- 15 Sep, 2015 7 commits
-
-
Jiri Olsa authored
Enhancing parsing events tracepoint error output. Adding more verbose output when the tracepoint is not found or the tracing event path cannot be access. $ sudo perf record -e sched:sched_krava ls event syntax error: 'sched:sched_krava' \___ unknown tracepoint Error: File /sys/kernel/debug/tracing//tracing/events/sched/sched_krava not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events ... $ perf record -e sched:sched_krava ls event syntax error: 'sched:sched_krava' \___ can't access trace events Error: No permissions to read /sys/kernel/debug/tracing//tracing/events/sched/sched_krava Hint: Try 'sudo mount -o remount,mode=755 /sys/kernel/debug' Run 'perf list' for a list of valid events ... Signed-off-by:Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Raphael Beamonte <raphael.beamonte@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441615087-13886-6-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
Propagate error info from tp_format via ERR_PTR to get it all the way down to the parse-event.c tracepoint adding routines. Following functions now return pointer with encoded error: - tp_format - trace_event__tp_format - perf_evsel__newtp_idx - perf_evsel__newtp This affects several other places in perf, that cannot use pointer check anymore, but must utilize the err.h interface, when getting error information from above functions list. Signed-off-by:
-
Jiri Olsa authored
Pass 'struct parse_events_error *error' to the parse-event.c tracepoint adding path. It will be filled with error data in following patches. Signed-off-by:
Raphael Beamonte <raphael.beamonte@gmail.com> Reviewed-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1441615087-13886-4-git-send-email-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
Adding part of the kernel's <linux/err.h> interface: inline void * __must_check ERR_PTR(long error); inline long __must_check PTR_ERR(__force const void *ptr); inline bool __must_check IS_ERR(__force const void *ptr); It will be used to propagate error through pointers in following patches. Signed-off-by:
-
Namhyung Kim authored
The init/exit_symbols_maps() functions are to setup and cleanup necessary info for probe events. But they need to be called from out of the probe code now, so this patch exports them. However the names are too generic, so change them to have 'probe'. :) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441852026-28974-2-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Namhyung Kim authored
The cleanup_perf_probe_events() frees all resources related to a perf probe event. However it only freed resources in trace probe events, not perf probe events. So call clear_perf_probe_event() too. Reported-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Add 'socket' sort entry, to sort by the processor socket in 'perf top' and 'perf report'. (Kan Liang) - Introduce --socket-filter to 'perf report', for filtering by processor socket. (Kan Liang) - Add new "Zoom into Processor Socket" operation in the perf hists browser, used in 'perf top' and 'perf report'. (Kan Liang) - Fix the 'CPU' hist browser column width calculation. (Arnaldo Carvalho de Melo) Infrastructure changes: - 'perf test' fixes for the object code reading entry. (Jan Stancek) - Add processor socket and cpu topology 'perf test' entries. (Kan Liang) - Introduce more sysfs__read_TYPE() helpers. (Arnaldo Carvalho de Melo) - Group cpu information reading functions in tools/lib/api/cpu.[ch], starting with cpu__get_max_freq() from a patchkit by Kan Liang. (Arnaldo Carvalho de Melo) - Retrieve the MSR PMU type from a perf.data file header and store it in struct perf_env. (Kan Liang) - Add tools/include into CTAGS file list. (Jiri Olsa) - Add iterator function for perf tests. (Matt Fleming) - Switch to tracing_patch interface. (Jiri Olsa) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 14 Sep, 2015 27 commits
-
-
Kan Liang authored
Add test case for hists socket filter. Signed-off-by:
Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1441377946-44429-5-git-send-email-kan.liang@intel.comSigned-off-by:
-
Kan Liang authored
Currently, users can zoom in/out for threads and dso in 'perf top' and 'perf report'. This patch extends it for the processor sockets. 'S' is the short key to zoom into current Processor Socket. Signed-off-by:
-
Kan Liang authored
Introduce --socket-filter option for 'perf report' to only show entries for a processor socket that match this filter. $ perf report --socket-filter 1 --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 752 of event 'cycles' # Event count (approx.): 350995599 # Processor Socket: 1 # # Overhead Command Shared Object Symbol # ........ ......... ................ ................................. # 97.02% test test [.] plusB_c 0.97% test test [.] plusA_c 0.23% swapper [kernel.vmlinux] [k] acpi_idle_do_entry 0.09% rcu_sched [kernel.vmlinux] [k] dyntick_save_progress_counter 0.01% swapper [kernel.vmlinux] [k] task_waking_fair 0.00% swapper [kernel.vmlinux] [k] run_timer_softirq Signed-off-by: -
Kan Liang authored
This patch enable perf report to sort by processor socket: $ perf report --stdio --sort socket,comm,dso,symbol # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 686 of event 'cycles' # Event count (approx.): 349215462 # # Overhead SOCKET Command Shared Object Symbol # ........ ...... ....... ................ ............................ # 97.05% 000 test test [.] plusB_c 0.98% 000 test test [.] plusA_c 0.93% 001 perf [kernel.vmlinux] [k] smp_call_function_single 0.19% 001 perf [kernel.vmlinux] [k] page_fault 0.19% 001 swapper [kernel.vmlinux] [k] pm_qos_request 0.16% 000 test [kernel.vmlinux] [k] add_mm_counter_fast Signed-off-by: -
Kan Liang authored
This information will come from perf.data files of from the current system, cached when needed, such as when the 'socket' sort order gets introduced. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
The 'struct machine' represents the machine where the samples were/are being collected, and we also have a 'struct perf_env' with extra details about such machine, that we were collecting at 'perf.data' creation time but we also needed when no perf.data file is being used, such as in 'perf top'. So, get those structs closer together, as they provide a bigger picture of the sample's environment. In 'perf session', when the file argument is NULL, we can assume that the tool is sampling the running machine, so point machine->env to the global put in place in previous patches, while set it to the perf_header.env one when reading from a file. This paves the way for machine->env to be used in perf_event__preprocess_sample to populate addr_location.socket. Tested-by:
-
Arnaldo Carvalho de Melo authored
Out of the code to write the cpu topology map in the perf.data file header. Now if one needs the CPU topology map for the running machine, one needs to call perf_env__read_cpu_topology_map(perf_env) and the info will be stored in perf_env.cpu. For now we're using a global perf_env variable, that will have its contents freed after we run a builtin. v2: Check perf_env__read_cpu_topology_map() return in write_cpu_topology() (Kan Liang) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1441828225-667-5-git-send-email-acme@kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
We have the tools/lib/ sysfs__read_int() for that, avoid code duplication. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-fqg6vt5ku72pbf54ljg6tmoy@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
E.g.: $ ./cpu__get_max_freq 3200000 It does that, as Kan's patch does, by looking at these files: $ cat /sys/devices/system/cpu/online 0-3 $ ./sysfs__read_ull devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000 $ I.e. find out the first online CPU, then read its cpufreq info. But do it in tools/lib/api/, so that other tools/ living code can use it, not just perf. Based-on-a-patch-by:
-
Arnaldo Carvalho de Melo authored
To read either an int or an unsigned long long value from the given file. E.g.: $ cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 3200000 $ ./sysfs__read_ull devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq=3200000 $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-4a12m4d5k8m4qgc1vguocvei@git.kernel.orgSigned-off-by:
-
Kan Liang authored
Get msr pmu type when processing pmu_mappings Signed-off-by:
-
Jiri Olsa authored
Adding tools/include into tags directories, to have include definitions reachable via tags/cscope. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We have no use for it in evsel.h. Tested-by:
-
Arnaldo Carvalho de Melo authored
Since we were not setting it to at least 3 chars ('CPU'), it was being reset to zero when recalculating the columns width when refreshing the screen, in 'perf top'. Fix it. Tested-by: -
Arnaldo Carvalho de Melo authored
Move this from two globals to perf_env global, that eventually will be just perf_header->env or something else, to ease the refactoring series, leave it as a global and go on reading more of its fields, not as part of the header writing process but as a perf_env init one that will be used for perf.data-less situations. Tested-by:
-
Arnaldo Carvalho de Melo authored
In ce80d3be ("perf tools: Rename perf_session_env to perf_env") we forgot to rename a few functions to the "perf_env" prefix, do it now. Tested-by:
-
Arnaldo Carvalho de Melo authored
Since it can be used separately from 'perf_session' and 'perf_header', move it to separate include file and object, next csets will try to move a perf_env__init() routine. Tested-by:
-
Matt Fleming authored
In preparation for introducing more arrays of tests, e.g. "arch tests" (architecture-specific tests), abstract the code to iterate over the list of tests into a helper function. This way, code that uses a 'struct test' doesn't need to worry about how the tests are grouped together and changes to the list of tests doesn't require changes to the code using it. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Acked-by:
-
Kan Liang authored
This patch test cpu core_id and socket_id which are stored in perf_env. Commiter note: # perf test topo 40: Test topology in session: Ok # perf test -v topo 40: Test topology in session: --- start --- test child forked, pid 31767 templ file: /tmp/perf-test-VTZ1PL CPU 0, core 0, socket 0 CPU 1, core 1, socket 0 CPU 2, core 0, socket 0 CPU 3, core 1, socket 0 test child finished with 0 ---- end ---- Test topology in session: Ok # Based-on-a-patch-by:
-
Jiri Olsa authored
Using tracing_path interface on several places, that more or less copy the functionality of tracing_path interface. Signed-off-by:
-
Jiri Olsa authored
We have all the functionality in fs.c, let's remove unneeded objects. Signed-off-by:
-
Jiri Olsa authored
Switching to the fs.c related filesystem framework. Signed-off-by:
-
Jiri Olsa authored
Making tracing_path__strerror_open_tp message generic by mentioning both debugfs/tracefs words in error message plus the tracing_path instead of debugfs_mountpoint. Signed-off-by:
-
Jan Stancek authored
Signed-off-by:
Jan Stancek <jstancek@redhat.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/d0f42f786bc0e965918e0f422df25617a12a4021.1441181335.git.jstancek@redhat.comSigned-off-by:
-
Jan Stancek authored
objdump output can span across multiple sections: Disassembly of section .text: 0000000000000008 <crc32c+0x8>: 8: 48 89 e5 mov %rsp,%rbp b: 53 push %rbx c: 8b 01 mov (%rcx),%eax <snip> 6b: 90 nop Disassembly of section .init.text: 0000000000000008 <init_module+0x8>: 8: 00 00 add %al,(%rax) a: 00 00 add %al,(%rax) c: 48 89 e5 Stop further reading if an address starts going backwards, assuming we crossed sections. Signed-off-by: -
Jan Stancek authored
Add -z parameter to avoid skipping zero blocks: ffffffff816704fe <sysret_check+0x4b>: ffffffff816704fe: 7b 34 jnp ffffffff81670534 <sysret_signal+0x1c> ... ffffffff81670501 <sysret_careful>: ffffffff81670501: 0f ba e2 03 bt $0x3,%edx ffffffff81670505: 73 11 jae ffffffff81670518 <sysret_signal> Signed-off-by: -
Jan Stancek authored
objdump output can contain repeated bytes. At the moment test reads all output sequentially, assuming each address is represented in output only once: ffffffff8164efb3 <retint_swapgs+0x9>: ffffffff8164efb3: c1 5d 00 eb rcrl $0xeb,0x0(%rbp) ffffffff8164efb7: 00 4c 8b 5c add %cl,0x5c(%rbx,%rcx,4) ffffffff8164efb8 <restore_c_regs_and_iret>: ffffffff8164efb8: 4c 8b 5c 24 30 mov 0x30(%rsp),%r11 ffffffff8164efbd: 4c 8b 54 24 38 mov 0x38(%rsp),%r10 Store objdump output to buffer according to offset calculated from address on each line. Signed-off-by:
-
- 13 Sep, 2015 6 commits
-
-
Sukadev Bhattiprolu authored
We currently use PERF_EVENT_TXN flag to determine if we are in the middle of a transaction. If in a transaction, we defer the schedulability checks from pmu->add() operation to the pmu->commit() operation. Now that we have "transaction types" (PERF_PMU_TXN_ADD, PERF_PMU_TXN_READ) we can use the type to determine if we are in a transaction and drop the PERF_EVENT_TXN flag. When PERF_EVENT_TXN is dropped, the cpuhw->group_flag on some architectures becomes unused, so drop that field as well. This is an extension of the Powerpc patch from Peter Zijlstra to s390, Sparc and x86 architectures. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1441336073-22750-11-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by:
-
Sukadev Bhattiprolu authored
The 24x7 counters in Powerpc allow monitoring a large number of counters simultaneously. They also allow reading several counters in a single HCALL so we can get a more consistent snapshot of the system. Use the PMU's transaction interface to monitor and read several event counters at once. The idea is that users can group several 24x7 events into a single group of events. We use the following logic to submit the group of events to the PMU and read the values: pmu->start_txn() // Initialize before first event for each event in group pmu->read(event); // Queue each event to be read pmu->commit_txn() // Read/update all queuedcounters The ->commit_txn() also updates the event counts in the respective perf_event objects. The perf subsystem can then directly get the event counts from the perf_event and can avoid submitting a new ->read() request to the PMU. Thanks to input from Peter Zijlstra. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1441336073-22750-10-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by:
-
Sukadev Bhattiprolu authored
Define a new PERF_PMU_TXN_READ interface to read a group of counters at once. pmu->start_txn() // Initialize before first event for each event in group pmu->read(event); // Queue each event to be read rc = pmu->commit_txn() // Read/update all queued counters Note that we use this interface with all PMUs. PMUs that implement this interface use the ->read() operation to _queue_ the counters to be read and use ->commit_txn() to actually read all the queued counters at once. PMUs that don't implement PERF_PMU_TXN_READ ignore ->start_txn() and ->commit_txn() and continue to read counters one at a time. Thanks to input from Peter Zijlstra. Signed-off-by: -
Sukadev Bhattiprolu authored
When we implement the ability to read several counters at once (using the PERF_PMU_TXN_READ transaction interface), perf_event_read() can fail when the 'group' parameter is true (eg: trying to read too many events at once). For now, have perf_event_read() return an integer. Ignore the return value when the 'group' parameter is false. Signed-off-by:
-
Peter Zijlstra authored
In order to enable the use of perf_event_read(.group = true), we need to invert the sibling-child loop nesting of perf_read_group(). Currently we iterate the child list for each sibling, this precludes using group reads. Flip things around so we iterate each group for each child. Signed-off-by:
-
Peter Zijlstra authored
Enable perf_event_read() to update entire groups at once, this will be useful for read transactions. Signed-off-by:
-
