- 18 Feb, 2019 2 commits
-
-
Kuninori Morimoto authored
commit da215354 ("ASoC: simple-card: merge simple-scu-card") merged simple-card and simple-scu-card. Then it had refcount underflow bug. This patch fixup it. We will get below error without this patch. OF: ERROR: Bad of_node_put() on /sound CPU: 3 PID: 237 Comm: kworker/3:1 Not tainted 5.0.0-rc6+ #1514 Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT) Workqueue: events deferred_probe_work_func Call trace: dump_backtrace+0x0/0x150 show_stack+0x24/0x30 dump_stack+0xb0/0xec of_node_release+0xd0/0xd8 kobject_put+0x74/0xe8 of_node_put+0x24/0x30 __of_get_next_child+0x50/0x70 of_get_next_child+0x40/0x68 asoc_simple_card_probe+0x604/0x730 platform_drv_probe+0x58/0xa8 ... Reported-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Bard liao authored
Topology resources are no longer needed if any element failed to load. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 12 Feb, 2019 1 commit
-
-
Sylwester Nawrocki authored
Make sure i2s->rclk_srcrate is properly initialized also during playback through the secondary DAI. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 07 Feb, 2019 2 commits
-
-
Sylwester Nawrocki authored
This patch moves clk_get_rate() call from trigger() to hw_params() callback to avoid calling sleeping clk API from atomic context and prevent deadlock as indicated below. Before this change clk_get_rate() was being called with same spinlock held as the one passed to the clk API when registering clocks exposed by the I2S driver. [ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test [ 82.124235] 3 locks held by speaker-test/1554: [ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38 [ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268 [ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.154650] irq event stamp: 8144 [ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c [ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58 [ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c [ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168 [ 82.188964] Preemption disabled at: [ 82.188967] [<00000000>] (null) [ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191 [ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14) [ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8) [ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8) [ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c) [ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24) [ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec) [ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c) [ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4) [ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140) [ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30) [ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78) [ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268) [ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec) [ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60) [ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28) [ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0) [ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80 [ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000 [ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c [ 82.355789] [ 82.357245] ====================================================== [ 82.363397] WARNING: possible circular locking dependency detected [ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W [ 82.376395] ------------------------------------------------------ [ 82.382548] speaker-test/1554 is trying to acquire lock: [ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec [ 82.394593] [ 82.394593] but task is already holding lock: [ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4 [ 82.408197] [ 82.408197] which lock already depends on the new lock. [ 82.416343] [ 82.416343] the existing dependency chain (in reverse order) is: [ 82.423795] [ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}: [ 82.430472] clk_mux_set_parent+0x34/0xb8 [ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c [ 82.440347] clk_set_parent+0x38/0x6c [ 82.444509] of_clk_set_defaults+0xc8/0x308 [ 82.449186] of_clk_add_provider+0x84/0xd0 [ 82.453779] samsung_i2s_probe+0x408/0x5f8 [ 82.458376] platform_drv_probe+0x48/0x98 [ 82.462879] really_probe+0x224/0x3f4 [ 82.467037] driver_probe_device+0x70/0x1c4 [ 82.471716] bus_for_each_drv+0x44/0x8c [ 82.476049] __device_attach+0xa0/0x138 [ 82.480382] bus_probe_device+0x88/0x90 [ 82.484715] deferred_probe_work_func+0x6c/0xbc [ 82.489741] process_one_work+0x200/0x740 [ 82.494246] worker_thread+0x2c/0x4c8 [ 82.498408] kthread+0x128/0x164 [ 82.502131] ret_from_fork+0x14/0x20 [ 82.506204] (null) [ 82.508976] [ 82.508976] -> #0 (prepare_lock){+.+.}: [ 82.514264] __mutex_lock+0x60/0xa3c [ 82.518336] mutex_lock_nested+0x1c/0x24 [ 82.522756] clk_prepare_lock+0x78/0xec [ 82.527088] clk_core_get_rate+0xc/0x5c [ 82.531421] i2s_trigger+0x490/0x6d4 [ 82.535494] soc_pcm_trigger+0x100/0x140 [ 82.539913] snd_pcm_do_start+0x2c/0x30 [ 82.544246] snd_pcm_action_single+0x38/0x78 [ 82.549012] snd_pcm_ioctl+0x910/0x1268 [ 82.553345] do_vfs_ioctl+0x90/0x9ec [ 82.557417] ksys_ioctl+0x34/0x60 [ 82.561229] ret_fast_syscall+0x0/0x28 [ 82.565477] 0xbeea384c [ 82.568421] [ 82.568421] other info that might help us debug this: [ 82.568421] [ 82.576394] Possible unsafe locking scenario: [ 82.576394] [ 82.582285] CPU0 CPU1 [ 82.586792] ---- ---- [ 82.591297] lock(&(&pri_dai->spinlock)->rlock); [ 82.595977] lock(prepare_lock); [ 82.601782] lock(&(&pri_dai->spinlock)->rlock); [ 82.608975] lock(prepare_lock); [ 82.612268] [ 82.612268] *** DEADLOCK *** Fixes: 647d04f8 ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined") Reported-by: Krzysztof Kozłowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Jiada Wang authored
Currently "0xf << 36" is used to clear SSIU-9 internal buffer state, which overflows 32-bit value according to user reference manual, it is always bit4 ~ bit7 of SSI_SYS_STATUS[1,3,5,7] registers indicate SSIU-9's buffer state, so "0xf << 4" should be used. This patch fix incorrect shifting issue in SSIU-9 case Fixes: commit b7169dde ("ASoC: rsnd: remove RSND_REG_ from rsnd_reg") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Feb, 2019 2 commits
-
-
Kuninori Morimoto authored
commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") added new rsnd_ssi_prepare() and moved rsnd_ssi_master_clk_start() to .prepare. But, ssi user count (= ssi->usrcnt) is incremented at .init (= rsnd_ssi_init()). Because of these timing exchange, ssi->usrcnt check at rsnd_ssi_master_clk_start() should be adjusted. Otherwise, 2nd master clock setup will be no check. This patch fixup this issue. Fixes: commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Reported-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
KASAN reports and additional traces point to out-of-bounds accesses to the dapm_up_seq and dapm_down_seq lookup tables. The indices used are larger than the array definition. Fix by adding missing entries for the new widget types in these two lookup tables, and align them with PGA values. Also the sequences for the following widgets were not defined. Since their values defaulted to zero, assign them explicitly snd_soc_dapm_input snd_soc_dapm_output snd_soc_dapm_vmid snd_soc_dapm_siggen snd_soc_dapm_sink Fixes: 8a70b454 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.'). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Feb, 2019 2 commits
-
-
Guennadi Liakhovetski authored
rmmod/modprobe tests expose a kernel oops when accessing the dai driver pointer. This comes from the topology design which operates in multiple passes. Each object removal happens at a specific iteration, and the code checks for the iteration (order) number after the memory containing the order was freed. Fix this be clearing a reference to the dai driver and check its validity to avoid dereferences. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
Renesas sound device has many IPs and many situations. If platform/board uses MIXer, situation will be more complex. To avoid duplicate DVC kctrl registration when MIXer was used, it had original flags. But it was issue when sound card was re-binded, because no one can't cleanup this flags then. To solve this issue, commit 9c698e84 ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") checks registered card->controls, because if card was re-binded, these were cleanuped automatically. This patch could solve re-binding issue. But, it start to avoid MIX kctrl. To solve these issues, we need below. To avoid card re-binding issue: check registered card->controls To avoid duplicate DVC registration: check registered rsnd_kctrl_cfg To allow multiple MIX registration: check registered rsnd_kctrl_cfg This patch do it. Fixes: 9c698e84 ("ASoC: rsnd: tidyup registering method for rsnd_kctrl_new()") Reported-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-By: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 25 Jan, 2019 1 commit
-
-
Charles Keepax authored
For devices implemented as a MFD it is common to only have a single node in devicetree representing the whole device. As such when looking up components in soc_find_components we should match against both the devices of_node and the devices parent's of_node, as is already done in the rest of the ASoC core. This causes regressions for some DAI links at the moment as soc_find_component was recently added as a check in soc_init_dai_link. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Jan, 2019 1 commit
-
-
Shuming Fan authored
AD/DA ASRC function control two ASRC clock sources separately. Whether AD/DA filter select which clock source, we enable AD/DA ASRC function for all cases. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Jan, 2019 1 commit
-
-
Fabio Estevam authored
I prefer to use my personal email address for kernel related work. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Jan, 2019 1 commit
-
-
Russell King authored
hdmi-codec oopses the kernel when it is unbound from a successfully bound audio subsystem, and is then rebound: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = ee3f0000 [0000001c] *pgd=3cc59831 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950 CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762 Hardware name: Marvell Dove (Cubox) PC is at hdmi_dai_probe+0x68/0x80 LR is at find_held_lock+0x20/0x94 pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013 sp : ee15bd28 ip : eebd8b1c fp : c093b488 r10: ee048000 r9 : eebdab18 r8 : ee048600 r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100 r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051 Process bash (pid: 1005, stack limit = 0xee15a248) ... [<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70) [<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c) [<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378) [<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54) [<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84) [<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260) [<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98) This happens because hdmi_dai_probe() attempts to access the HDMI codec private data, but this has not been assigned by hdmi_dai_probe() before it calls devm_snd_soc_register_component(). Move the call to dev_set_drvdata() before devm_snd_soc_register_component() to avoid this oops. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- 15 Jan, 2019 7 commits
-
-
Gustavo A. R. Silva authored
Check return value from call to devm_kzalloc() in order to prevent a potential NULL pointer dereference. Also, notice that it makes no sense to allocate any resources if res = platform_get_resource(pdev, IORESOURCE_MEM, 0); fails, so move the call to devm_kzalloc() below the mentioned code. Lastly, improve the use of sizeof in the call to devm_kzalloc() by changing it from sizeof(struct i2s_dev_data) to sizeof(*adata) This issue was detected with the help of Coccinelle. Fixes: ac289c7e ("ASoC: amd: add ACP3x PCM platform driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Gustavo A. R. Silva authored
There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on rt5514_dsp. This issue was detected with the help of Coccinelle. Fixes: 6eebf35b ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Shuming Fan authored
Fix typo which causes headphone no sound while using BCLK as PLL source. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Matthias Reichl authored
cpu and platform are optional components in DAI links. For example codec-codec links usually have no platform set. Call snd_soc_find_component only if the name or of_node of a cpu or platform is set. Otherwise it will return NULL and soc_init_dai_link bails out immediately with -EPROBE_DEFER, meaning registering a card with NULL cpu or platform in DAI links can never succeed. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
There are some use cases where you're checking for a lot of things on a card and it makes sense that you might end up trying to call snd_soc_find_component() without either a name or an of_node. Currently in that case we try to dereference the name and crash but it's more useful to allow the caller to just treat that as a case where we don't find anything, that error handling will already exist. Inspired by a patch from Ajit Pandey fixing some callers. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 14 Jan, 2019 1 commit
-
-
Curtis Malainey authored
snd_soc_init_platform initializes pointers to snd_soc_dai_link which is statically allocated and it does this by devm_kzalloc. In the event of an EPROBE_DEFER the memory will be freed and the pointers are left dangling. snd_soc_init_platform sees the dangling pointers and assumes they are pointing to initialized memory and does not reallocate them on the second probe attempt which results in a use after free bug since devm has freed the memory from the first probe attempt. Since the intention for snd_soc_dai_link->platform is that it can be set statically by the machine driver we need to respect the pointer in the event we did not set it but still catch dangling pointers. The solution is to add a flag to track whether the pointer was dynamically allocated or not. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Jan, 2019 1 commit
-
-
Rohit kumar authored
soc_init_dai_link() calls soc_find_component() which needs to be within client_mutex lock. Add client_mutex lock around soc_init_dai_link() in snd_soc_register_card() to avoid lockdep warning. Fixes: 8780cf11 ("ASoC: soc-core: defer card probe until all component is added to list") Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 09 Jan, 2019 2 commits
-
-
Mac Chiang authored
move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once. As the result, remove the platform_clock_controls since no need to control clock anymore. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mac Chiang <mac.chiang@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Ajit Pandey authored
DAI component probe is not called if it is not present in component list during sound card registration. Check if component is available in component list for platform and cpu dai before soundcard registration. Signed-off-by: Ajit Pandey <ajitp@codeaurora.org> Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 07 Jan, 2019 2 commits
-
-
Kangjie Lu authored
snd_pcm_lib_malloc_pages() may fail, so let's check its status and return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
b-ak authored
During the bootup of the kernel, the DAPM bias level is in the OFF state. As soon as the DAPM framework kicks in it pushes the codec into STANDBY state. The probe function doesn't prepare the clock, and STANDBY state does a clk_disable_unprepare() without checking the previous state. This leads to an OOPS. Not transitioning from an OFF state to the STANDBY state fixes the problem. Signed-off-by: b-ak <anur.bhargav@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
- 04 Jan, 2019 2 commits
-
-
Peter Ujfalusi authored
McASP can loose it's context when runtime_pm is disabled. Save and restore the context when suspending and resuming the device. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Yizhuo authored
Inside function rt274_i2c_probe(), if regmap_read() function returns -EINVAL, then local variable "val" leaves uninitialized but used in if statement. This is potentially unsafe. Signed-off-by: Yizhuo <yzhai003@ucr.edu> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Jan, 2019 12 commits
-
-
Shuming Fan authored
The ADC mixer setting needs to restore to default value after calibration. Signed-off-by: Shuming Fan <shumingf@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Sinan Kaya authored
After 'commit 5d32a665 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")' dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. This code relies on IOSF_MBI and IOSF_MBI depends on PCI. For this reason, add a direct dependency on CONFIG_PCI to the IOSF_MBI driver. Fixes: 5d32a665 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The problem is seen in the q6asm_dai_compr_set_params() function: ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys, (prtd->pcm_size / prtd->periods), ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ prtd->periods); In this code prtd->pcm_size is the buffer_size and prtd->periods comes from params->buffer.fragments. If we allow the number of fragments to be zero then it results in a divide by zero bug. One possible fix would be to use prtd->pcm_count directly instead of using the division to re-calculate it. But I decided that it doesn't really make sense to allow zero fragments. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
We can't return directly if snd_dma_alloc_pages() fails; we first need to free prtd->audio_client and prtd. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The q6asm_audio_client_alloc() doesn't return NULL, it returns error pointers. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The q6asm_fe_dais[] array has MAX_SESSIONS (8) elements so the > comparison should be >= or we access one element beyond the end of the array. Fixes: 22930c79 ("ASoC: qdsp6: q6asm-dai: Add support to compress offload") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
We accidentally call mutex_unlock(&pcm512x->mutex); twice in a row. I re-wrote the error handling to use "goto unlock;" instead of returning directly. Hopefully, it makes the code a little simpler. Fixes: 3500f1c5 ("ASoC: pcm512x: Implement the digital_mute interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviwed-by: Dimitris Papavasiliou <dpapavas@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Maruthi Srinivas Bayyavarapu authored
Changed License header from C to C++ style comment block. Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rander Wang authored
For some reason this field was set to zero when all other drivers use .dynamic = 1 for front-ends. This change was tested on Dell XPS13 and has no impact with the existing legacy driver. The SOF driver also works with this change which enables it to override the fixed topology. Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Geert Uytterhoeven authored
Fixes: 33f8db9a ("ASoC: xlnx: enable i2s driver build") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Dan Carpenter authored
The intent was to print the address as a hexadecimal but there is an extra "u" in the "0x%08ulx" format specification so it is displayed as decimal. Fixes: aef3b06a ("[ALSA] SH7760 ASoC support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Rohit kumar authored
Headset codec is connected over PRIMARY_MI2S interface. Call set_jack for codec associated with Primary Mi2s interface. Also, set_jack to NULL when jack is freed. Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-