Patch series "Improve mm documentation".

If you build with W=1, kernel-doc complains about tlb_flush_rmaps().  Then
I ran scripts/find-unused-docs.sh against mm/ and found a large number of
files which weren't included in the ReST documentation.  I fixed up a
couple of them, and added all those without erros to the rst files. 
There's a lot more work to do to organise all of this, but at least now if
we have documentation that refers to these functions, we'll get a nice
link to them.


This patch (of 4):

The vma parameter wasn't described.

Link: https://lkml.kernel.org/r/20230818200630.2719595-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230818200630.2719595-2-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove the unnecessary encoding of page order into an enum and pass the
page order directly.  That lets us get rid of pe_order().

The switch constructs have to be changed to if/else constructs to prevent
GCC from warning on builds with 3-level page tables where PMD_ORDER and
PUD_ORDER have the same value.

If you are looking at this commit because your driver stopped compiling,
look at the previous commit as well and audit your driver to be sure it
doesn't depend on mmap_lock being held in its ->huge_fault method.

[willy@infradead.org: use "order %u" to match the (non dev_t) style]
  Link: https://lkml.kernel.org/r/ZOUYekbtTv+n8hYf@casper.infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-4-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove the checks for the VMA lock being held, allowing the page fault
path to call into the filesystem instead of retrying with the mmap_lock
held.  This will improve scalability for DAX page faults.  Also update the
documentation to match (and fix some other changes that have happened
recently).

Link: https://lkml.kernel.org/r/20230818202335.2739663-3-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Change calling convention for ->huge_fault", v2.

There are two unrelated changes to the calling convention for
->huge_fault.  I've bundled them together to help people notice the
change.  The first is to improve scalability of DAX page faults by
allowing them to be handled under the VMA lock.  The second is to remove
enum page_entry_size since it's really unnecessary.  The changelogs and
documentation updates hopefully work to that end.


This patch (of 3):

Allow this to be used in generic code.  Also add PUD_ORDER.

Link: https://lkml.kernel.org/r/20230818202335.2739663-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230818202335.2739663-2-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since pte_index is always defined, we don't need to check whether it's
defined or not.  Delete the slow version that doesn't depend on it and
remove the #define since nobody needs to test for it.

Link: https://lkml.kernel.org/r/20230819031837.3160096-1-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Christian Dietrich <stettberger@dokucode.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

__mem_cgroup_uncharge_swap is only called in mem_cgroup_uncharge_swap, if
mem cgroup is disabled, __mem_cgroup_uncharge_swap cannot be called. 
Therefore, there is no need to judge whether mem_cgroup is disabled or
not.

Link: https://lkml.kernel.org/r/20230819081302.1217098-1-lujialin4@huawei.comSigned-off-by: Lu Jialin <lujialin4@huawei.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Let's work on folio->swap instead.  While at it, use folio_test_anon() and
folio_test_swapcache() -- the original folio remains valid even after
splitting (but is then an order-0 folio).

We can probably convert a lot more to folios in that code, let's focus on
folio->swap handling only for now.

Link: https://lkml.kernel.org/r/20230821160849.531668-5-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Let's simply work on the folio directly and remove the helpers.

Link: https://lkml.kernel.org/r/20230821160849.531668-4-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Let's stop working on the private field and use an explicit swap field. 
We have to move the swp_entry_t typedef.

Link: https://lkml.kernel.org/r/20230821160849.531668-3-david@redhat.comSigned-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Chris Li <chrisl@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm/swap: stop using page->private on tail pages for THP_SWAP
+ cleanups".

This series stops using page->private on tail pages for THP_SWAP, replaces
folio->private by folio->swap for swapcache folios, and starts using
"new_folio" for tail pages that we are splitting to remove the usage of
page->private for swapcache handling completely.


This patch (of 4):

Let's stop using page->private on tail pages, making it possible to just
unconditionally reuse that field in the tail pages of large folios.

The remaining usage of the private field for THP_SWAP is in the THP
splitting code (mm/huge_memory.c), that we'll handle separately later.

Update the THP_SWAP documentation and sanity checks in mm_types.h and
__split_huge_page_tail().

[david@redhat.com: stop using page->private on tail pages for THP_SWAP]
  Link: https://lkml.kernel.org/r/6f0a82a3-6948-20d9-580b-be1dbf415701@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230821160849.531668-2-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>	[arm64]
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Remove comparing pointer to 0 to avoid this warning from coccinelle:

./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0, suggest !E
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0

Link: https://lkml.kernel.org/r/20230817160033.90079-1-tuananhlfc@gmail.comSigned-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently, not all kernel memory usage is being accounted for. This
commit switches to using the kernel entry within memory.stat which
already includes kernel_stack, pagetables, and slab. The kernel entry
also includes vmalloc and other additional kernel memory use cases which
were missing.

Link: https://lkml.kernel.org/r/bvrhe2tpsts2azaroq4ubp2slawmop6orndsswrewuscw3ugvk@kmemmrttsnc7Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since commit 7f3bfab5 ("mm/gup: take mmap_lock in get_dump_page()"),
which landed in v5.10, core dumping doesn't enter fault handling without
holding the mmap_lock anymore.  Remove the stale parts of the comments,
but leave the behavior as-is - letting core dumping block on userfault
handling would be a bad idea and could lead to deadlocks if the dumping
process was handling its own userfaults.

Link: https://lkml.kernel.org/r/20230815212216.264445-1-jannh@google.comSigned-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

In clear_flush(), the original pte may be a present entry, so we should
use ptep_clear() to let page_table_check track the pte clearing operation,
otherwise it may cause false positive in subsequent set_pte_at().

Link: https://lkml.kernel.org/r/20230810093241.1181142-1-qi.zheng@linux.dev
Fixes: 42b25471 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pass the vm_fault to the architecture to help it make smarter decisions
about which PTEs to insert into the TLB.

Link: https://lkml.kernel.org/r/20230802151406.3735276-39-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Call set_pte_range() once per contiguous range of the folio instead of
once per page.  This batches the updates to mm counters and the rmap.

With a will-it-scale.page_fault3 like app (change file write fault testing
to read fault testing.  Trying to upstream it to will-it-scale at [1]) got
15% performance gain on a 48C/96T Cascade Lake test box with 96 processes
running against xfs.

Perf data collected before/after the change:
  18.73%--page_add_file_rmap
          |
           --11.60%--__mod_lruvec_page_state
                     |
                     |--7.40%--__mod_memcg_lruvec_state
                     |          |
                     |           --5.58%--cgroup_rstat_updated
                     |
                      --2.53%--__mod_lruvec_state
                                |
                                 --1.48%--__mod_node_page_state

  9.93%--page_add_file_rmap_range
         |
          --2.67%--__mod_lruvec_page_state
                    |
                    |--1.95%--__mod_memcg_lruvec_state
                    |          |
                    |           --1.57%--cgroup_rstat_updated
                    |
                     --0.61%--__mod_lruvec_state
                               |
                                --0.54%--__mod_node_page_state

The running time of __mode_lruvec_page_state() is reduced about 9%.

[1]: https://github.com/antonblanchard/will-it-scale/pull/37

Link: https://lkml.kernel.org/r/20230802151406.3735276-38-willy@infradead.orgSigned-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

set_pte_range() allows to setup page table entries for a specific
range.  It takes advantage of batched rmap update for large folio.
It now takes care of calling update_mmu_cache_range().

Link: https://lkml.kernel.org/r/20230802151406.3735276-37-willy@infradead.orgSigned-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

folio_add_file_rmap_range() allows to add pte mapping to a specific range
of file folio.  Comparing to page_add_file_rmap(), it batched updates
__lruvec_stat for large folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-36-willy@infradead.orgSigned-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

filemap_map_folio_range() maps partial/full folio.  Comparing to original
filemap_map_pages(), it updates refcount once per folio instead of per
page and gets minor performance improvement for large folio.

With a will-it-scale.page_fault3 like app (change file write fault testing
to read fault testing.  Trying to upstream it to will-it-scale at [1]),
got 2% performance gain on a 48C/96T Cascade Lake test box with 96
processes running against xfs.

[1]: https://github.com/antonblanchard/will-it-scale/pull/37

Link: https://lkml.kernel.org/r/20230802151406.3735276-35-willy@infradead.orgSigned-off-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Push the iteration over each page down to the architectures (many can
flush the entire THP without iteration).

Link: https://lkml.kernel.org/r/20230802151406.3735276-34-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Now that all architectures are converted, we can remove the PFN_PTE_SHIFT
ifdef and we can define set_pte_at() unconditionally.

Link: https://lkml.kernel.org/r/20230802151406.3735276-33-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Move the default (no-op) implementation of flush_icache_pages() to
<linux/cacheflush.h> from <asm-generic/cacheflush.h>.  Remove the
flush_icache_page() wrapper from each architecture into
<linux/cacheflush.h>.

Link: https://lkml.kernel.org/r/20230802151406.3735276-32-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This function has no more users.

Link: https://lkml.kernel.org/r/20230802151406.3735276-31-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages().

Link: https://lkml.kernel.org/r/20230802151406.3735276-30-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT and a noop update_mmu_cache_range().

Link: https://lkml.kernel.org/r/20230802151406.3735276-29-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT and update_mmu_cache_range().

Link: https://lkml.kernel.org/r/20230802151406.3735276-28-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes(), update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages().  Convert the PG_dcache_dirty flag from being
per-page to per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-27-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages().

Link: https://lkml.kernel.org/r/20230802151406.3735276-26-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages().  Change the PG_dcache_clean flag from being per-page
to per-folio.  Flush the entire folio containing the pages in
flush_icache_pages() for ease of implementation.

Link: https://lkml.kernel.org/r/20230802151406.3735276-25-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes() and update_mmu_cache_range().

Link: https://lkml.kernel.org/r/20230802151406.3735276-24-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio().  Change
the PG_dcache_clean flag from being per-page to per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-23-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio().  Change
the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page to per-folio.

[willy@infradead.org: re-export flush_dcache_icache_folio()]
  Link: https://lkml.kernel.org/r/ZMx1daYwvD9EM7Cv@casper.infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-22-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes(), update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages().  Change the PG_arch_1 (aka PG_dcache_dirty) flag
from being per-page to per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-21-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range() and flush_dcache_folio(). 
Change the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page to
per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-20-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add set_ptes(), update_mmu_cache_range(), flush_icache_pages() and
flush_dcache_folio().  Change the PG_arch_1 (aka PG_dcache_dirty) flag
from being per-page to per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-19-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Rename _PFN_SHIFT to PFN_PTE_SHIFT.  Convert a few places
to call set_pte() instead of set_pte_at().  Add set_ptes(),
update_mmu_cache_range(), flush_icache_pages() and flush_dcache_folio().
Change the PG_arch_1 (aka PG_dcache_dirty) flag from being per-page
to per-folio.

Link: https://lkml.kernel.org/r/20230802151406.3735276-18-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Rename PFN_SHIFT_OFFSET to PTE_PFN_SHIFT.  Change the calling convention
for set_pte() to be the same as other architectures.  Add
update_mmu_cache_range(), flush_icache_pages() and flush_dcache_folio().

[arnd@arndb.de: mark flush_dcache_folio() inline]
  Link: https://lkml.kernel.org/r/20230810141947.1236730-9-arnd@kernel.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-17-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range(), flush_icache_pages() and
flush_dcache_folio().

Link: https://lkml.kernel.org/r/20230802151406.3735276-16-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add update_mmu_cache_range() and change _PFN_SHIFT to PFN_PTE_SHIFT.  It
would probably be more efficient to implement __update_tlb() by flushing
the entire folio instead of calling __update_tlb() N times, but I'll leave
that for someone who understands the architecture better.

Link: https://lkml.kernel.org/r/20230802151406.3735276-15-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add PFN_PTE_SHIFT, update_mmu_cache_range() and flush_dcache_folio(). 
Change the PG_arch_1 (aka PG_dcache_clean) flag from being per-page to
per-folio, which makes arch_dma_mark_clean() and mark_clean() a little
more exciting.

[willy@infradead.org: fix folio_size() handling]
  Link: https://lkml.kernel.org/r/ZNPlOCe8F+nrzPxr@casper.infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-14-willy@infradead.orgSigned-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>