[ Upstream commit 7744b5f3 ]

This patch fixes two issues in UDP checksum computation in pktgen.

First, the pseudo-header uses the source and destination IP
addresses. Currently, the ports are used for IPv4.

Second, the UDP checksum covers both header and data.  So we need to
generate the data earlier (move pktgen_finalize_skb up), and compute
the checksum for UDP header + data.

Fixes: c26bf4a5 ("pktgen: Add UDPCSUM flag to support UDP checksums")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 11b1f828 ]

We still need a validate_link_af() handler with an appropriate nla policy,
similarly as we have in IPv4 case, otherwise size validations are not being
done properly in that case.

Fixes: f53adae4 ("net: ipv6: add tokenized interface identifier support")
Fixes: bc91b0f0 ("ipv6: addrconf: implement address generation modes")
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 233c96fc ]

flow_cache_flush_task references a structure member flow_cache_gc_work
where it should reference flow_cache_flush_task instead.

Kernel panic occurs on kernels using IPsec during XFRM garbage
collection. The garbage collection interval can be shortened using the
following sysctl settings:

net.ipv4.xfrm4_gc_thresh=4
net.ipv6.xfrm6_gc_thresh=4

With the default settings, our productions servers crash approximately
once a week. With the settings above, they crash immediately.

Fixes: ca925cf1 ("flowcache: Make flow cache name space aware")
Reported-by: Tomáš Charvát <tc@excello.cz>
Tested-by: Jan Hejl <jh@excello.cz>
Signed-off-by: Miroslav Urbanek <mu@miroslavurbanek.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ee07612 upstream.

ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)

Change the ppc/kvm code to replace ACCESS_ONCE with READ_ONCE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit da1a288d upstream.

ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)

Change the ppc/hugetlbfs code to replace ACCESS_ONCE with READ_ONCE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 38c5ce93 upstream.

ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)

Fixup gup_pmd_range.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 378af02b upstream.

Commit 927609d6 ("kernel: tighten rules for ACCESS ONCE") results in a
compile failure for sh builds with CONFIG_X2TLB enabled.

arch/sh/mm/gup.c: In function 'gup_get_pte':
arch/sh/mm/gup.c:20:2: error: invalid initializer
make[1]: *** [arch/sh/mm/gup.o] Error 1

Replace ACCESS_ONCE with READ_ONCE to fix the problem.

Fixes: 927609d6 ("kernel: tighten rules for ACCESS ONCE")
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b10a0819 upstream.

Currently maximum space limit quota format supports is in blocks however
since we store space limits in bytes, this is somewhat confusing. So
store the maximum limit in bytes as well. Also rename the field to match
the new unit and related inode field to match the new naming scheme.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1760f1eb upstream.

ACCESS_ONCE does not work reliably on non-scalar types. For
example gcc 4.6 and 4.7 might remove the volatile tag for such
accesses during the SRA (scalar replacement of aggregates) step
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)

Change the p2m code to replace ACCESS_ONCE with READ_ONCE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d6abfdb2 upstream.

Paravirt spinlock clears slowpath flag after doing unlock.
As explained by Linus currently it does:

                prev = *lock;
                add_smp(&lock->tickets.head, TICKET_LOCK_INC);

                /* add_smp() is a full mb() */

                if (unlikely(lock->tickets.tail & TICKET_SLOWPATH_FLAG))
                        __ticket_unlock_slowpath(lock, prev);

which is *exactly* the kind of things you cannot do with spinlocks,
because after you've done the "add_smp()" and released the spinlock
for the fast-path, you can't access the spinlock any more.  Exactly
because a fast-path lock might come in, and release the whole data
structure.

Linus suggested that we should not do any writes to lock after unlock(),
and we can move slowpath clearing to fastpath lock.

So this patch implements the fix with:

 1. Moving slowpath flag to head (Oleg):
    Unlocked locks don't care about the slowpath flag; therefore we can keep
    it set after the last unlock, and clear it again on the first (try)lock.
    -- this removes the write after unlock. note that keeping slowpath flag would
    result in unnecessary kicks.
    By moving the slowpath flag from the tail to the head ticket we also avoid
    the need to access both the head and tail tickets on unlock.

 2. use xadd to avoid read/write after unlock that checks the need for
    unlock_kick (Linus):
    We further avoid the need for a read-after-release by using xadd;
    the prev head value will include the slowpath flag and indicate if we
    need to do PV kicking of suspended spinners -- on modern chips xadd
    isn't (much) more expensive than an add + load.

Result:
 setup: 16core (32 cpu +ht sandy bridge 8GB 16vcpu guest)
 benchmark overcommit %improve
 kernbench  1x           -0.13
 kernbench  2x            0.02
 dbench     1x           -1.77
 dbench     2x           -0.63

[Jeremy: Hinted missing TICKET_LOCK_INC for kick]
[Oleg: Moved slowpath flag to head, ticket_equals idea]
[PeterZ: Added detailed changelog]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: a.ryabinin@samsung.com
Cc: dave@stgolabs.net
Cc: hpa@zytor.com
Cc: jasowang@redhat.com
Cc: jeremy@goop.org
Cc: paul.gortmaker@windriver.com
Cc: riel@redhat.com
Cc: tglx@linutronix.de
Cc: waiman.long@hp.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20150215173043.GA7471@linux.vnet.ibm.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dd369297 upstream.

The use of READ_ONCE() causes lots of warnings witht he pending paravirt
spinlock fixes, because those ends up having passing a member to a
'const' structure to READ_ONCE().

There should certainly be nothing wrong with using READ_ONCE() with a
const source, but the helper function __read_once_size() would cause
warnings because it would drop the 'const' qualifier, but also because
the destination would be marked 'const' too due to the use of 'typeof'.

Use a union of types in READ_ONCE() to avoid this issue.

Also make sure to use parenthesis around the macro arguments to avoid
possible operator precedence issues.
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c5b19946 upstream.

Commit 927609d6 ("kernel: tighten rules for ACCESS ONCE") results in
sparse warnings like "Using plain integer as NULL pointer" - Let's add a
type cast to the dummy assignment.
To avoid warnings lik "sparse: warning: cast to restricted __hc32" we also
use __force on that cast.

Fixes: 927609d6 ("kernel: tighten rules for ACCESS ONCE")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 927609d6 upstream.

Now that all non-scalar users of ACCESS_ONCE have been converted
to READ_ONCE or ASSIGN once, lets tighten ACCESS_ONCE to only
work on scalar types.
This variant was proposed by Alexei Starovoitov.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b43d712 upstream.

pmc_dbgfs_unregister() will be called when pmc->dbgfs_dir is unconditionally
NULL on error path in pmc_dbgfs_register(). To prevent this we move the
assignment to where is should be.

Fixes: f855911c (x86/pmc_atom: Expose PMC device state and platform sleep state)
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aubrey Li <aubrey.li@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Kumar P. Mahesh <mahesh.kumar.p@intel.com>
Link: http://lkml.kernel.org/r/1421253575-22509-2-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1ea76fba upstream.

Commit b568b860 ("Treat SCI interrupt as normal GSI interrupt")
accidently removes support of legacy PIC interrupt when fixing a
regression for Xen, which causes a nasty regression on HP/Compaq
nc6000 where we fail to register the ACPI interrupt, and thus
lose eg. thermal notifications leading a potentially overheated
machine.

So reintroduce support of legacy PIC based ACPI SCI interrupt.
Reported-by: Ville Syrjälä <syrjala@sci.fi>
Tested-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: linux-pm@vger.kernel.org
Link: http://lkml.kernel.org/r/1424052673-22974-1-git-send-email-jiang.liu@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4e7c22d4 upstream.

The issue is that the stack for processes is not properly randomized on
64 bit architectures due to an integer overflow.

The affected function is randomize_stack_top() in file
"fs/binfmt_elf.c":

  static unsigned long randomize_stack_top(unsigned long stack_top)
  {
           unsigned int random_variable = 0;

           if ((current->flags & PF_RANDOMIZE) &&
                   !(current->personality & ADDR_NO_RANDOMIZE)) {
                   random_variable = get_random_int() & STACK_RND_MASK;
                   random_variable <<= PAGE_SHIFT;
           }
           return PAGE_ALIGN(stack_top) + random_variable;
           return PAGE_ALIGN(stack_top) - random_variable;
  }

Note that, it declares the "random_variable" variable as "unsigned int".
Since the result of the shifting operation between STACK_RND_MASK (which
is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64):

	  random_variable <<= PAGE_SHIFT;

then the two leftmost bits are dropped when storing the result in the
"random_variable". This variable shall be at least 34 bits long to hold
the (22+12) result.

These two dropped bits have an impact on the entropy of process stack.
Concretely, the total stack entropy is reduced by four: from 2^28 to
2^30 (One fourth of expected entropy).

This patch restores back the entropy by correcting the types involved
in the operations in the functions randomize_stack_top() and
stack_maxrandom_size().

The successful fix can be tested with:

  $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done
  7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0                          [stack]
  7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0                          [stack]
  7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0                          [stack]
  7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0                          [stack]
  ...

Once corrected, the leading bytes should be between 7ffc and 7fff,
rather than always being 7fff.
Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Signed-off-by: Ismael Ripoll <iripoll@upv.es>
[ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: CVE-2015-1593
Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.netSigned-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 96738c69 upstream.

Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 045c47ca upstream.

When reading blkio.throttle.io_serviced in a recently created blkio
cgroup, it's possible to race against the creation of a throttle policy,
which delays the allocation of stats_cpu.

Like other functions in the throttle code, just checking for a NULL
stats_cpu prevents the following oops caused by that race.

[ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020
[ 1117.285252] Faulting instruction address: 0xc0000000003efa2c
[ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV
[ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4
[ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5
[ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000
[ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980
[ 1137.734202] REGS: c000000f1d213500 TRAP: 0300   Not tainted  (3.19.0)
[ 1137.734230] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI>  CR: 42008884  XER: 20000000
[ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0
GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000
GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000
GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808
GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000
GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80
GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850
[ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180
[ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180
[ 1137.734943] Call Trace:
[ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable)
[ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0
[ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70
[ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150
[ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50
[ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510
[ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200
[ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80
[ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0
[ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100
[ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98
[ 1137.735383] Instruction dump:
[ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24
[ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018

And here is one code that allows to easily reproduce this, although this
has first been found by running docker.

void run(pid_t pid)
{
	int n;
	int status;
	int fd;
	char *buffer;
	buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE);
	n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid);
	fd = open(CGPATH "/test/tasks", O_WRONLY);
	write(fd, buffer, n);
	close(fd);
	if (fork() > 0) {
		fd = open("/dev/sda", O_RDONLY | O_DIRECT);
		read(fd, buffer, 512);
		close(fd);
		wait(&status);
	} else {
		fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY);
		n = read(fd, buffer, BUFFER_SIZE);
		close(fd);
	}
	free(buffer);
	exit(0);
}

void test(void)
{
	int status;
	mkdir(CGPATH "/test", 0666);
	if (fork() > 0)
		wait(&status);
	else
		run(getpid());
	rmdir(CGPATH "/test");
}

int main(int argc, char **argv)
{
	int i;
	for (i = 0; i < NR_TESTS; i++)
		test();
	return 0;
}
Reported-by: Ricardo Marin Matinata <rmm@br.ibm.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1a4bcf47 upstream.

We have a scenario where after the fsync log replay we can lose file data
that had been previously fsync'ed if we added an hard link for our inode
and after that we sync'ed the fsync log (for example by fsync'ing some
other file or directory).

This is because when adding an hard link we updated the inode item in the
log tree with an i_size value of 0. At that point the new inode item was
in memory only and a subsequent fsync log replay would not make us lose
the file data. However if after adding the hard link we sync the log tree
to disk, by fsync'ing some other file or directory for example, we ended
up losing the file data after log replay, because the inode item in the
persisted log tree had an an i_size of zero.

This is easy to reproduce, and the following excerpt from my test for
xfstests shows this:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create one file with data and fsync it.
  # This made the btrfs fsync log persist the data and the inode metadata with
  # a correct inode->i_size (4096 bytes).
  $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 4K 0 4K" -c "fsync" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Now add one hard link to our file. This made the btrfs code update the fsync
  # log, in memory only, with an inode metadata having a size of 0.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link

  # Now force persistence of the fsync log to disk, for example, by fsyncing some
  # other file.
  touch $SCRATCH_MNT/bar
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar

  # Before a power loss or crash, we could read the 4Kb of data from our file as
  # expected.
  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After the fsync log replay, because the fsync log had a value of 0 for our
  # inode's i_size, we couldn't read anymore the 4Kb of data that we previously
  # wrote and fsync'ed. The size of the file became 0 after the fsync log replay.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

Another alternative test, that doesn't need to fsync an inode in the same
transaction it was created, is:

  _scratch_mkfs >> $seqres.full 2>&1
  _init_flakey
  _mount_flakey

  # Create our test file with some data.
  $XFS_IO_PROG -f -c "pwrite -S 0xaa -b 8K 0 8K" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Make sure the file is durably persisted.
  sync

  # Append some data to our file, to increase its size.
  $XFS_IO_PROG -f -c "pwrite -S 0xcc -b 4K 8K 4K" \
       $SCRATCH_MNT/foo | _filter_xfs_io

  # Fsync the file, so from this point on if a crash/power failure happens, our
  # new data is guaranteed to be there next time the fs is mounted.
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo

  # Add one hard link to our file. This made btrfs write into the in memory fsync
  # log a special inode with generation 0 and an i_size of 0 too. Note that this
  # didn't update the inode in the fsync log on disk.
  ln $SCRATCH_MNT/foo $SCRATCH_MNT/foo_link

  # Now make sure the in memory fsync log is durably persisted.
  # Creating and fsync'ing another file will do it.
  touch $SCRATCH_MNT/bar
  $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/bar

  # As expected, before the crash/power failure, we should be able to read the
  # 12Kb of file data.
  echo "File content before:"
  od -t x1 $SCRATCH_MNT/foo

  # Simulate a crash/power loss.
  _load_flakey_table $FLAKEY_DROP_WRITES
  _unmount_flakey

  _load_flakey_table $FLAKEY_ALLOW_WRITES
  _mount_flakey

  # After mounting the fs again, the fsync log was replayed.
  # The btrfs fsync log replay code didn't update the i_size of the persisted
  # inode because the inode item in the log had a special generation with a
  # value of 0 (and it couldn't know the correct i_size, since that inode item
  # had a 0 i_size too). This made the last 4Kb of file data inaccessible and
  # effectively lost.
  echo "File content after:"
  od -t x1 $SCRATCH_MNT/foo

This isn't a new issue/regression. This problem has been around since the
log tree code was added in 2008:

  Btrfs: Add a write ahead tree log to optimize synchronous operations
  (commit e02119d5)

Test cases for xfstests follow soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 381cf658 upstream.

If btrfs_find_item is called with NULL path it allocates one locally but
does not free it. Affected paths are inserting an orphan item for a file
and for a subvol root.

Move the path allocation to the callers.

Fixes: 3f870c28 ("btrfs: expand btrfs_find_item() to include find_orphan_item functionality")
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5efa0490 upstream.

This has been confusing people for too long, the message is really just
informative.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7eb71e03 upstream.

It turns out it's possible to get __remove_osd() called twice on the
same OSD.  That doesn't sit well with rb_erase() - depending on the
shape of the tree we can get a NULL dereference, a soft lockup or
a random crash at some point in the future as we end up touching freed
memory.  One scenario that I was able to reproduce is as follows:

            <osd3 is idle, on the osd lru list>
<con reset - osd3>
con_fault_finish()
  osd_reset()
                              <osdmap - osd3 down>
                              ceph_osdc_handle_map()
                                <takes map_sem>
                                kick_requests()
                                  <takes request_mutex>
                                  reset_changed_osds()
                                    __reset_osd()
                                      __remove_osd()
                                  <releases request_mutex>
                                <releases map_sem>
    <takes map_sem>
    <takes request_mutex>
    __kick_osd_requests()
      __reset_osd()
        __remove_osd() <-- !!!

A case can be made that osd refcounting is imperfect and reworking it
would be a proper resolution, but for now Sage and I decided to fix
this by adding a safe guard around __remove_osd().

Fixes: http://tracker.ceph.com/issues/8087

Cc: Sage Weil <sage@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4690555e upstream.

Since kernel 3.14 the backlight control has been broken on various Samsung
Atom based netbooks. This has been bisected and this problem happens since
commit b35684b8 ("drm/i915: do full backlight setup at enable time")

This has been reported and discussed in detail here:
http://lists.freedesktop.org/archives/intel-gfx/2014-July/049395.html

Unfortunately no-one has been able to fix this. This only affects Samsung
Atom netbooks, and the Linux kernel and the BIOS of those laptops have never
worked well together. All affected laptops already have a quirk to avoid using
the standard acpi-video interface and instead use the samsung specific SABI
interface which samsung-laptop uses. It seems that recent fixes to the i915
driver have also broken backlight control through the SABI interface.

The intel_backlight driver OTOH works fine, and also allows for finer grained
backlight control. So add a new use_native_backlight quirk, and replace the
broken_acpi_video quirk with this quirk for affected models. This new quirk
disables acpi-video as before and also stops samsung-laptop from registering
the SABI based samsung_laptop backlight interface, leaving only the working
intel_backlight interface.

This commit enables this new quirk for 3 models which are known to be affected,
chances are that it needs to be used on other models too.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1094948 # N145P
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1115713 # N250P
Reported-by: Bertrik Sikken <bertrik@sikken.nl> # N150P
Cc: stable@vger.kernel.org # 3.16
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 164c2406 upstream.

sm->offset maybe wrong but magic maybe right, the offset do not have CRC.

Badness at c00c7580 [verbose debug info unavailable]
NIP: c00c7580 LR: c00c718c CTR: 00000014
REGS: df07bb40 TRAP: 0700   Not tainted  (2.6.34.13-WR4.3.0.0_standard)
MSR: 00029000 <EE,ME,CE>  CR: 22084f84  XER: 00000000
TASK = df84d6e0[908] 'mount' THREAD: df07a000
GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041
GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000
GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0
GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730
NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638
LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638
Call Trace:
[df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable)
[df07bc90] [c00c7708] __get_free_pages+0x20/0x48
[df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec
[df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0
[df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4
[df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260
[df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184
[df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec
[df07be20] [c033596c] get_sb_mtd+0x84/0x1e8
[df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c
[df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8
[df07bea0] [c0103a58] do_kern_mount+0x40/0x100
[df07bec0] [c011fe90] do_mount+0x240/0x890
[df07bf10] [c0120570] sys_mount+0x90/0xd8
[df07bf40] [c00110d8] ret_from_syscall+0x0/0x4

=== Exception: c01 at 0xff61a34
    LR = 0x100135f0
Instruction dump:
38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28
3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001
mount: mounting /dev/mtdblock3 on /common failed: Input/output error
Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0c510cc8 upstream.

When DRAM errors occur on memory controllers after EDAC_MAX_MCS (16),
the kernel fatally dereferences unallocated structures, see splat below;
this occurs on at least NumaConnect systems.

Fix by checking if a memory controller info structure was found.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000320
IP: [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
PGD 2f8b5a3067 PUD 2f8b5a2067 PMD 0
Oops: 0000 [#2] SMP
Modules linked in:
CPU: 224 PID: 11930 Comm: stream_c.exe.gn Tainted: G   D    3.19.0 #1
Hardware name: Supermicro H8QGL/H8QGL, BIOS 3.5b    01/28/2015
task: ffff8807dbfb8c00 ti: ffff8807dd16c000 task.ti: ffff8807dd16c000
RIP: 0010:[<ffffffff819f714f>] [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
RSP: 0000:ffff8907dfc03c48 EFLAGS: 00010297
RAX: 0000000000000001 RBX: 9c67400010080a13 RCX: 0000000000001dc6
RDX: 000000001dc61dc6 RSI: ffff8907dfc03df0 RDI: 000000000000001c
RBP: ffff8907dfc03ce8 R08: 0000000000000000 R09: 0000000000000022
R10: ffff891fffa30380 R11: 00000000001cfc90 R12: 0000000000000008
R13: 0000000000000000 R14: 000000000000001c R15: 00009c6740001000
FS: 00007fa97ee18700(0000) GS:ffff8907dfc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000320 CR3: 0000003f889b8000 CR4: 00000000000407e0
Stack:
 0000000000000000 ffff8907dfc03df0 0000000000000008 9c67400010080a13
 000000000000001c 00009c6740001000 ffff8907dfc03c88 ffffffff810e4f9a
 ffff8907dfc03ce8 ffffffff81b375b9 0000000000000000 0000000000000010
Call Trace:
 <IRQ>
 ? vprintk_default
 ? printk
 amd_decode_mce
 notifier_call_chain
 atomic_notifier_call_chain
 mce_log
 machine_check_poll
 mce_timer_fn
 ? mce_cpu_restart
 call_timer_fn.isra.29
 run_timer_softirq
 __do_softirq
 irq_exit
 smp_apic_timer_interrupt
 apic_timer_interrupt
 <EOI>
 ? down_read_trylock
 __do_page_fault
 ? __schedule
 do_page_fault
 page_fault
Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Link: http://lkml.kernel.org/r/1424144078-24589-1-git-send-email-daniel@numascale.com
[ Boris: massage commit message ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 11249e73 upstream.

d0585cd8 ("sb_edac: Claim a different PCI device") changed the
probing of sb_edac to look for PCI device 0x3ca0:

3f:0e.0 System peripheral: Intel Corporation Xeon E5/Core i7 Processor Home Agent (rev 07)
00: 86 80 a0 3c 00 00 00 00 07 00 80 08 00 00 80 00
...

but we're matching for 0x3ca8, i.e. PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA
in sbridge_probe() therefore the probing fails.

Changing it to probe for 0x3ca0 (PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0),
.i.e., the 14.0 device, fixes the issue and driver loads successfully
again:

[ 2449.013120] EDAC DEBUG: sbridge_init:
[ 2449.017029] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.022368] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca0
[ 2449.028498] EDAC sbridge: Seeking for: PCI ID 8086:3ca0
[ 2449.033768] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
[ 2449.039028] EDAC DEBUG: sbridge_get_onedevice: Detected 8086:3ca8
[ 2449.045155] EDAC sbridge: Seeking for: PCI ID 8086:3ca8
...

Add a debug printk while at it to be able to catch the failure in the
future and dump driver version on successful load.

Fixes: d0585cd8 ("sb_edac: Claim a different PCI device")
Acked-by: Aristeu Rozanski <aris@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d1901ef0 upstream.

When a drive is marked write-mostly it should only be the
target of reads if there is no other option.

This behaviour was broken by

commit 9dedf603
    md/raid1: read balance chooses idlest disk for SSD

which causes a write-mostly device to be *preferred* is some cases.

Restore correct behaviour by checking and setting
best_dist_disk and best_pending_disk rather than best_disk.

We only need to test one of these as they are both changed
from -1 or >=0 at the same time.

As we leave min_pending and best_dist unchanged, any non-write-mostly
device will appear better than the write-mostly device.
Reported-by: Tomáš Hodek <tomas.hodek@volny.cz>
Reported-by: Dark Penguin <darkpenguin@yandex.ru>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: http://marc.info/?l=linux-raid&m=135982797322422
Fixes: 9dedf603Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 26ac1073 upstream.

Commit a7854487:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.
Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 48536c91 upstream.

Commit f6edb53c converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:

$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]

Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.

Needs to go to 3.18 stable tree as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d4a19eb3 upstream.

We have two race conditions in the probe code which could lead to a null
pointer dereference in the interrupt handler.

The interrupt handler accesses the clockevent device, which may not yet be
registered.

First race condition happens when the interrupt handler gets registered before
the interrupts get disabled. The second race condition happens when the
interrupts get enabled, but the clockevent device is not yet registered.

Fix that by disabling the interrupts before we register the interrupt and enable
the interrupts after the clockevent device got registered.
Reported-by: Gongbae Park <yongbae2@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c2996cb2 upstream.

The KSTK_EIP() and KSTK_ESP() macros should return the user program
counter (PC) and stack pointer (A0StP) of the given task. These are used
to determine which VMA corresponds to the user stack in
/proc/<pid>/maps, and for the user PC & A0StP in /proc/<pid>/stat.

However for Meta the PC & A0StP from the task's kernel context are used,
resulting in broken output. For example in following /proc/<pid>/maps
output, the 3afff000-3b021000 VMA should be described as the stack:

  # cat /proc/self/maps
  ...
  100b0000-100b1000 rwxp 00000000 00:00 0          [heap]
  3afff000-3b021000 rwxp 00000000 00:00 0

And in the following /proc/<pid>/stat output, the PC is in kernel code
(1074234964 = 0x40078654) and the A0StP is in the kernel heap
(1335981392 = 0x4fa17550):

  # cat /proc/self/stat
  51 (cat) R ... 1335981392 1074234964 ...

Fix the definitions of KSTK_EIP() and KSTK_ESP() to use
task_pt_regs(tsk)->ctx rather than (tsk)->thread.kernel_context. This
gets the registers from the user context stored after the thread info at
the base of the kernel stack, which is from the last entry into the
kernel from userland, regardless of where in the kernel the task may
have been interrupted, which results in the following more correct
/proc/<pid>/maps output:

  # cat /proc/self/maps
  ...
  0800b000-08070000 r-xp 00000000 00:02 207        /lib/libuClibc-0.9.34-git.so
  ...
  100b0000-100b1000 rwxp 00000000 00:00 0          [heap]
  3afff000-3b021000 rwxp 00000000 00:00 0          [stack]

And /proc/<pid>/stat now correctly reports the PC in libuClibc
(134320308 = 0x80190b4) and the A0StP in the [stack] region (989864576 =
0x3b002280):

  # cat /proc/self/stat
  51 (cat) R ... 989864576 134320308 ...
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dfcc70a8 upstream.

For filesystems without separate project quota inode field in the
superblock we just reuse project quota file for group quotas (and vice
versa) if project quota file is allocated and we need group quota file.
When we reuse the file, quota structures on disk suddenly have wrong
type stored in d_flags though. Nobody really cares about this (although
structure type reported to userspace was wrong as well) except
that after commit 14bf61ff (quota: Switch ->get_dqblk() and
->set_dqblk() to use bytes as space units) assertion in
xfs_qm_scall_getquota() started to trigger on xfs/106 test (apparently I
was testing without XFS_DEBUG so I didn't notice when submitting the
above commit).

Fix the problem by properly resetting ddq->d_flags when running quotacheck
for a quota file.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f97c20e upstream.

The gpio_chip operations receive a pointer the gpio_chip struct which is
contained in the driver's private struct, yet the container_of call in those
functions point to the mfd struct defined in include/linux/mfd/tps65912.h.
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9cf75e9e upstream.

The change:

7b8792bb
gpiolib: of: Correct error handling in of_get_named_gpiod_flags

assumed that only one gpio-chip is registred per of-node.
Some drivers register more than one chip per of-node, so
adjust the matching function of_gpiochip_find_and_xlate to
not stop looking for chips if a node-match is found and
the translation fails.

Fixes: 7b8792bb ("gpiolib: of: Correct error handling in of_get_named_gpiod_flags")
Signed-off-by: Hans Holmberg <hans.holmberg@intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d42d48a upstream.

The native (64-bit) sigval_t union contains sival_int (32-bit) and
sival_ptr (64-bit). When a compat application invokes a syscall that
takes a sigval_t value (as part of a larger structure, e.g.
compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t
union is converted to the native sigval_t with sival_int overlapping
with either the least or the most significant half of sival_ptr,
depending on endianness. When the corresponding signal is delivered to a
compat application, on big endian the current (compat_uptr_t)sival_ptr
cast always returns 0 since sival_int corresponds to the top part of
sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int
is copied to the compat_siginfo_t structure.
Reported-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Tested-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a52d2093 upstream.

Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped
working. This patch enables the "replacement" for REGULATOR_DUMMY and
allows the touchscreen to work even though there is no regulator for "vcc".
Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 428d53be upstream.

We have to delete the allocated interrupt info if __inject_vm() fails.

Otherwise user space can keep flooding kvm with floating interrupts and
provoke more and more memory leaks.
Reported-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8e2207cd upstream.

If a vm with no VCPUs is created, the injection of a floating irq
leads to an endless loop in the kernel.

Let's skip the search for a destination VCPU for a floating irq if no
VCPUs were created.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0ac96caf upstream.

The hrtimer that handles the wait with enabled timer interrupts
should not be disturbed by changes of the host time.

This patch changes our hrtimer to be based on a monotonic clock.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>