- 13 Oct, 2017 40 commits
-
-
Javier González authored
Implement a generic path for sending sync I/O on LightNVM. This allows to reuse the standard synchronous path trough blk_execute_rq(), instead of implementing a wait_for_completion on the target side (e.g., pblk). Signed-off-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <m@bjorling.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Javier González authored
Make LightNVM passhtrough commands fail fast. User space will then take care of re-submitting. Fixes: 84d4add7 ('lightnvm: add ioctls for vector I/Os') Signed-off-by:
-
Javier González authored
The amount of GC I/O on the write buffer is managed by the rate-limiter, which is calculated as a function of the number of available free blocks. When reaching the stable point, we risk having scheduled more I/Os for GC than are allowed on the write buffer. This would result on the GC semaphore balancing the outstanding read GC I/Os to be reported as "hung", though the behavior is normal. Solve this by allowing to schedule when we detect that the read GC path is not moving forward. Signed-off-by:
-
Javier González authored
Cleanup up unused and static functions across the whole codebase. Signed-off-by:
-
Hans Holmberg authored
Lockdep complains about being in atomic context while freeing line metadata - and rightly so as we take a spinlock and end up calling vfree that might sleep(in pblk_mfree). There is no need for holding the line manager free_lock while freeing line metadata as the pipeline as stopped, so remove the lock. Fixes: 588726d3 ("lightnvm: pblk: fail gracefully on irrec. error") Signed-off-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by:
-
Hans Holmberg authored
During garbage collect, lbas being written can end up being invalidated. Make sure that this is reflected in the valid lba count. Signed-off-by:
-
Hans Holmberg authored
Finish garbage collect of the lines that are in the gc pipeline before exiting. Ensure that all lines already in in the pipeline goes through, from read to write. Do this by keeping track of how many lines are in the pipeline and waiting for that number to reach zero before exiting the gc reader task. Since we're adding a new gc line counter, change the name of inflight_gc to read_inflight_gc to make the distinction clear. Signed-off-by:
-
Hans Holmberg authored
Print the CRC of the logical-to-physical mapping during exit and after recovering the L2P table to facilitate detection of meta data corruption/recovery issues. The CRC printed after recovery should match the CRC printed during the previous exit - if it doesn't this indicates that either the meta data written to the disk is corrupt or recovery failed. Signed-off-by:
-
Hans Holmberg authored
Shut down the GC workqueues and tasks in the right order. Signed-off-by:
-
Hans Holmberg authored
When recovering lines we need to consider that bad blocks in a line affect the emeta area size. Previously it was assumed that the emeta area would grow by the number of sectors per page * number of bad blocks in the line. This assumption is not correct - the number of "extra" pages that are consumed could be both smaller (depending on emeta size) and bigger (depending on the placement of the bad blocks). Fix this by calculating the emeta start by iterating backwards through the line, skipping ppas that map to bad blocks. Also fix the data types used for ppa indices/counts in pblk_recov_l2p_from_emeta - we should use u64. Signed-off-by:
-
Hans Holmberg authored
Start GC if needed, directly after init, as we might need to garbage collect in order to make room for user writes. Create a helper function that allows to kick GC without exposing the internals of the GC/rate-limiter interaction. Signed-off-by:
-
Hans Holmberg authored
When rebuilding the L2P table, any full lines (lines without any valid sectors) will be identified. If these lines are not freed, we risk not being able to allocate the first data line. This patch refactors the part of GC that frees empty lines into a separate function and adds a call to this after the L2P table has been rebuilt. Signed-off-by:
-
Hans Holmberg authored
When recovering partially written lines, the valid sector count must be decreased by the number of padded sectors in the line. Update line recovery to take all ADDR_EMPTY(padded) sectors into account. Signed-off-by:
-
Hans Holmberg authored
GC can be kicked after it has been shut down when closing the last line during exit, resulting in accesses to freed structures. Make sure that GC is not triggered while it is not operational. Also make sure that GC won't be re-activated during exit when running on another processor by using timer_del_sync. Signed-off-by:
-
Rakesh Pandit authored
If pblk_core_init fails lets destroy all global caches. Signed-off-by:
Rakesh Pandit <rakesh@tuxera.com> Signed-off-by:
-
Rakesh Pandit authored
We already pass the structure pointer so no need to pass the member. Signed-off-by:
-
Rakesh Pandit authored
Not all exported symbols are being used outside core and there were some stale entries in lightnvm.h Signed-off-by:
-
Rakesh Pandit authored
vblk isn't being used anyway and if we ever have a usecase we can introduce this again. This makes the logic easier and removes unnecessary checks. Signed-off-by:
-
Rakesh Pandit authored
Signed-off-by:
-
Rakesh Pandit authored
pblk_line_gc_list seems to had a bug since the introduction of pblk in getting GC list for a line. In b20ba1bc while redesigning the GC algorithm, the naming for the GC thresholds was altered, but the values for high_thrs and mid_thrs were not. The result is that when moving to the GC lists, the mid threshold is never evaluated. Fixes: a4bd217b("lightnvm: physical block device (pblk) target") Signed-off-by:
-
Javier González authored
Make sure that the variable controlling block threshold for allocating extra metadata sectors in case of a line with bad blocks does not get a negative value. Otherwise, the line will be marked as corrupted and wasted. Signed-off-by:
-
Javier González authored
Metadata I/Os are scheduled to minimize their impact on user data I/Os. When there are enough LUNs instantiated (i.e., enough bandwidth), it is easy to interleave metadata and data one after the other so that metadata I/Os are the ones being blocked and not vice-versa. We do this by calculating the distance between the I/Os in terms of the LUNs that are not in used, and selecting a free LUN that satisfies a the simple heuristic that metadata is scheduled behind. The per-LUN semaphores guarantee consistency. This works fine on >1 LUN configuration. However, when a single LUN is instantiated, this design leads to a deadlock, where metadata waits to be scheduled on a free LUN. This patch implements the 1 LUN case by simply scheduling the metadada I/O after the data I/O. In the process, we refactor the way a line is replaced to ensure that metadata writes are submitted after data writes in order to guarantee block sequentiality. Note that, since there is only one LUN, both I/Os will block each other by design. However, such configuration only pursues tight read latencies, not write bandwidth. Signed-off-by:
-
Javier González authored
pblk schedules user I/O, metadata I/O and erases on the write path in order to minimize collisions at the media level. Until now, there has been a dependency between user and metadata I/Os that could lead to a deadlock as both take the per-LUN semaphore to schedule submission. This path removes this dependency and guarantees forward progress at a per I/O granurality. Signed-off-by:
-
Javier González authored
A partial read I/O in pblk is an I/O where some sectors reside in the write buffer in main memory and some are persisted on the device. Such an I/O must at least contain 2 lbas, therefore checking for the case where a single lba is mapped is not necessary. Signed-off-by:
-
Javier González authored
When a line is recycled during garbage collection, reads can still be issued to the line. If the line is freed in the middle of this process, data corruption might occur. This patch guarantees that lines are not freed in the middle of reads that target them (lines). Specifically, we use the existing line reference to decide when a line is eligible for being freed after the recycle process. Signed-off-by:
-
Javier González authored
As part of pblk's recovery scheme, we store the lba mapped to each physical sector on the device's out-of-bound (OOB) area. On the read path, we can use this information to validate that the data being delivered to the upper layers corresponds to the lba being requested. The cost of this check is an extra copy on the DMA region on the device and an extra comparison in the host, given that (i) the OOB area is being read together with the data in the media, and (ii) the DMA region allocated for the ppa list can be reused for the metadata stored on the OOB area. Signed-off-by:
-
Javier González authored
For consistency with the rest of pblk, use rqd->end_io to point to the function taking care of ending the request on the completion path. Signed-off-by:
-
Javier González authored
Refactor the rqd allocation and free functions so that all I/O types can use these helper functions. Signed-off-by:
-
Javier González authored
Each request type sent to the LightNVM subsystem requires different metadata. Until now, we have tailored this metadata based on write, read and erase commands. However, pblk uses different metadata for internal writes that do not hit the write buffer. Instead of abusing the metadata for reads, create a new request type - internal write to improve code readability. In the process, create internal values for each I/O type instead of abusing the READ/WRITE macros, as suggested by Christoph. Signed-off-by:
-
Javier González authored
Wait until we know the exact number of ppas to be sent to the device, before allocating the bio. Signed-off-by:
-
Javier González authored
On REQ_PREFLUSH, directly tag the I/O context flags to signal a flush in the write to cache path, instead of finding the correct entry context and imposing a memory barrier. This simplifies the code and might potentially prevent race conditions when adding functionality to the write path. Signed-off-by:
-
Javier González authored
Simplify put bio by doing it on bio end_io instead of manually putting it on the completion path. Signed-off-by:
-
Javier González authored
Simplify the part of the garbage collector where data is read from the line being recycled and moved into an internal queue before being copied to the memory buffer. This allows to get rid of a dedicated function, which introduces an unnecessary dependency on the code. Signed-off-by:
-
Javier González authored
When a line is selected for recycling by the garbage collector (GC), the line state changes and the invalid bitmap is frozen, preventing invalidations from happening. Throughout the GC, the L2P map is checked to verify that not data being recycled has been updated. The last check is done before the new map is being stored on the L2P table. Though this algorithm works, it requires a number of corner cases to be checked each time the L2P table is being updated. This complicates readability and is error prone in case that the recycling algorithm is modified. Instead, this patch makes the invalid bitmap accessible even when the line is being recycled. When recycled data is being remapped, it is enough to check the invalid bitmap for the line before updating the L2P table. Signed-off-by:
-
Javier González authored
Refactor lba sanity check on read path to avoid code duplication. Signed-off-by:
-
Javier González authored
Normalize the way we name ppa variables to improve code readability. Signed-off-by:
-
Javier González authored
Use a constant to set the maximum number of inflight GC requests allowed. Signed-off-by:
-
Javier González authored
As part of the mempool audit on pblk, remove unnecessary mempool allocation checks on mempools. Reported-by:
-
Javier González authored
pblk holds two sector bitmaps: one to keep track of the mapped sectors while the line is active and another one to keep track of the invalid sectors. The latter is kept during the whole live of the line, until it is recycled. Since we cannot guarantee forward progress for the mempool in this case, get rid of the mempool and simply allocate memory through kmalloc. Reported-by:
-
Javier González authored
Since read and erase paths offer different guarantees for inflight I/Os, separate the mempools to set the right min_nr for each on creation. Reported-by:
-
