb
is out of our hands and returning SHOT will lead to UaF.

Move the retval override to the error path which actually need it.
Reviewed-by: default avatarMichal Swiatkowski <michal.swiatkowski@linux.intel.com>
Fixes: e5cf1baf ("act_mirred: use TC_ACT_REINSERT when possible")
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      166c2c8a
    • Jakub Kicinski's avatar
      net/sched: act_mirred: use the backlog for mirred ingress · 52f671db
      Jakub Kicinski authored 
      The test Davide added in commit ca22da2f ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.

The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.

In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.

Fixes: 53592b36 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: default avatarDavide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      52f671db
    • Randy Dunlap's avatar
      net: ethernet: adi: requires PHYLIB support · a9f80df4
      Randy Dunlap authored 
      This driver uses functions that are supplied by the Kconfig symbol
PHYLIB, so select it to ensure that they are built as needed.

When CONFIG_ADIN1110=y and CONFIG_PHYLIB=m, there are multiple build
(linker) errors that are resolved by this Kconfig change:

   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_open':
   drivers/net/ethernet/adi/adin1110.c:933: undefined reference to `phy_start'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_probe_netdevs':
   drivers/net/ethernet/adi/adin1110.c:1603: undefined reference to `get_phy_device'
   ld: drivers/net/ethernet/adi/adin1110.c:1609: undefined reference to `phy_connect'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
   drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `devm_mdiobus_alloc':
   include/linux/phy.h:455: undefined reference to `devm_mdiobus_alloc_size'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_register_mdiobus':
   drivers/net/ethernet/adi/adin1110.c:529: undefined reference to `__devm_mdiobus_register'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_stop':
   drivers/net/ethernet/adi/adin1110.c:958: undefined reference to `phy_stop'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
   drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_adjust_link':
   drivers/net/ethernet/adi/adin1110.c:1077: undefined reference to `phy_print_status'
   ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_ioctl':
   drivers/net/ethernet/adi/adin1110.c:790: undefined reference to `phy_do_ioctl'
   ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf60): undefined reference to `phy_ethtool_get_link_ksettings'
   ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf68): undefined reference to `phy_ethtool_set_link_ksettings'

Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Reported-by: default avatarkernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402070626.eZsfVHG5-lkp@intel.com/
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: default avatarNuno Sa <nuno.sa@analog.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a9f80df4
    • Kuniyuki Iwashima's avatar
      dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished(). · 66b60b0c
      Kuniyuki Iwashima authored 
      syzkaller reported a warning [0] in inet_csk_destroy_sock() with no
repro.

  WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);

However, the syzkaller's log hinted that connect() failed just before
the warning due to FAULT_INJECTION.  [1]

When connect() is called for an unbound socket, we search for an
available ephemeral port.  If a bhash bucket exists for the port, we
call __inet_check_established() or __inet6_check_established() to check
if the bucket is reusable.

If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num.

Later, we look up the corresponding bhash2 bucket and try to allocate
it if it does not exist.

Although it rarely occurs in real use, if the allocation fails, we must
revert the changes by check_established().  Otherwise, an unconnected
socket could illegally occupy an ehash entry.

Note that we do not put tw back into ehash because sk might have
already responded to a packet for tw and it would be better to free
tw earlier under such memory presure.

[0]:
WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Modules linked in:
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05
RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40
RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8
RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0
R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000
FS:  00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193)
 dccp_close (net/dccp/proto.c:1078)
 inet_release (net/ipv4/af_inet.c:434)
 __sock_release (net/socket.c:660)
 sock_close (net/socket.c:1423)
 __fput (fs/file_table.c:377)
 __fput_sync (fs/file_table.c:462)
 __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539)
 do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f03e53852bb
Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44
RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb
RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c
R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000
R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170
 </TASK>

[1]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f #9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
 should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153)
 should_failslab (mm/slub.c:3748)
 kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867)
 inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135)
 __inet_hash_connect (net/ipv4/inet_hashtables.c:1100)
 dccp_v4_connect (net/dccp/ipv4.c:116)
 __inet_stream_connect (net/ipv4/af_inet.c:676)
 inet_stream_connect (net/ipv4/af_inet.c:747)
 __sys_connect_file (net/socket.c:2048 (discriminator 2))
 __sys_connect (net/socket.c:2065)
 __x64_sys_connect (net/socket.c:2072)
 do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
 entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
RIP: 0033:0x7f03e5284e5d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48
RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000
 </TASK>
Reported-by: default avatarsyzkaller <syzkaller@googlegroups.com>
Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address")
Signed-off-by: default avatarKuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      66b60b0c
    • David S. Miller's avatar
      Merge branch 'bridge-mdb-events' · 82a678e2
      David S. Miller authored 
      Tobias Waldekranz says:

====================
net: bridge: switchdev: Ensure MDB events are delivered exactly once

When a device is attached to a bridge, drivers will request a replay
of objects that were created before the device joined the bridge, that
are still of interest to the joining port. Typical examples include
FDB entries and MDB memberships on other ports ("foreign interfaces")
or on the bridge itself.

Conversely when a device is detached, the bridge will synthesize
deletion events for all those objects that are still live, but no
longer applicable to the device in question.

This series eliminates two races related to the synching and
unsynching phases of a bridge's MDB with a joining or leaving device,
that would cause notifications of such objects to be either delivered
twice (1/2), or not at all (2/2).

A similar race to the one solved by 1/2 still remains for the
FDB. This is much harder to solve, due to the lockless operation of
the FDB's rhashtable, and is therefore knowingly left out of this
series.

v1 -> v2:
- Squash the previously separate addition of
  switchdev_port_obj_act_is_deferred into first consumer.
- Use ether_addr_equal to compare MAC addresses.
- Document switchdev_port_obj_act_is_deferred (renamed from
  switchdev_port_obj_is_deferred in v1, to indicate that we also match
  on the action).
- Delay allocations of MDB objects until we know they're needed.
- Use non-RCU version of the hash list iterator, now that the MDB is
  not scanned while holding the RCU read lock.
- Add Fixes tag to commit message

v2 -> v3:
- Fix unlocking in error paths
- Access RCU protected port list via mlock_dereference, since MDB is
  guaranteed to remain constant for the duration of the scan.

v3 -> v4:
- Limit the search for exiting deferred events in 1/2 to only apply to
  additions, since the problem does not exist in the deletion case.
- Add 2/2, to plug a related race when unoffloading an indirectly
  associated device.

v4 -> v5:
- Fix grammatical errors in kerneldoc of
  switchdev_port_obj_act_is_deferred
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82a678e2
    • Tobias Waldekranz's avatar
      net: bridge: switchdev: Ensure deferred event delivery on unoffload · f7a70d65
      Tobias Waldekranz authored 
      When unoffloading a device, it is important to ensure that all
relevant deferred events are delivered to it before it disassociates
itself from the bridge.

Before this change, this was true for the normal case when a device
maps 1:1 to a net_bridge_port, i.e.

   br0
   /
swp0

When swp0 leaves br0, the call to switchdev_deferred_process() in
del_nbp() makes sure to process any outstanding events while the
device is still associated with the bridge.

In the case when the association is indirect though, i.e. when the
device is attached to the bridge via an intermediate device, like a
LAG...

    br0
    /
  lag0
  /
swp0

...then detaching swp0 from lag0 does not cause any net_bridge_port to
be deleted, so there was no guarantee that all events had been
processed before the device disassociated itself from the bridge.

Fix this by always synchronously processing all deferred events before
signaling completion of unoffloading back to the driver.

Fixes: 4e51bf44 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f7a70d65
    • Tobias Waldekranz's avatar
      net: bridge: switchdev: Skip MDB replays of deferred events on offload · dc489f86
      Tobias Waldekranz authored 
      Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.

While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.

The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.

This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.

To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.

For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:

    root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
    > ip link set dev x3 up master br0

And then destroy the bridge:

    root@infix-06-0b-00:~$ ip link del dev br0
    root@infix-06-0b-00:~$ mvls atu
    ADDRESS             FID  STATE      Q  F  0  1  2  3  4  5  6  7  8  9  a
    DEV:0 Marvell 88E6393X
    33:33:00:00:00:6a     1  static     -  -  0  .  .  .  .  .  .  .  .  .  .
    33:33:ff:87:e4:3f     1  static     -  -  0  .  .  .  .  .  .  .  .  .  .
    ff:ff:ff:ff:ff:ff     1  static     -  -  0  1  2  3  4  5  6  7  8  9  a
    root@infix-06-0b-00:~$

The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.

Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:

    root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
    > ip link set dev x3 up master br1

All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).

Eliminate the race in two steps:

1. Grab the write-side lock of the MDB while generating the replay
   list.

This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:

2. Make sure that no deferred version of a replay event is already
   enqueued to the switchdev deferred queue, before adding it to the
   replay list, when replaying additions.

Fixes: 4f2673b3 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: default avatarTobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: default avatarVladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc489f86
    • Alexander Gordeev's avatar
      net/iucv: fix the allocation size of iucv_path_table array · b4ea9b6a
      Alexander Gordeev authored 
      iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.
Signed-off-by: default avatarAlexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: default avatarAlexandra Winter <wintera@linux.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4ea9b6a
  3. 15 Feb, 2024 28 commits
  5. 14 Feb, 2024 4 commits
    • Linus Torvalds's avatar
      Merge tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux · 1f3a3e2a
      Linus Torvalds authored 
      Pull btrfs fixes from David Sterba:
 "A few regular fixes and one fix for space reservation regression since
  6.7 that users have been reporting:

   - fix over-reservation of metadata chunks due to not keeping proper
     balance between global block reserve and delayed refs reserve; in
     practice this leaves behind empty metadata block groups, the
     workaround is to reclaim them by using the '-musage=1' balance
     filter

   - other space reservation fixes:
      - do not delete unused block group if it may be used soon
      - do not reserve space for checksums for NOCOW files

   - fix extent map assertion failure when writing out free space inode

   - reject encoded write if inode has nodatasum flag set

   - fix chunk map leak when loading block group zone info"

* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: don't refill whole delayed refs block reserve when starting transaction
  btrfs: zoned: fix chunk map leak when loading block group zone info
  btrfs: reject encoded write if inode has nodatasum flag set
  btrfs: don't reserve space for checksums when writing to nocow files
  btrfs: add new unused block groups to the list of unused block groups
  btrfs: do not delete unused block group if it may be used soon
  btrfs: add and use helper to check if block group is used
  btrfs: don't drop extent_map for free space inode on write error
      1f3a3e2a
    • Linus Torvalds's avatar
      Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of... · 91f842ff
      Linus Torvalds authored 
      Merge tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fix from Shuah Khan:
 "One important fix to unregister kunit_bus when KUnit module is
  unloaded.

  Not doing so causes an error when KUnit module tries to re-register
  the bus when it gets reloaded"

* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: device: Unregister the kunit_bus on shutdown
      91f842ff
    • Felix Fietkau's avatar
      netfilter: nf_tables: fix bidirectional offload regression · 84443741
      Felix Fietkau authored 
      Commit 8f84780b ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)

Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b ("netfilter: flowtable: allow unidirectional rules")
Reported-by: default avatarDaniel Golle <daniel@makrotopia.org>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      84443741
    • Kyle Swenson's avatar
      netfilter: nat: restore default DNAT behavior · 0f1ae282
      Kyle Swenson authored 
      When a DNAT rule is configured via iptables with different port ranges,

iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010

we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random.  The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination.  In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.

This patch intends to restore the behavior observed prior to the "Fixes"
tag.

Fixes: 6ed5943f ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: default avatarKyle Swenson <kyle.swenson@est.tech>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      0f1ae282
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7