- 24 Jan, 2013 3 commits
-
-
Alan Cox authored
Note a point in the pipe driver that wants future attention Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David 'Digit' Turner authored
A QEMU pipe is a very fast communication channel between the guest system and the emulator. Usage from the guest is simply something like; // connect to special device fd = open("/dev/qemu_pipe", O_RDWR); // tell which service we want to talk to (must be zero-terminated) write(fd, "pipeName", strlen("pipeName")+1); // do read()/write() through fd now ... // close channel close(fd); Signed-off-by:David 'Digit' Turner <digit@android.com> [Added support for parameter buffers for speed] igned-off-by:
Xin, Xiaohui <xiaohui.xin@intel.com> Signed-off-by:
Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by:
Nakajima, Jun <jun.nakajima@intel.com> [Ported to 3.6] Signed-off-by:
Tom Keel <thomas.keel@intel.com> [Ported to 3.7, moved to platform/goldfish] Signed-off-by:
-
Jun Nakajima authored
This imports the current Google code and cleans it up slightly to use pr_ and to properly request its resources. Goldfish is an emulator used for Android development. It has a virtual bus where the emulator passes platform device information to the guest which then creates the appropriate devices. This part of the emulation is not architecture specific so should not be hiding in architecture trees as it does in the Google Android tree. The constants it uses do depend on the platform and the platform creates the bus device which then talks to the emulator to ascertain the actual devices present. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
Bruce Beare <bruce.j.beare@intel.com> [Moved out of x86, cleaned up headers] Signed-off-by:
-
- 22 Jan, 2013 20 commits
-
-
Mark Einon authored
Dan Carpenter has pointed out that there are several sparse warnings from et131x.c, listed below. This patch fixes all these errors. drivers/staging/et131x/et131x.c:1870:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1870:33: expected unsigned int [usertype] *num_des drivers/staging/et131x/et131x.c:1870:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1871:37: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1871:37: expected unsigned int [usertype] *full_offset drivers/staging/et131x/et131x.c:1871:37: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1872:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1872:33: expected unsigned int [usertype] *min_des drivers/staging/et131x/et131x.c:1872:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1873:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1873:33: expected unsigned int [usertype] *base_hi drivers/staging/et131x/et131x.c:1873:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1874:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1874:33: expected unsigned int [usertype] *base_lo drivers/staging/et131x/et131x.c:1874:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1876:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1876:33: expected unsigned int [usertype] *num_des drivers/staging/et131x/et131x.c:1876:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1877:37: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1877:37: expected unsigned int [usertype] *full_offset drivers/staging/et131x/et131x.c:1877:37: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1878:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1878:33: expected unsigned int [usertype] *min_des drivers/staging/et131x/et131x.c:1878:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1879:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1879:33: expected unsigned int [usertype] *base_hi drivers/staging/et131x/et131x.c:1879:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1880:33: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:1880:33: expected unsigned int [usertype] *base_lo drivers/staging/et131x/et131x.c:1880:33: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:1898:24: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:1898:24: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:1898:24: got unsigned int [usertype] *base_hi drivers/staging/et131x/et131x.c:1900:24: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:1900:24: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:1900:24: got unsigned int [usertype] *base_lo drivers/staging/et131x/et131x.c:1901:60: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:1901:60: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:1901:60: got unsigned int [usertype] *num_des drivers/staging/et131x/et131x.c:1902:39: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:1902:39: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:1902:39: got unsigned int [usertype] *full_offset drivers/staging/et131x/et131x.c:1910:24: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:1910:24: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:1910:24: got unsigned int [usertype] *min_des drivers/staging/et131x/et131x.c:2583:32: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:2583:32: expected unsigned int [usertype] *offset drivers/staging/et131x/et131x.c:2583:32: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:2585:32: warning: incorrect type in assignment (different address spaces) drivers/staging/et131x/et131x.c:2585:32: expected unsigned int [usertype] *offset drivers/staging/et131x/et131x.c:2585:32: got unsigned int [noderef] <asn:2>*<noident> drivers/staging/et131x/et131x.c:2602:24: warning: incorrect type in argument 2 (different address spaces) drivers/staging/et131x/et131x.c:2602:24: expected void volatile [noderef] <asn:2>*addr drivers/staging/et131x/et131x.c:2602:24: got unsigned int [usertype] *offset drivers/staging/et131x/et131x.c:4093:13: warning: symbol 'et131x_isr' was not declared. Should it be static? Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Harvey Yang authored
On the client side, we have a virtual hcd driver, there actually no hardware interrupts, so we do not need worry about race conditions caused by irq with spinlock held. Turning off irq is not good for system performance after all. Just replace them with a non interrupt safe version. Signed-off-by:
Harvey Yang <harvey.huawei.yang@gmail.com> Signed-off-by:
-
Harvey Yang authored
The function 'usbip_event_add()' may be called in interrupt context on the stub side: 'stub_complete'->'stub_enqueue_ret_unlink'->'usbip_event_add'. In this function it tries to get the lock 'ud->lock', so we should disable irq when we get this lock in process context. Signed-off-by:
-
Mark Einon authored
In preparation for moving et131x to drivers/net, fixup the block comments to match the preferred networking style - no /* on separate line, but */ are on a seperate line. Signed-off-by:
-
Mark Einon authored
Checkpatch now highlights some camel case flag names. Fix these issues. Also fix some remaining lines > 80chars issues for completeness. Signed-off-by:
-
Mark Einon authored
et131x_get_regs() calls et131x_mii_read(), passing the address of a u32 which is cast to a (u16 *). This works fine for little endian systems, but not for big endian. Change so that the types are cast, not pointers to the types. Reported-by:
-
Devendra Naga authored
the i and j are used in for loop and they assigned to zeros in the for loop, so no need to assign them to zeros again. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
Devendra Naga authored
while proc_create fails, the register_proc_table can do a derefernce of the null pointer causing to oops the system, instead check for a valid pointer at register and unregister Signed-off-by:
-
H Hartley Sweeten authored
The PCI device ids supported by this driver are used multiple places in the code. To improve maintainability, create #define's for them. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
H Hartley Sweeten authored
Change the MODULE_DESCRIPTION to something more useful than the generic "Comedi low-level driver" so that modinfo provides a better description of the driver. Signed-off-by:
-
H Hartley Sweeten authored
This driver does not use any of the functionality provided by comedi_fc.h. Remove the #include. Signed-off-by:
-
H Hartley Sweeten authored
Add the missing copyright information. This information was originally in the hwdrv_apci16xx.c file. Signed-off-by:
-
H Hartley Sweeten authored
The current low-level support code in hwdrv_apci16xx.c is seriously broken. Besides that, it's overly complicated. Rewrite, and simplify, the low-level code so it complies with the comedi API. Signed-off-by:
-
H Hartley Sweeten authored
Change the MODULE_DESCRIPTION to something more useful than the generic "Comedi low-level driver" so that modinfo provides a better description of the driver. Signed-off-by:
-
H Hartley Sweeten authored
The addi-data "common" code always allocated 7 subdevices. This driver only requires 3. Change the allocation and remove the unused subdevices. Update the comments for the initialization of each subdevice. Also, update the subdevice that is passed to addi_watchdog_cleanup() to match the new subdevice number. Signed-off-by:
-
H Hartley Sweeten authored
Add the missing copyright information. This information was originally in the hwdrv_apci2200.c file. Signed-off-by:
-
H Hartley Sweeten authored
This driver does not use any of the support provided by comedi_fc.h. Remove it's include. Signed-off-by:
-
H Hartley Sweeten authored
The boardinfo is not longer needed by this driver. Remove it as well as the addi_find_boardinfo() function. This removes the final ties to the addi-data "common" code so remove the #include for it. Signed-off-by:
-
H Hartley Sweeten authored
The 'devpriv' is not used in this driver. Remove it's allocation in the auto_attach and the check for it in the detach. Signed-off-by:
-
H Hartley Sweeten authored
The current watchdog support in hwdrv_apci2200.c does not conform to the comedi API. Use the addi_watchdog module to provide support for the watchdog subdevice and remove the now unneeded hwdrv_apci2200.c file. Signed-off-by:
-
- 21 Jan, 2013 17 commits
-
-
H Hartley Sweeten authored
comedi_find_board_minor() will always return a ninor number between 0 and < COMEDI_NUM_BOARD_MINORS, or -ENODEV if a minor is not found. Remove the unnecessary BUG_ON(). Signed-off-by:
-
H Hartley Sweeten authored
The postconfig for drivers that support async commands currently can BUG_ON if the subdevice was improperly configured by the driver. Change the BUG_ON so that a dev_warn() is output and the postconfig returns -EINVAL. This will prevent the comedi core from attaching to the faulty driver but does not BUG the kernel. Signed-off-by:
-
H Hartley Sweeten authored
Factor the setup of an async subdevice out of postconfig(). This allows bringing the code back a couple indents and makes the postconfig a bit clearer. For aesthetic reasons, rename postconfig() to __comedi_device_postconfig(). Signed-off-by:
-
H Hartley Sweeten authored
Move a couple of the functions to avoid the need for the forward declarations. Signed-off-by:
-
H Hartley Sweeten authored
There is still a forward declaration in this file for parse_insn(). Remove the need for it by moving do_insnlist_ioctl() down a bit. Signed-off-by:
-
Peter Huewe authored
All pci drivers in drivers/ have the pci_driver.name field set, so we can remove this workaround and the accompanying todo. Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Reviewed-by:
-
Peter Huewe authored
This patch adds the comedi_driver.name to pci_driver.name to the skel driver, so we can remove the workaround in drivers.c Signed-off-by:
-
Peter Huewe authored
Found with coccicheck. The semantic patch that makes this output is available in scripts/coccinelle/misc/boolinit.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/Signed-off-by:
-
Greg Kroah-Hartman authored
Hopefully all of the arch-specific problems are now resolved, so let's let this subsystem be enabled on all arches. If there are problems found, we will fix them up. Cc: Ian Abbott <abbotti@mev.co.uk> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Bernd Porr <mail@berndporr.me.uk> Signed-off-by: -
Ian Abbott authored
Bernd Porr reports success getting comedi to work on ARM. He writes: """ comedi works nicely on the Raspberry PI. I've compiled the rpi kernel with comedi enabled and it works with the USBDUX-sigma (need to test the other boards). With comedirecord running I can plot one channel at 1kHz without buffer overflow (resulting to 70% load). So, I guess we just need to add "ARM" to Kconfig in the comedi subdir? depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86 || ARM I'm running just now 3.2.27 but also the development kernel compiles with ARM enabled (haven't tested yet). /Bernd """ Enable the COMEDI config option to be selected for ARM. Signed-off-by:Ian Abbott <abbotti@mev.co.uk> Cc: Bernd Porr <mail@berndporr.me.uk> Signed-off-by:
-
Julia Lawall authored
Delete successive tests to the same location. There was a previous test on ret and it has not been updated since then. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Chen Gang authored
The fields must be null-terminated, or next strstr in dcd_get_objects, will cause issue additoinal info: nldr_create may call cod_get_base_name, let sz_zl_file to get name (sz_name) and then call dcd_get_objects, passing sz_zl_file as a name string. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Omar Ramirez Luna <omar.ramirez@copitl.com> Signed-off-by:
-
Chen Gang authored
The fields must be null-terminated, or next strcpy in dbll_find_dsp_symbol, will cause issue additoinal info: dbll_find_dsp_symbol call find_symbol_callback to get name. and then call strcpy to copy the name to upper caller. Signed-off-by:
-
Chen Gang authored
strlen_user will return the length including final NUL. and will return 0 if failed (for example: if user string not NUL terminated) so need check whether it is an invalid parameter. addtional info: can reference the comments of strlen_user in lib/strnlen_user.c Signed-off-by: -
Aaro Koskinen authored
Delete redundant field. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
Use pre-calculated register addresses instead of pVBInfo->BaseAddr. Signed-off-by:
-
Aaro Koskinen authored
Avoid copy-paste and use XGIRegInit() to initialize registers addresses. Signed-off-by:
-
