- 16 Jul, 2022 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Fix more fallout from recent changes of the ACPI CPPC handling on AMD platforms (Mario Limonciello)" * tag 'acpi-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk fix from Petr Mladek: - Make pr_flush() fast when consoles are suspended. * tag 'printk-for-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: do not wait for consoles when suspended
-
Jason A. Donenfeld authored
Currently the jitter mechanism will require two timer ticks per iteration, and it requires N iterations per bit. This N is determined with a small measurement, and if it's too big, it won't waste time with jitter entropy because it'd take too long or not have sufficient entropy anyway. With the current max N of 32, there are large timeouts on systems with a small CONFIG_HZ. Rather than set that maximum to 32, instead choose a factor of CONFIG_HZ. In this case, 1/30 seems to yield sane values for different configurations of CONFIG_HZ. Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Fixes: 78c768e6 ("random: vary jitter iterations based on cycle counter speed") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thadeu Lima de Souza Cascardo authored
When running with return thunks enabled under 32-bit EFI, the system crashes with: kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: 000000005bc02900 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation PGD 18f7063 P4D 18f7063 PUD 18ff063 PMD 190e063 PTE 800000005bc02063 Oops: 0011 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc6+ #166 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:0x5bc02900 Code: Unable to access opcode bytes at RIP 0x5bc028d6. RSP: 0018:ffffffffb3203e10 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000048 RDX: 000000000190dfac RSI: 0000000000001710 RDI: 000000007eae823b RBP: ffffffffb3203e70 R08: 0000000001970000 R09: ffffffffb3203e28 R10: 747563657865206c R11: 6c6977203a696665 R12: 0000000000001710 R13: 0000000000000030 R14: 0000000001970000 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8e013ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 0000000080050033 CR2: 000000005bc02900 CR3: 0000000001930000 CR4: 00000000000006f0 Call Trace: ? efi_set_virtual_address_map+0x9c/0x175 efi_enter_virtual_mode+0x4a6/0x53e start_kernel+0x67c/0x71e x86_64_start_reservations+0x24/0x2a x86_64_start_kernel+0xe9/0xf4 secondary_startup_64_no_verify+0xe5/0xeb That's because it cannot jump to the return thunk from the 32-bit code. Using a naked RET and marking it as safe allows the system to proceed booting. Fixes: aa3d4803 ("x86: Use return-thunk in asm code") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: <stable@vger.kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 Jul, 2022 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - A fix to avoid printing a warning when modules do not exercise any errata-dependent behavior and the SiFive errata are enabled. - A fix to the Microchip PFSOC to attach the L2 cache to the CPU nodes. * tag 'riscv-for-linus-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: don't warn for sifive erratas in modules riscv: dts: microchip: hook up the mpfs' l2cache
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "RISC-V: - Fix missing PAGE_PFN_MASK - Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests() x86: - Fix for nested virtualization when TSC scaling is active - Estimate the size of fastcc subroutines conservatively, avoiding disastrous underestimation when return thunks are enabled - Avoid possible use of uninitialized fields of 'struct kvm_lapic_irq' Generic: - Mark as such the boolean values available from the statistics file descriptors - Clarify statistics documentation" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: emulate: do not adjust size of fastop and setcc subroutines KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op() Documentation: kvm: clarify histogram units kvm: stats: tell userspace which values are boolean x86/kvm: fix FASTOP_SIZE when return thunks are enabled KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1 RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests() riscv: Fix missing PAGE_PFN_MASK
-
https://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fix from Ilya Dryomov: "A folio locking fixup that Xiubo and David cooperated on, marked for stable. Most of it is in netfs but I picked it up into ceph tree on agreement with David" * tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client: netfs: do not unlock and put the folio twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A few driver specific fixes, none especially remarkable, plus a MAINTAINERS file update due to the previous maintainer for the NXP FSPI driver having left the company" * tag 'spi-fix-v5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence-quadspi: Remove spi_master_put() in probe failure path MAINTAINERS: change the NXP FSPI driver maintainer. spi: amd: Limit max transfer and message size spi: aspeed: Fix division by zero spi: aspeed: Add dev_dbg() to dump the spi-mem direct mapping descriptor
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Most of the contents are bugfixes for the devicetree files: - A Qualcomm MSM8974 pin controller regression, caused by a cleanup patch that gets partially reverted here. - Missing properties for Broadcom BCM49xx to fix timer detection and SMP boot. - Fix touchscreen pinctrl for imx6ull-colibri board - Multiple fixes for Rockchip rk3399 based machines including the vdu clock-rate fix, otg port fix on Quartz64-A and ethernet on Quartz64-B - Fixes for misspelled DT contents causing minor problems on imx6qdl-ts7970m, orangepi-zero, sama5d2, kontron-kswitch-d10, and ls1028a And a couple of changes elsewhere: - Fix binding for Allwinner D1 display pipeline - Trivial code fixes to the TEE and reset controller driver subsystems and the rockchip platform code. - Multiple updates to the MAINTAINERS files, marking the Palm Treo support as orphaned, and fixing some entries for added or changed file names" * tag 'soc-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits) arm64: dts: broadcom: bcm4908: Fix cpu node for smp boot arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi Zero ARM: dts: at91: sama5d2: Fix typo in i2s1 node tee: tee_get_drvdata(): fix description of return value optee: Remove duplicate 'of' in two places. ARM: dts: kswitch-d10: use open drain mode for coma-mode pins ARM: dts: colibri-imx6ull: fix snvs pinmux group optee: smc_abi.c: fix wrong pointer passed to IS_ERR/PTR_ERR() MAINTAINERS: add polarfire rng, pci and clock drivers MAINTAINERS: mark ARM/PALM TREO SUPPORT orphan ARM: dts: imx6qdl-ts7970: Fix ngpio typo and count arm64: dts: ls1028a: Update SFP node to include clock dt-bindings: display: sun4i: Fix D1 pipeline count ARM: dts: qcom: msm8974: re-add missing pinctrl reset: Fix devm bulk optional exclusive control getter MAINTAINERS: rectify entry for SYNOPSYS AXS10x RESET CONTROLLER DRIVER ARM: rockchip: Add missing of_node_put() in rockchip_suspend_init() arm64: dts: rockchip: Assign RK3399 VDU clock rate arm64: dts: rockchip: Fix Quartz64-A dwc3 otg port behavior ...
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - Fix brightness key events getting reported twice on some Dells. Regression caused by recent Panasonic hotkey fixes - Fix poweroff no longer working on some devices regression caused by recent poweroff handler rework - Mark new (in 5.19) Intel IFS driver as broken, because of some issues surrounding the userspace (sysfs) API which need to be cleared up - Some hardware-id / quirk additions" * tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: ACPI: video: Fix acpi_video_handles_brightness_key_presses() platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF platform/x86/intel/ifs: Mark as BROKEN platform/x86: asus-wmi: Add key mappings efi: Fix efi_power_off() not being run before acpi_power_off() when necessary platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4 platform/x86/amd/pmc: Add new platform support platform/x86/amd/pmc: Add new acpi id for PMC controller
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "Fix for the Xen gntdev driver causing inappropriate WARN() messages" * tag 'for-linus-5.19a-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: Ignore failure to unmap INVALID_GRANT_HANDLE
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is the regular fixes pull for this week. This has a bunch of amdgpu fixes, major one reverts the buddy allocator until it can be tested more, otherwise just small ones, then i915 has a bunch of fixes. The outstanding firmware regressions reported by phoronix will hopefully be dealt with ASAP. amdgpu: - revert buddy allocator support for now - DP MST blank screen fix for specific platforms - MEC firmware check fix for GC 10.3.7 - Deep color fix for DCE - Fix possible divide by 0 - Coverage blend mode fix - Fix cursor only commit timestamps i915: - Selftest fix - TTM fix sg_table construction - Error return fixes - Fix a performance regression related to waitboost - Fix GT resets" * tag 'drm-fixes-2022-07-15' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Ensure valid event timestamp for cursor-only commits drm/amd/display: correct check of coverage blend mode drm/amd/pm: Prevent divide by zero drm/amd/display: Only use depth 36 bpp linebuffers on DCN display engines. drm/amdkfd: correct the MEC atomic support firmware checking for GC 10.3.7 drm/amd/display: Ignore First MST Sideband Message Return Error drm/i915/selftests: fix subtraction overflow bug drm/i915/gem: Look for waitboosting across the whole object prior to individual waits drm/i915/gt: Serialize TLB invalidates with GT resets drm/i915/gt: Serialize GRDOM access between multiple engine resets drm/i915/ttm: fix sg_table construction drm/i915/selftests: fix a couple IS_ERR() vs NULL tests drm/i915: Fix vm use-after-free in vma destruction drm/i915/guc: ADL-N should use the same GuC FW as ADL-S drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector() drm/i915/gvt: IS_ERR() vs NULL bug in intel_gvt_update_reg_whitelist() Revert "drm/amdgpu: add drm buddy support to amdgpu"
-
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linuxLinus Torvalds authored
Pyll sysctl fix from Luis Chamberlain: "Only one fix for sysctl" * tag 'sysctl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGE
-
Petr Mladek authored
-
Paolo Bonzini authored
Instead of doing complicated calculations to find the size of the subroutines (which are even more complicated because they need to be stringified into an asm statement), just hardcode to 16. It is less dense for a few combinations of IBT/SLS/retbleed, but it has the advantage of being really simple. Cc: stable@vger.kernel.org # 5.15.x: 84e7051c: x86/kvm: fix FASTOP_SIZE when return thunks are enabled Cc: stable@vger.kernel.org Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
John Ogness authored
The console_stop() and console_start() functions call pr_flush(). When suspending, these functions are called by the serial subsystem while the serial port is suspended. In this scenario, if there are any pending messages, a call to pr_flush() will always result in a timeout because the serial port cannot make forward progress. This causes longer suspend and resume times. Add a check in pr_flush() so that it will immediately timeout if the consoles are suspended. Fixes: 3b604ca8 ("printk: add pr_flush()") Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220715061042.373640-2-john.ogness@linutronix.de
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.19-2022-07-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.19-2022-07-13: amdgpu: - DP MST blank screen fix for specific platforms - MEC firmware check fix for GC 10.3.7 - Deep color fix for DCE - Fix possible divide by 0 - Coverage blend mode fix - Fix cursor only commit timestamps Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220713172920.6037-1-alexander.deucher@amd.com
-
- 14 Jul, 2022 23 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-07-13' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Selftest fix (Andrzej) - TTM fix sg_table construction (Matt Auld) - Error return fixes (Dan) - Fix a performance regression related to waitboost (Chris) - Fix GT resets (Chris) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Ys87yMujcG2sJC1R@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Only a revert for amdgpu reverting the switch to the drm buddy allocator. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220714071821.hsejxpsgkbbzlec2@houat
-
Nick Desaulniers authored
Building with UBSAN_DIV_ZERO with clang produces numerous fallthrough warnings from objtool. In the case of uncheck division, UBSAN_DIV_ZERO may introduce new control flow to check for division by zero. Because the result of the division is undefined, LLVM may optimize the control flow such that after the call to __ubsan_handle_divrem_overflow doesn't matter. If panic_on_warn was set, __ubsan_handle_divrem_overflow would panic. The problem is is that panic_on_warn is run time configurable. If it's disabled, then we cannot guarantee that we will be able to recover safely. Disable this config for clang until we can come up with a solution in LLVM. Link: https://github.com/ClangBuiltLinux/linux/issues/1657 Link: https://github.com/llvm/llvm-project/issues/56289 Link: https://lore.kernel.org/lkml/CAHk-=wj1qhf7y3VNACEexyp5EbkNpdcu_542k-xZpzmYLOjiCg@mail.gmail.com/Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit 4a57a840. Dave Chinner reports: "As I suspected would occur, this change causes test failures. e.g generic/517 in fstests fails with: generic/517 1s ... - output mismatch [..] -deduped 131172/131172 bytes at offset 65536 +deduped 131072/131172 bytes at offset 65536" can you please revert this commit for the 5.19 series to give us more time to investigate and consider the impact of the the API change on userspace applications before we commit to changing the API" That changed return value seems to reflect reality, but with the fstest change, let's revert for now. Requested-by: Dave Chinner <david@fromorbit.com> Link: https://lore.kernel.org/all/20220714223238.GH3600936@dread.disaster.area/ Cc: Ansgar Lößer <ansgar.loesser@tu-darmstadt.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
Clang warns: arch/x86/kernel/cpu/bugs.c:58:21: error: section attribute is specified on redeclared variable [-Werror,-Wsection] DEFINE_PER_CPU(u64, x86_spec_ctrl_current); ^ arch/x86/include/asm/nospec-branch.h:283:12: note: previous declaration is here extern u64 x86_spec_ctrl_current; ^ 1 error generated. The declaration should be using DECLARE_PER_CPU instead so all attributes stay in sync. Cc: stable@vger.kernel.org Fixes: fc02735b ("KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Muchun Song authored
"numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured, "numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to fix it. Fixes: 4518085e ("mm, sysctl: make NUMA stats configurable") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bpf and wireless. Still no major regressions, the release continues to be calm. An uptick of fixes this time around due to trivial data race fixes and patches flowing down from subtrees. There has been a few driver fixes (particularly a few fixes for false positives due to 66e4c8d9 which went into -next in May!) that make me worry the wide testing is not exactly fully through. So "calm" but not "let's just cut the final ASAP" vibes over here. Current release - regressions: - wifi: rtw88: fix write to const table of channel parameters Current release - new code bugs: - mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify - mlx5: - TC, allow offload from uplink to other PF's VF - Lag, decouple FDB selection and shared FDB - Lag, correct get the port select mode str - bnxt_en: fix and simplify XDP transmit path - r8152: fix accessing unset transport header Previous releases - regressions: - conntrack: fix crash due to confirmed bit load reordering (after atomic -> refcount conversion) - stmmac: dwc-qos: disable split header for Tegra194 Previous releases - always broken: - mlx5e: ring the TX doorbell on DMA errors - bpf: make sure mac_header was set before using it - mac80211: do not wake queues on a vif that is being stopped - mac80211: fix queue selection for mesh/OCB interfaces - ip: fix dflt addr selection for connected nexthop - seg6: fix skb checksums for SRH encapsulation/insertion - xdp: fix spurious packet loss in generic XDP TX path - bunch of sysctl data race fixes - nf_log: incorrect offset to network header Misc: - bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs" * tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) nfp: flower: configure tunnel neighbour on cmsg rx net/tls: Check for errors in tls_device_init MAINTAINERS: Add an additional maintainer to the AMD XGBE driver xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue selftests/net: test nexthop without gw ip: fix dflt addr selection for connected nexthop net: atlantic: remove aq_nic_deinit() when resume net: atlantic: remove deep parameter on suspend/resume functions sfc: fix kernel panic when creating VF seg6: bpf: fix skb checksum in bpf_push_seg6_encap() seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors seg6: fix skb checksum evaluation in SRH encapsulation/insertion sfc: fix use after free when disabling sriov net: sunhme: output link status with a single print. r8152: fix accessing unset transport header net: stmmac: fix leaks in probe net: ftgmac100: Hold reference returned by of_get_child_by_name() nexthop: Fix data-races around nexthop_compat_mode. ipv4: Fix data-races around sysctl_ip_dynaddr. tcp: Fix a data-race around sysctl_tcp_ecn_fallback. ...
-
Hans de Goede authored
Commit 3a0cf7ab ("ACPI: video: Change how we determine if brightness key-presses are handled") made acpi_video_handles_brightness_key_presses() report false when none of the ACPI Video Devices support backlight control. But it turns out that at least on a Dell Inspiron N4010 there is no ACPI backlight control, yet brightness hotkeys are still reported through the ACPI Video Bus; and since acpi_video_handles_brightness_key_presses() now returns false, brightness keypresses are now reported twice. To fix this rename the has_backlight flag to may_report_brightness_keys and also set it the first time a brightness key press event is received. Depending on the delivery of the other ACPI (WMI) event vs the ACPI Video Bus event this means that the first brightness key press might still get reported twice, but all further keypresses will be filtered as before. Note that this relies on other drivers reporting brightness key events calling acpi_video_handles_brightness_key_presses() when delivering the events (rather then once during driver probe). This is already required and documented in include/acpi/video.h: /* * Note: The value returned by acpi_video_handles_brightness_key_presses() * may change over time and should not be cached. */ Fixes: 3a0cf7ab ("ACPI: video: Change how we determine if brightness key-presses are handled") Link: https://lore.kernel.org/regressions/CALF=6jEe5G8+r1Wo0vvz4GjNQQhdkLT5p8uCHn6ZXhg4nsOWow@mail.gmail.com/Reported-and-tested-by: Ben Greening <bgreening@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220713211101.85547-2-hdegoede@redhat.com
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three smb3 client fixes: - two multichannel fixes: fix a potential deadlock freeing a channel, and fix a race condition on failed creation of a new channel - mount failure fix: work around a server bug in some common older Samba servers by avoiding padding at the end of the negotiate protocol request" * tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb3: workaround negprot bug in some Samba servers cifs: remove unnecessary locking of chan_lock while freeing session cifs: fix race condition with delayed threads
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Enable SETATTR(time_create) to fix regression with Mac OS clients - Fix a lockd crasher and broken NLM UNLCK behavior" * tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: lockd: fix nlm_close_files lockd: set fl_owner when unlocking files NFSD: Decode NFSv4 birth time attribute
-
Linus Torvalds authored
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity fixes from Mimi Zohar: "Here are a number of fixes for recently found bugs. Only 'ima: fix violation measurement list record' was introduced in the current release. The rest address existing bugs" * tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix potential memory leak in ima_init_crypto() ima: force signature verification when CONFIG_KEXEC_SIG is configured ima: Fix a potential integer overflow in ima_appraise_measurement ima: fix violation measurement list record Revert "evm: Fix memleak in init_desc"
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - quieten the spectre-bhb prints - mark flattened device tree sections as shareable - remove some obsolete CPU domain code and help text - fix thumb unaligned access abort emulation - fix amba_device_add() refcount underflow - fix literal placement * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9208/1: entry: add .ltorg directive to keep literals in range ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction ARM: 9213/1: Print message about disabled Spectre workarounds only once ARM: 9212/1: domain: Modify Kconfig help text ARM: 9211/1: domain: drop modify_domain() ARM: 9210/1: Mark the FDT_FIXED sections as shareable ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
-
Guenter Roeck authored
The UML function names to_virt() and to_phys() are exposed by UML headers, and are very generic and may be defined by drivers. As it turns out, commit 9409c9b6 ("pmem: refactor pmem_clear_poison()") did exactly that. This results in build errors such as the following when trying to build um:allmodconfig: drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’: ./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’ 105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt)) | ^~~~~~~ Use less generic function names for the um specific to_phys() and to_virt() functions to fix the problem and to avoid similar problems in the future. Fixes: 9409c9b6 ("pmem: refactor pmem_clear_poison()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Hopefully the last one for 5.19. This became bigger than wished, but all changes are pretty device-specific small fixes, which look less worrisome. The majority of changes are about various ASoC fixes, while the usual HD-audio quirks are included as well" * tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits) ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221 ALSA: hda/realtek: fix mute/micmute LEDs for HP machines ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671 ALSA: hda - Add fixup for Dell Latitidue E5430 ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model ALSA: hda/realtek: Fix headset mic for Acer SF313-51 ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks() ASoC: rt5640: Fix the wrong state of JD1 and JD2 ASoC: Intel: sof_rt5682: fix out-of-bounds array access ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph() ASoC: tas2764: Fix amp gain register offset & default ASoC: tas2764: Correct playback volume range ASoC: tas2764: Fix and extend FSYNC polarity handling ASoC: tas2764: Add post reset delays ASoC: dt-bindings: Fix description for msm8916 ASoC: doc: Capitalize RESET line name ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE ASoC: cs47l92: Fix event generation for OUT1 demux ...
-
Tianyu Yuan authored
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956 ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tariq Toukan authored
Add missing error checks in tls_device_init. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Reported-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tom Lendacky authored
Add Shyam Sundar S K as an additional maintainer to support the AMD XGBE network device driver. Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/db367f24089c2bbbcd1cec8e21af49922017a110.1657751501.git.thomas.lendacky@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Juergen Gross authored
xenvif_rx_next_skb() is expecting the rx queue not being empty, but in case the loop in xenvif_rx_action() is doing multiple iterations, the availability of another skb in the rx queue is not being checked. This can lead to crashes: [40072.537261] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [40072.537407] IP: xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.537534] PGD 0 P4D 0 [40072.537644] Oops: 0000 [#1] SMP NOPTI [40072.537749] CPU: 0 PID: 12505 Comm: v1-c40247-q2-gu Not tainted 4.12.14-122.121-default #1 SLE12-SP5 [40072.537867] Hardware name: HP ProLiant DL580 Gen9/ProLiant DL580 Gen9, BIOS U17 11/23/2021 [40072.537999] task: ffff880433b38100 task.stack: ffffc90043d40000 [40072.538112] RIP: e030:xenvif_rx_skb+0x23/0x590 [xen_netback] [40072.538217] RSP: e02b:ffffc90043d43de0 EFLAGS: 00010246 [40072.538319] RAX: 0000000000000000 RBX: ffffc90043cd7cd0 RCX: 00000000000000f7 [40072.538430] RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffc90043d43df8 [40072.538531] RBP: 000000000000003f R08: 000077ff80000000 R09: 0000000000000008 [40072.538644] R10: 0000000000007ff0 R11: 00000000000008f6 R12: ffffc90043ce2708 [40072.538745] R13: 0000000000000000 R14: ffffc90043d43ed0 R15: ffff88043ea748c0 [40072.538861] FS: 0000000000000000(0000) GS:ffff880484600000(0000) knlGS:0000000000000000 [40072.538988] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [40072.539088] CR2: 0000000000000080 CR3: 0000000407ac8000 CR4: 0000000000040660 [40072.539211] Call Trace: [40072.539319] xenvif_rx_action+0x71/0x90 [xen_netback] [40072.539429] xenvif_kthread_guest_rx+0x14a/0x29c [xen_netback] Fix that by stopping the loop in case the rx queue becomes empty. Cc: stable@vger.kernel.org Fixes: 98f6d57c ("xen-netback: process guest rx packets in batches") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220713135322.19616-1-jgross@suse.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Linus Torvalds authored
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has not been building cleanly on powerpc and causes link errors due to mixing hard- and soft-float object files: powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o [..] and while patches are floating around, it's not exactly obvious what is going on. The problem bisects to commit 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") but that is probably more about changing config variables than the fundamental cause. Despite the bisection result, a more directly related commit seems to be 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder"). It's probably a combination of the two. This has been going on since the merge window, without any final word. So instead of blindly applying patches that may or may not be the right thing, let's disable this for now. As Michael Ellerman says: "IIUIC this code was never enabled on ppc before, so disabling it seems like a reasonable fix to get the build clean" and once we have more actual feedback (and find any potential users) we can always re-enable it with the patch that fixes the issues and back-port as necessary. Fixes: 41b7a347 ("powerpc: Book3S 64-bit outline-only KASAN support") Fixes: 26f4712a ("drm/amd/display: move FPU related code from dcn31 to dml/dcn31 folder") Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/20220606153910.GA1773067@roeck-us.net/ Link: https://lore.kernel.org/all/20220618232737.2036722-1-linux@roeck-us.net/ Link: https://lore.kernel.org/all/20220713050724.GA2471738@roeck-us.net/Acked-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Vitaly Kuznetsov authored
'vector' and 'trig_mode' fields of 'struct kvm_lapic_irq' are left uninitialized in kvm_pv_kick_cpu_op(). While these fields are normally not needed for APIC_DM_REMRD, they're still referenced by __apic_accept_irq() for trace_kvm_apic_accept_irq(). Fully initialize the structure to avoid consuming random stack memory. Fixes: a183b638 ("KVM: x86: make apic_accept_irq tracepoint more generic") Reported-by: syzbot+d6caa905917d353f0d07@syzkaller.appspotmail.com Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220708125147.593975-1-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Merge bugfix needed in both 5.19 (because it's bad) and 5.20 (because it is a prerequisite to test new features).
-
Nicolas Dichtel authored
This test implement the scenario described in the commit "ip: fix dflt addr selection for connected nexthop". The test configures a nexthop object with an output device only (no gateway address) and a route that uses this nexthop. The goal is to check if the kernel selects a valid source address. Link: https://lore.kernel.org/netdev/20220712095545.10947-1-nicolas.dichtel@6wind.com/Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220713114853.29406-2-nicolas.dichtel@6wind.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Nicolas Dichtel authored
When a nexthop is added, without a gw address, the default scope was set to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen but rejected when the route is used. When using a route without a nexthop id, the scope can be configured in the route, thus the problem doesn't exist. To explain more deeply: when a user creates a nexthop, it cannot specify the scope. To create it, the function nh_create_ipv4() calls fib_check_nh() with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was setting scope to 'host'. Then, nh_create_ipv4() calls fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is chosen before the route is inserted. When a 'standard' route (ie without a reference to a nexthop) is added, fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by the user. iproute2 set the scope to 'link' by default. Here is a way to reproduce the problem: ip netns add foo ip -n foo link set lo up ip netns add bar ip -n bar link set lo up sleep 1 ip -n foo link add name eth0 type dummy ip -n foo link set eth0 up ip -n foo address add 192.168.0.1/24 dev eth0 ip -n foo link add name veth0 type veth peer name veth1 netns bar ip -n foo link set veth0 up ip -n bar link set veth1 up ip -n bar address add 192.168.1.1/32 dev veth1 ip -n bar route add default dev veth1 ip -n foo nexthop add id 1 dev veth0 ip -n foo route add 192.168.1.1 nhid 1 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > RTNETLINK answers: Invalid argument > $ ip netns exec foo ping -c1 192.168.1.1 > ping: connect: Invalid argument Try without nexthop group (iproute2 sets scope to 'link' by dflt): ip -n foo route del 192.168.1.1 ip -n foo route add 192.168.1.1 dev veth0 Try to get/use the route: > $ ip -n foo route get 192.168.1.1 > 192.168.1.1 dev veth0 src 192.168.0.1 uid 0 > cache > $ ip netns exec foo ping -c1 192.168.1.1 > PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. > 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms > > --- 192.168.1.1 ping statistics --- > 1 packets transmitted, 1 received, 0% packet loss, time 0ms > rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms CC: stable@vger.kernel.org Fixes: 597cfe4f ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-