- 22 Jul, 2019 34 commits
-
-
A Sun authored
This patch schedules a USB reset device call following a USB clear halt error. The issues solved, and patch implementation, are similar to those found in drivers/hid/usbhid/hid-core.c. As seen on very rare occasions approximately one time per month (mceusb device 2304:0225 in this sample) Jul 27 2018 15:09:39 [59388.696941] mceusb 1-1.1.2:1.0: Error: urb status = -32 (RX HALT) [59388.698838] mceusb 1-1.1.2:1.0: rx clear halt error -32 the device can get into RX or TX HALT state where usb_clear_halt() also fails and also returns -EPIPE (HALT/STALL). After which, all further mceusb device control and data I/O always fail with HALT/STALL. Subsequently, the entire mceusb device no longer functions. Cause and problem replication conditions remain unknown. Further troubleshooting reveals usb_reset_device() restores mceusb device operation. Patch test 1: Hot unplugging the mceusb device triggers USB RX HALT and USB clear halt errors. A mceusb_dev_disconnect() call follows unplug. This patch's reset device call invokes an extra mceusb_dev_probe() mceusb_dev_disconnect() cycle, before the mceusb driver detaches. The additional probe/disconnect verifies the patch's device reset code executed. But note this patch is for USB clear halt error cases not caused by unplugging the mceusb device. Patch test 2: Simulate a RX HALT and a clear halt error with instrumented code in the driver. Jul 12 2019 19:41:18 [522745.263104] mceusb 1-1.3:1.0: set rx halt retval, 0 [522745.263943] mceusb 1-1.3:1.0: Error: rx urb status = -32 (RX HALT) [522745.263970] mceusb 1-1.3:1.0: kevent 1 scheduled [522745.264016] mceusb 1-1.3:1.0: kevent handler called (flags 0x2) [522745.272883] mceusb 1-1.3:1.0: rx clear halt status = 0 [522745.272917] mceusb 1-1.3:1.0: stuck RX HALT state requires USB Reset Device to clear [522745.273005] mceusb 1-1.3:1.0: mceusb_dev_disconnect called [522745.702815] usb 1-1.3: reset full-speed USB device number 14 using dwc_otg [522745.836812] mceusb 1-1.3:1.0: mceusb_dev_probe called [522745.836823] mceusb 1-1.3:1.0: acceptable bulk inbound endpoint found [522745.836832] mceusb 1-1.3:1.0: acceptable bulk outbound endpoint found ... The result matches what is expected when the device gets into a real rx clear halt error case by itself. This is the same sequence of messages when manually invoking the ./usbreset command line utility with an unpatched mceusb driver. Signed-off-by:
A Sun <as1033x@comcast.net> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Arnd Bergmann authored
When CONFIG_DVB_DIB9000 is disabled, we can still compile code that now fails to link against dibx000_i2c_set_speed: drivers/media/usb/dvb-usb/dib0700_devices.o: In function `dib01x0_pmu_update.constprop.7': dib0700_devices.c:(.text.unlikely+0x1c9c): undefined reference to `dibx000_i2c_set_speed' The call sites are both through dib01x0_pmu_update(), which gets passed an 'i2c' pointer from dib9000_get_i2c_master(), which has returned NULL. Checking this pointer seems to be a good idea anyway, and it avoids the link failure in most cases. Sean Young found another case that is not fixed by that, where certain gcc versions leave an unused function in place that causes the link error, but adding an explict IS_ENABLED() check also solves this. Fixes: b7f54910 ("V4L/DVB (4647): Added module for DiB0700 based devices") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sean Young authored
Ensure we do not access the buffer beyond the end if no 0xff byte is encountered. Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Sean Young authored
The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch filter removes pulses/spaces shorter than 294 microseconds. Tested on a BananaPi R2. Signed-off-by:
Sean Wang <sean.wang@kernel.org> Signed-off-by:
-
Sean Young authored
This lists all the protocols that the kernel knows about, however there are no users. Signed-off-by:
-
Sean Young authored
RC_PROTO_BIT_ALL includes protocols like unknown and other that do not have IR decoders by definition. If these protocols are set in the allowed_protocols, they will show in the protocols sysfs file but cannot be enabled. Signed-off-by:
-
Jonas Karlman authored
Add necessary bits to support MPEG2 decoding on RK3328. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Jonas Karlman authored
Update devicetree binding documentation for Rockchip VPU on RK3328. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
ZhiChao Yu authored
Introduce VP8 decoding support in RK3288. Signed-off-by:
ZhiChao Yu <zhichao.yu@rock-chips.com> Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
Only one field needs to be validated: 'num_dct_parts'. This field is used to iterate over the user-provided array 'dct_part_sizes'. Signed-off-by:
-
Pawel Osciak authored
Add the parsed VP8 frame pixel format and controls, to be used with the new stateless decoder API for VP8 to provide parameters for accelerator (aka stateless) codecs. Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
-
Ezequiel Garcia authored
Rework std_validate moving the compound controls to its own validation function. While here, fix the pointer math to account the index parameter. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Hans Verkuil authored
The device_caps in struct video_device are already set correctly, so there is no need to set them in querycap again. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
-
Hans Verkuil authored
Instead of filling in the struct v4l2_capability device_caps field, fill in the struct video_device device_caps field. That way the V4L2 core knows what the capabilities of the video device are. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The V4L2 core sets the format description and flags for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. And in am437x-vpfe.c drop an unnecessary f->type assignment in vpfe_enum_fmt(). Signed-off-by:
-
Hans Verkuil authored
The V4L2 core sets the format description and flags for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. Note that bcm2835-camera.c: the formats array still stores the flags field for compressed formats since that information is used elsewhere in the driver. But enum_fmt doesn't use it anymore, since the core will set the COMPRESSED flag correctly. Signed-off-by:
-
Hans Verkuil authored
The V4L2 core sets the description for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. Signed-off-by:
-
Hans Verkuil authored
The V4L2 core sets the description for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. Signed-off-by:
-
Hans Verkuil authored
The v4l_fill_fmtdesc() is supposed to be updated whenever a new pixelformat is added, but a bunch of recently added pixelformats were forgotten. Update the list. Also change a few lower case words to upper case to keep the same style. Signed-off-by:
-
Mauro Carvalho Chehab authored
Linus 5.3-rc1 * tag 'v5.3-rc1': (12816 commits) Linus 5.3-rc1 iommu/amd: fix a crash in iova_magazine_free_pfns hexagon: switch to generic version of pte allocation typo fix: it's d_make_root, not d_make_inode... dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object' x86/entry/64: Prevent clobbering of saved CR2 value smp: Warn on function calls from softirq context KVM: x86: Add fixed counters to PMU filter KVM: nVMX: do not use dangling shadow VMCS after guest reset KVM: VMX: dump VMCS on failed entry KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup KVM: Boost vCPUs that are delivering interrupts KVM: selftests: Remove superfluous define from vmx.c ...
-
- 21 Jul, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
