A new harmless warning has come up on ARM builds with gcc-4.9:

drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_send.isra.11':
include/linux/spinlock.h:372:95: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]
  raw_spin_unlock_irqrestore(&lock->rlock, flags);
                                                                                               ^
drivers/char/ipmi/ipmi_msghandler.c:1490:16: note: 'flags' was declared here
  unsigned long flags;
                ^

This could be worked around by initializing the 'flags' variable, but it
seems better to rework the code to avoid this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7ea0ed2b ("ipmi: Make the message handler easier to use for SMI interfaces")
Signed-off-by: Corey Minyard <cminyard@mvista.com>

As part of the internal y2038 cleanup, this patch removes
timespec usage in the ipmi driver, replacing it timespec64

Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Corey Minyard <minyard@mvista.com>

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out
timestamped debug messages. Unfortunately it adds the ifdefs all over the
usage sites.

This patch cleans it up by adding a debug_timestamp() function which
is compiled out if DEBUG_TIMING isn't present. This cleans up all
the ugly ifdefs in the function logic.

Cc: openipmi-developer@lists.sourceforge.net
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Corey Minyard <minyard@mvista.com>

Removes a no longer needed FIXME comment in the function,acpi_gpe_irq_setup
for the file,ipmi_si_intf.c. This comment is no longer needed as clearly we
are passing the correct level of  ACPI_GPE_LEVEL_TRIGGERED to the installer
function,acpi_install_gpe_handler due to no breakage after years of using
this ACPI level in the function,acpi_install_gpe_handler.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

There can't be more than a few IPMI messages allocated at any one time,
so converting the messages to slabs would be a waste.  So just remove
the FIXME.
Suggested-by: Nicholas Krause <xerofoify@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

Since _PAGE_PROTNONE aliases _PAGE_GLOBAL it is only valid if
_PAGE_PRESENT is clear.  Make pte_protnone() and pmd_protnone() check
for this.

This fixes a 64-bit Xen PV guest regression introduced by 8a0516ed
("mm: convert p[te|md]_numa users to p[te|md]_protnone_numa").  Any
userspace process would endlessly fault.

In a 64-bit PV guest, userspace page table entries have _PAGE_GLOBAL set
by the hypervisor.  This meant that any fault on a present userspace
entry (e.g., a write to a read-only mapping) would be misinterpreted as
a NUMA hinting fault and the fault would not be correctly handled,
resulting in the access endlessly faulting.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs updates from Chris Mason:
 "This pull is mostly cleanups and fixes:

   - The raid5/6 cleanups from Zhao Lei fixup some long standing warts
     in the code and add improvements on top of the scrubbing support
     from 3.19.

   - Josef has round one of our ENOSPC fixes coming from large btrfs
     clusters here at FB.

   - Dave Sterba continues a long series of cleanups (thanks Dave), and
     Filipe continues hammering on corner cases in fsync and others

  This all was held up a little trying to track down a use-after-free in
  btrfs raid5/6.  It's not clear yet if this is just made easier to
  trigger with this pull or if its a new bug from the raid5/6 cleanups.
  Dave Sterba is the only one to trigger it so far, but he has a
  consistent way to reproduce, so we'll get it nailed shortly"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (68 commits)
  Btrfs: don't remove extents and xattrs when logging new names
  Btrfs: fix fsync data loss after adding hard link to inode
  Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group
  Btrfs: account for large extents with enospc
  Btrfs: don't set and clear delalloc for O_DIRECT writes
  Btrfs: only adjust outstanding_extents when we do a short write
  btrfs: Fix out-of-space bug
  Btrfs: scrub, fix sleep in atomic context
  Btrfs: fix scheduler warning when syncing log
  Btrfs: Remove unnecessary placeholder in btrfs_err_code
  btrfs: cleanup init for list in free-space-cache
  btrfs: delete chunk allocation attemp when setting block group ro
  btrfs: clear bio reference after submit_one_bio()
  Btrfs: fix scrub race leading to use-after-free
  Btrfs: add missing cleanup on sysfs init failure
  Btrfs: fix race between transaction commit and empty block group removal
  btrfs: add more checks to btrfs_read_sys_array
  btrfs: cleanup, rename a few variables in btrfs_read_sys_array
  btrfs: add checks for sys_chunk_array sizes
  btrfs: more superblock checks, lower bounds on devices and sectorsize/nodesize
  ...

Pull Ceph changes from Sage Weil:
 "On the RBD side, there is a conversion to blk-mq from Christoph,
  several long-standing bug fixes from Ilya, and some cleanup from
  Rickard Strandqvist.

  On the CephFS side there is a long list of fixes from Zheng, including
  improved session handling, a few IO path fixes, some dcache management
  correctness fixes, and several blocking while !TASK_RUNNING fixes.

  The core code gets a few cleanups and Chaitanya has added support for
  TCP_NODELAY (which has been used on the server side for ages but we
  somehow missed on the kernel client).

  There is also an update to MAINTAINERS to fix up some email addresses
  and reflect that Ilya and Zheng are doing most of the maintenance for
  RBD and CephFS these days.  Do not be surprised to see a pull request
  come from one of them in the future if I am unavailable for some
  reason"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits)
  MAINTAINERS: update Ceph and RBD maintainers
  libceph: kfree() in put_osd() shouldn't depend on authorizer
  libceph: fix double __remove_osd() problem
  rbd: convert to blk-mq
  ceph: return error for traceless reply race
  ceph: fix dentry leaks
  ceph: re-send requests when MDS enters reconnecting stage
  ceph: show nocephx_require_signatures and notcp_nodelay options
  libceph: tcp_nodelay support
  rbd: do not treat standalone as flatten
  ceph: fix atomic_open snapdir
  ceph: properly mark empty directory as complete
  client: include kernel version in client metadata
  ceph: provide seperate {inode,file}_operations for snapdir
  ceph: fix request time stamp encoding
  ceph: fix reading inline data when i_size > PAGE_SIZE
  ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_close_sessions)
  ceph: avoid block operation when !TASK_RUNNING (ceph_get_caps)
  ceph: avoid block operation when !TASK_RUNNING (ceph_mdsc_sync)
  rbd: fix error paths in rbd_dev_refresh()
  ...

Pull thermal managament updates from Zhang Rui:
 "Specifics:

   - Abstract the code and introduce helper functions for all int340x
     thermal drivers.  From: Srinivas Pandruvada.

   - Reorganize the ACPI LPAT table support code so that it can be
     shared for both ACPI PMIC driver and int340x thermal driver.

   - Add support for Braswell in intel_soc_dts thermal driver.

   - a couple of small fixes/cleanups for step_wise governor and int340x
     thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  Thermal/int340x_thermal: remove unused uuids.
  thermal: step_wise: spelling fixes
  thermal: int340x: fix sparse warning
  Thermal/int340x: LPAT conversion for temperature
  ACPI / PMIC: Use common LPAT table handling functions
  ACPI / LPAT: Common table processing functions
  thermal: Intel SoC DTS: Add Braswell support
  Thermal/int340x/int3402: Provide notification support
  Thermal/int340x/processor_thermal: Add thermal zone support
  Thermal/int340x/int3403: Use int340x thermal API
  Thermal/int340x/int3402: Use int340x thermal API
  Thermal/int340x: Add common thermal zone handler

Pull two EDAC fixes from Borislav Petkov:

 - A fix to sb_edac for proper detection on SNB machines

 - A fix to amd64_edac to not explode on Numascale machines with more
   than 16 memory controllers, from Daniel J Blueman.

* tag 'edac_fixes_for_3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, amd64_edac: Prevent OOPS with >16 memory controllers
  sb_edac: Fix detection on SNB machines

Merge tag 'platform-drivers-x86-v3.20-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull platform driver update from Darren Hart:
 "This includes a significant update to the toshiba_acpi driver,
  bringing it to feature parity with the Windows driver, followed by
  some needed cleanups.

  The other changes are mostly minor updates, quirks, sparse fixes, or
  cleanups.

  Details:

   - toshiba_acpi:
       Add support for missing features from the Windows driver, bump the
       sysfs version, and clean up the driver.

   - thinkpad_acpi:
       BIOS string versions, unhandled hkey events.

   - msamsung-laptop:
       Add native backlight quirk, enable better lid handling.

   - intel_scu_ipc:
       Read resources from PCI configuration

   - other:
       Fix sparse warnings, general cleanups"

* tag 'platform-drivers-x86-v3.20-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (34 commits)
  toshiba_acpi: Cleanup GPL header
  toshiba_acpi: Cleanup comment blocks and capitalization
  toshiba_acpi: Make use of DEVICE_ATTR_{RO, RW} macros
  toshiba_acpi: Drop the toshiba_ prefix from sysfs function names
  toshiba_acpi: Move sysfs function and struct declarations further down
  Documentation/ABI: Add file describing the sysfs entries for toshiba_acpi
  toshiba_acpi: Clean file according to coding style
  toshiba_acpi: Bump version number to 0.21
  toshiba_acpi: Add support to enable/disable USB 3
  toshiba_acpi: Add support for Panel Power ON
  toshiba_acpi: Add support for Keyboard functions mode
  toshiba_acpi: Add fan entry to sysfs
  toshiba_acpi: Add version entry to sysfs
  thinkpad_acpi: support new BIOS version string pattern
  thinkpad_acpi: unhandled hkey event
  toshiba_acpi: Make toshiba_eco_mode_available more robust
  classmate-laptop: Fix sparse warning (0 as NULL)
  Sony-laptop: Fix sparse warning (make undeclared var static)
  thinkpad_acpi.c: Fix sparse warning (make undeclared var static)
  samsung-laptop.c: Prefer kstrtoint over single variable sscanf
  ...

Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes

Pull misc kbuild changes from Michal Marek:
 "Just a few non-critical kbuild changes:

   - builddeb adds the actual distribution name in the changelog
   - documentation fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: trivial - fix the help doc of CONFIG_CC_OPTIMIZE_FOR_SIZE
  kbuild: Update documentation of clean-files and clean-dirs
  builddeb: Try to determine distribution
  builddeb: Update year and git repository URL in debian/copyright

- add Ilya, drop Yehuda as an RBD maintainer
- add Zheng as a Ceph maintainer
- update Yehuda and Sage's emails
Signed-off-by: Sage Weil <sage@redhat.com>

Pull kbuild updates from Michal Marek:

 - several cleanups in kbuild

 - serialize multiple *config targets so that 'make defconfig kvmconfig'
   works

 - The cc-ifversion macro got support for an else-branch

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild,gcov: simplify kernel/gcov/Makefile more
  kbuild: allow cc-ifversion to have the argument for false condition
  kbuild,gcov: simplify kernel/gcov/Makefile
  kbuild,gcov: remove unnecessary workaround
  kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion
  kbuild: fix cc-ifversion macro
  kbuild: drop $(version_h) from MRPROPER_FILES
  kbuild: use mixed-targets when two or more config targets are given
  kbuild: remove redundant line from bounds.h/asm-offsets.h
  kbuild: merge bounds.h and asm-offsets.h rules
  kbuild: Drop support for clean-rule

a255651d ("ceph: ensure auth ops are defined before use") made
kfree() in put_osd() conditional on the authorizer.  A mechanical
mistake most likely - fix it.

Cc: Alex Elder <elder@linaro.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>

It turns out it's possible to get __remove_osd() called twice on the
same OSD.  That doesn't sit well with rb_erase() - depending on the
shape of the tree we can get a NULL dereference, a soft lockup or
a random crash at some point in the future as we end up touching freed
memory.  One scenario that I was able to reproduce is as follows:

            <osd3 is idle, on the osd lru list>
<con reset - osd3>
con_fault_finish()
  osd_reset()
                              <osdmap - osd3 down>
                              ceph_osdc_handle_map()
                                <takes map_sem>
                                kick_requests()
                                  <takes request_mutex>
                                  reset_changed_osds()
                                    __reset_osd()
                                      __remove_osd()
                                  <releases request_mutex>
                                <releases map_sem>
    <takes map_sem>
    <takes request_mutex>
    __kick_osd_requests()
      __reset_osd()
        __remove_osd() <-- !!!

A case can be made that osd refcounting is imperfect and reworking it
would be a proper resolution, but for now Sage and I decided to fix
this by adding a safe guard around __remove_osd().

Fixes: http://tracker.ceph.com/issues/8087

Cc: Sage Weil <sage@redhat.com>
Cc: stable@vger.kernel.org # 3.9+: 7c6e6fc5: libceph: assert both regular and lingering lists in __remove_osd()
Cc: stable@vger.kernel.org # 3.9+: cc9f1f51: libceph: change from BUG to WARN for __remove_osd() asserts
Cc: stable@vger.kernel.org # 3.9+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>

This converts the rbd driver to use the blk-mq infrastructure.  Except
for switching to a per-request work item this is almost mechanical.

This was tested by Alexandre DERUMIER in November, and found to give
him 120000 iops, although the only comparism available was an old
3.10 kernel which gave 80000iops.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <elder@linaro.org>
[idryomov@gmail.com: context, blk_mq_init_queue() EH]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

When we receives traceless reply for request that created new inode,
we re-send a lookup request to MDS get information of the newly created
inode. (VFS expects FS' callback return an inode in create case)
This breaks one request into two requests. Other client may modify or
move to the new inode in the middle.

When the race happens, ceph_handle_notrace_create() unconditionally
links the dentry for 'create' operation to the inode returned by lookup.
This may confuse VFS when the inode is a directory (VFS does not allow
multiple linkages for directory inode).

This patch makes ceph_handle_notrace_create() when it detect a race.
This event should be rare and it happens only when we talk to old MDS.
Recent MDS does not send traceless reply for request that creates new
inode.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>

So that MDS can check if any request is already completed and process
completed requests in clientreplay stage. When completed requests are
processed in clientreplay stage, MDS can avoid sending traceless
replies.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

TCP_NODELAY socket option set on connection sockets,
disables Nagle’s algorithm and improves latency characteristics.
tcp_nodelay(default)/notcp_nodelay option flags provided to
enable/disable setting the socket option.
Signed-off-by: Chaitanya Huilgol <chaitanya.huilgol@sandisk.com>
[idryomov@redhat.com: NO_TCP_NODELAY -> TCP_NODELAY, minor adjustments]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

If the clone is resized down to 0, it becomes standalone.  If such
resize is carried over while an image is mapped we would detect this
and call rbd_dev_parent_put() which means "let go of all parent state,
including the spec(s) of parent images(s)".  This leads to a mismatch
between "rbd info" and sysfs parent fields, so a fix is in order.

    # rbd create --image-format 2 --size 1 foo
    # rbd snap create foo@snap
    # rbd snap protect foo@snap
    # rbd clone foo@snap bar
    # DEV=$(rbd map bar)
    # rbd resize --allow-shrink --size 0 bar
    # rbd resize --size 1 bar
    # rbd info bar | grep parent
            parent: rbd/foo@snap

Before:

    # cat /sys/bus/rbd/devices/0/parent
    (no parent image)

After:

    # cat /sys/bus/rbd/devices/0/parent
    pool_id 0
    pool_name rbd
    image_id 10056b8b4567
    image_name foo
    snap_id 2
    snap_name snap
    overlap 0
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
Reviewed-by: Josh Durgin <jdurgin@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>

ceph_handle_snapdir() checks ceph_mdsc_do_request()'s return value
and creates snapdir inode if it's -ENOENT
Signed-off-by: Yan, Zheng <zyan@redhat.com>

ceph_add_cap() calls __check_cap_issue(), which clears directory
inode' complete flag. so we should set the complete flag for empty
directory should be set after calling ceph_add_cap().
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Signed-off-by: Yan, Zheng <zyan@redhat.com>

remove all unsupported operations from {inode,file}_operations.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

struct timespec uses 'long' to present second and nanosecond. 'long'
is 64 bits on 64bits machine. ceph MDS expects time stamp to be
encoded as struct ceph_timespec, which uses 'u32' to present second
and nanosecond.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

when inode has inline data but its size > PAGE_SIZE (it was truncated
to larger size), previous direct read code return -EIO. This patch adds
code to return zeros for data whose offset > PAGE_SIZE.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

use an atomic variable to track number of sessions, this can avoid block
operation inside wait loops.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

we should not do block operation in wait_event_interruptible()'s condition
check function, but reading inline data can block. so move the read inline
data code to ceph_get_caps()
Signed-off-by: Yan, Zheng <zyan@redhat.com>

check_cap_flush() calls mutex_lock(), which may block. So we can't
use it as condition check function for wait_event();
Signed-off-by: Yan, Zheng <zyan@redhat.com>

header_rwsem should be released on errors.  Also remove useless
rbd_dev->mapping.size != rbd_dev->header.image_size test.
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

When snaprealm is created, its initial reference count is zero.
But in some rare cases, the newly created snaprealm is not referenced
by anyone. This causes snaprealm with zero reference count not freed.

The fix is set reference count of newly snaprealm to 1. The reference
is return the function who requests to create the snaprealm. When the
function finishes its job, it releases the reference.
Signed-off-by: Yan, Zheng <zyan@redhat.com>

A bug is found in striped_read() of fs/ceph/file.c. striped_read() calls
ceph_zero_pape_vector_range().  The first argument, page_align + read + ret,
passed to ceph_zero_pape_vector_range() is wrong.

When a file has holes, this wrong parameter may cause memory corruption
either in kernal space or user space. Kernel space memory may be corrupted in
the case of non direct IO; user space memory may be corrupted in the case of
direct IO. In the latter case, the application doing direct IO may crash due
to memory corruption, as we have experienced.

The correct value should be initial_align + read + ret, where intial_align =
o_direct ? buf_align : io_align.  Compared with page_align, the current page
offest, initial_align is the initial page offest, which should be used to
calculate the page and offset in ceph_zero_pape_vector_range().
Reported-by: caifeng zhu <zhucaifeng@unissoft-nj.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>

Remove the function ceph_get_cached_acl() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Yan, Zheng <zyan@redhat.com>

It's been largely superseded by dup_token() and unused for over
2 years, identified by cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
[idryomov@redhat.com: changelog]
Signed-off-by: Ilya Dryomov <idryomov@redhat.com>

mark session as readonly and wake up all cap waiters.
Signed-off-by: Yan, Zheng <zyan@redhat.com>