- 20 May, 2015 10 commits
-
-
Doug Ledford authored
-
Ira Weiny authored
After discussion upstream, it was agreed to transition the usage of iboe in the kernel to roce. This keeps our terminology consistent with what was finalized in the IBTA Annex 16 and IBTA Annex 17 publications. Signed-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Ira Weiny authored
Remove query_protocol callback Use the new Core Capability bits for: rdma_protocol_* rdma_cap_ib_mad rdma_cap_ib_smi rdma_cap_ib_cm rdma_cap_iw_cm rdma_cap_ib_sa rdma_cap_ib_mcast rdma_cap_af_ib rdma_cap_eth_ah Signed-off-by:
-
Ira Weiny authored
As of commit 5eb620c8 "IB/core: Add helpers for uncached GID and P_Key searches"; pkey_tbl_len and gid_tbl_len are immutable data which are stored in the ib_device. The per port core capability flags to be added later are also immutable data to be stored in the ib_device object. In preparation for this create a structure for per port immutable data and place the pkey and gid table lengths within this structure. "get_port_immutable" is added as a mandatory device function to allow the drivers to fill in this data. Signed-off-by:
-
Ira Weiny authored
The addition of the rdma_cap_ib_mad is technically broken in ib_umad_remove_one because the loop "i" value is not a port value. This bug resulted in the ib_umad failing to properly remove its resources when the core capability functions were converted to bit fields. NOTE: e17371d73908 did not result in broken behavior on its own. It was only an issue when the implementation of rdma_cap_ib_mad was changed. Pass the port value to rdma_cap_ib_mad. Fixes: e17371d73908 ("IB/Verbs: Use management helper rdma_cap_ib_mad()") Signed-off-by: -
Ira Weiny authored
Use the new common rdma_[start|end]_port functions instead of using local variables and figuring it out on the fly. Signed-off-by:
-
Ira Weiny authored
The following functions only need read access to the data passed to them. ib_mad_kernel_rmpp_agent is_rmpp_data_mad rcv_has_same_gid ib_find_send_mad Clarify with const specifiers Signed-off-by:
-
Ira Weiny authored
rcv_has_same_class only needs access to the MAD header specify WR and Receive WC as const Reviewed-By:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
-
Ira Weiny authored
ib_response_mad only needs read access to the MAD header, not write access to the entire mad struct, so replace struct ib_mad with const struct ib_mad_hdr Reviewed-By:
-
Ira Weiny authored
validate_mad only needs read access to the MAD header, not write access to the entire mad struct, so replace struct ib_mad with const struct ib_mad_hdr Reviewed-By:
-
- 18 May, 2015 30 commits
-
-
Sagi Grimberg authored
Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <anna.schumaker@netapp.com> Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Sagi Grimberg authored
Some of us keep revisiting the code to decode enumerations that appear in out logs. Let's borrow the nice logging helpers that exists in xprtrdma and rds for CMA events, IB events and WC statuses. Reviewd-by:
-
Bart Van Assche authored
The SCSI standard defines 64-bit values for LUNs. Large arrays employing large or hierarchical LUN numbers become more and more common. So update the SRP initiator to use 64-bit LUN numbers. See also Hannes Reinecke, commit 9cb78c16 ("scsi: use 64-bit LUNs"), June 2014. The largest LUN number that has been tested is 0xd2003fff00000000. Checked the following structure sizes with gdb: * sizeof(struct srp_cmd) = 48 * sizeof(struct srp_tsk_mgmt) = 48 * sizeof(struct srp_aer_req) = 36 The ibmvscsi changes have been compile tested only (on a PPC system). Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Yann Droneaud <ydroneaud@opteya.com> Cc: Sebastian Parschauer <sebastian.riemer@profitbricks.com> Cc: Brian King <brking@linux.vnet.ibm.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
-
Bart Van Assche authored
Remove the !ch->target tests from the reconnect code. These tests are not needed: upon entry of srp_rport_reconnect() it is guaranteed that all ch->target pointers are non-NULL. None of the functions srp_new_cm_id(), srp_finish_req(), srp_create_ch_ib() nor srp_connect_ch() modifies this pointer. srp_free_ch_ib() is never called concurrently with srp_rport_reconnect(). Signed-off-by:
-
Bart Van Assche authored
The function srp_free_req_data() does not use ch->target. Hence remove the ch->target != NULL check. Signed-off-by:
-
Bart Van Assche authored
Move the module version and release date into separate fields. This makes the modinfo output easier to read. Signed-off-by:
-
Bart Van Assche authored
A long time ago the data type int64_t was declared as long long on x86 systems and as long on PPC systems. Today that data type is declared as long long on all Linux architectures. This means that the casts from uint64_t into unsigned long long are superfluous. Remove these superfluous casts. Signed-off-by:
-
Bart Van Assche authored
Unlike FC, there is no risk that SCSI devices will be offlined by the SCSI error handler if the SCSI error handler is started while a reconnect attempt is ongoing. Hence report timeout errors as soon as possible if a higher software layer (e.g. multipathd) needs to be informed about a timeout. It is assumed that if both fast_io_fail_tmo < 0 and rport->dev_loss_tmo < 0 that this means that there is no need to report timeouts quickly. Signed-off-by:
-
Bart Van Assche authored
Although it is possible to let SRP I/O continue if a reconnect results in a reduction of the number of channels, the current code does not handle this scenario correctly. Instead of making the reconnect code more complex, consider this as a reconnection failure. Signed-off-by:
-
Bart Van Assche authored
Reception of a DREQ message only causes the state of a single channel to change. Hence move the 'connected' member variable from the target to the channel data structure. This patch avoids that following false positive warning can be reported by srp_destroy_qp(): WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:617 srp_destroy_qp+0xa6/0x120 [ib_srp]() Call Trace: [<ffffffff8106e10f>] warn_slowpath_common+0x7f/0xc0 [<ffffffff8106e16a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa0440226>] srp_destroy_qp+0xa6/0x120 [ib_srp] [<ffffffffa0440322>] srp_free_ch_ib+0x82/0x1e0 [ib_srp] [<ffffffffa044408b>] srp_create_target+0x7ab/0x998 [ib_srp] [<ffffffff81346f60>] dev_attr_store+0x20/0x30 [<ffffffff811dd90f>] sysfs_write_file+0xef/0x170 [<ffffffff8116d248>] vfs_write+0xc8/0x190 [<ffffffff8116d411>] sys_write+0x51/0x90 Signed-off-by:
-
Bart Van Assche authored
Avoid that receiving a DREQ while RDMA channels are being established causes target->qp_in_error to be reset. Signed-off-by:
-
Bart Van Assche authored
Fix a scsi_get_host() / scsi_host_put() imbalance in the error path of srp_create_target(). See also patch "IB/srp: Avoid that I/O hangs due to a cable pull during LUN scanning" (commit ID 34aa654e). Signed-off-by:
-
Bart Van Assche authored
Avoid that srp_terminate_io() can get invoked while srp_queuecommand() is in progress. This patch avoids that an I/O timeout can trigger the following kernel warning: WARNING: at drivers/infiniband/ulp/srp/ib_srp.c:1447 srp_terminate_io+0xef/0x100 [ib_srp]() Call Trace: [<ffffffff814c65a2>] dump_stack+0x4e/0x68 [<ffffffff81051f71>] warn_slowpath_common+0x81/0xa0 [<ffffffff8105204a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa075f51f>] srp_terminate_io+0xef/0x100 [ib_srp] [<ffffffffa07495da>] __rport_fail_io_fast+0xba/0xc0 [scsi_transport_srp] [<ffffffffa0749a90>] rport_fast_io_fail_timedout+0xe0/0xf0 [scsi_transport_srp] [<ffffffff8106e09b>] process_one_work+0x1db/0x780 [<ffffffff8106e75b>] worker_thread+0x11b/0x450 [<ffffffff81073c64>] kthread+0xe4/0x100 [<ffffffff814cf26c>] ret_from_fork+0x7c/0xb0 See also patch "scsi_transport_srp: Add transport layer error handling" (commit ID 29c17324). Signed-off-by:
-
Bart Van Assche authored
Introduce the helper function srp_wait_for_queuecommand(). Move the definition of scsi_request_fn_active(). Add a comment above srp_wait_for_queuecommand() that support for scsi-mq needs to be added. This patch does not change any functionality. A second call to srp_wait_for_queuecommand() will be introduced in the next patch. Signed-off-by:
-
Ira Weiny authored
Return values of 0 do not make sense for functions which return enum smi_action Reviewed-By:
-
Ira Weiny authored
is_rmpp_data_mad is more descriptive for this function. Reviewed-By:
-
Ira Weiny authored
Previously start_port and end_port were defined in 2 places, cache.c and device.c and this prevented their use in other modules. Make these common functions, change the name to reflect the rdma name space, and update existing users. Signed-off-by:
-
Michael Wang authored
Increase the level of documentation for the rdma_cap_* helpers introduced by Michael Wang <yun.wang@profitbricks.com>. This patch is loosely based on a patch Michael wrote to enhance the documentation of these functions, but has been significantly modified in terms of verbiage. In addition, the comments were moved from a kernel Documentation/infiniband/ file to being inline in the header file itself for the functions in question. Finally, the documentation was formated in proper kdoc format. Signed-off-by:
Michael Wang <yun.wang@profitbricks.com> Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_eth_ah() to help us check if the port of an IB device support Ethernet Address Handler. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_af_ib() to help us check if the port of an IB device support Native Infiniband Address. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_read_multi_sge() to help us check if the port of an IB device support RDMA Read Multiple Scatter-Gather Entries. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_ib_mcast() to help us check if the port of an IB device support Infiniband Multicast. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_iw_cm() to help us check if the port of an IB device support IWARP Communication Manager. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_ib_cm() to help us check if the port of an IB device support Infiniband Communication Manager. Signed-off-by:
-
Michael Wang authored
Introduce helper rdma_cap_ib_smi() to help us check if the port of an IB device support Infiniband Subnet Management Interface. Signed-off-by:
-
