- 11 Nov, 2020 8 commits
-
-
Lee Jones authored
Kernel-doc expects struct documentation to start with 'struct <name>'. Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/llcc-qcom.c:77: warning: cannot understand function prototype: 'struct llcc_slice_config ' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201103152838.1290217-21-lee.jones@linaro.orgSigned-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning: drivers/soc/qcom/smp2p.c:149: warning: Function parameter or member 'out' not described in 'qcom_smp2p' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'major' not described in 'wcnss_version_resp' drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'minor' not described in 'wcnss_version_resp' drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'version' not described in 'wcnss_version_resp' drivers/soc/qcom/wcnss_ctrl.c:81: warning: Function parameter or member 'revision' not described in 'wcnss_version_resp' drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'rpdev' not described in 'wcnss_ctrl_smd_callback' drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'priv' not described in 'wcnss_ctrl_smd_callback' drivers/soc/qcom/wcnss_ctrl.c:122: warning: Function parameter or member 'addr' not described in 'wcnss_ctrl_smd_callback' drivers/soc/qcom/wcnss_ctrl.c:122: warning: Excess function parameter 'channel' description in 'wcnss_ctrl_smd_callback' drivers/soc/qcom/wcnss_ctrl.c:272: warning: Function parameter or member 'priv' not described in 'qcom_wcnss_open_channel' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/smsm.c:140: warning: Function parameter or member 'mask' not described in 'smsm_update_bits' drivers/soc/qcom/smsm.c:140: warning: Excess function parameter 'offset' description in 'smsm_update_bits' drivers/soc/qcom/smsm.c:257: warning: bad line: drivers/soc/qcom/smsm.c:260: warning: bad line: Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/smem.c:135: warning: Function parameter or member 'toc' not described in 'smem_header' drivers/soc/qcom/smem.c:275: warning: Function parameter or member 'socinfo' not described in 'qcom_smem' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/qcom-geni-se.c:85: warning: Cannot understand * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core drivers/soc/qcom/qcom-geni-se.c:246: warning: Function parameter or member 'rx_rfr' not described in 'geni_se_init' drivers/soc/qcom/qcom-geni-se.c:246: warning: Excess function parameter 'rx_rfr_wm' description in 'geni_se_init' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/qcom_aoss.c:86: warning: Function parameter or member 'cooling_devs' not described in 'qmp' Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/soc/qcom/qcom_aoss.c: In function ‘qmp_send’: drivers/soc/qcom/qcom_aoss.c:228:9: warning: variable ‘tlen’ set but not used [-Wunused-but-set-variable] Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Reviewed-by:
-
- 28 Oct, 2020 1 commit
-
-
Viresh Kumar authored
has_opp_table isn't used anymore, remove it. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/08ec1ee1d4252a266956abb5f1e0e0026d753564.1603867487.git.viresh.kumar@linaro.orgSigned-off-by:
-
- 27 Oct, 2020 1 commit
-
-
Lina Iyer authored
RPMH and drivers that use RPMH APIs need Command DB API to find the dynamic resource information. Let's match the RPMH to match the Command DB configuration. This should fix undefined symbol references reported by CI : aarch64-linux-ld: drivers/clk/qcom/clk-rpmh.o: in function `clk_rpmh_probe': >> clk-rpmh.c:(.text+0xac): undefined reference to `cmd_db_read_addr' >> aarch64-linux-ld: clk-rpmh.c:(.text+0xc0): undefined reference to `cmd_db_read_aux_data' aarch64-linux-ld: drivers/soc/qcom/rpmh-rsc.o: in function `rpmh_rsc_probe': >> rpmh-rsc.c:(.text+0x42c): undefined reference to `cmd_db_ready' aarch64-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe': >> qcom-rpmh-regulator.c:(.text+0x3e0): undefined reference to `cmd_db_read_addr' Cc: Todd Kjos <tkjos@google.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Maulik Shah <mkshah@codeaurora.org> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20201008040907.7036-1-ilina@codeaurora.orgSigned-off-by:
-
- 26 Oct, 2020 17 commits
-
-
Bjorn Andersson authored
-
Lina Iyer authored
This patch enables Command DB driver to be loaded as a module. Command DB is inherent to RPMH interaction and as such would never be unloaded. Add supress_bind_attrs to make it a permanently loaded module. Reviewed-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by:
-
Douglas Anderson authored
The functions geni_se_select_fifo_mode() and geni_se_select_fifo_mode() are a little funny. They read/write a bunch of memory mapped registers even if they don't change or aren't relevant for the current protocol. Let's make them a little more sane. We'll also add a comment explaining why we don't do some of the operations for UART. NOTE: there is no evidence at all that this makes any performance difference and it fixes no bugs. However, it seems (to me) like it makes the functions a little easier to understand. Decreasing the amount of times we read/write memory mapped registers is also nice, even if we are using "relaxed" variants. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201013142448.v2.3.I646736d3969dc47de8daceb379c6ba85993de9f4@changeidSigned-off-by:
-
Douglas Anderson authored
This reverts commit 02b9aec5. As talked about in the patch ("soc: qcom: geni: More properly switch to DMA mode"), swapping the order of geni_se_setup_m_cmd() and geni_se_xx_dma_prep() can sometimes cause corrupted transfers. Thus we traded one problem for another. Now that we've debugged the problem further and fixed the geni helper functions to more disable FIFO interrupts when we move to DMA mode we can revert it and end up with (hopefully) zero problems! To be explicit, the patch ("soc: qcom: geni: More properly switch to DMA mode") is a prerequisite for this one. Fixes: 02b9aec5 ("i2c: i2c-qcom-geni: Fix DMA transfer race") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Akash Asthana <akashast@codeaurora.org> Tested-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20201013142448.v2.2.I7b22281453b8a18ab16ef2bfd4c641fb1cc6a92c@changeidSigned-off-by:
-
Douglas Anderson authored
On geni-i2c transfers using DMA, it was seen that if you program the command (I2C_READ) before calling geni_se_rx_dma_prep() that it could cause interrupts to fire. If we get unlucky, these interrupts can just keep firing (and not be handled) blocking further progress and hanging the system. In commit 02b9aec5 ("i2c: i2c-qcom-geni: Fix DMA transfer race") we avoided that by making sure we didn't program the command until after geni_se_rx_dma_prep() was called. While that avoided the problems, it also turns out to be invalid. At least in the TX case we started seeing sporadic corrupted transfers. This is easily seen by adding an msleep() between the DMA prep and the writing of the command, which makes the problem worse. That means we need to revert that commit and find another way to fix the bogus IRQs. Specifically, after reverting commit 02b9aec5 ("i2c: i2c-qcom-geni: Fix DMA transfer race"), I put some traces in. I found that the when the interrupts were firing like crazy: - "m_stat" had bits for M_RX_IRQ_EN, M_RX_FIFO_WATERMARK_EN set. - "dma" was set. Further debugging showed that I could make the problem happen more reliably by adding an "msleep(1)" any time after geni_se_setup_m_cmd() ran up until geni_se_rx_dma_prep() programmed the length. A rather simple fix is to change geni_se_select_dma_mode() so it's a true inverse of geni_se_select_fifo_mode() and disables all the FIFO related interrupts. Now the problematic interrupts can't fire and we can program things in the correct order without worrying. As part of this, let's also change the writel_relaxed() in the prepare function to a writel() so that our DMA is guaranteed to be prepared now that we can't rely on geni_se_setup_m_cmd()'s writel(). NOTE: the only current user of GENI_SE_DMA in mainline is i2c. Fixes: 37692de5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller") Fixes: 02b9aec5 ("i2c: i2c-qcom-geni: Fix DMA transfer race") Signed-off-by:
-
Stephan Gerhold authored
MSM8916 has two RPM power domains: VDDCX and VDDMX. Add the necessary definitions to manage them with rpmpd. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200916104135.25085-4-stephan@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
MSM8916 has two RPM power domains: VDDCX and VDDMX. Add the device tree bindings to manage them through rpmpd. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jun Nie authored
Add the shared modemcx/cx/mx power-domains found on MSM8939. Reviewed-by:
Jun Nie <jun.nie@linaro.org> Link: https://lore.kernel.org/r/20200930100145.9457-3-jun.nie@linaro.orgSigned-off-by:
-
Jun Nie authored
MSM8939 has three RPM power domains: VDDCX and VDDMX and VDDMDCX. Add the device tree bindings to manage them through rpmpd. Reviewed-by:
-
Stephan Gerhold authored
Older SoCs like MSM8916, MSM8939, MSM8974, MSM8996, ... use "voltage corners" instead of "voltage levels". It seems like they all use exactly the same set of corner values, a value from 0-6 where 6 is the maximum corner (super turbo). In preparation to add the power domains for MSM8916, rename MAX_8996_RPMPD_STATE to MAX_CORNER_RPMPD_STATE to make it clear that this is the max_state to be used for all SoCs using corners. - Signed-off-by:
-
Konrad Dybcio authored
Add the shared cx/mx and sensor sub-system's cx and mx power-domains found on SDM660. Signed-off-by:
Konrad Dybcio <konradybcio@gmail.com> Signed-off-by:
AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20201018122620.9735-1-kholk11@gmail.comSigned-off-by:
-
Konrad Dybcio authored
Add the new bindings for SDM660 rpmpd power domains. Signed-off-by:
-
John Stultz authored
This patch allow the rpmh driver to be loaded as a permenent module. Meaning it can be loaded from a module, but then cannot be unloaded. Ideally, it would include a remove hook and related logic, but the rpmh driver is fairly core to the system, so once its loaded with almost anything else to get the system to go, the dependencies are not likely to ever also be removed. So making it a permanent module at least improves things slightly over requiring it to be a built in driver. Cc: Todd Kjos <tkjos@google.com> Cc: Saravana Kannan <saravanak@google.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rajendra Nayak <rnayak@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by:
Maulik Shah <mkshah@codeaurora.org> Reviewed-by:
-
Maulik Shah authored
Commit efde2659 ("drivers: qcom: rpmh-rsc: Use rcuidle tracepoints for rpmh") was written to fix a bug seen in an unmerged series that implemented a struct generic_pm_domain::power_off() callback calling rpmh_flush(). See stack trace below. Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 lockdep_rcu_suspicious+0xe4/0x104 __tcs_buffer_write+0x230/0x2d0 rpmh_rsc_write_ctrl_data+0x210/0x270 rpmh_flush+0x84/0x24c rpmh_domain_power_off+0x78/0x98 _genpd_power_off+0x40/0xc0 genpd_power_off+0x168/0x208 Later the final merged solution is to use CPU PM notification to invoke rpmh_flush() and power_off() callback of genpd is not implemented in the driver. CPU PM notifiers are run with RCU enabled/watching (see cpu_pm_notify() and how it calls rcu_irq_enter_irqson() before calling the notifiers). Remove this change since RCU will not be idle during CPU PM notifications hence not required to use _rcuidle tracepoint. Using _rcuidle tracepoint prevented rpmh driver to be loadable module as these are not exported symbols. This reverts commit efde2659. Cc: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Isaac J. Manjarres authored
Older chipsets may not be allowed to configure certain LLCC registers as that is handled by the secure side software. However, this is not the case for newer chipsets and they must configure these registers according to the contents of the SCT table, while keeping in mind that older targets may not have these capabilities. So add support to allow such configuration of registers to enable capacity based allocation and power collapse retention for capable chipsets. Reason for choosing capacity based allocation rather than the default way based allocation is because capacity based allocation allows more finer grain partition and provides more flexibility in configuration. As for the retention through power collapse, it has an advantage where the cache hits are more when we wake up from power collapse although it does burn more power but the exact power numbers are not known at the moment. Signed-off-by:
Isaac J. Manjarres <isaacm@codeaurora.org> Reviewed-by:
-
Sai Prakash Ranjan authored
Cleanup qcom_llcc_cfg_program() by moving llcc configuration to a separate function of its own. Also correct misspelled 'instance' caught by checkpatch. Reviewed-by:
-
Evan Green authored
smp2p_update_bits() should disable interrupts when it acquires its spinlock. This is important because without the _irqsave, a priority inversion can occur. This function is called both with interrupts enabled in qcom_q6v5_request_stop(), and with interrupts disabled in ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be consistent to avoid the panic notifier deadlocking because it's sitting on the thread that's already got the lock via _request_stop(). Found via lockdep. Cc: stable@vger.kernel.org Fixes: 50e99641 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Reviewed-by:
Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeidSigned-off-by:
-
- 25 Oct, 2020 13 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
-
