There is no need to declare separate key on stack,
we can just use sw_flow->key to store the key directly.

This commit fixes following warning:

net/openvswitch/datapath.c: In function ‘ovs_flow_cmd_new’:
net/openvswitch/datapath.c:1080:1: warning: the frame size of 1040 bytes
is larger than 1024 bytes [-Wframe-larger-than=]
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2016-09-19

Here's the main bluetooth-next pull request for the 4.9 kernel.

 - Added new messages for monitor sockets for better mgmt tracing
 - Added local name and appearance support in scan response
 - Added new Qualcomm WCNSS SMD based HCI driver
 - Minor fixes & cleanup to 802.15.4 code
 - New USB ID to btusb driver
 - Added Marvell support to HCI UART driver
 - Add combined LED trigger for controller power
 - Other minor fixes here and there

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Dmitry Vyukov wrote:
> different runs). Looking at code, the following looks suspicious -- we
> limit copy by 512 bytes, but use the original count which can be
> larger than 512:
>
> static void sixpack_receive_buf(struct tty_struct *tty,
>     const unsigned char *cp, char *fp, int count)
> {
>     unsigned char buf[512];
>     ....
>     memcpy(buf, cp, count < sizeof(buf) ? count : sizeof(buf));
>     ....
>     sixpack_decode(sp, buf, count1);

With the sane tty locking we now have I believe the following is safe as
we consume the bytes and move them into the decoded buffer before
returning.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct drop handling for XDP_TX on TX failure, were recently added in
commit 95357907 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX
ring full").

The change missed an opportunity for recycling the RX page, instead of
going through the page allocator, like the regular XDP_DROP action does.
This patch cease the opportunity, by going through the XDP_DROP case.

Fixes: 95357907 ("mlx4: fix XDP_TX is acting like XDP_PASS on TX ring full")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

John Crispin says:

====================
net-next: dsa: set_addr should be optional

The Marvell driver is the only one that actually sets the switches HW
address. All other drivers have an empty stub. fix this by making the
callback optional.
====================
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The set_addr() callback is now optional. Remove the empty stub that qca8k
has.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The set_addr() callback is now optional. Remove the empty stub that b53
has.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only 1 of the 3 drivers currently has a set_addr() operation. Make the
set_addr() callback optional to reduce the amount of empty stubs inside
the drivers.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 83c0afae ("net: dsa: Add new binding implementation")
has a duplicate invocation of the set_addr() operation callback. Remove one
of them.
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: rhashtable with duplicate objects

v3 fixes a bug in the remove path that causes the element count
to decrease when it shouldn't, leading to a gigantic hash table
when it underflows.

v2 contains a reworked insertion slowpath to ensure that the
spinlock for the table we're inserting into is taken.

This series contains two patches.  The first adds the rhlist
interface and the second converts mac80211 to use it.  If this
works out I'll then proceed to convert the other insecure_elasticity
users over to this.

I've tested the rhlist code with test_rhashtable but I haven't
tested the mac80211 conversion.  So please give it a go and see
if it still works.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211 currently uses rhashtable with insecure_elasticity set
to true.  The latter is because of duplicate objects.  What's
more, mac80211 walks the rhashtable chains by hand which is broken
as rhashtable may contain multiple tables due to resizing or
rehashing.

This patch fixes it by converting it to the newly added rhltable
interface which is designed for use with duplicate objects.

With rhltable a lookup returns a list of objects instead of a
single one.  This is then fed into the existing for_each_sta_info
macro.

This patch also deletes the sta_addr_hash function since rhashtable
defaults to jhash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The insecure_elasticity setting is an ugly wart brought out by
users who need to insert duplicate objects (that is, distinct
objects with identical keys) into the same table.

In fact, those users have a much bigger problem.  Once those
duplicate objects are inserted, they don't have an interface to
find them (unless you count the walker interface which walks
over the entire table).

Some users have resorted to doing a manual walk over the hash
table which is of course broken because they don't handle the
potential existence of multiple hash tables.  The result is that
they will break sporadically when they encounter a hash table
resize/rehash.

This patch provides a way out for those users, at the expense
of an extra pointer per object.  Essentially each object is now
a list of objects carrying the same key.  The hash table will
only see the lists so nothing changes as far as rhashtable is
concerned.

To use this new interface, you need to insert a struct rhlist_head
into your objects instead of struct rhash_head.  While the hash
table is unchanged, for type-safety you'll need to use struct
rhltable instead of struct rhashtable.  All the existing interfaces
have been duplicated for rhlist, including the hash table walker.

One missing feature is nulls marking because AFAIK the only potential
user of it does not need duplicate objects.  Should anyone need
this it shouldn't be too hard to add.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Small packet loss is reported on complex multi host network configurations
including tunnels, NAT, ... My investigation led me to the following check
in netback which drops packets:

        if (unlikely(txreq.size < ETH_HLEN)) {
                netdev_err(queue->vif->dev,
                           "Bad packet size: %d\n", txreq.size);
                xenvif_tx_err(queue, &txreq, extra_count, idx);
                break;
        }

But this check itself is legitimate. SKBs consist of a linear part (which
has to have the ethernet header) and (optionally) a number of frags.
Netfront transmits the head of the linear part up to the page boundary
as the first request and all the rest becomes frags so when we're
reconstructing the SKB in netback we can't distinguish between original
frags and the 'tail' of the linear part. The first SKB needs to be at
least ETH_HLEN size. So in case we have an SKB with its linear part
starting too close to the page boundary the packet is lost.

I see two ways to fix the issue:
- Change the 'wire' protocol between netfront and netback to start keeping
  the original SKB structure. We'll have to add a flag indicating the fact
  that the particular request is a part of the original linear part and not
  a frag. We'll need to know the length of the linear part to pre-allocate
  memory.
- Avoid transmitting SKBs with linear parts starting too close to the page
  boundary. That seems preferable short-term and shouldn't bring
  significant performance degradation as such packets are rare. That's what
  this patch is trying to achieve with skb_copy().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All the review comments updated and resending for review.

This is MAC interface feature.
Microsemi PHY can support RGMII, RMII or GMII/MII interface between MAC and PHY.
MAC-IF function program the right value based on Device tree configuration.

Tested on Beaglebone Black with VSC 8531 PHY.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol
'mlxsw_sp_span_entry_find' was not declared. Should it be static?
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol
'mlxsw_sp_span_entry_get' was not declared. Should it be static?
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing
different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56:     int enum
mlxsw_sp_span_type  versus
drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56:     int enum
mlxsw_reg_mpar_i_e
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32:     int
enum mlxsw_reg_sbxx_dir  versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32:     int
enum devlink_sb_pool_type
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39:     int
enum mlxsw_reg_sbpr_mode  versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39:     int
enum devlink_sb_threshold_type
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning:
mixing different enum types
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54:     int
enum mlxsw_sp_l3proto  versus
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54:     int
enum mlxsw_reg_ralxx_protocol
...
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning:
symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static?
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the RX hash function from XOR to CRC in order to have better
distribution of the traffic.
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_hwrm_fw_set_time() now returns -EOPNOTSUPP when built for kernel
without RTC_LIB.  Setting the firmware time is not critical to the
successful completion of the firmware update process.
Signed-off-by: Rob Swindell <Rob.Swindell@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

setting conforming action to drop is a valid policy.
When it is set we need to at least see the stats indicating it
for debugging.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sample use case of how this is encoded:
user space via tuntap (or a connected VM/Machine/container)
encodes the tcindex TLV.

Sample use case of decoding:
IFE action decodes it and the skb->tc_index is then used to classify.
So something like this for encoded ICMP packets:

.. first decode then reclassify... skb->tcindex will be set
sudo $TC filter add dev $ETH parent ffff: prio 2 protocol 0xbeef \
u32 match u32 0 0 flowid 1:1 \
action ife decode reclassify

...next match the decode icmp packet...
sudo $TC filter add dev $ETH parent ffff: prio 4 protocol ip \
u32 match ip protocol 1 0xff flowid 1:1 \
action continue

... last classify it using the tcindex classifier and do someaction..
sudo $TC filter add dev $ETH parent ffff: prio 5 protocol ip \
handle 0x11 tcindex classid 1:1 \
action blah..
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

encoder and checker for 16 bits metadata
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 2 warnings when building kernel with W=1:
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:463:5: warning: no previous prototype for 'esw_offloads_init' [-Wmissing-prototypes]
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:521:6: warning: no previous prototype for 'esw_offloads_cleanup' [-Wmissing-prototypes]

In fact, both functions are declared in
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c,but should be
declared in a header file, thus can be recognized in other file.

So this patch moves the declarations into
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 4 warnings when building kernel with W=1:
drivers/net/ethernet/emulex/benet/be_main.c:4368:6: warning: no previous prototype for 'be_calculate_pf_pool_rss_tables' [-Wmissing-prototypes]
drivers/net/ethernet/emulex/benet/be_cmds.c:4385:5: warning: no previous prototype for 'be_get_nic_pf_num_list' [-Wmissing-prototypes]
drivers/net/ethernet/emulex/benet/be_cmds.c:4537:6: warning: no previous prototype for 'be_reset_nic_desc' [-Wmissing-prototypes]
drivers/net/ethernet/emulex/benet/be_cmds.c:4910:5: warning: no previous prototype for '__be_cmd_set_logical_link_config' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/phy/microchip.c:58:5: warning: no previous prototype for 'lan88xx_suspend' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt: update for net-next.

Misc. changes and minor bug fixes for net-next.  Please review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The VF link state can be changed via the 'ip link set' cmd.
Currently, the new link state does not take effect immediately.

The fix is for the PF to send a link change async event to the
designated VF after a VF link state change.  This async event will
trigger the VF to update the link status.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restart autoneg if autoneg is enabled.
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hardware has a limitation that it won't pass host to BMC loopback
packets below 52-bytes.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After generating the random MAC address for VF, call the firmware to
approve it.  This step serves 2 purposes.  Some hypervisor (e.g. ESX)
wants to approve the MAC address.  2nd, the call will setup the
proper forwarding database in the internal switch.

We need to unlock the hwrm_cmd_lock mutex before calling bnxt_approve_mac().
We can do that because we are at the end of the function and all the
previous firmware response data has been copied.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Re-arrange the code so that the generation of the random MAC address for
the VF is at the end of the function.  The next patch will add one more step
to call bnxt_approve_mac() to get the firmware to approve the random MAC
address.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing code is inconsistent in reporting and accepting the combined
channel count.  bnxt_get_channels() reports maximum combined as the
maximum rx count.  bnxt_set_channels() accepts combined count that
cannot be bigger than max rx or max tx.

For example, if max rx = 2 and max tx = 1, we report max supported
combined to be 2.  But if the user tries to set combined to 2, it will
fail because 2 is bigger than max tx which is 1.

Fix the code to be consistent.  Max allowed combined = max(max_rx, max_tx).
We will accept a combined channel count <= max(max_rx, max_tx).
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using Ethtool flashdev command, entire NVM package (*.pkg) files
may now be staged into the "update" area of the NVM and subsequently
verified and installed by the firmware using the newly introduced
command: NVM_INSTALL_UPDATE.

We also introduce use of the new firmware command FW_SET_TIME so that the
NVM-resident package installation log contains valid time-stamps.
Signed-off-by: Rob Swindell <Rob.Swindell@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove "Single-port/Dual-port" from the device names.  Dual-port devices
will appear as 2 separate devices, so no need to call each a dual-port
device.  Use a more generic name for VF devices belonging to the same
chip fanmily.  Add some remaining NPAR device IDs.
Signed-off-by: David Christensen <david.christensen@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

And remove redundant definitions of the same flags.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>