Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add suppport common clock framework for exynos

* tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits)
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: exynos5250: register display block gate clocks to common clock framework
  clk: exynos4: Add support for SoC-specific register save list
  clk: exynos4: Add missing registers to suspend save list
  clk: exynos4: Remove E4X12 prefix from SRC_DMC register
  clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register
  clk: exynos4: Add E4210 prefix to LCD1 clock registers
  clk: exynos4: Remove SoC-specific registers from save list
  clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions
  clk: exynos4: Define {E,V}PLL registers
  clk: exynos4: Add missing mout_sata on Exynos4210
  clk: exynos4: Add missing CMU_TOP and ISP clocks
  clk: exynos4: Add G3D clocks
  clk: exynos4: Add camera related clock definitions
  clk: exynos4: Export mout_core clock of Exynos4210
  clk: samsung: Remove unimplemented ops for pll
  clk: exynos4: Export clocks used by exynos cpufreq drivers
  ...

[arnd: add missing #address-cells property in mshc DT node]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

s3c24xx irq cleanup and move into drivers/irqchip

* tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  irqchip: s3c24xx: add devicetree support
  irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
  irqchip: s3c24xx: globally keep track of the created intc instances
  irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
  irqchip: s3c24xx: fix irqlist of second s3c2416 controller
  irqchip: s3c24xx: fix comments on some camera interrupts
  ARM: S3C24XX: move irq driver to drivers/irqchip
  ARM: S3C24XX: add handle_irq function
  ARM: S3C24XX: make s3c24xx_init_intc static
  ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
  ARM: S3C24XX: fix irq parent check
  ARM: S3C24XX: fix redundant checks in the irq mapping function
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

From Linus Walleij <linus.walleij@linaro.org>:

ux500 pinctrl updates for the ARM SoC tree.

* tag 'ux500-pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: 8500: add ab8500-musb pinctrl support
  ARM: ux500: remove redundant DB8500_PIN_SLEEP definition
  ARM: ux500: Add Snowball pin configuration for user LED
  ARM: ux500: u8500: fix pinctrl IDLE state definition for SPI2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-3.10-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: tegra: clock driver development

This branch contains most fixes and enhancements to the Tegra common
clock driver. The main new feature is a driver for Tegra114, which
coupled with later device tree changes enables many devices on that
chip, such as MMC, I2C, etc.

This branch depends on a patch in:

git://git.linaro.org/people/mturquette/linux.git clk-for-3.10

Mike has stated that this branch is stable, and is aware of this
dependency and merge.

Mike's branch is based on v3.9-rc3, which includes a USB change which
causes problems on Tegra. That problem was fixed in v3.9-rc4. Hence,
this branch pulls in v3.9-rc4 to ensure bisectability as much as
possible.

This branch is based on v3.9-rc4, followed by a merge of previous Tegra
"soc" pull request, followed by a merge of clk-for-3.10.

* tag 'tegra-for-3.10-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  clk: tegra: fix enum tegra114_clk to match binding
  clk: tegra: Remove forced clk_enable of uartd
  ARM: dt: Add references to tegra_car clocks
  clk: tegra: devicetree match for nvidia,tegra114-car
  clk: tegra: Implement clocks for Tegra114
  ARM: tegra: Define Tegra114 CAR binding
  clk: tegra: Workaround for Tegra114 MSENC problem
  clk: tegra: Add flags to tegra_clk_periph()
  clk: tegra: Add new fields and PLL types for Tegra114
  clk: tegra: move from a lock bit idx to a lock mask
  clk: tegra: Add PLL post divider table
  clk: tegra: introduce TEGRA_PLL_HAS_LOCK_ENABLE
  clk: tegra: Add TEGRA_PLL_BYPASS flag
  clk: tegra: Refactor PLL programming code
  clk: tegra: provide dummy cpu car ops
  clk: tegra: defer application of init table
  clk: tegra: Fix cdev1 and cdev2 IDs
  clk: tegra: Make gr2d and gr3d clocks children of pll_c
  clk: tegra: Export peripheral reset functions
  clk: tegra: Fix periph_clk_to_bit macro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a snapshot of the stable clk branch at

git://git.linaro.org/people/mturquette/linux.git clk-for-3.10

which is a dependency for the tegra clock changes.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

This is a dependency for the tegra/clk branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	drivers/clocksource/tegra20_timer.c

Merge tag 'omap-for-v3.10/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

GPMC updates from Jon Hunter <jon-hunter@ti.com>:

Adds GPMC (General Purpose Memory Controller) DT support for
NOR flash and Ethernet and includes various GPMC cleans-up
and fixes.

This series is dependent on commit 71856843 (ARM: OMAP: use
consistent error checking) from RMK's clean-up branch and commit
31d9adca (ARM: OMAP2+: Fix broken gpmc support).

* tag 'omap-for-v3.10/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
  ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()
  ARM: OMAP2+: return -ENODEV if GPMC child device creation fails
  ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails
  ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable
  ARM: OMAP2+: Detect incorrectly aligned GPMC base address
  ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
  ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT
  ARM: OMAP2+: Add device-tree support for NOR flash
  ARM: OMAP2+: Add additional GPMC timing parameters
  ARM: OMAP2+: Add function to read GPMC settings from device-tree
  ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()
  ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()
  ARM: OMAP2+: Add function for configuring GPMC settings
  ARM: OMAP2+: Add structure for storing GPMC settings
  ARM: OMAP2+: Add variable to store number of GPMC waitpins
  ARM: OMAP2+: Simplify code configuring ONENAND devices
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:

This series consists mainly of clean-ups for clockevents and
clocksource timers on OMAP2+ devices. The most significant change
in functionality comes from the 5th patch which is changing the
selection of the clocksource timer for OMAP3 and AM335x devices
when gptimers are used for clocksource.

Note that this series depends on 71856843 (ARM: OMAP: use
consistent error checking) in RMK's tree and 960cba67 (ARM:
OMAP5: timer: Update the clocksource name as per clock data)
in omap-for-v3.10/fixes-non-critical. So this branch is based
on a merge of 71856843 and omap-for-v3.10/fixes-non-critical
to avoid non-trivial merge conflicts.

* tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: Fix sparse warning in system timers
  ARM: OMAP2+: Store ID of system timers in timer structure
  ARM: OMAP3: Update clocksource timer selection
  ARM: OMAP2+: Simplify system timers definitions
  ARM: OMAP2+: Simplify system timer clock definitions
  ARM: OMAP2+: Remove hard-coded test on timer ID
  ARM: OMAP2+: Display correct system timer name
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
  ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
  ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.10/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

EHCI platform data related changes for v3.10 merge window.
These are needed for the USB PHY support, and are based on
commit 1f0972f5 from Felipe Balbi's tree as agreed on the
mailing lists.

* tag 'omap-for-v3.10/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: omap3-beagle: Add USB Host support
  ARM: dts: OMAP3: Add HS USB Host IP nodes
  ARM: dts: OMAP4: Add HS USB Host IP nodes
  ARM: OMAP: zoom: Adapt to ehci-omap changes
  ARM: OMAP3: overo: Adapt to ehci-omap changes
  ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes
  ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes
  ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes
  ARM: OMAP3: omap3evm: Adapt to ehci-omap changes
  ARM: OMAP3: igep0020: Adapt to ehci-omap changes
  ARM: OMAP: devkit8000: Adapt to ehci-omap changes
  ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes
  ARM: OMAP3: cm-t35: Adapt to ehci-omap changes
  ARM: OMAP: AM3517evm: Adapt to ehci-omap changes
  ARM: OMAP: AM3517crane: Adapt to ehci-omap changes
  ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes
  ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes
  ARM: OMAP3: Beagle: Adapt to ehci-omap changes
  ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes
  ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

From Michal Simek <michal.simek@xilinx.com>:

* 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: Move timer to generic location
  arm: zynq: Do not use xilinx specific function names
  arm: zynq: Move timer to clocksource interface
  arm: zynq: Use standard timer binding
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

From Tony Prisk <linux@prisktech.co.nz>:

arm: vt8500: Add pinctrl driver for arch-vt8500

This series adds support for the pinctrl/gpio module on all arch-vt8500
supported SoCs.

As part of the review process, some tidy up is also done to
drivers/of/base.c to remove some code that is being constantly duplicated.

Also, a patch for the bcm2835 pinctrl driver is included to take advantage
of the new of/base.c code.

* tag 'vt8500/pinctrl' of git://server.prisktech.co.nz/git/linuxwmt: (606 commits)
  pinctrl: bcm2835: make use of of_property_read_u32_index()
  gpio: vt8500: Remove arch-vt8500 gpio driver
  arm: vt8500: Remove gpio devicetree nodes
  arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
  pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
  arm: vt8500: Increase available GPIOs on arch-vt8500
  of: Remove duplicated code for validating property and value
  of: Add support for reading a u32 from a multi-value property.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Conflicts:
	arch/arm/boot/dts/exynos4.dtsi
	arch/arm/boot/dts/exynos5440.dtsi

Merge tag 'renesas-intc-external-irq2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

From Simon Horman <horms+renesas@verge.net.au>:

Update for Renesas INTC External IRQ pin driver for v3.10

This adds support for shared interrupt lines to the
Renesas INTC External IRQ pin driver which has already
been queued up for v3.10 (tag renesas-intc-external-irq-for-v3.10).

* tag 'renesas-intc-external-irq2-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  irqchip: intc-irqpin: Add support for shared interrupt lines
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The functions exynos4_clk_init and exynos4_clk_register_fixed_ext
are applicable only on Exynos4 non-dt platforms. But when building
Exynos5 platforms without including Exynos4 platforms, the following
errors show up.

arch/arm/mach-exynos/built-in.o: In function `exynos_init_time':
arch/arm/mach-exynos/common.c:446: undefined reference to `exynos4_clk_init'
arch/arm/mach-exynos/common.c:447: undefined reference to `exynos4_clk_register_fixed_ext'

Fix this compilation errors by marking these calls as Exynos4 specific.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

In legacy setup, sclk_mmc{0,1,2,3} used PRE_RATIO bit-field (8-bit wide)
instead of RATIO bit-field (4-bit wide) for dividing clock rate.

With current common clock setup, we are using RATIO bit-field which
is creating FIFO read errors while accessing eMMC. Changing over to
use PRE_RATIO bit-field fixes this issue.

dwmmc_exynos 12200000.dwmmc0: data FIFO error (status=00008020)
mmcblk0: error -5 transferring data, sector 1, nr 7, cmd response 0x900, card status 0x0
end_request: I/O error, dev mmcblk0, sector 1
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
CC: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

This patch adds clock indexes for ACLK_DIV0, ACLK_DIV1,
ACLK_400_MCUISP, ACLK_MCUISP_DIV0, ACLK_MCUISP_DIV1,
DIVACLK_400_MCUISP and DIVACLK_200 so these clocks are
available to the consumers (Exynos4x12 FIMC-IS subsystem).
While at it, indentation of the mux clocks table is
corrected.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Fixes the below compilation error during non-dt build.
drivers/clk/samsung/clk.c: In function 'samsung_clk_of_register_fixed_ext':
drivers/clk/samsung/clk.c:252:2: error: implicit declaration of function 'for_each_matching_node_and_match' [-Werror=implicit-function-declaration]
drivers/clk/samsung/clk.c:252:60: error: expected ';' before '{' token
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Remove duplicated include.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

A gap exists in the binding's clock ID definitions. Fix the clock driver
to be consistent. This allows pclk to be looked up through device tree
and prevents:

ERROR: could not get clock /pmc:pclk(0)
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The UART driver enables the console uart clock, so we don't need to do that
anymore in this file.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Add references to tegra_car clocks for the basic device nodes. Also remove
the clock-frequency property of the serial node as the UART driver can now
use the clock framework to obtain the frequency.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Implement clocks for Tegra114.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The device tree binding models Tegra114 CAR (Clock And Reset) as a single
monolithic clock provider.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Workaround a hardware bug in MSENC during clock enable.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

We will need some tegra peripheral clocks with the CLK_IGNORE_UNUSED flag,
most notably mselect, which is a bridge between AXI and most peripherals.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Tegra114 introduces new PLL types. This requires new clocktypes as well
as some new fields in the pll structure.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

PLLC2 and PLLC3 on Tegra114 have separate phaselock and frequencylock bits.
So switch to a lock mask to be able to test both at the same time.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Some PLLs in Tegra114 don't use a power of 2 mapping for the post divider.
Introduce a table based approach and switch PLLU to it.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Tegra114 PLLC2 and PLLC3 don't have a lock enable bit. The lock bits are
always functional.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Not all PLLs in Tegra114 have a bypass bit. Adapt the common code to only use
this bit when available.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Refactor the PLL programming code to make it useable by the new PLL types
introduced by Tegra114.

The following changes were done:

* Split programming the PLL into updating m,n,p and updating cpcon
* Move locking from _update_pll_cpcon() to clk_pll_set_rate()
* Introduce _get_pll_mnp() helper
* Move check for identical m,n,p values to clk_pll_set_rate()
* struct tegra_clk_pll_freq_table will always contain the values as defined
  by the hardware.
* Simplify the arguments to clk_pll_wait_for_lock()
* Split _tegra_clk_register_pll()
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

tegra_boot_secondary() relies on some of the car ops. This means having an
uninitialized tegra_cpu_car_ops will lead to an early boot panic.
Providing a dummy struct avoids this and makes adding Tegra114 clock support
in a bisectable way a lot easier.
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The Tegra clock driver is initialized during the ARM machine descriptor's
.init_irq() hook. It can't be initialized earlier, since dynamic memory
usage is required. It can't be initialized later, since the .init_timer()
hook needs the clocks initialized. However, at this time, udelay()
doesn't work.

The Tegra clock initialization table may enable some PLLs. Enabling a PLL
may require usage of udelay(). Hence, this can't happen right when the
clock driver is initialized.

To solve this, separate the clock driver initialization from the clock
table processing, so they can execute at separate times.
Signed-off-by: Stephen Warren <swarren@nvidia.com>

Correct IDs for cdev1 and cdev2 are 94 and 93 respectively.
Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
[swarren: split into separate driver and device-tree patches]
Signed-off-by: Stephen Warren <swarren@nvidia.com>

By default these clocks are children of pll_m, but in downstream kernels
they are reparented to pll_c. While at it, decrease their frequencies to
300 MHz because the defaults aren't in the specified range.

gr2d can reportedly run at much higher frequencies, but 300 MHz works
and is a more conservative default.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The tegra_periph_reset_assert() and tegra_periph_reset_deassert()
functions can be used by drivers to reset peripherals. In order to allow
such drivers to be built as modules, export the functions.

Note that this restores the status quo as the functions were exported
before the move to the drivers/clk tree.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>

The parameter name should be "gate", not "periph".  This worked, however,
because it happens that everywhere periph_clk_to_bit is called, "gate" was
in the local scope.
Signed-off-by: Yen Lin <yelin@nvidia.com>
Signed-off-by: Andrew Chew <achew@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Warren <swarren@nvidia.com>