It's a 'dentry', so use it instead of something else.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The file was empty, remove it as it wasn't doing anything.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Found by the checkpatch.pl tool
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Found by the checkpatch.pl tool
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The gss code has never been built, there is no Kconfig option for it, so
delete it as code that can not build goes bad really fast.

If someone wants it back, they can revert this and fix any build errors
that might be in it.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix up the relative paths in the .c files to properly build with the
Makefile change.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also fix up the relative paths in the .c files to properly build
now

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also fix up the relative paths in the .c files to properly build now

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In drivers/staging/lustre/lustre/include there was a bunch of .h files
relying on ccflags to be set up right.  Make all of them proper relative
paths so that ccflags for different subdirs can be now removed.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There were two paths being added, yet only one was needed.  Remove both,
and fix up the 3 .c files to point to the location of the needed .h
file.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The lnet code did not even need the cflags setting in the Makefile, so
remove it, as it is not doing anything at all.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We need to remove the ccflags from the Lustre code as it prevents
individual object files from building properly in the kernel build
system.  It also hids the horrid mess that the Lustre include files are
made up of.

Start out by removing the toplevel ccflags variable pointing to
drivers/staging/lustre/include/ as a valid include path.  This requires
the absolute include markings of a bunch of .h and .c files, which is
also done here.

Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: hpdd-discuss <hpdd-discuss@lists.01.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

whitespace changes only - git diff -w shows no difference

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

whitespace changes only - git diff -w shows no difference

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

whitespace changes only - git diff -w shows no difference

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

whitespace changes only - git diff -w shows no difference

Cc: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The issue was discovered with static analysis and has two instances in
this file. The code looks like this
if (x < 65536000) {
	...
} else if (x < 655360000) {
	...
} else if (x <= 0xffffffff /* 6553600000 */) {
	...
} else if (x <= 0xffffffff /* 65536000000 */) {
	...
}

The meaning of this block is to select appropriate clock frequency for
interval timer basing on "x", which is amount of time.

Notes:
1. That last condition matches previous one - that's the issue.
2. Decimal numbers in comments don't match hex numbers in expressions.
But in first case the numbers have same order, while in the second case
the hex number is the same, and the decimal one is 10 times bigger.
3. Actually type of "x" is "unsigned int", so its exact upper limit is
not obviously known.
4. There's no "else" block.

So it makes sense to make an "else" block from last "else if" case. The
code inside the block seems correct for such usage.

[ Actually, get rid of the final "else if" case and change the
next-to-last "else if" case to an "else" as the upper limit of "x" _is_
known to be 0xffffffff (UINT_MAX), which is less than 6553600000 -- Ian ]

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79871Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s->maxdata for the do subdevice should be 1, however currently it is
being set to 0xffffffff.  Fix this.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to test whether devpriv is null in this function.  The
check looks left over and we can just remove it.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This value is only needed for subdevices that support async commands.
The comedi core will default the value to 1 when it is not initialized.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

patch 'vnt_set_keymode don't save pairwise key entry' caused
a slight regression in access point mode

Only don't save in station mode.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The default is that all the channels are enabled for rf types
not mentioned here.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adds "Daeseok Youn" to maintainers list for dgap driver.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_tty_digisetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_tty_digigetcustombaud() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_tty_digisetedelay() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_set_modem_info() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch", "bd" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_tty_digigeta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "un".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Null checks in dgap_tty_digiseta() are already done by
dgap_tty_ioctl() and change "tty" as a paramter of this function
to "ch" and "bd" which are used in dgap_tty_digiseta().
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>