- 19 Aug, 2020 40 commits
-
-
Pierre-Louis Bossart authored
[ Upstream commit 88cee34b ] This field is required for ASoC cards. Not setting it will result in a module->name pointer being NULL and generate problems such as cat /proc/asound/modules 0 (efault) Fixes: 76016322 ('ASoC: Intel: Add Broxton-P machine driver') Reported-by:
Jaroslav Kysela <perex@perex.cz> Suggested-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chuhong Yuan authored
[ Upstream commit dc7690a7 ] preview_init_entities() does not call v4l2_ctrl_handler_free() when it fails. Add the missed function to fix it. Fixes: de1135d4 ("[media] omap3isp: CCDC, preview engine and resizer") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 985b1f59 ] clang points out that doing arithmetic between diffent enums is usually a mistake: drivers/leds/leds-lm355x.c:167:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion] reg_val = pdata->pin_tx2 | pdata->ntc_pin; ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ drivers/leds/leds-lm355x.c:178:28: warning: bitwise operation between different enumeration types ('enum lm355x_tx2' and 'enum lm355x_ntc') [-Wenum-enum-conversion] reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode; ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ In this driver, it is intentional, so add a cast to hide the false-positive warning. It appears to be the only instance of this warning at the moment. Fixes: b98d13c7 ("leds: Add new LED driver for lm355x chips") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 5f368dde ] Shifting the integer value 1 is evaluated using 32-bit arithmetic and then used in an expression that expects a long value leads to a potential integer overflow. Fix this by using the BIT macro to perform the shift to avoid the overflow. Addresses-Coverity: ("Unintentional integer overflow") Fixes: ad49f860 ("drm/arm: Add support for Mali Display Processors") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit f8794fea ] Since commit 65f037e8 ("drm/etnaviv: add support for slave interface clock") the reg clock is enabled before the bus clock and we need to undo its enablement on error. Fixes: 65f037e8 ("drm/etnaviv: add support for slave interface clock") Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Tomasz Duszynski authored
[ Upstream commit df16c33a ] IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting raw concentrations of pollutants. Raw value should be meaningless before being properly scaled. Because of that description shouldn't mention raw value unit whatsoever. Fix this by rephrasing existing description so it follows conventions used throughout IIO ABI docs. Fixes: 8ff6b3bc ("iio: chemical: Add IIO_CONCENTRATION channel type") Signed-off-by:
Tomasz Duszynski <tomasz.duszynski@octakon.com> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit a738e766 ] ath10k_htt_tx_free_msdu_id() has a lockdep assertion that htt->tx_lock is held. Acquire the lock in a couple of error paths when calling that function to ensure this condition is met. Fixes: 6421969f ("ath10k: refactor tx pending management") Fixes: e62ee5c3 ("ath10k: Add support for htt_data_tx_desc_64 descriptor") Signed-off-by:
Evan Green <evgreen@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200604105901.1.I5b8b0c7ee0d3e51a73248975a9da61401b8f3900@changeidSigned-off-by:
-
Christophe JAILLET authored
[ Upstream commit 499a2c41 ] 'dma_alloc_coherent()' must be balanced by a call to 'dma_free_coherent()' not 'dma_free_wc()'. The correct dma_free_ function is already used in the error handling path of the probe function. Fixes: 77e19675 ("[ARM] pxafb: allow video memory size to be configurable") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Jani Nikula <jani.nikula@intel.com> cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429084505.108897-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Dejin Zheng authored
[ Upstream commit fd4b8243 ] A call of the function do_take_over_console() can fail here. The corresponding system resources were not released then. Thus add a call of iounmap() and release_mem_region() together with the check of a failure predicate. and also add release_mem_region() on device removal. Fixes: e86bb8ac ("[PATCH] VT binding: Make newport_con support binding") Suggested-by:
Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Dejin Zheng authored
[ Upstream commit 98bd4f72 ] the sfb->fb->screen_base is not save the value get by iounmap() when the chip id is 0x720. so iounmap() for address sfb->fb->screen_base is not right. Fixes: 1461d667 ("staging: sm7xxfb: merge sm712fb with fbdev") Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Teddy Wang <teddy.wang@siliconmotion.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit b975abbd ] In intel_gtt_setup_scratch_page(), pointer "page" is not released if pci_dma_mapping_error() return an error, leading to a memory leak on module initialisation failure. Simply fix this issue by freeing "page" before return. Fixes: 0e87d2b0 ("intel-gtt: initialize our own scratch page") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Rob Clark authored
[ Upstream commit 5e16372b ] This can happen a lot when things go pear shaped. Lets not flood dmesg when this happens. Signed-off-by:
Rob Clark <robdclark@chromium.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
-
Erik Kaneda authored
[ Upstream commit 6a54ebae ] ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70 Object reference counts are used as a part of ACPICA's garbage collection mechanism. This mechanism keeps track of references to heap-allocated structures such as the ACPI operand objects. Recent server firmware has revealed that this reference count can overflow on large servers that declare many field units under the same operation_region. This occurs because each field unit declaration will add a reference count to the source operation_region. This change solves the reference count overflow for operation_regions objects by preventing fieldunits from incrementing their operation_region's reference count. Each operation_region's reference count will not be changed by named objects declared under the Field operator. During namespace deletion, the operation_region namespace node will be deleted and each fieldunit will be deleted without touching the deleted operation_region object. Link: https://github.com/acpica/acpica/commit/e17b28cfSigned-off-by:
Erik Kaneda <erik.kaneda@intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Coly Li authored
[ Upstream commit 117f636e ] In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value. But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check, 2156 if (ca->sb.seq > c->sb.seq) { 2157 c->sb.version = ca->sb.version; 2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16); 2159 c->sb.flags = ca->sb.flags; 2160 c->sb.seq = ca->sb.seq; 2161 pr_debug("set version = %llu\n", c->sb.version); 2162 } c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated. The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly. But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered. This patch modifies the if() check to the following way, 2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) { Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jim Cromie authored
[ Upstream commit f678ce8c ] ddebug_describe_flags() currently fills a caller provided string buffer, after testing its size (also passed) in a BUG_ON. Fix this by replacing them with a known-big-enough string buffer wrapped in a struct, and passing that instead. Also simplify ddebug_describe_flags() flags parameter from a struct to a member in that struct, and hoist the member deref up to the caller. This makes the function reusable (soon) where flags are unpacked. Acked-by: <jbaron@akamai.com> Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Danesh Petigara authored
[ Upstream commit 5fc453d7 ] GISB bus error kernel panics have been observed during S2 transition tests on the 7271t platform. The errors are a result of the BDC interrupt handler trying to access BDC register space after the system's suspend callbacks have completed. Adding a suspend hook to the BDC driver that halts the controller before S2 entry thus preventing unwanted access to the BDC register space during this transition. Signed-off-by:
Danesh Petigara <danesh.petigara@broadcom.com> Signed-off-by:
Al Cooper <alcooperx@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Sasi Kumar authored
[ Upstream commit a95bdfd2 ] Multiple connects/disconnects can cause a crash on the second disconnect. The driver had a problem where it would try to send endpoint commands after it was disconnected which is not allowed by the hardware. The fix is to only allow the endpoint commands when the endpoint is connected. This will also fix issues that showed up when using configfs to create gadgets. Signed-off-by:
Sasi Kumar <sasi.kumar@broadcom.com> Signed-off-by:
-
Evgeny Novikov authored
[ Upstream commit 2468c877 ] Driver does not release memory for device on error handling paths in net2280_probe() when gadget_release() is not registered yet. The patch fixes the bug like in other similar drivers. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Evgeny Novikov <novikov@ispras.ru> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit 35681862 ] Once channel's job is hung, it dumps the channel's state into KMSG before tearing down the offending job. If multiple channels hang at once, then they dump messages simultaneously, making the debug info unreadable, and thus, useless. This patch adds mutex which allows only one channel to emit debug messages at a time. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bolarinwa Olayemi Saheed authored
[ Upstream commit 9018fd7f ] On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x). This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success. Check the return value of pcie_capability_read_dword() to ensure success. Suggested-by:
Bjorn Helgaas <bjorn@helgaas.com> Signed-off-by:
Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by:
-
Wright Feng authored
[ Upstream commit fcdd7a87 ] When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the skbs in PSQ and TXQ (The skb's pointer in hanger slot linked to PSQ and TSQ), so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already sets BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb, therefore we add the same thing in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Wright Feng <wright.feng@cypress.com> Signed-off-by:
Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Prasanna Kerekoppa authored
[ Upstream commit fa326654 ] Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by:
Prasanna Kerekoppa <prasanna.kerekoppa@cypress.com> Signed-off-by:
-
Wright Feng authored
[ Upstream commit eccbf46b ] brcmfmac host driver makes SDIO bus sleep and stops SDIO watchdog if no pending event or data. As a result, host driver does not poll firmware console buffer before buffer overflow, which leads to missing firmware logs. We should not stop SDIO watchdog if console_interval is non-zero in debug build. Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit 0a3b3c25 ] A large process running on a heavily loaded system can encounter the following RCU CPU stall warning: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 3-....: (20998 ticks this GP) idle=4ea/1/0x4000000000000002 softirq=556558/556558 fqs=5190 (t=21013 jiffies g=1005461 q=132576) NMI backtrace for cpu 3 CPU: 3 PID: 501900 Comm: aio-free-ring-w Kdump: loaded Not tainted 5.2.9-108_fbk12_rc3_3858_gb83b75af7909 #1 Hardware name: Wiwynn HoneyBadger/PantherPlus, BIOS HBM6.71 02/03/2016 Call Trace: <IRQ> dump_stack+0x46/0x60 nmi_cpu_backtrace.cold.3+0x13/0x50 ? lapic_can_unplug_cpu.cold.27+0x34/0x34 nmi_trigger_cpumask_backtrace+0xba/0xca rcu_dump_cpu_stacks+0x99/0xc7 rcu_sched_clock_irq.cold.87+0x1aa/0x397 ? tick_sched_do_timer+0x60/0x60 update_process_times+0x28/0x60 tick_sched_timer+0x37/0x70 __hrtimer_run_queues+0xfe/0x270 hrtimer_interrupt+0xf4/0x210 smp_apic_timer_interrupt+0x5e/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:kmem_cache_free+0x223/0x300 Code: 88 00 00 00 0f 85 ca 00 00 00 41 8b 55 18 31 f6 f7 da 41 f6 45 0a 02 40 0f 94 c6 83 c6 05 9c 41 5e fa e8 a0 a7 01 00 41 56 9d <49> 8b 47 08 a8 03 0f 85 87 00 00 00 65 48 ff 08 e9 3d fe ff ff 65 RSP: 0018:ffffc9000e8e3da8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000020000 RBX: ffff88861b9de960 RCX: 0000000000000030 RDX: fffffffffffe41e8 RSI: 000060777fe3a100 RDI: 000000000001be18 RBP: ffffea00186e7780 R08: ffffffffffffffff R09: ffffffffffffffff R10: ffff88861b9dea28 R11: ffff88887ffde000 R12: ffffffff81230a1f R13: ffff888854684dc0 R14: 0000000000000206 R15: ffff8888547dbc00 ? remove_vma+0x4f/0x60 remove_vma+0x4f/0x60 exit_mmap+0xd6/0x160 mmput+0x4a/0x110 do_exit+0x278/0xae0 ? syscall_trace_enter+0x1d3/0x2b0 ? handle_mm_fault+0xaa/0x1c0 do_group_exit+0x3a/0xa0 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x42/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 And on a PREEMPT=n kernel, the "while (vma)" loop in exit_mmap() can run for a very long time given a large process. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> Reviewed-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Bartosz Golaszewski authored
[ Upstream commit 6eeb997a ] This driver may take a regular spinlock when a raw spinlock (irq_desc->lock) is already taken which results in the following lockdep splat: ============================= [ BUG: Invalid wait context ] 5.7.0-rc7 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0 other info that might help us debug this: context-{5:5} 2 locks held by swapper/0/0: #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1 Hardware name: Pumpkin MT8516 (DT) Call trace: dump_backtrace+0x0/0x180 show_stack+0x14/0x20 dump_stack+0xd0/0x118 __lock_acquire+0x8c8/0x2270 lock_acquire+0xf8/0x470 _raw_spin_lock_irqsave+0x50/0x78 mtk_sysirq_set_type+0x48/0xc0 __irq_set_trigger+0x58/0x170 __setup_irq+0x420/0x8a0 request_threaded_irq+0xd8/0x190 timer_of_init+0x1e8/0x2c4 mtk_gpt_init+0x5c/0x1dc timer_probe+0x74/0xf4 time_init+0x14/0x44 start_kernel+0x394/0x4f0 Replace the spinlock_t with raw_spinlock_t to avoid this warning. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.plSigned-off-by:
-
Christian König authored
[ Upstream commit ba806f98 ] Always use the PCI GART instead. We just have to many cases where AGP still causes problems. This means a performance regression for some GPUs, but also a bug fix for some others. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Michael Tretter authored
[ Upstream commit c704b170 ] Using plain echo to set the "force" connector attribute fails with -EINVAL, because echo appends a newline to the output. Replace strcmp with sysfs_streq to also accept strings that end with a newline. v2: use sysfs_streq instead of stripping trailing whitespace Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817104307.17124-1-m.tretter@pengutronix.deSigned-off-by:
-
Chunfeng Yun authored
[ Upstream commit f1e51e99 ] If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend. Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 659fb5f1 ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the ref count before returning the error. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit c5d5a32e ] in etnaviv_gpu_submit, etnaviv_gpu_recover_hang, etnaviv_gpu_debugfs, and etnaviv_gpu_init the call to pm_runtime_get_sync increments the counter even in case of failure, leading to incorrect ref count. In case of failure, decrement the ref count before returning. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Ricardo Cañuelo authored
[ Upstream commit bbe28fc3 ] hi3660-hikey960.dts: Define a 'ports' node for 'adv7533: adv7533@39' and the 'adi,dsi-lanes' property to make it compliant with the adi,adv7533 DT binding. This fills the requirements to meet the binding requirements, remote endpoints are not defined. hi6220-hikey.dts: Change property name s/pd-gpio/pd-gpios, gpio properties should be plural. This is just a cosmetic change. Signed-off-by:
Ricardo Cañuelo <ricardo.canuelo@collabora.com> Acked-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Zhao Heming authored
[ Upstream commit 60f80d6f ] reproduction steps: ``` node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb node1 # mdadm -G /dev/md0 -b none mdadm: failed to remove clustered bitmap. node1 # mdadm -S --scan ^C <==== mdadm hung & kernel crash ``` kernel stack: ``` [ 335.230657] general protection fault: 0000 [#1] SMP NOPTI [...] [ 335.230848] Call Trace: [ 335.230873] ? unlock_all_bitmaps+0x5/0x70 [md_cluster] [ 335.230886] unlock_all_bitmaps+0x3d/0x70 [md_cluster] [ 335.230899] leave+0x10f/0x190 [md_cluster] [ 335.230932] ? md_super_wait+0x93/0xa0 [md_mod] [ 335.230947] ? leave+0x5/0x190 [md_cluster] [ 335.230973] md_cluster_stop+0x1a/0x30 [md_mod] [ 335.230999] md_bitmap_free+0x142/0x150 [md_mod] [ 335.231013] ? _cond_resched+0x15/0x40 [ 335.231025] ? mutex_lock+0xe/0x30 [ 335.231056] __md_stop+0x1c/0xa0 [md_mod] [ 335.231083] do_md_stop+0x160/0x580 [md_mod] [ 335.231119] ? 0xffffffffc05fb078 [ 335.231148] md_ioctl+0xa04/0x1930 [md_mod] [ 335.231165] ? filename_lookup+0xf2/0x190 [ 335.231179] blkdev_ioctl+0x93c/0xa10 [ 335.231205] ? _cond_resched+0x15/0x40 [ 335.231214] ? __check_object_size+0xd4/0x1a0 [ 335.231224] block_ioctl+0x39/0x40 [ 335.231243] do_vfs_ioctl+0xa0/0x680 [ 335.231253] ksys_ioctl+0x70/0x80 [ 335.231261] __x64_sys_ioctl+0x16/0x20 [ 335.231271] do_syscall_64+0x65/0x1f0 [ 335.231278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ``` Signed-off-by:
Zhao Heming <heming.zhao@suse.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Evgeny Novikov authored
[ Upstream commit edcb3895 ] neofb_probe() calls neo_scan_monitor() that can successfully allocate a memory for info->monspecs.modedb and proceed to case 0x03. There it does not free the memory and returns -1. neofb_probe() goes to label err_scan_monitor, thus, it does not free this memory through calling fb_destroy_modedb() as well. We can not go to label err_init_hw since neo_scan_monitor() can fail during memory allocation. So, the patch frees the memory directly for case 0x03. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Sedat Dilek authored
[ Upstream commit 3347c8a0 ] When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS) from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils I see the following breakage in Debian/testing AMD64: <instantiation>:15:74: error: too many positional arguments PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, ^ arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp) ^ <instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^ arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation GCM_ENC_DEC dec ^ <instantiation>:15:74: error: too many positional arguments PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, ^ arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp) ^ <instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^ arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation GCM_ENC_DEC enc Craig Topper suggested me in ClangBuiltLinux issue #1050: > I think the "too many positional arguments" is because the parser isn't able > to handle the trailing commas. > > The "unknown use of instruction mnemonic" is because the macro was named > GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with > GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the > macro instantiation, but llvm doesn't. First, I removed the trailing comma in the PRECOMPUTE line. Second, I substituted: 1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec 2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc With these changes I was able to build with LLVM_IAS=1 and boot on bare metal. I confirmed that this works with Linux-kernel v5.7.5 final. NOTE: This patch is on top of Linux v5.7 final. Thanks to Craig and especially Nick for double-checking and his comments. Suggested-by:
Craig Topper <craig.topper@intel.com> Suggested-by:
Craig Topper <craig.topper@gmail.com> Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 9fb10671 ] On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Acked-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Jack Xiao authored
[ Upstream commit 55611b50 ] Check if irq_src is NULL to avoid dereferencing a NULL pointer, for MES ring is uneccessary to recieve an interrupt notification. Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Acked-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
Paul E. McKenney authored
[ Upstream commit 9f47eb54 ] Very large I/Os can cause the following RCU CPU stall warning: RIP: 0010:rb_prev+0x8/0x50 Code: 49 89 c0 49 89 d1 48 89 c2 48 89 f8 e9 e5 fd ff ff 4c 89 48 10 c3 4c = 89 06 c3 4c 89 40 10 c3 0f 1f 00 48 8b 0f 48 39 cf 74 38 <48> 8b 47 10 48 85 c0 74 22 48 8b 50 08 48 85 d2 74 0c 48 89 d0 48 RSP: 0018:ffffc9002212bab0 EFLAGS: 00000287 ORIG_RAX: ffffffffffffff13 RAX: ffff888821f93630 RBX: ffff888821f93630 RCX: ffff888821f937e0 RDX: 0000000000000000 RSI: 0000000000102000 RDI: ffff888821f93630 RBP: 0000000000103000 R08: 000000000006c000 R09: 0000000000000238 R10: 0000000000102fff R11: ffffc9002212bac8 R12: 0000000000000001 R13: ffffffffffffffff R14: 0000000000102000 R15: ffff888821f937e0 __lookup_extent_mapping+0xa0/0x110 try_release_extent_mapping+0xdc/0x220 btrfs_releasepage+0x45/0x70 shrink_page_list+0xa39/0xb30 shrink_inactive_list+0x18f/0x3b0 shrink_lruvec+0x38e/0x6b0 shrink_node+0x14d/0x690 do_try_to_free_pages+0xc6/0x3e0 try_to_free_mem_cgroup_pages+0xe6/0x1e0 reclaim_high.constprop.73+0x87/0xc0 mem_cgroup_handle_over_high+0x66/0x150 exit_to_usermode_loop+0x82/0xd0 do_syscall_64+0xd4/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 On a PREEMPT=n kernel, the try_release_extent_mapping() function's "while" loop might run for a very long time on a large I/O. This commit therefore adds a cond_resched() to this loop, providing RCU any needed quiescent states. Signed-off-by:
-
Luis Chamberlain authored
[ Upstream commit 200f9337 ] Be pedantic on removal as well and hold the mutex. This should prevent uses of addition while we exit. Signed-off-by:
Luis Chamberlain <mcgrof@kernel.org> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Lihong Kou authored
[ Upstream commit f9c70bdc ] In the case we set or free the global value listen_chan in different threads, we can encounter the UAF problems because the method is not protected by any lock, add one to avoid this bug. BUG: KASAN: use-after-free in l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730 Read of size 8 at addr ffff888096950000 by task kworker/1:102/2868 CPU: 1 PID: 2868 Comm: kworker/1:102 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events do_enable_set Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1fb/0x318 lib/dump_stack.c:118 print_address_description+0x74/0x5c0 mm/kasan/report.c:374 __kasan_report+0x149/0x1c0 mm/kasan/report.c:506 kasan_report+0x26/0x50 mm/kasan/common.c:641 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 l2cap_chan_close+0x48/0x990 net/bluetooth/l2cap_core.c:730 do_enable_set+0x660/0x900 net/bluetooth/6lowpan.c:1074 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 2870: save_stack mm/kasan/common.c:72 [inline] set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc+0x118/0x1c0 mm/kasan/common.c:515 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:529 kmem_cache_alloc_trace+0x221/0x2f0 mm/slab.c:3551 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] l2cap_chan_create+0x50/0x320 net/bluetooth/l2cap_core.c:446 chan_create net/bluetooth/6lowpan.c:640 [inline] bt_6lowpan_listen net/bluetooth/6lowpan.c:959 [inline] do_enable_set+0x6a4/0x900 net/bluetooth/6lowpan.c:1078 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 2870: save_stack mm/kasan/common.c:72 [inline] set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:337 [inline] __kasan_slab_free+0x12e/0x1e0 mm/kasan/common.c:476 kasan_slab_free+0xe/0x10 mm/kasan/common.c:485 __cache_free mm/slab.c:3426 [inline] kfree+0x10d/0x220 mm/slab.c:3757 l2cap_chan_destroy net/bluetooth/l2cap_core.c:484 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_chan_put+0x170/0x190 net/bluetooth/l2cap_core.c:498 do_enable_set+0x66c/0x900 net/bluetooth/6lowpan.c:1075 process_one_work+0x7f5/0x10f0 kernel/workqueue.c:2264 worker_thread+0xbbc/0x1630 kernel/workqueue.c:2410 kthread+0x332/0x350 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff888096950000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 0 bytes inside of 2048-byte region [ffff888096950000, ffff888096950800) The buggy address belongs to the page: page:ffffea00025a5400 refcount:1 mapcount:0 mapping:ffff8880aa400e00 index:0x0 flags: 0xfffe0000000200(slab) raw: 00fffe0000000200 ffffea00027d1548 ffffea0002397808 ffff8880aa400e00 raw: 0000000000000000 ffff888096950000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88809694ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88809694ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096950000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888096950080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888096950100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Reported-by: syzbot+96414aa0033c363d8458@syzkaller.appspotmail.com Signed-off-by:
Lihong Kou <koulihong@huawei.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Maulik Shah authored
[ Upstream commit 1a53ce9a ] rpmh-rsc driver is fairly core to system and should not be removable once its probed. However it allows to unbind driver from sysfs using below command which results into a crash on sc7180. echo 18200000.rsc > /sys/bus/platform/drivers/rpmh/unbind Lets prevent unbind at runtime by setting suppress_bind_attrs flag. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592808805-2437-1-git-send-email-mkshah@codeaurora.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
