- 17 Mar, 2013 9 commits
-
-
Christoph Paasch authored
TCPCT uses option-number 253, reserved for experimental use and should not be used in production environments. Further, TCPCT does not fully implement RFC 6013. As a nice side-effect, removing TCPCT increases TCP's performance for very short flows: Doing an apache-benchmark with -c 100 -n 100000, sending HTTP-requests for files of 1KB size. before this patch: average (among 7 runs) of 20845.5 Requests/Second after: average (among 7 runs) of 21403.6 Requests/Second Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Silviu-Mihai Popescu authored
This uses the resource_size() function instead of explicit computation. Signed-off-by:
Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by:
-
stephen hemminger authored
Trivial sparse detected functions that should be static. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Cong Wang authored
Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Conflicts: net/openvswitch/vport-internal_dev.c Jesse Gross says: ==================== A couple of minor enhancements for net-next/3.10. The largest is an extension to allow variable length metadata to be passed to userspace with packets. There is a merge conflict in net/openvswitch/vport-internal_dev.c: A existing commit modifies internal_dev_mac_addr() and a new commit deletes it. The new one is correct, so you can just remove that function. ==================== Signed-off-by: -
Joe Perches authored
Reduce the number of calls required to alloc a zeroed block of memory. Trivially reduces overall object size. Other changes around these removals o Neaten call argument alignment o Remove an unnecessary OOM message after dma_alloc_coherent failure o Remove unnecessary gfp_t stack variable Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Lai Jiangshan authored
DEFINE_STATIC_SRCU() defines srcu struct and do init at build time. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
-
David Stevens authored
This patch generalizes VXLAN forwarding table entries allowing an administrator to: 1) specify multiple destinations for a given MAC 2) specify alternate vni's in the VXLAN header 3) specify alternate destination UDP ports 4) use multicast MAC addresses as fdb lookup keys 5) specify multicast destinations 6) specify the outgoing interface for forwarded packets The combination allows configuration of more complex topologies using VXLAN encapsulation. Changes since v1: rebase to 3.9.0-rc2 Signed-Off-By:
David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
Erwan Yvin authored
caif_shm is an old implementation caif_shm will be replaced by caif_virtio [ As explained by Linus Walleij: "U5500 used this, but was cancelled and the silicon did not reach anyone outside ST-Ericsson. Then for the next platforms, we have gone for the leaner & cleaner approach of using virtio, rpmesg and rproc." ] Signed-off-by:
Erwan Yvin <erwan.yvin@stericsson.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Sjur Brendeland <sjur.brandeland@stericsson.com> Signed-off-by:
-
- 15 Mar, 2013 9 commits
-
-
Li RongQing authored
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Li RongQing authored
replace ip_fast_csum with csum_replace2 to save cpu cycles Signed-off-by:
-
Li RongQing authored
The default value is 128, not 256 #grep gc_thresh1 net/ -rI net/decnet/dn_neigh.c: .gc_thresh1 = 128, net/ipv6/ndisc.c: .gc_thresh1 = 128, net/ipv4/arp.c: .gc_thresh1 = 128, Signed-off-by:
-
Joe Perches authored
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by:
-
Somnath Kotur authored
This is needed as the earlier method of manipulating this register via PCI Config space is disallowed by certain Hypervisors. Signed-off-by:
Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by:
-
Somnath Kotur authored
As the NIC PCI function may be used by other protocols, the chip interrupts must be enabled in be_probe() itself rather than be_open(). Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Fernando Luis Vazquez Cao authored
COMPAT_NET_DEV_OPS was removed a while back and with it the definition of netdev_resync_ops() went away. Let's finish the clean-up. Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Reilly Grant authored
The resource ID used for VM socket control packets (0) is already used for the VMCI_GET_CONTEXT_ID hypercall so a new ID (15) must be used when the guest sends these datagrams to the hypervisor. The hypervisor context ID must also be removed from the internal blacklist. Signed-off-by:
Reilly Grant <grantr@vmware.com> Acked-by:
Andy King <acking@vmware.com> Signed-off-by:
-
nikolay@redhat.com authored
This patch allows LRO aggregation on bonded devices that contain an NX3031 device. It also adds a for_each_netdev_in_bond_rcu(bond, slave) macro which executes for each slave that has bond as master. V3: After testing and discussing this with Rajesh, I decided to keep the vlan ip cache and just rename it to ip_cache since it will store bond ip addresses too. A new master flag has been added to the ip cache to denote that the address has been added because of a master device. I've taken care of the enslave/release cases by checking for various combinations of events and flags (e.g. netxen has a master, it's a bond master and it's not marked as a slave means it is being enslaved and is dev_open()ed in bond_enslave). I've changed netxen_free_ip_list() to have a "master" parameter which causes all IP addresses marked as master to be deleted (used when a netxen is being released). I've made the patch use the new upper device API as well. The following cases were tested: - bond -> netxen - vlan -> netxen - vlan -> bond -> netxen V2: Remove local ip caching, retrieve addresses dynamically and restore them if necessary. Note: Tested with NX3031 adapter. Tested-by:Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
Andy Gospodarek <agospoda@redhat.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
- 14 Mar, 2013 22 commits
-
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - introduction of the new Network Coding component. This new mechanism aims to increase throughput by fusing multiple packets in one transmission. - minor cleanups Signed-off-by: -
Arvind Bhushan authored
This patch removes chip specific operations from the common hardware paths, as well as the Makefile change to accomodate the new files. Signed-off-by:
Arvind Bhushan <arvindb@chelsio.com> Signed-off-by:
Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by:
-
Arvind Bhushan authored
This patch defines the common operations to support multiple chips. It includes common header file modifications to support the current chips (T4 and T5). It also includes the following bug fixes: - reconfirms the rnode state after an implicit logo. - corrects the stats array size. - sets up and checks flags correctly when coming up as master and finding the card initialized Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Arvind Bhushan authored
This patch creates a new file for T5 adapter operations. Signed-off-by:
-
Arvind Bhushan authored
This patch separates T4 adapter operations into a new file. Signed-off-by:
-
Vipul Pandya authored
T5 adapter does not support onchip queue memory. Present logic fails to allocate QP for T5 and returns an error. Also, if module parameter ocqp_support is zero then we are unable to allocate QP which should not be the case. Ideally if ocqp_support parameter is 0 or onchip queue support is disable then host QP should be allocated before returning an error. Signed-off-by:
Vipul Pandya <vipul@chelsio.com> Signed-off-by:
-
Vipul Pandya authored
Always bump the tcam_full stat. Also, bump wr reply timeout to 30 seconds. Signed-off-by:
-
Vipul Pandya authored
Signed-off-by:
-
Vipul Pandya authored
It enables direct DMA by HW to memory region PBL arrays and fast register PBL arrays from host memory, vs the T4 way of passing these arrays in the WR itself. The result is lower latency for memory registration, and larger PBL array support for fast register operations. This patch also updates ULP_TX_MEM_WRITE command fields for T5. Ordering bit of ULP_TX_MEM_WRITE is at bit position 22 in T5 and at 23 in T4. Signed-off-by:
-
Vipul Pandya authored
Both DB Flow-Control and DB Coalescing are disabled by default on T5 Signed-off-by:
-
Vipul Pandya authored
Signed-off-by:
-
Vipul Pandya authored
Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Santosh Rastapur authored
All T5 adapters will only support VFs on PF0-3 despite the ability of the hardware to support them on PF4-7. This keeps our T4 and T5 adapters more similar which simplifies host driver software. Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
This patch implements a low latency Write Combining (aka Write Coalescing) work request path. PCIE maps User Space Doorbell BAR2 region writes to the new interface to SGE. SGE pulls a new message from PCIE new interface and if its a coalesced write work request then pushes it for processing. This patch copies coalesced work request to memory mapped BAR2 space. Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
Santosh Rastapur authored
Signed-off-by:
-
