Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2022-04-12

This series contains updates to i40e and ice drivers.

Joe Damato adds TSO support for MPLS packets on i40e and ice drivers. He
also adds tracking and reporting of tx_stopped statistic for i40e.

Nabil S. Alramli adds reporting of tx_restart to ethtool for i40e.

Mateusz adds new device id support for i40e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tls: rx: random refactoring part 3

TLS Rx refactoring. Part 3 of 3. This set is mostly around rx_list
and async processing. The last two patches are minor optimizations.
A couple of features to follow.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

TLS 1.3 and ChaChaPoly don't carry IV in the packet.
The code before this change would copy out iv_size
worth of whatever followed the TLS header in the packet
and then for TLS 1.3 | ChaCha overwrite that with
the sequence number. Waste of cycles especially
with TLS 1.2 being close to dead and TLS 1.3 being
the common case.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IVs are 8 or 16 bytes, no point reading out the exact value
for quantities this small.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Propagating EINPROGRESS thru multiple layers of functions is
error prone. Use darg->async as an in/out argument, like we
use darg->zc today. On input it tells the code if async is
allowed, on output if it took place.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

async crypto handler will report the socket error no need
to report it again. We can, however, let the data we already
copied be reported to user space but we need to make sure
the error will be reported next time around.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

process_rx_list() only fails if it can't copy data to user
space. There is no point recording the error onto sk->sk_err
or giving up on the data which was read partially. Treat
the return value like a normal socket partial read.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If crypto didn't always invoke our callback for async
we'd not be clearing skb->sk and would crash in the
skb core when freeing it. This if must be dead code.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Async crypto never worked with TLS 1.3 and was explicitly disabled in
commit 8497ded2 ("net/tls: Disable async decrytion for tls1.3").
There's no need for us to handle TLS 1.3 padding in the async cb.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move counting TlsDecryptErrors to tls_do_decryption()
where differences between sync and async crypto are
reconciled.

No functional changes, this code just always gave
me a pause.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code is identical, we can save a few LoC.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx_list is protected by the socket lock, no need to take
the built-in spin lock on accesses.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform_get_irq() return negative value on failure, so null check of
return value is incorrect. Fix it by comparing whether it is less than
zero.

Fixes: 9055a2f5 ("ixp4xx_eth: make ptp support a platform driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220412085126.2532924-1-lv.ruyi@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20220412082847.2532584-1-chi.minghao@zte.com.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

XRFM is no longer needed for configuring FOU tunnels
(CONFIG_NET_FOU_IP_TUNNELS), remove from Kconfig.

Also remove the xrfm.h dependency in fou.c. It was
added in '23461551 ("fou: Support for foo-over-udp RX path")'
for depencies of udp_del_offload and udp_offloads, which were removed in
'd92283e3 ("fou: change to use UDP socket GRO")'.

Built and installed kernel and setup GUE/FOU tunnels.
Signed-off-by: Coco Li <lixiaoyan@google.com>
Link: https://lore.kernel.org/r/20220411213717.3688789-1-lixiaoyan@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for Ethernet Connection X722 for 10GbE SFP+ cards.
Make possible for the driver to bind to the card.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add vsi.tx_restart to the i40e driver ethtool statistics
Signed-off-by: Nabil S. Alramli <dev@nalramli.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Track TX queue stop events and export the new stat with ethtool.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Attempt to add mpls+tso support.

I don't have ice hardware available to test myself, but I just implemented
this feature in i40e and thought it might be useful to implement for ice
while this is fresh in my brain.

Hoping some one at intel will be able to test this on my behalf.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Ido Schimmel says:

====================
mlxsw: Extend device registers for line cards support

This patch set prepares mlxsw for line cards support by extending device
registers with a slot index, which allows accessing components found on
a line card at a given slot. Currently, only slot index 0 (main board)
is used.

No user visible changes that I am aware of.
====================

Link: https://lore.kernel.org/r/20220411144657.2655752-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add new field 'max_modules_per_slot' to provide maximum number of
modules that can be connected per slot. This field will always be zero,
if 'slot_index' in query request is set to non-zero value, otherwise
value in this field will provide maximum modules number, which can be
equipped on device inserted at any slot.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pass the slot index down to PMAOS pack helper alongside with the module.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MGPIR (Management General Peripheral Information Register) with
new fields specifying the slot number and number of the slots available
on system. The purpose of these fields is:
- to support access to MPGIR register on modular system for getting the
  number of cages, equipped on the line card, inserted at specified
  slot. In case slot number is set zero, MGPIR will provide the
  information for the main board. For Top of the Rack (non-modular)
  system it will provide the same as before.
- to provide the number of slots supported by system. This data is
  relevant only in case slot number is set zero.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend PMMP (Port Module Memory Map Properties Register) with new
field specifying the slot number. The purpose of this field is to
enable overriding the cable/module memory map advertisement.

For non-modular systems the 'module' number uniquely identifies the
transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MCION (Management Cable IO and Notifications Register) with new
field specifying the slot number. The purpose of this field is to
support access to MCION register for query cage transceiver on modular
system.

For non-modular systems the 'module' number uniquely identifies the
transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MCIA (Management Cable Info Access Register) with new field
specifying the slot number. The purpose of this field is to support
access to MCIA register for reading cage cable information on modular
system. For non-modular systems the 'module' number uniquely identifies
the transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MTBR (Management Temperature Bulk Register) with new field
specifying the slot number. The purpose of this field is to support
access to MTBR register for reading temperature sensors on modular
system. For non-modular systems the 'sensor_index' uniquely identifies
the cage sensors. For modular systems the sensors are identified by two
indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'sensor_index', specifying cage sensor within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Extend MTMP (Management Temperature Register) with new field specifying
the slot index. The purpose of this field is to support access to MTMP
register for reading temperature sensors on modular systems.
For non-modular systems the 'sensor_index' uniquely identifies the cage
sensors, while 'slot_index' is always 0. For modular systems the
sensors are identified by:
- 'slot_index', specifying the slot index, where line card is located;
- 'sensor_index', specifying cage sensor within the line card.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This change adds support for TSO of MPLS packets.

In my tests with tcpdump it seems to work. Note this test setup has
a 9000 byte MTU:

MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234:
  Flags [P.], seq 593345:644401, ack 0, win 420,
  options [nop,nop,TS val 45022534 ecr 1722291395], length 51056

IP dstip.1234 > srcip.50086: Flags [.], ack 593345, win 122,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

IP dstip.1234 > srcip.50086: Flags [.], ack 602289, win 105,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

IP dstip.1234 > srcip.50086: Flags [.], ack 620177, win 71,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

MPLS (label 100, exp 0, [S], ttl 64) IP srcip.50086 > dstip.1234:
  Flags [P.], seq 644401:655953, ack 0, win 420,
  options [nop,nop,TS val 45022534 ecr 1722291395], length 11552

IP dstip.1234 > srcip.50086: Flags [.], ack 638065, win 37,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

IP dstip.1234 > srcip.50086: Flags [.], ack 644401, win 25,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

IP dstip.1234 > srcip.50086: Flags [.], ack 653345, win 8,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0

IP dstip.1234 > srcip.50086: Flags [.], ack 655953, win 3,
  options [nop,nop,TS val 1722291395 ecr 45022534], length 0
Signed-off-by: Joe Damato <jdamato@fastly.com>
Co-developed-by: Mike Gallo <mgallo@fastly.com>
Signed-off-by: Mike Gallo <mgallo@fastly.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add missing recycle stats to page_pool_put_page_bulk routine.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/3712178b51c007cfaed910ea80e68f00c916b1fa.1649685634.git.lorenzo@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f06 ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().

Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.

err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
                           flags & ~MSG_DONTWAIT, &addr_len);

or in

err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
                      sk, msg, size, flags & MSG_DONTWAIT,
                      flags & ~MSG_DONTWAIT, &addr_len);

instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add the following Telit FN980 composition:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220411135943.4067264-1-dnlplm@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Martin Habets says:

====================
sfc: Remove some global definitions

These are some small cleanups to remove definitions that need not
be defined in .h files.
====================

Link: https://lore.kernel.org/r/164967635861.17602.16525009567130361754.stgit@palantir17.mph.netSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The strings are only used in efx_common.c so the definitions
can be static in there.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

It is defined both in efx.h and tx_common.h.
Remove the definition in efx.h.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This means we can remove them from efx_channel.h and avoid
naming conflicts later.
efx_channel_dummy_op_void() cannot be static as it is
used in ef100_nic.c.
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Russell King says:

====================
net: dsa: mt7530: updates for phylink changes

This revised series is a partial conversion of the mt7530 DSA driver to
the modern phylink infrastructure. This driver has some exceptional
cases which prevent - at the moment - its full conversion (particularly
with the Autoneg bit) to using phylink_generic_validate().

Patch 1 fixes the incorrect test highlighted in the first RFC series.

Patch 2 fixes the incorrect assumption that RGMII is unable to support
1000BASE-X.

Patch 3 populates the supported_interfaces for each port

Patch 4 removes the interface checks that become unnecessary as a result
of patch 3.

Patch 5 removes use of phylink_helper_basex_speed() which is no longer
required by phylink.

Patch 6 becomes possible after patch 5, only indicating the ethtool
modes that can be supported with a particular interface mode - this
involves removing some modes and adding others as per phylink
documentation.

Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
the driver as close as we can to phylink_generic_validate() due to the
Autoneg bit issue mentioned above.

Patch 8 converts the driver to the phylink pcs support, removing a bunch
of driver private indirected methods. We include TRGMII as a PCS even
though strictly TRGMII does not have a PCS. This is convenient to allow
the change in patch 9 to be made.

Patch 9 moves the special autoneg handling to the PCS validate method,
which means we can convert the MAC side to the generic validator.

Patch 10 marks the driver as non-legacy.

The series was posted on 23 February, and a ping sent on 3 March, but
no feedback has been received. The previous posting also received no
feedback on the actual patches either.

v2:
- fix build issue in patch 5
- add Marek's tested-by

 drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
 drivers/net/dsa/mt7530.h |  26 ++--
 2 files changed, 159 insertions(+), 197 deletions(-)
====================

Link: https://lore.kernel.org/r/YlP4vGKVrlIJUUHK@shell.armlinux.org.ukSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The mt7530 driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Move the autoneg bit handling to the PCS validation, which allows us to
get rid of mt753x_phylink_validate() and rely on the default
phylink_generic_validate() implementation for the MAC side.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Partially convert the mt7530 driver to use phylink's PCS support. This
is a partial implementation as we don't move anything into the
pcs_config method yet - this driver supports SGMII or 1000BASE-X
without in-band.
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>