This fixes a potentially bad (although very rarely triggered) bug in the
ppc64 hugepage code.

hpte_update() did not correctly calculate the address for hugepages, so
pte_clear() (which we use for hugepage ptes as well as normal ones)
would not correctly flush the hash page table entry.  Under the right
circumstances this could potentially lead to duplicate hash entries,
which is very bad.

davem's upcoming patch to pass the virtual address directly to set_pte()
and its ilk will obsolete this, but this is bad enough it should
probably be fixed in the meantime.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Acked-by: William Irwin <wli@holomorphy.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into pobox.com:/garz/repo/net-drivers-2.6

Factor out some code
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

IRQ races during change of mtu
- NAPI poll must be enabled prior to IRQ activation or the IRQ handler
  will not know what to do with an incoming packet;
- rtl8169_down() needs to try twice to sync with the IRQ handler when
  it is not issued under !netif_running() protection.

Both changes make it safe to request a change of mtu on a live device.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Some futex functions do get_user calls while holding mmap_sem for
reading.  If get_user() faults, and another thread happens to be in mmap
(or somewhere else holding waiting on down_write for the same
semaphore), then do_page_fault will deadlock.  Most architectures seem
to be exposed to this.

To avoid it, make sure the page is available.  If not, release the
semaphore, fault it in and retry.

I also found another exposure by inspection, moving some of the code
around avoids the possible deadlock there.
Signed-off-by: Olof Johansson <olof@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Advanced SATA drivers should not (and cannot) use the basic
PCI IDE hooks for checking the Status and Error registers, as these
registers are either in non-standard locations, or simply don't
exist.

In the error handling path, libata was unconditionally calling some
PCI IDE hardware bitbanging functions, which would cause an oops
in the AHCI driver and any other advanced libata driver.

Not that anybody cares about the sign, but the signed type does
the wrong thing for right shifts. Which we had.

Fix a dm-raid1 deadlock: nested spinlocks with _irq.
Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Tim Burgess <tim.burgess@anu.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It feels like 2.6.11 is right around the corner.  I would like to disable
ALPS suport for some devices we don't know how to handle properly yet to
cut down on number of complaints that we broke mouse support.

Input: ALPS - do not activate native mode for devices whose data
       we can not handle yet.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A patch that I sent in earlier to allow the use of the data address
breakpoint on machines with a hypervisor happened to break things for those
configs, such as for the Maple board, where we don't compile in the
routines for calling the hypervisor.  This patch fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Reworking the ppc32 mm helps me find interesting bugs in the existing bug,
well, brown paper bag for me, I made this one a while ago.

The routine flush_hash_one_pte() used by ptep_test_and_clear_young()
wasn't properly recaclulating the vaddr from the pte pointer &
page->index.  The result is that we probably never flushed things from
the hash, so that's at least the _second_ bug affecting
ptep_test_and_clear_young(), swap on ppc32 must have been really broken
:(

This fixes it.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into pobox.com:/garz/repo/libata-2.6

Uniformize comments
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Removal of unused #define
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Nail an overrun in skb alignment and remove the relevant magic variable.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Fix rx skb allocation error logging

Signed arithmetic is not required as rtl8169_rx_fill() return belongs
to the [0; NUM_RX_DESC] interval.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into pobox.com:/garz/repo/netdev-2.6/r8169

Duh... GETLK returns F_UNLCK if and only if the lock could be placed.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Christoph Lameter's patch that change page allocators to use GFP_ZERO
broke ppc32 in a subtle way. Our allocator is designed to work before
mem_init_done, in which cases it uses a ppc specific early_get_page()
which doesn't return zeroed pages. However, he removed the call to
clear_page() unconditionally, thus causing the kernel initial page
tables to have random data in them.

They are initialized with set_pte, which means it's _mostly_ harmless,
except that set_pte on ppc32 preserves the _PAGE_HASHPTE bit, thus we
end up with random bits there, which can cause issues with further
manipulation of the kernel page tables and will slow down all hash
faults to them causing unnecessary searches.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move <linux/limits.h> back up in <linux/fs.h>, to get the right ordering
for the NR_OPEN dual define (ugh).
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The following moves all includes <linux/fs.h> (except <linux/ioctl.h>
and <linux/config.h> down to below the existing __KERNEL__ test.  None
of these includes are needed by the user-visible portions of the header,
and in some cases can cause userland apps to break.

For example, LTP and sash with an empty <linux/autoconf.h> will fail
thusly:

  cc -Wall  -I../../include -g -Wall -I../../../../include -Wall    setrlimit02.c -L../../../../lib -lltp  -o setrlimit02
  In file included from /usr/include/asm/atomic.h:6,
                   from /usr/include/linux/fs.h:20,
                   from setrlimit02.c:46:
  /usr/include/asm/processor.h:68: error: `CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function)
  /usr/include/asm/processor.h:68: error: requested alignment is not a constant

Build/run tested with a glibc rebuild as well.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Various routines were putting a full struct tcp_sock on
the local stack.  What they really wanted was a subset
of this information when doing TCP options processing
when we only have a mini-socket (for example in SYN-RECVD
and TIME_WAIT states).

Therefore pull out the needed information into a sub-struct
and use that in the TCP options processing routines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trying to build latest BK-kernel with !CONFIG_PCI and with CONFIG_ISAPNP=y
and CONFIG_PNPBIOS=y I got the following build error:

  LD    vmlinux
drivers/built-in.o(.text+0x5486): In function
'pnpbios_parse_allocated_irqresource':
: undefined reference to 'pcibios_penalize_isa_irq'

Clearly pcibios_penalize_isa_irq() is meant to be called only with
CONFIG_PCI=y.
Signed-off-by: Mika Kukkonen <mikukkon@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The paca holds a shadow of the context struct, used for the real mode SLB
handler.  When we open up a new segment we have to sync up the paca copy
otherwise we will instantiate small page SLB entries until the next context
switch (at which point we resync the paca copy).
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Greg's tree changes the order of fields in struct reasource, causing x86_64 to
explode nastily.  Fix.

Cc: Greg KH <greg@kroah.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix io_remap_page_range() call to pass a missing arg.
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

We need asm/irq.h for __irq_itoa() on sparc[64].
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Some patch in -mm causes the sparc64 build to explode because `struct rusage'
isn't defined or declared in compat.h.   So forward-declare it.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use named initialisers.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Used named initialisers in this declaration before Greg's tree's struct
resource layout changes come in and break it.

(Probably "dma page reg" shouldn't have spaces in the name - be friendly to
/proc/ioports parsers?)

Cc: Richard Henderson <rth@twiddle.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The BIC TCP cwnd problem as identified by Yee-Ting Li and Doug Leith
is that the computation is recalc_ssthresh is incorrect and
BICTCP_1_OVER_BETA/2 should be BICTCP_1_OVER_BETA*2.

My fix is to implement the code from BIC TCP 1.1 which uses a sysctl
to set the beta.  There are a few variable name changes from the 1.1
code, and made the scaling factor a #define instead of hardcoded.

I validated this using netem and kprobes, for more details see
http://developer.osdl.org/shemminger/bic-beta-patch.pdfSigned-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes double-kfree that caused slab corruption.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ppc32's implementation of ptep_test_and_clear_young() has a logic error
which makes it fail to flush the hash table. Thus PAGE_ACCESSED is
almost never set again after beeing cleared (unless something else cause
that hash entry to be flushed).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a minor modification to the previous patch submission that does
not assume the default contents of the DSPCFG register are zero.

When used with Revision D of the DP83815, the "Recommended Registers
Configuration" from page 78 of the DP83815 data sheet is not entirely
compatible with the driver's "short cable patch".  When the DSPCFG
register is written with the value suggested in the document, then
do_cable_magic() can't read the DSP coefficient and determines that all
cables attached to the DP83815D are 'short', regardless of actual
length.  Short cables (< 30m) cause do_cable_magic to enable additional
attenuation to reduce CRC and idle errors.  If the extra attenuation is
unintentionally enabled for long cables (> 50m?), they will not operate
properly.  The National Semiconductor driver, 'dp83815.c' from
http://www.national.com/appinfo/networks/files/linux_2_4.tar.gz was used
as a basis for this modification.
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Attached is the patch to address the incorrect programming of
individual multicast address into the NIC.
Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Someone added a new dev_set_mac_address() to netdevice.h
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This makes for better messages on what is going on. It also
allows us (if we want to), to pick the PCI starting address
somewhere else in the gap. That may be a good idea (ie do a

	pci_mem_start = (gapstart + (gapsize >> 3) + 0xfffff) & ~0xfffff;

or similar.

We really don't care about anything beyond the 4GB mark,
so make the tests for that explicit (and add a comment),
and use regular "unsigned long" for the gap information.