- 27 Jun, 2012 6 commits
-
-
Jan Schmidt authored
When a MOD_LOG_KEY_ADD operation is rewinded, we remove the key from the tree block. If its not the last key, removal involves a move operation. This move operation was explicitly done before this commit. However, at insertion time, there's a move operation before the actual addition to make room for the new key, which is recorded in the tree mod log as well. This means, we must drop the move operation when rewinding the add operation, because the next operation we'll be rewinding will be the corresponding MOD_LOG_MOVE_KEYS operation. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
When delayed refs exist, btrfs_find_all_roots used to hold the delayed ref mutex way longer than actually required. We ought to drop it immediately after we're done collecting all the delayed refs. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
Several callers of insert_ptr set the tree_mod_log parameter to 0 to avoid addition to the tree mod log. In fact, we need all of those operations. This commit simply removes the additional parameter and makes addition to the tree mod log unconditional. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
For the tree mod log, we don't log any operations at leaf level. If the root is at the leaf level (i.e. the tree consists only of the root), then __tree_mod_log_oldest_root will find a ROOT_REPLACE operation in the log (because we always log that one no matter which level), but no other operations. With this patch __tree_mod_log_oldest_root exits cleanly instead of BUGging in this situation. get_old_root checks if its really a root at leaf level in case we don't have any operations and WARNs if this assumption breaks. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
With the tree mod log, we can have a tree that's two levels high, but btrfs_search_old_slot may still return a path with the tree root at level one instead. __resolve_indirect_ref must care for this and accept parents in a lower level than expected. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
We track two conditions to decide if we should sleep while waiting for more delayed refs, the number of delayed refs (num_refs) and the first entry in the list of blockers (first_seq). When we suspect staleness, we save num_refs and do one more cycle. If nothing changes, we then save first_seq for later comparison and do wait_event. We ought to save first_seq the very same moment we're saving num_refs. Otherwise we cannot be sure that nothing has changed and we might start waiting when we shouldn't, which could lead to starvation. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
- 21 Jun, 2012 4 commits
-
-
Josef Bacik authored
There is some concern that these iput()'s could be the final iputs and could induce lockups on people waiting on writeback. This would happen in the rare case that we don't create ordered extents because of an error, but it is theoretically possible and we already have a mechanism to deal with this so just make them delayed iputs to negate any worry. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Josef Bacik authored
When fixing up the locking in the delayed ref destruction work I accidently broke the locking myself ;(. Add back a spin_lock that should be there and we are now all set. Thanks, Btrfs: add a missing spin_lock When fixing up the locking in the delayed ref destruction work I accidently broke the locking myself ;(. Add back a spin_lock that should be there and we are now all set. Thanks, Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Alexander Block authored
add_all_parents did assume that path is already at a correct extent data item, which may not be true in case of data extents that were partly rewritten and splitted. We need to check if we're on a matching extent for every item and only for the ones after the first. The loop is changed to do this now. This patch also fixes a bug introduced with commit 3b127fd8 "Btrfs: remove obsolete btrfs_next_leaf call from __resolve_indirect_ref". The removal of next_leaf did sometimes result in slot==nritems when the above described case happens, and thus resulting in invalid values (e.g. wanted_obejctid) in add_all_parents (leading to missed backrefs or even crashes). Signed-off-by:
Alexander Block <ablock84@googlemail.com> Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Alexander Block authored
We introduce btrfs_next_old_item that uses btrfs_next_old_leaf instead of btrfs_next_leaf. btrfs_next_item is also changed to simply call btrfs_next_old_item with time_seq being 0. Signed-off-by:
Alexander Block <ablock84@googlemail.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
- 16 Jun, 2012 2 commits
-
-
Chris Mason authored
Avoid warning in 32 bit machines Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Chris Mason authored
gcc was giving an uninit variable warning here. Strictly speaking we don't need to init it, but this will make things much less error prone. Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
- 15 Jun, 2012 19 commits
-
-
Liu Bo authored
Update to the latest btrfs's maintainer mail and git repo. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Miao Xie authored
the items of the delayed inodes were forgotten to be freed, this patch fixes it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
Since we have two trees for recording pinned extents, we need to go through both of them to make sure that we've done everything clean. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
We've forgotten to clear extent states in pinned tree, which will results in space counter mismatch and memory leak: WARNING: at fs/btrfs/extent-tree.c:7537 btrfs_free_block_groups+0x1f3/0x2e0 [btrfs]() ... space_info 2 has 8380416 free, is not full space_info total=12582912, used=4096, pinned=4096, reserved=0, may_use=0, readonly=4194304 btrfs state leak: start 29364224 end 29376511 state 1 in tree ffff880075f20090 refs 1 ... Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
Seeding devices are not supposed to change any more. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Liu Bo authored
When we move a file into a directory with compression flag, we need to inherite BTRFS_INODE_COMPRESS and clear BTRFS_INODE_NOCOMPRESS as well. But if we move a file into a directory without compression flag, we need to clear both of them. It is the way how our setflags deals with compression flag, so keep the same behaviour here. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
-
Li Zefan authored
It's a bug, but it happens to work, as BTRFS_COMPRESS_LZO == 2, which has only one bit set. Signed-off-by:
Li Zefan <lizefan@huawei.com>
-
Li Zefan authored
If a file has 3 small extents: | ext1 | ext2 | ext3 | Running "btrfs fi defrag" will only defrag the last two extents, if those extent mappings hasn't been read into memory from disk. This bug was introduced by commit 17ce6ef8 ("Btrfs: add a check to decide if we should defrag the range") The cause is, that commit looked into previous and next extents using lookup_extent_mapping() only. While at it, remove the code that checks the previous extent, since it's sufficient to check the next extent. Signed-off-by:
Li Zefan <lizefan@huawei.com>
-
Josef Bacik authored
I removed this in an earlier commit and I was wrong. Because compression can return from filemap_fdatawrite() without having actually set any of it's pages as writeback() it can make filemap_fdatawait() do essentially nothing, and then we won't find any ordered extents because they may not have been created yet. So not only does this make fsync() completely useless, but it will also screw up if you truncate on a non-page aligned offset since we zero out the end and then wait on ordered extents and then call drop caches. We can drop the cache before the io completes and then we try to unpin the extent we just wrote we won't find it and everything goes sideways. So fix this by putting it back and put a giant comment there to keep me from trying to remove it in the future. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
A user reported lots of problems using compression on the new code and it turns out part of the problem was that igrab() was failing when we added a new ordered extent. This is because when writing out an inode under compression we immediately return without actually doing anything to the pages, and then in another thread at some point down the line actually do the ordered dance. The problem is between the point that we start writeback and we actually add the ordered extent we could be trying to reclaim the inode, which makes igrab() return NULL. So we need to do an igrab() when we create the async extent and then drop it when we are done with it. This makes sure we stay pinned in memory until the ordered extent can get a reference on it and we are good to go. With this patch we no longer panic in btrfs_finish_ordered_io(). Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Because btrfs can remove the device that was mounted we need to have a ->show_devname so that in this case we can print out some other device in the file system to /proc/mount. So if there are multiple devices in a btrfs file system we will just print the device with the lowest devid that we can find. This will make everything consistent and deal with device removal properly. The drawback is if you mount with a device that is higher than the lowest devicd it won't show up as the mounted device in /proc/mounts, but this is a small price to pay. This was inspired by Miao Xie's patch. Thanks, Reviewed-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
Al pointed out that we can just toss out the old name on a device and add a new one arbitrarily, so anybody who uses device->name in printk could possibly use free'd memory. Instead of adding locking around all of this he suggested doing it with RCU, so I've introduced a struct rcu_string that does just that and have gone through and protected all accesses to device->name that aren't under the uuid_mutex with rcu_read_lock(). This protects us and I will use it for dealing with removing the device that we used to mount the file system in a later patch. Thanks, Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
I was getting hung on umount when a transaction was aborted because a range of one of the free space inodes was still locked. This is because the nocow stuff doesn't unlock anything on error. This fixed the problem and I verified that is what was happening. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
So we're forcing the eb's to have their ref count set to 1 so invalidatepage works but this breaks lots of things, for example root nodes, and is just plain wrong, we don't need to just evict all of this stuff. Also drop the invalidatepage altogether and add a page_cache_release(). With this patch we no longer hang when trying to access the root nodes after an aborted transaction and we no longer leak memory. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
If a transaction commit fails we don't abort it so we don't set an error on the file system. This patch fixes that by actually calling the abort stuff and then adding a check for a fs error in the transaction start stuff to make sure it is caught properly. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
I was getting lots of hung tasks and a NULL pointer dereference because we are not cleaning up the transaction properly when it aborts. First we need to reset the running_transaction to NULL so we don't get a bad dereference for any start_transaction callers after this. Also we cannot rely on waitqueue_active() since it's just a list_empty(), so just call wake_up() directly since that will do the barrier for us and such. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
The transaction abort stuff was throwing warnings from the list debugging code because we do a list_del_init outside of the delayed_refs spin lock. The delayed refs locking makes baby Jesus cry so it's not hard to get wrong, but we need to take the ref head mutex to make sure it's not being processed currently, and so if it is we need to drop the spin lock and then take and drop the mutex and do the search again. If we can take the mutex then we can safely remove the head from the list and carry on. Now when the transaction aborts I don't get the list debugging warnings. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
While doing my enospc work I got a transaction abortion that resulted in a panic when we tried to unlock_page() an already unlocked page. This is because we aren't calling extent_clear_unlock_delalloc with the locked page so it was unlocking all the pages in the range. This is wrong since __extent_writepage expects to have the page locked still unless we return *page_started as 1. This should keep us from panicing. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
- 14 Jun, 2012 5 commits
-
-
Jan Schmidt authored
When adding to the tree modification log, we grab two locks at different stages. We must not drop the outer lock until we're done with section protected by the inner lock. This moves the unlock call for the outer lock to the appropriate position. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
To make sense of the tree mod log, the backref walker not only needs btrfs_search_old_slot, but it also called btrfs_next_leaf, which in turn was calling btrfs_search_slot. This obviously didn't give the correct result. This commit adds btrfs_next_old_leaf, a drop-in replacement for btrfs_next_leaf with a time_seq parameter. If it is zero, it behaves exactly like btrfs_next_leaf. If it is non-zero, it will use btrfs_search_old_slot with this time_seq parameter. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
In __tree_mod_log_oldest_root() we must return the found operation even if it's not a ROOT_REPLACE operation. Otherwise, the caller assumes that there are no operations to be rewinded and returns immediately. The code in the caller is modified to improve readability. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
get_old_root could race with root node updates because we weren't locking the node early enough. Use btrfs_read_lock_root_node to grab the root locked in the very beginning and release the lock as soon as possible (just like btrfs_search_slot does). Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
When resolving indirect refs, we used to call btrfs_next_leaf in case we didn't find an exact match. While we should find exact matches most of the time, in case we don't, we must continue searching. Treating those matches differently depending on the level we're searching doesn't make sense. Even worse, we might end up searching for a key larger than the largest, in which case there is no next_leaf and subsequent jobs would fail. This commit drops the bogous lines. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
- 04 Jun, 2012 1 commit
-
-
Jan Schmidt authored
This is a leftover from cleanup patch 559af821. Before the cleanup, btrfs_header_nritems was called inside an if condition. As it has no side effects we need to preserve here, it should simply be dropped. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
- 31 May, 2012 3 commits
-
-
git://git.jan-o-sch.net/btrfs-unstableChris Mason authored
Conflicts: fs/btrfs/ulist.h Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Jan Schmidt authored
When we rewind REMOVE_WHILE_FREEING operations, there's code that allocates a fresh buffer instead of cloning the old one. Setting that buffer's level correctly was missing in this case. When rewinding a MOVE_KEYS operation, btrfs_node_key_ptr_offset(slot) was missing for memmove_extent_buffer()'s arguments. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Jan Schmidt authored
Logging for del_ptr when we're not deleting the last pointer was wrong. This fixes both, duplicate log entries and log sequence. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-