- 13 Aug, 2014 9 commits
-
-
Fengguang Wu authored
arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:961:2-3: Unneeded semicolon arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:1100:2-3: Unneeded semicolon arch/x86/kernel/cpu/perf_event_intel_uncore_nhmex.c:1138:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: Yan, Zheng <zheng.z.yan@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Link: http://lkml.kernel.org/n/tip-ovfvr4nbqjo7nzc16y2lpjy9@git.kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Yan, Zheng authored
Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
-
Yan, Zheng authored
Signed-off-by:
-
Yan, Zheng authored
Signed-off-by:
-
Yan, Zheng authored
Prepare for moving hardware specific code to seperate files. Signed-off-by:
-
Jiri Olsa authored
In cases when the owner task exits before the workload and the workload made some forks, all the events stay in until the last workload process exits. Thats' because each child event holds parent reference. We want to release all children events once the parent is gone, because at that time there's no process to read them anyway, so they're just eating resources. This removal races with process exit, which removes all events and fork, which clone events. To be clear of those two, adding work queue to remove orphaned child for context in case such event is detected. Using delayed work queue (with delay == 1), because we queue this work under perf scheduler callbacks. Normal work queue tries to wake up the queue process, which deadlocks on rq->lock in this place. Also preventing clones from abandoned parent event. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Signed-off-by:
-
Jiri Olsa authored
Adding fake EVENT_OWNER_KERNEL owner pointer value for kernel perf events, so we could distinguish it from user events, which needs special care in following patch. Signed-off-by:
-
Peter Zijlstra authored
The model number descriptions got a bit messy, clean them up. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible fixes and changes: * Show better error message in case we fail to open counters due to EBUSY error, for instance, when oprofile is running. (Jiri Olsa) * Honour -w in the report tools (report, top), allowing to specify the widths for the histogram entries columns. (Namhyung Kim) * Don't run workload if not told to, as happens when the user has no permission for profiling and even then the specified workload ends up running (Arnaldo Carvalho de Melo) * Do not ignore mmap events in 'perf kmem report'. This tool was using the kernel mmaps in the running machine instead of processing the mmap records from the perf.data file. (Namhyung Kim) * Properly show submicrosecond times in 'perf kvm stat' (Christian Borntraeger) * Honour existing 'perf record' --time/-T command line option (Andi Kleen) * Make sure --symfs usage includes the path separator (Arnaldo Carvalho de Melo) Development infrastructure fixes and changes: * Fix arm64 build error (Mark Salter) * Fix make PYTHON override (Namhyung Kim) * Rename ordered_samples to ordered_events and allow setting a queue size for ordering events (Jiri Olsa) * Default to python version 2 (Thomas Ilsche) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
- 12 Aug, 2014 29 commits
-
-
Thomas Ilsche authored
According to PEP 394 recommendation [1], it's more portable to use python2 rather than plain python to refer python binary version 2. Since there're distros using python3 by default like Arch, and we don't support python3 (yet), it'd be better using python2 explicitly. But older versions (prior to 2.7) seem not to provide python2 but just python. Given that it's only old version, try python2 first and then fallback to python. It'll ensure that it always points to python 2.x. I tested (compiles and perf script runs) with the combinations: 1) python -> python2.x, python-config -> python2.x-config python2 N/A, python2-config N/A 2) python -> python3.x, python-config -> python3.x-config python2 -> python2.x, python2-config -> python2.x-config 3) python -> python2.x, python-config -> python2.x-config python2 -> python2.x, python2-config -> python2.x-config 4) python -> python2.x, python-config -> python2.x-config python2 -> python2.x, python2-config N/A Based on / replaces the patch 2/2 by Namhyung Kim. [1] https://www.python.org/dev/peps/pep-0394Based-on-patch-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Thomas Ilsche <thomas.ilsche@tu-dresden.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/53DF8493.6070206@tu-dresden.deSigned-off-by:
-
Jiri Olsa authored
We were using PERF_COUNT_SW_CPU_CLOCK as an probing event type. Using expected PERF_TYPE_SOFTWARE type instead. Signed-off-by:
-
Namhyung Kim authored
If user sets ui.show-headers config option to false, it didn't calculate default column width so it broke the alignment. This is because it does the calculation just before showing headers. Move it to the beginning of the hist browser so that it can be called regardless of the config option. Reported-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
-
Namhyung Kim authored
It makes the code a bit simpler and easier to debug IMHO. I guess it can also remove similar code in perf diff, but let's keep it for a future work. :) Signed-off-by:
-
Namhyung Kim authored
Add -w/--column-widths option like perf report does so that users are able to see symbols even with some very long C++ library/functions. It can be a list separated by comma for each column. $ perf top -w 0,20,30 The value of 0 means there's no limit. Signed-off-by:
-
Namhyung Kim authored
Set column width and do not change it if user gives -w/--column-widths option. It'll truncate longer symbols than the width if exists. Signed-off-by:
-
Namhyung Kim authored
Save column length in the hpp format and pass it to print functions. This is a preparation for users to control column width in the output. Signed-off-by:
-
Namhyung Kim authored
So that it can properly handle alignment requirements later. To do that, add percent_color_len_snprintf() fucntion to help coloring of overhead columns. Signed-off-by:
-
Namhyung Kim authored
Now perf left-aligns column headers but the contents does not. It should have same alignment. This requires a change in pid sort key - it consists of two part (pid and comm). As length of comm can be vary it'd be better to change the order of them. Thanks to Jiri Olsa for pointing this out. Signed-off-by:
-
Namhyung Kim authored
Thomas reported that make PYTHON=python2 is not work on some systems. I can reproduce it on my ArchLinux box too. This is because it's overridden by config/feature-checks/Makefile regardless of PYTHON setting. I guess it's a bug slipped into during the feature checking change. Actually, we don't need to check python-config in the feature-checks. We can just pass appropriate FEATURE_CHECK_*FLAGS. Reported-by:
-
Namhyung Kim authored
The perf kmem command didn't process mmap events for some unknown reason and it instead gets symbol info from a running kernel. This is problematic if perf kmem record was run on a different kernel. This patch adds the mmap event handlers and reverts the commit e727ca73 ("perf kmem: Resolve kernel symbols again"). Signed-off-by:
-
Jiri Olsa authored
Showing better error message in case we fail to open counters due to the EBUSY error. If we detect oprofile daemon process running, we now display following message for EBUSY error: $ perf record ls Error: The PMU counters are busy/taken by another profiler. We found oprofile daemon running, please stop it and try again. In case oprofiled was not detected the current error message stays: $ perf record ls Error: The sys_perf_event_open() syscall returned with 16 (Device or resource busy) for event (cycles). /bin/dmesg may provide additional information. No CONFIG_PERF_EVENTS=y kernel support configured? Also changing PERF_FLAG_FD_CLOEXEC detection code not to display error in case of EBUSY error, as it currently does: $ perf record ls Error: perf_event_open(..., PERF_FLAG_FD_CLOEXEC) failed with unexpected error 16 (Device or resource busy) perf_event_open(..., 0) failed unexpectedly with error 16 (Device or resource busy) The PMU counters are busy/taken by another profiler. We found oprofile daemon running, please stop it and try again. Signed-off-by:
-
Jiri Olsa authored
In forced flush (OE_FLUSH__HALF) we break the rules of the flush timestamp via PERF_RECORD_FINISHED_ROUND event, so we could get out of order event. Do not force error in this case plus changing the output warning to use WARN_ONCE. Signed-off-by:
David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-8q8794a8nlmpd1u8xrqmcyd2@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
Adding some prints for ordered events queue, to help debug issues. Adding debug_ordered_events debug variable to be able to enable ordered events debug messages using: $ perf --debug ordered-events=2 report ... Also using oe pointer in perf_session__queue_event instead of chained session variable dereferencing. Signed-off-by:
-
Jiri Olsa authored
Adding report.queue-size config file option to setup the maximum allocation size for session's struct ordered_events object. Signed-off-by:
-
Jiri Olsa authored
Adding perf_config_u64 function to be able to parse 'llong' values out of config file. Signed-off-by:
-
Jiri Olsa authored
Adding ordered_events__free function to release all the struct ordered_events data. It's replacement for former perf_session_free_sample_buffers function. Signed-off-by:
-
Jiri Olsa authored
Adding ordered_events__init function for struct ordered_events struct initialization. Signed-off-by:
-
Jiri Olsa authored
As Namhyung pointed out we can use list_move in ordered_events_delete. Signed-off-by:
-
Jiri Olsa authored
Move ordered events code into separated object ordered-events.[ch]. No functional change was intended. Signed-off-by:
-
Jiri Olsa authored
Making perf_session__deliver_event global function, as it will be called from another object in following patch. Signed-off-by:
-
Jiri Olsa authored
In previous patches we added a limit for ordered events queue allocation size. If we reach this size we need to flush (part of) the queue to get some free buffers. The current functionality is not affected, because the limit is hard coded to (u64) -1. The configuration code for size will come in following patches. Signed-off-by:
-
Jiri Olsa authored
Add limit to the ordered events queue allocation. This way we will be able to control the size of the queue buffers. There's no limit at the moment (it's set to (u64) -1). The config code will come in following patches. Signed-off-by:
-
Jiri Olsa authored
Centralizing the next_flush calculation under the ordered_events__flush function. Signed-off-by:
-
Jiri Olsa authored
Adding new ordered events interface to new|delete event buffer: ordered_events__new - allocate event buffer from the cache ordered_events__delete - return event buffer to the cache Signed-off-by:
-
Jiri Olsa authored
Rename 'struct ordered_events' members to fit better the ordered events style. No functional change was intended. Signed-off-by:
-
Jiri Olsa authored
Following up with ordered_samples rename for ordered_samples and sample_queue structs to ordered_events and ordered_event structs respectively. Also changing flush_sample_queue function name to ordered_events_flush. No functional change was intended. Signed-off-by:
-
Jiri Olsa authored
The time ordering is generic for all kinds of events, so using generic name 'ordered_events' for ordered_samples bool in perf_tool struct. No functional change was intended. Signed-off-by:
-
Andi Kleen authored
Time stamps are always implicitely enabled for record currently. The old --time/-T option is a nop. Allow the user to disable timestamps by using --no-time, honouring the existing option. The defaults are unchanged. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406789104-25863-10-git-send-email-zheng.z.yan@intel.comSigned-off-by:
-
- 08 Aug, 2014 1 commit
-
-
Masami Hiramatsu authored
Skip kretprobe hit in NMI context, because if an NMI happens inside the critical section protected by kretprobe_table.lock and another(or same) kretprobe hit, pre_kretprobe_handler tries to lock kretprobe_table.lock again. Normal interrupts have no problem because they are disabled with the lock. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: David S. Miller <davem@davemloft.net> Link: http://lkml.kernel.org/r/20140804031016.11433.65539.stgit@kbuild-fedora.novalocal [ Minor edits for clarity. ] Signed-off-by:
-
- 05 Aug, 2014 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vdso updates from Ingo Molnar: "Further simplifications and improvements to the VDSO code, by Andy Lutomirski" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/vsyscall: Fix warn_bad_vsyscall log output x86/vdso: Set VM_MAYREAD for the vvar vma x86, vdso: Get rid of the fake section mechanism x86, vdso: Move the vvar area before the vdso text
-
