- 13 Jan, 2021 23 commits
-
-
Marc Kleine-Budde authored
This patch moves the skb related code of the CAN device infrastructure into a separate file. Reviewed-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-6-mkl@pengutronix.deSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
This patch moves all CAN frame length related code of the CAN device infrastructure into a separate file. Reviewed-by:
-
Marc Kleine-Budde authored
This patch moves the bittiming related code of the CAN device infrastructure into a separate file. Reviewed-by:
-
Marc Kleine-Budde authored
This patch moves the CAN driver related infrastructure into a separate subdir. It will be split into more files in the coming patches. Reviewed-by:
-
Marc Kleine-Budde authored
This patch add the can-ml.h to the list of maintained files of the CAN network layer. Fixes: ffd956ee ("can: introduce CAN midlayer private and allocate it automatically") Reviewed-by:
-
Lukas Bulwahn authored
Commit 7813887e ("can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.c") and commit 67def4ef ("can: tcan4x5x: move regmap code into seperate file") split the file tcan4x5x.c into two files, but missed to adjust the TI TCAN4X5X DEVICE DRIVER section in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: drivers/net/can/m_can/tcan4x5x.c Adjust the file entry in MAINTAINERS to the tcan4x5x file splitting. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Fixes: 67def4ef ("can: tcan4x5x: move regmap code into seperate file") Fixes: 7813887e ("can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.c") Link: https://lore.kernel.org/r/20210108073932.20804-1-lukas.bulwahn@gmail.comSigned-off-by:
-
YANG LI authored
Fix the following coccicheck warning: ./net/nfc/hci/llc_shdlc.c:239:5-21: WARNING: Comparison to bool Signed-off-by:
YANG LI <abaci-bugfix@linux.alibaba.com> Reported-by: Abaci Robot<abaci@linux.alibaba.com> Link: https://lore.kernel.org/r/1610357063-57705-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== net: dsa: add stats64 support changes v8: - stats.no_handler should not be assigned from HW stats changes v7: - move raw.filtered from rx_errors to rx_dropped counter changes v6: - move stats64 callback to ethtool section - ar9331: diff. fixes - ar9331: move stats calculation to the worker - ar9331: extend rx/tx error counters - use spin lock instead of u64_stats* changes v5: - read all stats in one regmap_bulk_read() request - protect stats with u64_stats* helpers. changes v4: - do no read MIBs withing stats64 call - change polling frequency to 0.3Hz changes v3: - fix wrong multiplication - cancel port workers on remove changes v2: - use stats64 instead of get_ethtool_stats - add worked to poll for the stats ==================== Link: https://lore.kernel.org/r/20210111104658.21930-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Add stats support for the ar9331 switch. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
Allow DSA drivers to export stats64 Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Alex Elder authored
The IPA driver depends on some SMEM functionality (qcom_smem_init(), qcom_smem_alloc(), and qcom_smem_virt_to_phys()), but this is not reflected in the configuration dependencies. Add a dependency on QCOM_SMEM to avoid attempts to build the IPA driver without SMEM. This avoids a link error for certain configurations. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: 38a4066f ("net: ipa: support COMPILE_TEST") Signed-off-by:
Alex Elder <elder@linaro.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210112192134.493-1-elder@linaro.orgSigned-off-by:
-
Maxim Kochetkov authored
Set proper value to IF_MODE register for MII mode. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20210111043903.8044-1-fido_max@inbox.ruSigned-off-by:
-
Russell King authored
Add debugfs support to SFP so that the internal state of the SFP state machines and hardware signal state can be viewed from userspace, rather than having to compile a debug kernel to view state transitions in the kernel log. The 'state' output looks like: Module state: empty Module probe attempts: 0 0 Device state: up Main state: down Fault recovery remaining retries: 5 PHY probe remaining retries: 12 moddef0: 0 rx_los: 1 tx_fault: 1 tx_disable: 1 Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1kyYRe-0004kN-3F@rmk-PC.armlinux.org.ukSigned-off-by:
-
Jakub Kicinski authored
Long Li says: ==================== hv_netvsc: Prevent packet loss during VF add/remove This patch set fixes issues with packet loss on VF add/remove. ==================== Link: https://lore.kernel.org/r/1610153623-17500-1-git-send-email-longli@linuxonhyperv.comSigned-off-by:
-
Long Li authored
On VF hot remove, NETDEV_GOING_DOWN is sent to notify the VF is about to go down. At this time, the VF is still sending/receiving traffic and we request the VSP to switch datapath. On completion, the datapath is switched to synthetic and we can proceed with VF hot remove. Signed-off-by:
Long Li <longli@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Long Li authored
The completion indicates if NVSP_MSG4_TYPE_SWITCH_DATA_PATH has been processed by the VSP. The traffic is steered to VF or synthetic after we receive this completion. Signed-off-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Long Li authored
The driver needs to check if the datapath has been switched to VF before sending traffic to VF. Signed-off-by:
-
Bhaskar Chowdhury authored
s/oen/one/ s/controling/controlling/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: further improvements Series includes further smaller improvements. ==================== Link: https://lore.kernel.org/r/1bc3b7ef-b54a-d517-df54-27d61ca7ba94@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Instead of doing the full DASH check each time r8168_check_dash() is called, let's do it once in probe and store DASH capabilities in a new rtl8169_private member. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Heiner Kallweit authored
Extend the mask to include the checksum failure bits. This allows to simplify the condition in rtl8169_rx_csum(). Signed-off-by:
-
Heiner Kallweit authored
At least from chip version 25 the vendor driver sets these rx flags for all chip versions if WOL is enabled. Therefore I wouldn't consider it a quirk, so let's rename the function. Signed-off-by:
-
Marek Vasut authored
The PHYLIB must be selected to provide mdiobus_*() functions, and the MICREL_PHY is necessary too, as that is the only possible PHY attached to the KS8851 (it is the internal PHY). Fixes: ef363122 ("net: ks8851: Register MDIO bus and the internal PHY") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by:
-
- 12 Jan, 2021 17 commits
-
-
Stefan Chulski authored
Patch didn't fix any issue, just improve parse flow and align ipv4 parse flow with ipv6 parse flow. Currently ipv4 kenguru parser first check IP protocol(TCP/UDP) and then destination IP address. Patch introduce reverse ipv4 parse, first destination IP address parsed and only then IP protocol. This would allow extend capability for packet L4 parsing and align ipv4 parsing flow with ipv6. Suggested-by:
Liron Himi <liron@marvell.com> Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1610289059-14962-1-git-send-email-stefanc@marvell.comSigned-off-by:
-
Danilo Carvalho authored
List of things fixed: - Two of the socket options were idented with spaces instead of tabs. - Trailing whitespace in some lines. - Improper spacing around parenthesis caught by checkpatch.pl. - Mix of space and tabs in tcp_word_hdr union. Signed-off-by:
Danilo Carvalho <doak@google.com> Link: https://lore.kernel.org/r/20210108222104.2079472-1-doak@google.comSigned-off-by:
-
Jakub Kicinski authored
bareudp_dellink() only needs the device list to hand it to unregister_netdevice_queue(). We can pass NULL in, and unregister_netdevice_queue() will do the unregistering. There is no chance for batching on the error path, anyway. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: improve PLL power-down handling This series includes improvements to handling of PLL power-down. ==================== Link: https://lore.kernel.org/r/1608dfa3-c4a5-0e92-31f7-76674b3c173a@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Clean up the remainings of rtl_pll_power_down/up and rename rtl_pll_power_down() to rtl_prepare_power_down(). Signed-off-by:
-
Heiner Kallweit authored
Realtek provided a description of bits 6 and 7 in register PMCH. They configure whether the chip powers down certain PLL in D3hot and D3cold respectively. They do not actually power down the PLL. Reflect this in the code and configure D3 PLL powerdown based on whether WOL is enabled. Signed-off-by:
-
Heiner Kallweit authored
There's no known reason why PLL powerdown on D3 shouldn't be enabled on chip versions 34, 35, 36, and 42. At least the vendor driver doesn't exclude any of these chip versions. Signed-off-by:
-
Heiner Kallweit authored
Instead of open-coding unaligned access let's use the predefined unaligned access helpers. Signed-off-by:
-
Jakub Kicinski authored
Heiner Kallweit says: ==================== r8169: improve jumbo configuration Small improvements to jumbo configuration. ==================== Link: https://lore.kernel.org/r/1dd337a0-ff5a-3fa0-91f5-45e86c0fce58@gmail.comSigned-off-by:
-
Heiner Kallweit authored
So far we don't increase the max read request size if we switch to jumbo mode before bringing up the interface for the first time. Let's change this. Signed-off-by:
-
Heiner Kallweit authored
Align behavior with r8168 vendor driver and don't reduce max read request size for RTL8168e in jumbo mode. Signed-off-by:
-
Florian Fainelli authored
The function was incorrectly named with a trailing 'r' at the end of prestera. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210109050622.8081-1-f.fainelli@gmail.comSigned-off-by:
-
Russell King authored
Convert at803x_clk_out_config() to use phy_modify_mmd(). Signed-off-by:
-
Russell King authored
Extend the bitrate-derived support to include 2500BASE-X for modules that report a bitrate of 2500Mbaud. Signed-off-by:
-
Russell King authored
The SFP MSA defines two option bits in byte 65 to indicate how the Rx_LOS signal on SFP pin 8 behaves: bit 2 - Loss of Signal implemented, signal inverted from standard definition in SFP MSA (often called "Signal Detect"). bit 1 - Loss of Signal implemented, signal as defined in SFP MSA (often called "Rx_LOS"). Clearly, setting both bits results in a meaningless situation: it would mean that LOS is implemented in both the normal sense (1 = signal loss) and inverted sense (0 = signal loss). Unfortunately, there are modules out there which set both bits, which will be initially interpret as "inverted" sense, and then, if the LOS signal changes state, we will toggle between LINK_UP and WAIT_LOS states. Change our LOS handling to give well defined behaviour: only interpret these bits as meaningful if exactly one is set, otherwise treat it as if LOS is not implemented. Signed-off-by: -
Vladimir Oltean authored
The code that sets the DMA mask to 64 bits is bogus, it is taken from the enetc driver together with the rest of the PCI probing boilerplate. Since this patch is touching the error path to delete err_dma, let's also change the err_alloc_felix label which was incorrect. The kzalloc failure does not need a kfree, but it doesn't hurt either, since kfree works with NULL pointers. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Get rid of the switchdev transactional model Changes in v4: - Fixed build error in dsa_loop and build warning in hellcreek driver. - Scheduling the mlxsw SPAN work item regardless of the VLAN add return code, as per Ido's and Petr's request. Changes in v3: - Resolved a build warning in mv88e6xxx and tested that it actually works properly, which resulted in an extra patch (02/11). - Addressed Ido's minor feedback in commit 10/11 relating to a comment. Changes in v2: - Got rid of the vid_begin -> vid_end range too from the switchdev API. - Actually propagating errors from DSA MDB and VLAN notifiers. This series comes after the late realization that the prepare/commit separation imposed by switchdev does not help literally anybody: https://patchwork.kernel.org/project/netdevbpf/patch/20201212203901.351331-1-vladimir.oltean@nxp.com/ We should kill it before it inflicts even more damage to the error handling logic in drivers. Also remove the unused VLAN ranges feature from the switchdev VLAN objects, which simplifies all drivers by quite a bit. ==================== Link: https://lore.kernel.org/r/20210109000156.1246735-1-olteanv@gmail.comSigned-off-by:
-
