Make TI_EMIF depends on ARCH_OMAP2PLUS to avoid build breaks on other
architectures. In future if other TI non OMAP socs start using it, the
dependency can be extended.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the section mismatch be renaming the struct platform_driver
variable.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since no one using "dup_name", removed it completely in sysfs_rename.
Signed-off-by: Sasikantha babu <sasikanth.v19@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This was done to resolve a merge issue with the init/main.c file.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add debug entries for:
	1. calculated registers per frequency
	2. last polled value of MR4(temperature level
	   of LPDDR2 memory)
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add settings that are not dependent on frequency
or any other transient parameters. This includes
- power managment control init
- impedence calibration control
- frequency independent phy configuration registers
- initialization of temperature polling
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add an ISR for EMIF that:
	1. reports details of access errors
	2. takes action on thermal events

Also clear all interrupts on shut-down. Pending IRQs
may casue problems during warm-reset.

Temperature handling:
EMIF can be configured to poll the temperature level
of an LPDDR2 device from the MR4 mode register in the
device. EMIF generates an interrupt whenever it identifies
a temperature level change between two consecutive pollings.

Some of the timing parameters need to be de-rated at high
temperatures. The interrupt handler takes care of doing
this and also takes care of going back to nominal settings
when temperature falls back to nominal levels.
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change SDRAM timings and other settings as necessary
on voltage and frequency changes. We calculate these
register settings based on data from the device data
sheet and inputs such a frequency, voltage state(stable
or ramping), temperature level etc.

TODO: frequency and voltage change handling needs to
be integrated with clock framework and regulator
framework respectively. This is not done today
due to missing pieces in the kernel.
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EMIF is an SDRAM controller used in various Texas Instruments
SoCs. EMIF supports, based on its revision, one or more of
LPDDR2/DDR2/DDR3 protocols.

Add the basic infrastructure for EMIF driver that includes
driver registration, probe, parsing of platform data etc.
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add register offsets and bit field definitions
for EMIF module in TI SoCs
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

add LPDDR2 data from the JEDEC spec JESD209-2. The data
includes:

1. Addressing information for LPDDR2 memories of different
   densities and types(S2/S4)
2. AC timing data.

This data will useful for memory controller device drivers.
Right now this is used by the TI EMIF SDRAM controller
driver.
Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/infiniband/ulp/srp/ib_srp.c #defines pr_fmt() PFX fmt, but PFX
is not #defined until after <linux/*> headers are included.

This results in a bad expansion of the pr_warn() in the stub function.

2084c2084
<   printk("<4>" PFX "dyndbg supported only in " "CONFIG_DYNAMIC_DEBUG builds\n")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1- Call dynamic_debug_init() from early_initcall, not arch_initcall.
2- Call dynamic_debug_init_debugfs() from fs_initcall, not module_init.

RFC: This works for me on a 64 bit desktop and a i586 SBC, but is
untested on other arches.  I presume there is or was a reason
original code used arch_initcall, maybe the constraints have changed.

This makes facility available as soon as possible.

2nd change has a downside when dynamic_debug.verbose=1; all the
vpr_info()s called in the proc-fs code are activated, causing
voluminous output from dmesg.  TBD: Im unsure of this explanation, but
the output is there.  This could be fixed by changing those callsites
to v2pr_info(if verbose > 1).

1st change is still not early enough to enable pr_debugs in
kernel/params, so parsing of boot-args isnt logged.  The reparse of
those args is however visible after params.dyndbg="+p" is processed.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In dynamic-debug-howto.txt:

- add section: Debug Messages at Module Initialization Time
- update flags indicators in example outputs to include '='
- make flags descriptions tabular
- add item on '_' flag-char
- add dyndbg, boot-args examples
- rewrap some paragraphs with long lines

In Kconfig.debug, note that compiling with -DDEBUG enables all
pr_debug()s in that code.

In kernel-parameters.txt, add dyndbg and module.dyndbg items,
and deprecate ddebug_query.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pass module name into ddebug_exec_queries(), ddebug_exec_query(), and
ddebug_parse_query() as separate parameter.  In ddebug_parse_query(),
the module name is added into the query struct before the query-string
is parsed.  This allows the query-string to be shorter:

instead of:
   $modname.dyndbg="module $modname +fp"
do this:
   $modname.dyndbg="+fp"

Omitting "module $modname" from the query string is actually required
for $modname.dyndbg rules; the set-only-once check added in a previous
patch will throw an error if its added again.  ddebug_query="..." has
no $modname associated with it, so the query string may include it.

This also fixes redundant "module $modname" otherwise needed to handle
multiple queries per string:

   $modname.dyndbg="func foo +fp; func bar +fp"
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Print ram usage of dynamic-debug tables and verbose section so user
knows cost of enabling CONFIG_DYNAMIC_DEBUG.  This only counts the
size of the _ddebug tables for builtins and the __verbose section that
they refer to, not those used in loadable modules.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We dont want errors while parsing ddebug_query to unload ddebug
tables, so set success after tables are loaded, and return 0 after
query parsing is done.

Simplify error handling code since its no longer used for success,
and change goto label to out_err to clarify this.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor ddebug_dyndbg_boot_param_cb and ddebug_dyndbg_module_param_cb
into a common helper function, and call it from both.  The handling of
foo.dyndbg is unneeded by the latter, but harmless.

The 2 callers differ only by pr_info and the return code they pass to
the helper for when an unknown param is handled.  I could slightly
reduce dmesg clutter by putting the vpr_info in the common helper,
after the return on_err, but that loses __func__ context, is overly
silent on module_cb unknown param errors, and the clutter is only when
dynamic_debug.verbose=1 anyway.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With ddebug_dyndbg_boot_params_cb() handling bare dyndbg params, we
dont need ddebug_query param anymore.  Add a warning when processing
ddebug_query= param that it is deprecated, and to change it to dyndbg=

Add a deprecation notice for v3.8 to feature-removal-schedule.txt, and
add a suggested deprecation period of 3 releases to the header.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This introduces a fake module param $module.dyndbg.  Its based upon
Thomas Renninger's $module.ddebug boot-time debugging patch from
https://lkml.org/lkml/2010/9/15/397

The 'fake' module parameter is provided for all modules, whether or
not they need it.  It is not explicitly added to each module, but is
implemented in callbacks invoked from parse_args.

For builtin modules, dynamic_debug_init() now directly calls
parse_args(..., &ddebug_dyndbg_boot_params_cb), to process the params
undeclared in the modules, just after the ddebug tables are processed.

While its slightly weird to reprocess the boot params, parse_args() is
already called repeatedly by do_initcall_levels().  More importantly,
the dyndbg queries (given in ddebug_query or dyndbg params) cannot be
activated until after the ddebug tables are ready, and reusing
parse_args is cleaner than doing an ad-hoc parse.  This reparse would
break options like inc_verbosity, but they probably should be params,
like verbosity=3.

ddebug_dyndbg_boot_params_cb() handles both bare dyndbg (aka:
ddebug_query) and module-prefixed dyndbg params, and ignores all other
parameters.  For example, the following will enable pr_debug()s in 4
builtin modules, in the order given:

  dyndbg="module params +p; module aio +p" module.dyndbg=+p pci.dyndbg

For loadable modules, parse_args() in load_module() calls
ddebug_dyndbg_module_params_cb().  This handles bare dyndbg params as
passed from modprobe, and errors on other unknown params.

Note that modprobe reads /proc/cmdline, so "modprobe foo" grabs all
foo.params, strips the "foo.", and passes these to the kernel.
ddebug_dyndbg_module_params_cb() is again called for the unknown
params; it handles dyndbg, and errors on others.  The "doing" arg
added previously contains the module name.

For non CONFIG_DYNAMIC_DEBUG builds, the stub function accepts
and ignores $module.dyndbg params, other unknowns get -ENOENT.

If no param value is given (as in pci.dyndbg example above), "+p" is
assumed, which enables all pr_debug callsites in the module.

The dyndbg fake parameter is not shown in /sys/module/*/parameters,
thus it does not use any resources.  Changes to it are made via the
control file.

Also change pr_info in ddebug_exec_queries to vpr_info,
no need to see it all the time.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
CC: Thomas Renninger <trenn@suse.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a 3rd arg, named "doing", to unknown-options callbacks invoked
from parse_args(). The arg is passed as:

  "Booting kernel" from start_kernel(),
  initcall_level_names[i] from do_initcall_level(),
  mod->name from load_module(), via parse_args(), parse_one()

parse_args() already has the "name" parameter, which is renamed to
"doing" to better reflect current uses 1,2 above.  parse_args() passes
it to an altered parse_one(), which now passes it down into the
unknown option handler callbacks.

The mod->name will be needed to handle dyndbg for loadable modules,
since params passed by modprobe are not qualified (they do not have a
"$modname." prefix), and by the time the unknown-param callback is
called, the module name is not otherwise available.

Minor tweaks:

Add param-name to parse_one's pr_debug(), current message doesnt
identify the param being handled, add it.

Add a pr_info to print current level and level_name of the initcall,
and number of registered initcalls at that level.  This adds 7 lines
to dmesg output, like:

   initlevel:6=device, 172 registered initcalls

Drop "parameters" from initcall_level_names[], its unhelpful in the
pr_info() added above.  This array is passed into parse_args() by
do_initcall_level().

CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clean up some space-before-tabs problems.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use vpr_info to declutter code, reduce indenting, and change one
additional pr_info call in ddebug_exec_queries.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit f19420c1.

It contained lots of errors and warnings and shouldn't have ever been
applied, that was my fault, sorry.

Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch inform the state of only one cable instead of previous data
including the state of 32 cables to notifee which use
extcon_register_interest()
function to monitor whether the specific cable is attachd or detached.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull power management fixes from Rafael J. Wysocki:
 "Fix for an issue causing hibernation to hang on systems with highmem
  (that practically means i386) due to broken memory management (bug
  introduced in 3.2, so -stable material) and PM documentation update
  making the freezer documentation follow the code again after some
  recent updates."

* tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Freezer / Docs: Update documentation about freezing of tasks
  PM / Hibernate: fix the number of pages used for hibernate/thaw buffering

The autofs packet size has had a very unfortunate size problem on x86:
because the alignment of 'u64' differs in 32-bit and 64-bit modes, and
because the packet data was not 8-byte aligned, the size of the autofsv5
packet structure differed between 32-bit and 64-bit modes despite
looking otherwise identical (300 vs 304 bytes respectively).

We first fixed that up by making the 64-bit compat mode know about this
problem in commit a32744d4 ("autofs: work around unhappy compat
problem on x86-64"), and that made a 32-bit 'systemd' work happily on a
64-bit kernel because everything then worked the same way as on a 32-bit
kernel.

But it turned out that 'automount' had actually known and worked around
this problem in user space, so fixing the kernel to do the proper 32-bit
compatibility handling actually *broke* 32-bit automount on a 64-bit
kernel, because it knew that the packet sizes were wrong and expected
those incorrect sizes.

As a result, we ended up reverting that compatibility mode fix, and
thus breaking systemd again, in commit fcbf94b9.

With both automount and systemd doing a single read() system call, and
verifying that they get *exactly* the size they expect but using
different sizes, it seemed that fixing one of them inevitably seemed to
break the other.  At one point, a patch I seriously considered applying
from Michael Tokarev did a "strcmp()" to see if it was automount that
was doing the operation.  Ugly, ugly.

However, a prettier solution exists now thanks to the packetized pipe
mode.  By marking the communication pipe as being packetized (by simply
setting the O_DIRECT flag), we can always just write the bigger packet
size, and if user-space does a smaller read, it will just get that
partial end result and the extra alignment padding will simply be thrown
away.

This makes both automount and systemd happy, since they now get the size
they asked for, and the kernel side of autofs simply no longer needs to
care - it could pad out the packet arbitrarily.

Of course, if there is some *other* user of autofs (please, please,
please tell me it ain't so - and we haven't heard of any) that tries to
read the packets with multiple writes, that other user will now be
broken - the whole point of the packetized mode is that one system call
gets exactly one packet, and you cannot read a packet in pieces.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The file Documentation/power/freezing-of-tasks.txt was still referencing
the TIF_FREEZE flag, that was removed by the commit
d88e4cb6(freezer: remove now unused
TIF_FREEZE).

This patch removes all the references of TIF_FREEZE that were left
behind.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The actual internal pipe implementation is already really about
individual packets (called "pipe buffers"), and this simply exposes that
as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by
Alan Cox), a write() on a pipe will not merge the new data with previous
writes, so each write will get a pipe buffer of its own.  The pipe
buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn
will tell the reader side to break the read at that boundary (and throw
away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that
the pipe doesn't have to split them up), you can now treat the pipe as a
packet interface, where each read() system call will read one packet at
a time.  You can just use a sufficiently big read buffer (PIPE_BUF is
sufficient, since bigger than that doesn't guarantee atomicity anyway),
and the return value of the read() will naturally give you the size of
the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and
writes to a pipe continue to be no-ops.  Also note that big packets will
currently be split at write time, but that the size at which that
happens is not really specified (except that it's bigger than PIPE_BUF).
Currently that limit is the system page size, but we might want to
explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface,
allowing us to stop having to care so deeply about exact packet sizes
(which have had bugs with 32/64-bit compatibility modes).  But user
space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will
fail with an EINVAL on kernels that do not support this interface.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org  # needed for systemd/autofs interaction fix
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are some tiny drivers/staging/ bugfixes.  Some build fixes that
  were recently reported, as well as one kfree bug that is hitting a
  number of users."

* tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ozwpan: Fix bug where kfree is called twice.
  staging: octeon-ethernet: fix build errors by including interrupt.h
  staging: zcache: fix Kconfig crypto dependency
  staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

Pull btrfs fixes from Chris Mason:
 "This has our collection of bug fixes.  I missed the last rc because I
  thought our patches were making NFS crash during my xfs test runs.
  Turns out it was an NFS client bug fixed by someone else while I tried
  to bisect it.

  All of these fixes are small, but some are fairly high impact.  The
  biggest are fixes for our mount -o remount handling, a deadlock due to
  GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.

  This was tested against both 3.3 and Linus' master as of this morning."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
  Btrfs: reduce lock contention during extent insertion
  Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
  Btrfs: Fix space checking during fs resize
  Btrfs: fix block_rsv and space_info lock ordering
  Btrfs: Prevent root_list corruption
  Btrfs: fix repair code for RAID10
  Btrfs: do not start delalloc inodes during sync
  Btrfs: fix that check_int_data mount option was ignored
  Btrfs: don't count CRC or header errors twice while scrubbing
  Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
  btrfs: don't return EINTR
  Btrfs: double unlock bug in error handling
  Btrfs: always store the mirror we read the eb from
  fs/btrfs/volumes.c: add missing free_fs_devices
  btrfs: fix early abort in 'remount'
  Btrfs: fix max chunk size check in chunk allocator
  Btrfs: add missing read locks in backref.c
  Btrfs: don't call free_extent_buffer twice in iterate_irefs
  Btrfs: Make free_ipath() deal gracefully with NULL pointers
  Btrfs: avoid possible use-after-free in clear_extent_bit()
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Nothing controversial, just another batch of fixes:

   - Samsung/exynos fixes for more merge window fallout: build errors
     and warnings mostly, but also some clock/device setup issues on
     exynos4/5
   - PXA bug and warning fixes related to gpio and pinmux
   - IRQ domain conversion bugfixes for U300 and MSM
   - A regulator setup fix for U300"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PXA2xx: MFP: fix potential direction bug
  ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT
  arm/sa1100: fix sa1100-rtc memory resource
  ARM: pxa: fix gpio wakeup setting
  ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability
  ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined
  ARM: EXYNOS: Fix resource on dev-dwmci.c
  ARM: S3C24XX: Fix build warning for S3C2410_PM
  ARM: mini2440_defconfig: Fix build error
  ARM: msm: Fix gic irqdomain support
  ARM: EXYNOS: Fix incorrect initialization of GIC
  ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
  ARM: u300: bump all IRQ numbers by one
  ARM: ux300: Fix unimplementable regulation constraints

Pull drm fixes from Dave Airlie:
 "As soon as I sent the non-urgent stack, two important fixes come in:

   - i915: fixes SNB GPU hangs in a number of 3D apps

   - radeon: initial fix for VGA on LLano system, 3 or 4 of us have
     spent time debugging this, and Jerome finally figured out the magic
     bit the BIOS/fglrx set that we didn't.  This at least should get
     things working, there may be future reliability fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
  drm/radeon/kms: need to set up ss on DP bridges as well

This reverts commit a32744d4.

While that commit was technically the right thing to do, and made the
x86-64 compat mode work identically to native 32-bit mode (and thus
fixing the problem with a 32-bit systemd install on a 64-bit kernel), it
turns out that the automount binaries had workarounds for this compat
problem.

Now, the workarounds are disgusting: doing an "uname()" to find out the
architecture of the kernel, and then comparing it for the 64-bit cases
and fixing up the size of the read() in automount for those.  And they
were confused: it's not actually a generic 64-bit issue at all, it's
very much tied to just x86-64, which has different alignment for an
'u64' in 64-bit mode than in 32-bit mode.

But the end result is that fixing the compat layer actually breaks the
case of a 32-bit automount on a x86-64 kernel.

There are various approaches to fix this (including just doing a
"strcmp()" on current->comm and comparing it to "automount"), but I
think that I will do the one that teaches pipes about a special "packet
mode", which will allow user space to not have to care too deeply about
the padding at the end of the autofs packet.

That change will make the compat workaround unnecessary, so let's revert
it first, and get automount working again in compat mode.  The
packetized pipes will then fix autofs for systemd.
Reported-and-requested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Ian Kent <raven@themaw.net>
Cc: stable@kernel.org # for 3.3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in
OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when
using separate stencil buffers.  Without it, the GPU tries to use the
LRA eviction policy, which isn't supported.  This was supposed to be off
by default, but seems to be on for many machines.

This cannot be done in gen6_init_clock_gating with most of the other
workaround bits; the render ring needs to exist.  Otherwise, the
register write gets dropped on the floor (one printk will show it
changed, but a second printk immediately following shows the value
reverts to the old one).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535
Cc: stable@vger.kernel.org
Cc: Rob Castle <futuredub@gmail.com>
Cc: Eric Appleman <erappleman@gmail.com>
Cc: aaron667@gmx.net
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Makes Nutmeg DP to VGA bridges work for me.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=42490

Noticed by Jerome Glisse (after weeks of debugging).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  Use correct conversion specifiers in cifs_show_options
  CIFS: Show backupuid/gid in /proc/mounts
  cifs: fix offset handling in cifs_iovec_write

Merge tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Some of these had been in existence since the 2.6.27 days, some since
  3.0 - and some due to new features added in v3.4.

  The one that is most interesting is David's one - in the low-level
  assembler code we had be checking events needlessly.  With his patch
  now we do it when the appropriate flag is set - with the added benefit
  that we can process events faster.  Stefano's is fixing a mistake
  where the Linux IRQ numbers were ACK-ed instead of the Xen IRQ,
  resulting in missing interrupts.  The other ones are bootup related
  that can show up on various hardware."

 - In the low-level assembler code we would jump to check events even if
   none were present.  This incorrect behavior had been there since
   2.6.27 days!
 - When using the fast-path for ACK-ing interrupts we were using the
   Linux IRQ numbers instead of the Xen ones (and they can differ) and
   missing interrupts in process.
 - Fix bootup crashes when ACPI hotplug CPUs were present and they would
   expand past the set number of CPUs we were allocated.
 - Deal with broken BIOSes when uploading C-states to the hypervisor.
 - Disable the cpuid check for MWAIT_LEAF if the ACPI PAD driver is
   loaded.  If the ACPI PAD driver is used it will crash, so lets not
   export the functionality so the ACPI PAD driver won't load.

* tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: correctly check for pending events when restoring irq flags
  xen/acpi: Workaround broken BIOSes exporting non-existing C-states.
  xen/smp: Fix crash when booting with ACPI hotplug CPUs.
  xen: use the pirq number to check the pirq_eoi_map
  xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded.