- 29 Mar, 2010 9 commits
-
-
Sreenivasa Honnur authored
- Fix a receive stall due to driver being out of synch with chip. In a corner case scenario the adapter's ring controller may return a RxD with transfer code of 0xC, while the host ownership bit is still set to the adapter. The driver needs to assume that this case where (host_ownership == 1 or adapter) and (transfer_code == 0xC) is valid, that is, this RxD has been returned by the receive ring controller but no frame data is associated with the rxd. - Restore the transfer code field of each newly replenished RxD to 0x0. - Code cleanup. Removed usage of magic numbers. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> For NX2031, msix is supported from fw version > 3.4.336. This fw version check should take flash fw in consider instead of running fw or fw from file. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Rarely: Fw file size can be unaligned to 8. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rajesh K Borundia authored
Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Validate all sections of unified romimage, before accessing them, to avoid seg fault. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amit Kumar Salecha authored
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> o DEV_NEED_RESET state was not handled during fw intialization phase. o nx_decr_dev_ref_cnt() can return error, if fail to grab pcie seamphore. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sucheta Chakraborty authored
Kernel default tx csum function (ethtool_op_get_tx_csum) doesn't show correct csum status. It takes various FLAGS (NETIF_F_ALL_CSUM) in account to show tx csum status, which driver doesn't set while disabling tx csum. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Mar, 2010 2 commits
-
-
David S. Miller authored
Unlike the ipv4 side, these are completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jan Engelhardt authored
When more data is stuffed into an nlmsg than initially projected, an extra allocation needs to be done. Reserve enough for IFLA_STATS64 so that this does not to needlessy happen. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Mar, 2010 5 commits
-
-
Jan Engelhardt authored
Tony Luck observes that the original IFLA_STATS64 submission causes unaligned accesses. This is because nla_data() returns a pointer to a memory region that is only aligned to 32 bits. Do some memcpying to workaround this. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bruce Allan authored
As an alternative to a quite large patch previously submitted by Joe Perches to make use of kernel logging API, this patch is much less intrusive. Convert e_<level> to netdev_<level> Use #define pr_fmt Convert a few printks to pr_<level> Cc: Joe Perches <joe@perches.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Goff authored
This was included in OpenVZ kernels but wasn't integrated upstream. >From git://git.openvz.org/pub/linux-2.6.24-openvz: commit 5c69402f18adf7276352e051ece2cf31feefab02 Author: Alexey Dobriyan <adobriyan@openvz.org> Date: Mon Dec 24 14:37:45 2007 +0300 netlink: fixup ->tgid to work in multiple PID namespaces Signed-off-by: Tom Goff <thomas.goff@boeing.com> Acked-by: Alexey Dobriyan <adobriyan@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Mar, 2010 2 commits
-
-
David S. Miller authored
Finishing naturally from hlist_for_each_entry(x, ...) does not result in 'x' being NULL. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Use list_add_tail() to get the behavior we had before the list_head conversion for ipv6 address lists. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Mar, 2010 1 commit
-
-
Eric Dumazet authored
RPS currently depends on SMP and SYSFS Adding a CONFIG_RPS makes sense in case this requirement changes in the future. This patch saves about 1500 bytes of kernel text in case SMP is on but SYSFS is off. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Mar, 2010 20 commits
-
-
John W. Linville authored
drivers/net/wireless/iwlwifi/iwl-rx.c: In function 'iwl_good_ack_health': drivers/net/wireless/iwlwifi/iwl-rx.c:647: error: 'struct iwl_priv' has no member named '_agn' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Frans Pop authored
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Includes one minor indentation fix to placate checkpatch. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Trailing spaces in files in /proc for lanstreamer.c and olympic.c have been left as they are. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Includes a few whitespace fixes to placate checkpatch. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
ps3_gelic_wireless.c: also remove a stray "p" after a newline. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Includes a minor consistency improvement between two related debug messages. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Per Liden <per.liden@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Frans Pop authored
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We never use "sk" so this patch removes it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We never actually use "dev" so I removed it. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We don't need "dev" any more after: a5a04819 [LLC]: station source mac address Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We don't need "sdata" any more after: d84f3234 mac80211: remove dev_hold/put calls Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
In nl80211.h, be a little more elaborate in the docs for the definitions NL80211_ATTR_CQM_RSSI_THOLD and NL80211_ATTR_CQM_RSSI_HYST. Reported-by: Luis R. Rodriguez <mcgrof@gmail.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
Add support for the set_cqm_config op. This op function configures the requested connection quality monitor rssi threshold and rssi hysteresis values to the hardware if the hardware supports IEEE80211_HW_SUPPORTS_CQM. For unsupported hardware, currently -EOPNOTSUPP is returned, so the mac80211 is currently not doing connection quality monitoring on the host. This could be added later, if needed. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
Add support for basic configuration of a connection quality monitoring to the nl80211 interface, and basic support for notifying about triggered monitoring events. Via this interface a user-space connection manager may configure and receive pre-warning events of deteriorating WLAN connection quality, and start preparing for roaming in advance, before the connection is already lost. An example usage of such a trigger is starting scanning for nearby AP's in an attempt to find one with better connection quality, and associate to it before the connection characteristics of the existing connection become too bad or the association is even lost, leading in a prolonged delay in connectivity. The interface currently supports only RSSI, but it could be later extended to include other parameters, such as signal-to-noise ratio, if need for that arises. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Amitkumar Karwar authored
Auto auth mode is enabled by default. If user doesn't specify the auth mode, while association driver will first try with open mode and then with shared key mode. If user specifies an auth mode, auto auth is disabled and driver will not try association with another auth mode. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith authored
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tom Herbert authored
Need to take spinlocks when dequeuing from input_pkt_queue in flush_backlog. Also, flush_backlog can now be called directly from netdev_run_todo. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Mar, 2010 1 commit
-
-
Daniel Ngu authored
WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Daniel Ngu <daniel.dy.ngu@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-