Skip to content

L
linux
Switch branch/tag
  1. 07 Sep, 2016 2 commits
  3. 24 Aug, 2016 1 commit
  5. 23 Aug, 2016 4 commits
    • Paul Gortmaker's avatar
      gpio: vf610: drop unused MODULE_ tags from non-modular code · adaaf63e
      Paul Gortmaker authored 
      The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_VF610
drivers/gpio/Kconfig:   def_bool y

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
is now contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      adaaf63e
    • Paul Gortmaker's avatar
      gpio: spear-spics: drop unused MODULE_ tags from non-modular code · b29c5dda
      Paul Gortmaker authored 
      The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_SPEAR_SPICS
drivers/gpio/Kconfig:   bool "ST SPEAr13xx SPI Chip Select as GPIO support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
is now contained at the top of the file in the comments.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      b29c5dda
    • Paul Gortmaker's avatar
      gpio: mxc: drop unused MODULE_ tags from non-modular code · 2c8d6c86
      Paul Gortmaker authored 
      The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MXC
drivers/gpio/Kconfig:   def_bool y

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Note the original e-mail had a missing/typo'd @ symbol anyway.

We don't replace module.h with init.h since the file already has that.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Juergen Beisert <kernel@pengutronix.de>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      2c8d6c86
    • Paul Gortmaker's avatar
      gpio: msic: drop unused MODULE_ tags from non-modular code · 98102880
      Paul Gortmaker authored 
      The Kconfig currently controlling compilation of this code is:

drivers/gpio/Kconfig:config GPIO_MSIC
drivers/gpio/Kconfig:   bool "Intel MSIC mixed signal gpio support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.

We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

We don't replace module.h with init.h since the file already has that.

Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: linux-gpio@vger.kernel.org
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      98102880
  7. 19 Aug, 2016 5 commits
  9. 11 Aug, 2016 7 commits
  11. 10 Aug, 2016 10 commits
  13. 08 Aug, 2016 5 commits
  15. 07 Aug, 2016 6 commits
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 857953d7
      Linus Torvalds authored 
      Pull more block fixes from Jens Axboe:
 "As mentioned in the pull the other day, a few more fixes for this
  round, all related to the bio op changes in this series.

  Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf.  I
  wanted to do that change right after or right before -rc1, so that
  risk of conflict was reduced.  I just rebased the series on top of
  current master, and no new ->bi_rw usage has snuck in"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: rename bio bi_rw to bi_opf
  target: iblock_execute_sync_cache() should use bio_set_op_attrs()
  mm: make __swap_writepage() use bio_set_op_attrs()
  block/mm: make bdev_ops->rw_page() take a bool for read/write
      857953d7
    • Linus Torvalds's avatar
      Merge tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux · 635a4ba1
      Linus Torvalds authored 
      Pull drm zpos property support from Dave Airlie:
 "This tree was waiting on some media stuff I hadn't had time to get a
  stable branchpoint off, so I just waited until it was all in your tree
  first.

  It's been around a bit on the list and shouldn't affect anything
  outside adding the generic API and moving some ARM drivers to using
  it"

* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
  drm: rcar: use generic code for managing zpos plane property
  drm/exynos: use generic code for managing zpos plane property
  drm: sti: use generic zpos for plane
  drm: add generic zpos property
      635a4ba1
    • Jens Axboe's avatar
      block: rename bio bi_rw to bi_opf · 1eff9d32
      Jens Axboe authored 
      Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      1eff9d32
    • Jens Axboe's avatar
      target: iblock_execute_sync_cache() should use bio_set_op_attrs() · 31c64f78
      Jens Axboe authored 
      The original commit missed this function, it needs to mark it a
write flush.

Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32 ("target: use bio op accessors")
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      31c64f78
    • Jens Axboe's avatar
      mm: make __swap_writepage() use bio_set_op_attrs() · ba13e83e
      Jens Axboe authored 
      Cleaner than manipulating bio->bi_rw flags directly.
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      ba13e83e
    • Jens Axboe's avatar
      block/mm: make bdev_ops->rw_page() take a bool for read/write · c11f0c0b
      Jens Axboe authored 
      Commit abf54548 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.

Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.
Reviewed-by: default avatarMike Christie <mchristi@redhat.com>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
      c11f0c0b
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7