- 25 Nov, 2013 5 commits
-
-
Johannes Berg authored
When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Cc: stable@vger.kernel.org Fixes: 5fe231e8 ("cfg80211: vastly simplify locking") Reported-and-tested-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Janusz Dziedzic authored
Setup chandef for radar event correctly, before we will clear this in ieee80211_dfs_cac_cancel() function. Without this patch mac80211 will report wrong channel width in case we will get radar event during active CAC. Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
Simon Wunderlich authored
The wext internal chandefs for ibss should be created using the cfg80211_chandef_create() functions. Initializing fields manually is error-prone. Reported-by:
Dirk Gouders <dirk@gouders.net> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Jouni Malinen authored
The earlier addition of rt_tsft to struct hwsim_radiotap_hdr updated only mac80211_hwsim_monitor_tx() to fill in the new field. mac80211_hwsim_monitor_ack() did not set the rt_tsft field and as such, leaked eight bytes of kernel memory to user space. In addition, the resulting radiotap header is invalid since the field offsets do not match. Fix these issues by defining a separate radiotap header structure for the ACK frame case which does not use all the fields. Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
-
Bob Copeland authored
This reverts commit ee1f6681. The aformentioned commit added a check to allow 'iw wlan0 set power_save off' to work for mesh interfaces. However, this is problematic because it also allows 'iw wlan0 set power_save on', which will crash in short order because all of the subsequent code manipulates sdata->u.mgd. The power-saving states for mesh interfaces can be manipulated through the mesh config, e.g: 'iw wlan0 set mesh_param mesh_power_save=active' (which, despite the name, actualy disables power saving since the setting refers to the type of sleep the interface undergoes). Cc: stable@vger.kernel.org Fixes: ee1f6681 ("mac80211: allow disable power save in mesh") Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
- 21 Nov, 2013 14 commits
-
-
Johannes Berg authored
Fix another really stupid bug - I introduced genl_set_err() precisely to be able to adjust the group and reject invalid ones, but then forgot to do so. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Unfortunately, I introduced a tremendously stupid bug into genlmsg_multicast() when doing all those multicast group changes: it adjusts the group number, but then passes it to genlmsg_multicast_netns() which does that again. Somehow, my tests failed to catch this, so add a warning into genlmsg_multicast_netns() and remove the offending group ID adjustment. Also add a warning to the similar code in other functions so people who misuse them are more loudly warned. Signed-off-by:
-
Daniel Borkmann authored
Salam reported a use after free bug in PF_PACKET that occurs when we're sending out frames on a socket bound device and suddenly the net device is being unregistered. It appears that commit 827d9780 introduced a possible race condition between {t,}packet_snd() and packet_notifier(). In the case of a bound socket, packet_notifier() can drop the last reference to the net_device and {t,}packet_snd() might end up suddenly sending a packet over a freed net_device. To avoid reverting 827d9780 and thus introducing a performance regression compared to the current state of things, we decided to hold a cached RCU protected pointer to the net device and maintain it on write side via bind spin_lock protected register_prot_hook() and __unregister_prot_hook() calls. In {t,}packet_snd() path, we access this pointer under rcu_read_lock through packet_cached_dev_get() that holds reference to the device to prevent it from being freed through packet_notifier() while we're in send path. This is okay to do as dev_put()/dev_hold() are per-cpu counters, so this should not be a performance issue. Also, the code simplifies a bit as we don't need need_rls_dev anymore. Fixes: 827d9780 ("af-packet: Use existing netdev reference for bound sockets.") Reported-by:
Salam Noureddine <noureddine@aristanetworks.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
David Vrabel authored
If the VIF thread is still running after unbinding the Tx and Rx IRQs in xenvif_disconnect(), the thread may attempt to raise an event which will BUG (as the irq is unbound). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Michael Opdenacker authored
This removes a code line that is between a "return 0;" and an error label. This code line can never be reached. Found by Coverity (CID: 1130529) Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== pull request: wireless 2013-11-21 Please pull this batch of fixes intended for the 3.13 stream! For the Bluetooth bits, Gustavo says: "A few fixes for 3.13. There is 3 fixes to the RFCOMM protocol. One crash fix to L2CAP. A simple fix to a bad behaviour in the SMP protocol." On top of that... Amitkumar Karwar sends a quintet of mwifiex fixes -- two fixes related to failure handling, two memory leak fixes, and a NULL pointer fix. Felix Fietkau corrects and earlier rt2x00 HT descriptor handling fix to address a crash. Geyslan G. Bem fixes a memory leak in brcmfmac. Larry Finger address more pointer arithmetic errors in rtlwifi. Luis R. Rodriguez provides a regulatory fix in the shared ath code. Sujith Manoharan brings a couple ath9k initialization fixes. Ujjal Roy offers one more mwifiex fix to avoid invalid memory accesses when unloading the USB driver. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains fixes for your net tree, they are: * Remove extra quote from connlimit configuration in Kconfig, from Randy Dunlap. * Fix missing mss option in syn packets sent to the backend in our new synproxy target, from Martin Topholm. * Use window scale announced by client when sending the forged syn to the backend, from Martin Topholm. * Fix IPv6 address comparison in ebtables, from Luís Fernando Cornachioni Estrozi. * Fix wrong endianess in sequence adjustment which breaks helpers in NAT configurations, from Phil Oester. * Fix the error path handling of nft_compat, from me. * Make sure the global conntrack counter is decremented after the object has been released, also from me. ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Madalin Bucur authored
Add auto-MDI/MDI-X capability for forced (autonegotiation disabled) 10/100 Mbps speeds on Vitesse VSC82x4 PHYs. Exported previously static function genphy_setup_forced() required by the new config_aneg handler in the Vitesse PHY module. Signed-off-by:
Madalin Bucur <madalin.bucur@freescale.com> Signed-off-by:
Shruti Kanetkar <Shruti@freescale.com> Signed-off-by:
-
Sandeep Singh authored
Vitesse VSC8662 is Dual Port 10/100/1000Base-T Phy Its register set and features are similar to other Vitesse Phys. Signed-off-by:
Sandeep Singh <Sandeep@freescale.com> Signed-off-by:
Andy Fleming <afleming@gmail.com> Signed-off-by:
-
shaohui xie authored
The VSC8574 is a quad-port Gigabit Ethernet transceiver with four SerDes interfaces for quad-port dual media capability. Signed-off-by:
Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by:
-
Andy Fleming authored
Vitesse VSC8234 is quad port 10/100/1000BASE-T PHY with SGMII and SERDES MAC interfaces. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Hannes Frederic Sowa authored
In that case it is probable that kernel code overwrote part of the stack. So we should bail out loudly here. The BUG_ON may be removed in future if we are sure all protocols are conformant. Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by:
-
- 20 Nov, 2013 9 commits
-
-
Ding Tianhong authored
bridge dev When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered --------------------------- cut here ------------------------------- The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge. v2: according to the Toshiaki Makita and Vlad's suggestion, I only delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge. Suggested-by:Toshiaki Makita <toshiaki.makita1@gmail.com> Suggested-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Vlad Yasevich authored
The following commit: b6c40d68 net: only invoke dev->change_rx_flags when device is UP tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down. A later commit: deede2fa vlan: Don't propagate flag changes on down interfaces fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN. The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following: eth0----> bond0 ----> bridge0 ---> vlan50 If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface. The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68 and leave it to the individual devices to decide whether they will block flag propagation or not. Reported-by:Stefan Priebe <s.priebe@profihost.ag> Suggested-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Alexei Starovoitov authored
CPUs can ask for local route via ip_route_input_noref() concurrently. if nh_rth_input is not cached yet, CPUs will proceed to allocate equivalent DSTs on 'lo' and then will try to cache them in nh_rth_input via rt_cache_route() Most of the time they succeed, but on occasion the following two lines: orig = *p; prev = cmpxchg(p, orig, rt); in rt_cache_route() do race and one of the cpus fails to complete cmpxchg. But ip_route_input_slow() doesn't check the return code of rt_cache_route(), so dst is leaking. dst_destroy() is never called and 'lo' device refcnt doesn't go to zero, which can be seen in the logs as: unregister_netdevice: waiting for lo to become free. Usage count = 1 Adding mdelay() between above two lines makes it easily reproducible. Fix it similar to nh_pcpu_rth_output case. Fixes: d2d68ba9 ("ipv4: Cache input routes in fib_info nexthops.") Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152 bug fixes For the patch #3, I add netif_tx_lock() before checking the netif_queue_stopped(). Besides, I add checking the skb queue length before waking the tx queue. ==================== Signed-off-by: -
hayeswang authored
The data from the hardware should be little endian. Correct the declaration. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
hayeswang authored
The maximum packet number which a tx aggregation buffer could contain is the tx_qlen. tx_qlen = buffer size / (packet size + descriptor size). If the tx buffer is empty and the queued packets are more than the maximum value which is defined above, stop the tx queue. Wake the tx queue if tx queue is stopped and the queued packets are less than tx_qlen. Signed-off-by:
-
hayeswang authored
Remove the code for sending the packet in the rtl8152_start_xmit(). Let rtl8152_start_xmit() to queue the packet only, and schedule a tasklet to send the queued packets. This simplify the code and make sure all the packet would be sent by the original order. Signed-off-by:
-
hayeswang authored
The tx/rx would access the memory which is out of the desired range. Modify the method of checking the end of the memory to avoid it. For r8152_tx_agg_fill(), the variable remain may become negative. However, the declaration is unsigned, so the while loop wouldn't break when reaching the end of the desied memory. Although to change the declaration from unsigned to signed is enough to fix it, I also modify the checking method for safe. Replace remain = rx_buf_sz - sizeof(*tx_desc) - (u32)((void *)tx_data - agg->head); with remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head); to make sure the variable remain is always positive. Then, the overflow wouldn't happen. For rx_bottom(), the rx_desc should not be used to calculate the packet length before making sure the rx_desc is in the desired range. Change the checking to two parts. First, check the descriptor is in the memory. The other, using the descriptor to find out the packet length and check if the packet is in the memory. Signed-off-by:
-
Mahesh Rajashekhara authored
It appears that driver runs into a problem here if fibsize is too small because we allocate user_srbcmd with fibsize size only but later we access it until user_srbcmd->sg.count to copy it over to srbcmd. It is not correct to test (fibsize < sizeof(*user_srbcmd)) because this structure already includes one sg element and this is not needed for commands without data. So, we would recommend to add the following (instead of test for fibsize == 0). Signed-off-by:
Mahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com> Reported-by:
Nico Golde <nico@ngolde.de> Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Nov, 2013 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Two merge window fallout build fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: merge fix sparc64: fix build regession
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 fix from Tony Luck: "Unbreak ia64 build by avoiding circular dependency" * tag 'please-pull-fixia64' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: kernel/bounds: avoid circular dependencies in generated headers
-
Kirill A. Shutemov authored
<linux/spinlock.h> has heavy dependencies on other header files. It triggers circular dependencies in generated headers on IA64, at least: CC kernel/bounds.s In file included from /home/space/kas/git/public/linux/arch/ia64/include/asm/thread_info.h:9:0, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/ia64/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/spinlock.h:50, from kernel/bounds.c:14: /home/space/kas/git/public/linux/arch/ia64/include/asm/asm-offsets.h:1:35: fatal error: generated/asm-offsets.h: No such file or directory compilation terminated. Let's replace <linux/spinlock.h> with <linux/spinlock_types.h>, it's enough to find out size of spinlock_t. Signed-off-by:Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-and-Tested-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
David S. Miller authored
Johannes Berg says: ==================== genetlink: clean up multicast group APIs The generic netlink multicast group registration doesn't have to be dynamic, and can thus be simplified just like I did with the ops. This removes some complexity in registration code. Additionally, two users of generic netlink already use multicast groups in a wrong way, add workarounds for those two to keep the userspace API working, but at the same time make them not clash with other users of multicast groups as might happen now. While making it all a bit easier, also prevent such abuse by adding checks to the APIs so each family can only use the groups it owns. ==================== Signed-off-by: -
Johannes Berg authored
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by:
-
Johannes Berg authored
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by:
-
Johannes Berg authored
Add a static inline to generic netlink to wrap netlink_set_err() to make it easier to use here - use it in openvswitch (the only generic netlink user of netlink_set_err()). Signed-off-by:
-
Johannes Berg authored
There's no reason to have the family pointer there since it can just be passed internally where needed, so remove it. Signed-off-by:
-
Johannes Berg authored
There are no users of this API remaining, and we'll soon change group registration to be static (like ops are now) Signed-off-by:
-
Johannes Berg authored
There's no need to unregister the multicast group if the generic netlink family is registered immediately after. Signed-off-by:
-
Johannes Berg authored
The quota code is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make the quota code use the correct API, but since this is already used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
