- 08 Apr, 2022 1 commit
-
-
Matthew Auld authored
I guess this was missed in the conversion or something. Fixes: 7bc80a54 ("dma-buf: add enum dma_resv_usage v4") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407164532.1242578-1-matthew.auld@intel.comSigned-off-by:
-
- 07 Apr, 2022 39 commits
-
-
Daniel Vetter authored
Accessing the one in fbmem.c without taking the right locks is a bad idea. Instead maintain our own private copy, which is fully protected by console_lock() (like everything else in fbcon.c). That copy is serialized through fbcon_fb_registered/unregistered() calls. Also this means we do not need to hold a full fb_info reference, which is nice because doing so would mean a refcount loop between the console and the fb_info. But it's also not nice since it means console_lock() must be held absolutely everywhere. Well strictly speaking we could still try to do some refcounting games again by calling get_fb_info before we drop the console_lock. But things will get tricky. Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Claudio Suarez <cssk@net-c.es> Cc: Du Cheng <ducheng2@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220405210335.3434130-18-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
There's a bunch of confusions going on here: - The deferred fbcon setup notifier should only be cleaned up from fb_console_exit(), to be symmetric with fb_console_init() - We also need to make sure we don't race with the work, which means temporarily dropping the console lock (or we can deadlock) - That also means no point in clearing deferred_takeover, we are unloading everything anyway. - Finally rename fbcon_exit to fbcon_release_all and move it, since that's what's it doing when being called from consw->con_deinit through fbcon_deinit. To answer a question from Sam just quoting my own reply: > We loose the call to fbcon_release_all() here [in fb_console_exit()]. > We have part of the old fbcon_exit() above, but miss the release parts. Ah yes that's the entire point of this change. The release_all in the fbcon exit path was only needed when fbcon was a separate module indepedent from core fb.ko. Which means it was possible to unload fbcon while having fbdev drivers registered. But since we've merged them that has become impossible, so by the time the fb.ko module can be unloaded, there's guaranteed to be no fbdev drivers left. And hence removing them is pointless. v2: Explain the why better (Sam) Acked-by:
-
Daniel Vetter authored
con2fb_release_oldinfo() has a bunch more kfree() calls than fbcon_exit(), but since kfree() on NULL is harmless doing that in both places should be ok. This is also a bit more symmetric now again with fbcon_open also allocating the fbcon_ops structure. Acked-by:
-
Daniel Vetter authored
Ideally console_lock becomes an implementation detail of fbcon.c and doesn't show up anywhere in fbmem.c. We're still pretty far from that, but at least the register/unregister code is there now. With this the do_fb_ioctl() handler is the only code in fbmem.c still calling console_lock(). Acked-by:
-
Daniel Vetter authored
This shouldn't be a problem in practice since until we've actually taken over the console there's nothing we've registered with the console/vt subsystem, so the exit/unbind path that check this can't do the wrong thing. But it's confusing, so fix it by moving it a tad later. Acked-by:
-
Daniel Vetter authored
Now we get to the real motiviation, because fbmem.c insists that that's the right lock for these. Ofc fbcon.c has a lot more places where it probably should call lock_fb_info(). But looking at fbmem.c at least most of these seem to be protected by console_lock() too, which is probably what papers over any issues. Note that this means we're shuffling around a bit the locking sections for some of the console takeover and unbind paths, but not all: - console binding/unbinding from the console layer never with lock_fb_info - unbind (as opposed to unlink) never bother with lock_fb_info Also the real serialization against set_par and set_pan are still doing by wrapping the entire ioctl code in console_lock(). So this shuffling shouldn't be worse than what we had from a "can you trigger races?" pov, but it's at least clearer. Acked-by:
-
Daniel Vetter authored
No idea why con2fb_acquire_newinfo() initializes much less than fbcon_startup(), but so be it. From a quick look most of the un-initialized stuff should be fairly harmless, but who knows. Note that the error handling for the con2fb_acquire_newinfo() failure case was very strange: Callers updated con2fb_map to the new value before calling this function, but upon error con2fb_acquire_newinfo reset it to the old value. Since I removed the call to fbcon_release anyway that strange error path was sticking out like a sore thumb, hence I removed it. Which also allows us to remove the oldidx parameter from that function. v2: Explain what's going on with oldidx and error paths (Sam) v3: Drop unused variable (0day) v4: Rebased over bisect fix in previous patch, unchagend end result. Acked-by: Sam Ravnborg <sam@ravnborg.org> (v2) Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: kernel test robot <lkp@intel.com> Signed-off-by:
-
Daniel Vetter authored
It doesn't ever fail anymore. Acked-by:
-
Daniel Vetter authored
There's two minor behaviour changes in here: - in error paths we now consistently call fb_ops->fb_release - fb_release really can't fail (fbmem.c ignores it too) and there's no reasonable cleanup we can do anyway. Note that everything in fbcon.c is protected by the big console_lock() lock (especially all the global variables), so the minor changes in ordering of setup/cleanup do not matter. v2: Explain a bit better why this is all correct (Sam) Acked-by:
-
Daniel Vetter authored
It was only used by fbcon, and that now switched to its own, private work. Acked-by:
-
Daniel Vetter authored
It's only one flag and slightly tidier code. Acked-by:
-
Daniel Vetter authored
Allows us to delete a bunch of hand-rolled stuff using a timer plus a separate work). Also to simplify the code we initialize the cursor_work completely when we allocate the fbcon_ops structure, instead of trying to cope with console re-initialization. The motiviation here is that fbcon code stops using the fb_info.queue, which helps with locking issues around cleanup and all that in a later patch. Also note that this allows us to ditch the hand-rolled work cleanup in fbcon_exit - we already call fbcon_del_cursor_timer, which takes care of everything. Plus this was racy anyway. v2: - Only INIT_DELAYED_WORK when kzalloc succeeded (Tetsuo) - Explain that we replace both the timer and a work with the combined delayed_work (Javier) Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
Daniel Vetter authored
fb_set_var requires we hold the fb_info lock. Or at least this now matches what the ioctl does ... Note that ps3fb and sh_mobile_lcdcfb are busted in different ways here, but I will not fix them up. Also in practice this isn't a big deal, because really variable fbdev state is actually protected by console_lock (because fbcon just doesn't bother with lock_fb_info() at all), and lock_fb_info protecting anything is really just a neat lie. But that's a much bigger fish to fry. Acked-by:
-
Daniel Vetter authored
Before commit 6104c370 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Aug 1 17:32:07 2017 +0200 fbcon: Make fbcon a built-time depency for fbdev it was possible to load fbcon and fbdev drivers in any order, which means that fbcon init had to handle the case where fbdev drivers where already registered. This is no longer possible, hence delete that code. Note that the exit case is a bit more complex and will be done in a separate patch. Since I had to audit the entire fbcon load code I also spotted a wrong function name in a comment in fbcon_startup(), which this patch also fixes. v2: Explain why we also fix the comment (Sam) Acked-by:
-
Daniel Vetter authored
Half of it is protected by console_lock, but the other half is a lot more awkward: Registration/deregistration of fbdev are serialized, but we don't really clear out anything in con2fb_map and so there's potential for use-after free mixups. First step is to encapsulate the lookup. Acked-by:
-
Daniel Vetter authored
Avoids two forward declarations, and more importantly, matches what I've done in my fbcon scrolling restore patches - so I need this to avoid a bunch of conflicts in rebasing since we ended up merging Helge's series instead. Acked-by:
-
Daniel Vetter authored
I didn't bother with any code movement to fix the others, these just got a bit in the way. v2: Rebase on top of Helge's reverts. Acked-by:
-
Javier Martinez Canillas authored
The commit 73511edf ("dma-buf: specify usage while adding fences to dma_resv obj v7") ported all the DRM drivers to use the newer fence API that specifies the usage with the enum dma_resv_usage rather than doing an explicit shared / exclusive distinction. But the commit didn't do it properly in two callers of the vc4 driver, leading to build errors. Fixes: 73511edf ("dma-buf: specify usage while adding fences to dma_resv obj v7") Signed-off-by:
-
Chen-Yu Tsai authored
The SINO WEALTH SH1106 is an OLED display driver that is somewhat compatible with the SSD1306. It supports a slightly wider display, at 132 instead of 128 pixels. The basic commands are the same, but the SH1106 doesn't support the horizontal or vertical address modes. Add support for this display driver. The default values for some of the hardware settings are taken from the datasheet. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
-
Chen-Yu Tsai authored
On the SINO WEALTH SH1106, which is mostly compatible with the SSD1306, only the basic page addressing mode is supported. This addressing mode is not as easy to use compared to the currently supported horizontal addressing mode, as the page address has to be set prior to writing out each page, and each page must be written out separately as a result. Also, there is no way to force the column address to wrap around early, thus the column address must also be reset for each page to be accurate. Add support for this addressing mode, with a flag to choose it. This flag is designed to be set from the device info data structure, but can be extended to be explicitly forced on through a device tree property if such a need arises. Signed-off-by:
-
Chen-Yu Tsai authored
The SINO WEALTH SH1106 is an OLED display driver that is somewhat compatible with the SSD1306. It supports a slightly wider display, at 132 instead of 128 pixels. The basic commands are the same, but the SH1106 doesn't support the horizontal or vertical address modes. Add a compatible string for it. Signed-off-by:
-
Chen-Yu Tsai authored
Add a vendor prefix entry for SINO WEALTH Eletronics Ltd. (http://www.sinowealth.com). Signed-off-by:
-
Christian König authored
This isn't included here any more since the removal of ww_mutex.h from seqlock.h which causes a build break. Signed-off-by:
Shashank Sharma <shashank.sharma@amd.com> Fixes: e84815cb ("seqlock: drop seqcount_ww_mutex_t") Link: https://patchwork.freedesktop.org/patch/msgid/20220407114619.961750-1-christian.koenig@amd.com
-
Christian König authored
Daniel pointed out that this series removes the last user of seqcount_ww_mutex_t, so let's drop this. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-16-christian.koenig@amd.com
-
Christian König authored
This should be possible now since we don't have the distinction between exclusive and shared fences any more. The only possible pitfall is that a dma_fence would be reused during the RCU grace period, but even that could be handled with a single extra check. Signed-off-by:
-
Christian König authored
This is now handled by the DMA-buf framework in the dma_resv obj. Also remove the workaround inside VMWGFX to update the moving fence. Signed-off-by:
-
Christian König authored
That should now be handled by the common dma_resv framework. Signed-off-by:
-
Christian König authored
We have previously done that in the individual drivers but it is more defensive to move that into the common code. Dynamic attachments should wait for map operations to complete by themselves. Signed-off-by:
-
Christian König authored
Add an usage for submissions independent of implicit sync but still interesting for memory management. v2: cleanup the kerneldoc a bit v3: separate amdgpu changes from this Signed-off-by:
-
Christian König authored
We only need to wait for kernel submissions here. Signed-off-by:
-
Christian König authored
Always wait for kernel fences before kmap and not only for UVD kmaps. Signed-off-by:
-
Christian König authored
Wait only for kernel fences before kmap or UVD direct submission. This also makes sure that we always wait in amdgpu_bo_kmap() even when returning a cached pointer. Signed-off-by:
-
Christian König authored
Add an usage for kernel submissions. Waiting for those are mandatory for dynamic DMA-bufs. As a precaution this patch also changes all occurrences where fences are added as part of memory management in TTM, VMWGFX and i915 to use the new value because it now becomes possible for drivers to ignore fences with the WRITE usage. v2: use "must" in documentation, fix whitespaces v3: separate out some driver changes and better document why some changes should still be part of this patch. Signed-off-by: -
Christian König authored
Rework the internals of the dma_resv object to allow adding more than one write fence and remember for each fence what purpose it had. This allows removing the workaround from amdgpu which used a container for this instead. Signed-off-by:
-
Christian König authored
Instead of distingting between shared and exclusive fences specify the fence usage while adding fences. Rework all drivers to use this interface instead and deprecate the old one. v2: some kerneldoc comments suggested by Daniel v3: fix a missing case in radeon v4: rebase on nouveau changes, fix lockdep and temporary disable warning v5: more documentation updates v6: separate internal dma_resv changes from this patch, avoids to disable warning temporary, rebase on upstream changes v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl Signed-off-by: -
Christian König authored
This change adds the dma_resv_usage enum and allows us to specify why a dma_resv object is queried for its containing fences. Additional to that a dma_resv_usage_rw() helper function is added to aid retrieving the fences for a read or write userspace submission. This is then deployed to the different query functions of the dma_resv object and all of their users. When the write paratermer was previously true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise. v2: add KERNEL/OTHER in separate patch v3: some kerneldoc suggestions by Daniel v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in the rebase pointed out by Bas. Signed-off-by: -
Julia Lawall authored
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by:
Alain Volmat <alain.volmat@foss.st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220314115354.144023-17-Julia.Lawall@inria.fr
-
Colin Ian King authored
In other places of the driver the string hdmi_rejection_pll is used instead of the truncated hdmi_rejec_pll, so use this string instead to be consistent. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Randy Dunlap authored
Don't mark static functions as kernel-doc. Prevents multiple kernel-doc build warnings: drivers/gpu/drm/sti/sti_hdmi.c:187: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * HDMI interrupt handler threaded drivers/gpu/drm/sti/sti_hdmi.c:219: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * HDMI interrupt handler drivers/gpu/drm/sti/sti_hdmi.c:241: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Set hdmi active area depending on the drm display mode selected drivers/gpu/drm/sti/sti_hdmi.c:262: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Overall hdmi configuration drivers/gpu/drm/sti/sti_hdmi.c:340: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Helper to concatenate infoframe in 32 bits word drivers/gpu/drm/sti/sti_hdmi.c:357: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Helper to write info frame drivers/gpu/drm/sti/sti_hdmi.c:427: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Prepare and configure the AVI infoframe drivers/gpu/drm/sti/sti_hdmi.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Prepare and configure the AUDIO infoframe drivers/gpu/drm/sti/sti_hdmi.c:555: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Software reset of the hdmi subsystem Fixes: 5402626c ("drm: sti: add HDMI driver") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Aditya Srivastava <yashsri421@gmail.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Alain Volmat <alain.volmat@foss.st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Acked-by:
-
