1. 20 Jun, 2018 17 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma · 1abd8a8f
      Linus Torvalds authored
      Pull rdma fixes from Jason Gunthorpe:
       "Here are eight fairly small fixes collected over the last two weeks.
      
        Regression and crashing bug fixes:
      
         - mlx4/5: Fixes for issues found from various checkers
      
         - A resource tracking and uverbs regression in the core code
      
         - qedr: NULL pointer regression found during testing
      
         - rxe: Various small bugs"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
        IB/rxe: Fix missing completion for mem_reg work requests
        RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
        IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
        IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
        RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
        IB/mlx5: Fix return value check in flow_counters_set_data()
        IB/mlx5: Fix memory leak in mlx5_ib_create_flow
        IB/rxe: avoid double kfree skb
      1abd8a8f
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · d8894a08
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.
      
       2) Fix ATM VCC memory accounting, from David Woodhouse.
      
       3) fib6_info objects need RCU freeing, from Eric Dumazet.
      
       4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.
      
       5) Fix clobbered error code in enic_open() failure path, from
          Govindarajulu Varadarajan.
      
       6) Propagate dev_get_valid_name() error returns properly, from Li
          RongQing.
      
       7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.
      
       8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
          Davide Caratti.
      
       9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
        ip: limit use of gso_size to udp
        stmmac: fix DMA channel hang in half-duplex mode
        net: stmmac: socfpga: add additional ocp reset line for Stratix10
        net: sungem: fix rx checksum support
        bpfilter: ignore binary files
        bpfilter: fix build error
        net/usb/drivers: Remove useless hrtimer_active check
        net/sched: act_ife: preserve the action control in case of error
        net/sched: act_ife: fix recursive lock and idr leak
        net: ethernet: fix suspend/resume in davinci_emac
        net: propagate dev_get_valid_name return code
        enic: do not overwrite error code
        net/tcp: Fix socket lookups with SO_BINDTODEVICE
        ptp: replace getnstimeofday64() with ktime_get_real_ts64()
        net/ipv6: respect rcu grace period before freeing fib6_info
        net: net_failover: fix typo in net_failover_slave_register()
        ipvlan: use ETH_MAX_MTU as max mtu
        net: hamradio: use eth_broadcast_addr
        enic: initialize enic->rfs_h.lock in enic_probe
        MAINTAINERS: Add Sam as the maintainer for NCSI
        ...
      d8894a08
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 81e97f01
      Linus Torvalds authored
      Pull HID fixes from Jiri Kosina:
      
       - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke
      
       - fix for hibernation in Intel ISH driver, from Even Xu
      
       - crash fix for hid-steam driver, from Rodrigo Rivas Costa
      
       - new device ID addition to google-hammer driver
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large
        HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation
        HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
        HID: google: Add support for whiskers
      81e97f01
    • Linus Torvalds's avatar
      Merge tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping · 6d90eb7b
      Linus Torvalds authored
      Pull dma-mapping rename from Christoph Hellwig:
       "Move all the dma-mapping code to kernel/dma and lose their dma-*
        prefixes"
      
      * tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
        dma-mapping: move all DMA mapping code to kernel/dma
        dma-mapping: use obj-y instead of lib-y for generic dma ops
      6d90eb7b
    • Jason Gerecke's avatar
      HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large · d471b6b2
      Jason Gerecke authored
      The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains
      a typo which defines an incorrect logical maximum Y value. This causes
      a small portion of the bottom of the tablet to become unusable (both
      because the area is below the "bottom" of the tablet and because
      'wacom_wac_event' ignores out-of-range values). It also results in a
      skewed aspect ratio.
      
      To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites
      the data with the correct value.
      Signed-off-by: default avatarJason Gerecke <jason.gerecke@wacom.com>
      CC: stable@vger.kernel.org # v4.10+
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      d471b6b2
    • Even Xu's avatar
      HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation · ebeaa367
      Even Xu authored
      Current ISH driver only registers suspend/resume PM callbacks which don't
      support hibernation (suspend to disk). Basically after hiberation, the ISH
      can't resume properly and user may not see sensor events (for example: screen
      		rotation may not work).
      
      User will not see a crash or panic or anything except the following message
      in log:
      
      	hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device
      
      So this patch adds support for S4/hiberbation to ISH by using the
      SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend
      and resume functions will now be used for both suspend to RAM and hibernation.
      
      If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend
      and resume related functions won't be used, so mark them as __maybe_unused to
      clarify that this is the intended behavior, and remove #ifdefs for power
      management.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarEven Xu <even.xu@intel.com>
      Acked-by: default avatarSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      ebeaa367
    • Rodrigo Rivas Costa's avatar
      HID: steam: use hid_device.driver_data instead of hid_set_drvdata() · 4bff980f
      Rodrigo Rivas Costa authored
      When creating the low-level hidraw device, the reference to steam_device
      was stored using hid_set_drvdata(). But this value is not guaranteed to
      be kept when set before calling probe. If this pointer is reset, it
      crashes when opening the emulated hidraw device.
      
      It looks like hid_set_drvdata() is for users "avobe" this hid_device,
      while hid_device.driver_data it for users "below" this one.
      
      In this case, we are creating a virtual hidraw device, so we must use
      hid_device.driver_data.
      Signed-off-by: default avatarRodrigo Rivas Costa <rodrigorivascosta@gmail.com>
      Tested-by: default avatarMariusz Ceier <mceier+kernel@gmail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      4bff980f
    • Linus Torvalds's avatar
      proc: fix missing final NUL in get_mm_cmdline() rewrite · f5b65348
      Linus Torvalds authored
      The rewrite of the cmdline fetching missed the fact that we used to also
      return the final terminating NUL character of the last argument.  I
      hadn't noticed, and none of the tools I tested cared, but something
      obviously must care, because Michal Kubecek noticed the change in
      behavior.
      
      Tweak the "find the end" logic to actually include the NUL character,
      and once past the eend of argv, always start the strnlen() at the
      expected (original) argument end.
      
      This whole "allow people to rewrite their arguments in place" is a nasty
      hack and requires that odd slop handling at the end of the argv array,
      but it's our traditional model, so we continue to support it.
      Repored-and-bisected-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Reviewed-and-tested-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Cc: Alexey Dobriyan <adobriyan@gmail.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f5b65348
    • Willem de Bruijn's avatar
      ip: limit use of gso_size to udp · 9887cba1
      Willem de Bruijn authored
      The ipcm(6)_cookie field gso_size is set only in the udp path. The ip
      layer copies this to cork only if sk_type is SOCK_DGRAM. This check
      proved too permissive. Ping and l2tp sockets have the same type.
      
      Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to
      exclude ping sockets.
      
      v1 -> v2
      - remove irrelevant whitespace changes
      
      Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
      Reported-by: default avatarMaciej Żenczykowski <maze@google.com>
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9887cba1
    • Bhadram Varka's avatar
      stmmac: fix DMA channel hang in half-duplex mode · b6cfffa7
      Bhadram Varka authored
      HW does not support Half-duplex mode in multi-queue
      scenario. Fix it by not advertising the Half-Duplex
      mode if multi-queue enabled.
      Signed-off-by: default avatarBhadram Varka <vbhadram@nvidia.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b6cfffa7
    • Dinh Nguyen's avatar
      net: stmmac: socfpga: add additional ocp reset line for Stratix10 · bc8a2d9b
      Dinh Nguyen authored
      The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
      that also needs to get deasserted for the stmmac ethernet controller to work.
      Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
      dwmac-socfpga.
      
      Also, remove the redundant check for the reset controller pointer. The
      reset driver already checks for the pointer and returns 0 if the pointer
      is NULL.
      Signed-off-by: default avatarDinh Nguyen <dinguyen@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bc8a2d9b
    • Eric Dumazet's avatar
      net: sungem: fix rx checksum support · 12b03558
      Eric Dumazet authored
      After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
      are friends"), sungem owners reported the infamous "eth0: hw csum failure"
      message.
      
      CHECKSUM_COMPLETE has in fact never worked for this driver, but this
      was masked by the fact that upper stacks had to strip the FCS, and
      therefore skb->ip_summed was set back to CHECKSUM_NONE before
      my recent change.
      
      Driver configures a number of bytes to skip when the chip computes
      the checksum, and for some reason only half of the Ethernet header
      was skipped.
      
      Then a second problem is that we should strip the FCS by default,
      unless the driver is updated to eventually support NETIF_F_RXFCS in
      the future.
      
      Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
      or not, so that the admin can turn off rx checksum if wanted.
      
      Many thanks to Andreas Schwab and Mathieu Malaterre for their
      help in debugging this issue.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarMeelis Roos <mroos@linux.ee>
      Reported-by: default avatarMathieu Malaterre <malat@debian.org>
      Reported-by: default avatarAndreas Schwab <schwab@linux-m68k.org>
      Tested-by: default avatarAndreas Schwab <schwab@linux-m68k.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12b03558
    • Matteo Croce's avatar
      bpfilter: ignore binary files · 8b26a06a
      Matteo Croce authored
      net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is
      enabled, add it to .gitignore to avoid committing it.
      
      Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
      Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b26a06a
    • Matteo Croce's avatar
      bpfilter: fix build error · 421780fd
      Matteo Croce authored
      bpfilter Makefile assumes that the system locale is en_US, and the
      parsing of objdump output fails.
      Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns
      only 2 processes instead of 7.
      
      Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
      Signed-off-by: default avatarMatteo Croce <mcroce@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      421780fd
    • Daniel Lezcano's avatar
      net/usb/drivers: Remove useless hrtimer_active check · 2aee167c
      Daniel Lezcano authored
      The code does:
      
       if (hrtimer_active(&t))
          hrtimer_cancel(&t);
      
      However, hrtimer_cancel() checks if the timer is active, so the
      test above is pointless.
      Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2aee167c
    • Davide Caratti's avatar
      net/sched: act_ife: preserve the action control in case of error · cbf56c29
      Davide Caratti authored
      in the following script
      
       # tc actions add action ife encode allow prio pass index 42
       # tc actions replace action ife encode allow tcindex drop index 42
      
      the action control should remain equal to 'pass', if the kernel failed
      to replace the TC action. Pospone the assignment of the action control,
      to ensure it is not overwritten in the error path of tcf_ife_init().
      
      Fixes: ef6980b6 ("introduce IFE action")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cbf56c29
    • Davide Caratti's avatar
      net/sched: act_ife: fix recursive lock and idr leak · 0a889b94
      Davide Caratti authored
      a recursive lock warning [1] can be observed with the following script,
      
       # $TC actions add action ife encode allow prio pass index 42
       IFE type 0xED3E
       # $TC actions replace action ife encode allow tcindex pass index 42
      
      in case the kernel was unable to run the last command (e.g. because of
      the impossibility to load 'act_meta_skbtcindex'). For a similar reason,
      the kernel can leak idr in the error path of tcf_ife_init(), because
      tcf_idr_release() is not called after successful idr reservation:
      
       # $TC actions add action ife encode allow tcindex index 47
       IFE type 0xED3E
       RTNETLINK answers: No such file or directory
       We have an error talking to the kernel
       # $TC actions add action ife encode allow tcindex index 47
       IFE type 0xED3E
       RTNETLINK answers: No space left on device
       We have an error talking to the kernel
       # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47
       IFE type 0xFEFE
       RTNETLINK answers: No space left on device
       We have an error talking to the kernel
      
      Since tcfa_lock is already taken when the action is being edited, a call
      to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock
      again. On the other hand, tcf_idr_release() needs to be called in the
      error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation.
      Fix both problems in tcf_ife_init().
      Since the cleanup() routine can now be called when ife->params is NULL,
      also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu).
      
       [1]
       ============================================
       WARNING: possible recursive locking detected
       4.17.0-rc4.kasan+ #417 Tainted: G            E
       --------------------------------------------
       tc/3932 is trying to acquire lock:
       000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife]
      
       but task is already holding lock:
       000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]
      
       other info that might help us debug this:
        Possible unsafe locking scenario:
      
              CPU0
              ----
         lock(&(&p->tcfa_lock)->rlock);
         lock(&(&p->tcfa_lock)->rlock);
      
        *** DEADLOCK ***
      
        May be due to missing lock nesting notation
      
       2 locks held by tc/3932:
        #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife]
        #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife]
      
       stack backtrace:
       CPU: 3 PID: 3932 Comm: tc Tainted: G            E     4.17.0-rc4.kasan+ #417
       Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
       Call Trace:
        dump_stack+0x9a/0xeb
        __lock_acquire+0xf43/0x34a0
        ? debug_check_no_locks_freed+0x2b0/0x2b0
        ? debug_check_no_locks_freed+0x2b0/0x2b0
        ? debug_check_no_locks_freed+0x2b0/0x2b0
        ? __mutex_lock+0x62f/0x1240
        ? kvm_sched_clock_read+0x1a/0x30
        ? sched_clock+0x5/0x10
        ? sched_clock_cpu+0x18/0x170
        ? find_held_lock+0x39/0x1d0
        ? lock_acquire+0x10b/0x330
        lock_acquire+0x10b/0x330
        ? tcf_ife_cleanup+0x19/0x80 [act_ife]
        _raw_spin_lock_bh+0x38/0x70
        ? tcf_ife_cleanup+0x19/0x80 [act_ife]
        tcf_ife_cleanup+0x19/0x80 [act_ife]
        __tcf_idr_release+0xff/0x350
        tcf_ife_init+0xdde/0x13c0 [act_ife]
        ? ife_exit_net+0x290/0x290 [act_ife]
        ? __lock_is_held+0xb4/0x140
        tcf_action_init_1+0x67b/0xad0
        ? tcf_action_dump_old+0xa0/0xa0
        ? sched_clock+0x5/0x10
        ? sched_clock_cpu+0x18/0x170
        ? kvm_sched_clock_read+0x1a/0x30
        ? sched_clock+0x5/0x10
        ? sched_clock_cpu+0x18/0x170
        ? memset+0x1f/0x40
        tcf_action_init+0x30f/0x590
        ? tcf_action_init_1+0xad0/0xad0
        ? memset+0x1f/0x40
        tc_ctl_action+0x48e/0x5e0
        ? mutex_lock_io_nested+0x1160/0x1160
        ? tca_action_gd+0x990/0x990
        ? sched_clock+0x5/0x10
        ? find_held_lock+0x39/0x1d0
        rtnetlink_rcv_msg+0x4da/0x990
        ? validate_linkmsg+0x680/0x680
        ? sched_clock_cpu+0x18/0x170
        ? find_held_lock+0x39/0x1d0
        netlink_rcv_skb+0x127/0x350
        ? validate_linkmsg+0x680/0x680
        ? netlink_ack+0x970/0x970
        ? __kmalloc_node_track_caller+0x304/0x3a0
        netlink_unicast+0x40f/0x5d0
        ? netlink_attachskb+0x580/0x580
        ? _copy_from_iter_full+0x187/0x760
        ? import_iovec+0x90/0x390
        netlink_sendmsg+0x67f/0xb50
        ? netlink_unicast+0x5d0/0x5d0
        ? copy_msghdr_from_user+0x206/0x340
        ? netlink_unicast+0x5d0/0x5d0
        sock_sendmsg+0xb3/0xf0
        ___sys_sendmsg+0x60a/0x8b0
        ? copy_msghdr_from_user+0x340/0x340
        ? lock_downgrade+0x5e0/0x5e0
        ? tty_write_lock+0x18/0x50
        ? kvm_sched_clock_read+0x1a/0x30
        ? sched_clock+0x5/0x10
        ? sched_clock_cpu+0x18/0x170
        ? find_held_lock+0x39/0x1d0
        ? lock_downgrade+0x5e0/0x5e0
        ? lock_acquire+0x10b/0x330
        ? __audit_syscall_entry+0x316/0x690
        ? current_kernel_time64+0x6b/0xd0
        ? __fget_light+0x55/0x1f0
        ? __sys_sendmsg+0xd2/0x170
        __sys_sendmsg+0xd2/0x170
        ? __ia32_sys_shutdown+0x70/0x70
        ? syscall_trace_enter+0x57a/0xd60
        ? rcu_read_lock_sched_held+0xdc/0x110
        ? __bpf_trace_sys_enter+0x10/0x10
        ? do_syscall_64+0x22/0x480
        do_syscall_64+0xa5/0x480
        entry_SYSCALL_64_after_hwframe+0x49/0xbe
       RIP: 0033:0x7fd646988ba0
       RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
       RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0
       RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003
       RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000
       R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000
       R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100
      
      Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding")
      Fixes: ef6980b6 ("introduce IFE action")
      Signed-off-by: default avatarDavide Caratti <dcaratti@redhat.com>
      Acked-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0a889b94
  2. 19 Jun, 2018 20 commits
    • Bartosz Golaszewski's avatar
      net: ethernet: fix suspend/resume in davinci_emac · dc45519e
      Bartosz Golaszewski authored
      This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac:
      Deduplicate bus_find_device() by name matching") and adds a comment
      which should stop anyone from reintroducing the same "fix" in the future.
      
      We can't use bus_find_device_by_name() here because the device name is
      not guaranteed to be 'davinci_mdio'. On some systems it can be
      'davinci_mdio.0' so we need to use strncmp() against the first part of
      the string to correctly match it.
      
      Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBartosz Golaszewski <bgolaszewski@baylibre.com>
      Acked-by: default avatarLukas Wunner <lukas@wunner.de>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dc45519e
    • Li RongQing's avatar
      net: propagate dev_get_valid_name return code · 7892bd08
      Li RongQing authored
      if dev_get_valid_name failed, propagate its return code
      
      and remove the setting err to ENODEV, it will be set to
      0 again before dev_change_net_namespace exits.
      Signed-off-by: default avatarLi RongQing <lirongqing@baidu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7892bd08
    • Govindarajulu Varadarajan's avatar
      enic: do not overwrite error code · 56f77227
      Govindarajulu Varadarajan authored
      In failure path, we overwrite err to what vnic_rq_disable() returns. In
      case it returns 0, enic_open() returns success in case of error.
      Reported-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Fixes: e8588e26 ("enic: enable rq before updating rq descriptors")
      Signed-off-by: default avatarGovindarajulu Varadarajan <gvaradar@cisco.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      56f77227
    • David Ahern's avatar
      net/tcp: Fix socket lookups with SO_BINDTODEVICE · 8c43bd17
      David Ahern authored
      Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups
      need to fail if dev_match is not true. Currently, a packet to a given port
      can match a socket bound to device when it should not. In the VRF case,
      this causes the lookup to hit a VRF socket and not a global socket
      resulting in a response trying to go through the VRF when it should not.
      
      Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups")
      Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups")
      Reported-by: default avatarLou Berger <lberger@labn.net>
      Diagnosed-by: default avatarRenato Westphal <renato@opensourcerouting.org>
      Tested-by: default avatarRenato Westphal <renato@opensourcerouting.org>
      Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8c43bd17
    • Arnd Bergmann's avatar
      ptp: replace getnstimeofday64() with ktime_get_real_ts64() · f696a21c
      Arnd Bergmann authored
      getnstimeofday64() is deprecated and getting replaced throughout
      the kernel with ktime_get_*() based helpers for a more consistent
      interface.
      
      The two functions do the exact same thing, so this is just
      a cosmetic change.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f696a21c
    • Eric Dumazet's avatar
      net/ipv6: respect rcu grace period before freeing fib6_info · 9b0a8da8
      Eric Dumazet authored
      syzbot reported use after free that is caused by fib6_info being
      freed without a proper RCU grace period.
      
      CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      Call Trace:
       <IRQ>
       __dump_stack lib/dump_stack.c:77 [inline]
       dump_stack+0x1b9/0x294 lib/dump_stack.c:113
       print_address_description+0x6c/0x20b mm/kasan/report.c:256
       kasan_report_error mm/kasan/report.c:354 [inline]
       kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
       __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
       __read_once_size include/linux/compiler.h:188 [inline]
       find_rr_leaf net/ipv6/route.c:705 [inline]
       rt6_select net/ipv6/route.c:761 [inline]
       fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823
       ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856
       ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082
       fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122
       ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110
       ip6_route_output include/net/ip6_route.h:82 [inline]
       icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline]
       icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535
       icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43
       ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244
       dst_link_failure include/net/dst.h:427 [inline]
       ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695
       neigh_invalidate+0x246/0x550 net/core/neighbour.c:892
       neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978
       call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
       expire_timers kernel/time/timer.c:1363 [inline]
       __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
       run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
       __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284
       invoke_softirq kernel/softirq.c:364 [inline]
       irq_exit+0x1d1/0x200 kernel/softirq.c:404
       exiting_irq arch/x86/include/asm/apic.h:527 [inline]
       smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
       apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
       </IRQ>
      RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482
      Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48
      RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
      RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000
      RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0
      RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000
      R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0
      R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00
       strlen include/linux/string.h:267 [inline]
       getname_kernel+0x24/0x370 fs/namei.c:218
       open_exec+0x17/0x70 fs/exec.c:882
       load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780
       search_binary_handler+0x17d/0x570 fs/exec.c:1653
       exec_binprm fs/exec.c:1695 [inline]
       __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819
       do_execveat_common fs/exec.c:1866 [inline]
       do_execve fs/exec.c:1883 [inline]
       __do_sys_execve fs/exec.c:1964 [inline]
       __se_sys_execve fs/exec.c:1959 [inline]
       __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959
       do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      RIP: 0033:0x7f1576a46207
      Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02
      RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
      RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207
      RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670
      RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c
      R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10
      R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005
      
      Allocated by task 12188:
       save_stack+0x43/0xd0 mm/kasan/kasan.c:448
       set_track mm/kasan/kasan.c:460 [inline]
       kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
       kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
       kmalloc include/linux/slab.h:513 [inline]
       kzalloc include/linux/slab.h:706 [inline]
       fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152
       ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013
       ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154
       ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660
       inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
       sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
       sock_ioctl+0x30d/0x680 net/socket.c:1097
       vfs_ioctl fs/ioctl.c:46 [inline]
       file_ioctl fs/ioctl.c:500 [inline]
       do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
       ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
       __do_sys_ioctl fs/ioctl.c:708 [inline]
       __se_sys_ioctl fs/ioctl.c:706 [inline]
       __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
       do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Freed by task 1402:
       save_stack+0x43/0xd0 mm/kasan/kasan.c:448
       set_track mm/kasan/kasan.c:460 [inline]
       __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
       kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
       __cache_free mm/slab.c:3498 [inline]
       kfree+0xd9/0x260 mm/slab.c:3813
       fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207
       fib6_info_release include/net/ip6_fib.h:286 [inline]
       __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline]
       ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316
       ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663
       inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546
       sock_do_ioctl+0xe4/0x3e0 net/socket.c:973
       sock_ioctl+0x30d/0x680 net/socket.c:1097
       vfs_ioctl fs/ioctl.c:46 [inline]
       file_ioctl fs/ioctl.c:500 [inline]
       do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684
       ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
       __do_sys_ioctl fs/ioctl.c:708 [inline]
       __se_sys_ioctl fs/ioctl.c:706 [inline]
       __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706
       do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      The buggy address belongs to the object at ffff8801b5df2580
       which belongs to the cache kmalloc-256 of size 256
      The buggy address is located 8 bytes inside of
       256-byte region [ffff8801b5df2580, ffff8801b5df2680)
      The buggy address belongs to the page:
      page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40
      flags: 0x2fffc0000000100(slab)
      raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0
      raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000
      page dumped because: kasan: bad access detected
      
      Memory state around the buggy address:
       ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
       ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
      > ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
       ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
       ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
      
      Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Cc: David Ahern <dsahern@gmail.com>
      Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com
      Acked-by: default avatarDavid Ahern <dsahern@gmail.com>
      Tested-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b0a8da8
    • Liran Alon's avatar
      net: net_failover: fix typo in net_failover_slave_register() · e5223438
      Liran Alon authored
      Sync both unicast and multicast lists instead of unicast twice.
      
      Fixes: cfc80d9a ("net: Introduce net_failover driver")
      Reviewed-by: default avatarJoao Martins <joao.m.martins@oracle.com>
      Signed-off-by: default avatarLiran Alon <liran.alon@oracle.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e5223438
    • Xin Long's avatar
      ipvlan: use ETH_MAX_MTU as max mtu · 548feb33
      Xin Long authored
      Similar to the fixes on team and bonding, this restores the ability
      to set an ipvlan device's mtu to anything higher than 1500.
      
      Fixes: 91572088 ("net: use core MTU range checking in core net infra")
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      548feb33
    • Stefan Agner's avatar
      net: hamradio: use eth_broadcast_addr · 4e8439aa
      Stefan Agner authored
      The array bpq_eth_addr is only used to get the size of an
      address, whereas the bcast_addr is used to set the broadcast
      address. This leads to a warning when using clang:
      drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not
            needed and will not be emitted [-Wunneeded-internal-declaration]
      static char bpq_eth_addr[6];
                  ^
      
      Remove both variables and use the common eth_broadcast_addr
      to set the broadcast address.
      Signed-off-by: default avatarStefan Agner <stefan@agner.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e8439aa
    • Govindarajulu Varadarajan's avatar
      enic: initialize enic->rfs_h.lock in enic_probe · 3256d29f
      Govindarajulu Varadarajan authored
      lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without
      initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops
      can be called when interface is down.
      
      Move enic_rfs_flw_tbl_init to enic_probe.
      
      INFO: trying to register non-static key.
      the code is fine but needs lockdep annotation.
      turning off the locking correctness validator.
      CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
      Call Trace:
      dump_stack+0x85/0xc0
      register_lock_class+0x550/0x560
      ? __handle_mm_fault+0xa8b/0x1100
      __lock_acquire+0x81/0x670
      lock_acquire+0xb9/0x1e0
      ?  enic_get_rxnfc+0x139/0x2b0 [enic]
      _raw_spin_lock_bh+0x38/0x80
      ? enic_get_rxnfc+0x139/0x2b0 [enic]
      enic_get_rxnfc+0x139/0x2b0 [enic]
      ethtool_get_rxnfc+0x8d/0x1c0
      dev_ethtool+0x16c8/0x2400
      ? __mutex_lock+0x64d/0xa00
      ? dev_load+0x6a/0x150
      dev_ioctl+0x253/0x4b0
      sock_do_ioctl+0x9a/0x130
      sock_ioctl+0x1af/0x350
      do_vfs_ioctl+0x8e/0x670
      ? syscall_trace_enter+0x1e2/0x380
      ksys_ioctl+0x60/0x90
      __x64_sys_ioctl+0x16/0x20
      do_syscall_64+0x5a/0x170
      entry_SYSCALL_64_after_hwframe+0x49/0xbe
      Signed-off-by: default avatarGovindarajulu Varadarajan <gvaradar@cisco.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3256d29f
    • David S. Miller's avatar
      Merge branch 'NCSI-silence-warning-messages' · d1a65e21
      David S. Miller authored
      Joel Stanley says:
      
      ====================
      Slience NCSI logging
      
      v2:
        Fix indent issue and commit message based on Joe's feedback
        Add Sam's acks
      
      Here are three changes to silence unnecessary warnings in the ncsi code.
      
      The final patch adds Sam as the maintainer for NCSI.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d1a65e21
    • Joel Stanley's avatar
      MAINTAINERS: Add Sam as the maintainer for NCSI · 01a21986
      Joel Stanley authored
      Sam has been handing the maintenance of NCSI for a number release cycles
      now.
      Acked-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      01a21986
    • Joel Stanley's avatar
      net/ncsi: Use netdev_dbg for debug messages · 6e42a3f5
      Joel Stanley authored
      This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
      netdev_dbg.
      
      As Joe explains:
      
      > netdev_dbg is not included in object code unless
      > DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
      > And then, it is not emitted into the log unless
      > DEBUG is set or this specific netdev_dbg is enabled
      > via the dynamic debug control file.
      
      Which is what we're after in this case.
      Acked-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6e42a3f5
    • Joel Stanley's avatar
      net/ncsi: Drop no more channels message · 5d3b1467
      Joel Stanley authored
      This does not provide useful information. As the ncsi maintainer said:
      
       > either we get a channel or broadcom has gone out to lunch
      Acked-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5d3b1467
    • Joel Stanley's avatar
      net/ncsi: Silence debug messages · 87975a01
      Joel Stanley authored
      In normal operation we see this series of messages as the host drives
      the network device:
      
       ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
       ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
       ftgmac100 1e660000.ethernet eth0: NCSI interface down
       ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
       ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI interface up
       ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
       ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
       ftgmac100 1e660000.ethernet eth0: NCSI interface down
       ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
       ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
       ftgmac100 1e660000.ethernet eth0: NCSI interface up
      
      This makes all of these messages netdev_dbg. They are still useful to
      debug eg. misbehaving network device firmware, but we do not need them
      filling up the kernel logs in normal operation.
      Acked-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
      Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      87975a01
    • Daniel Borkmann's avatar
      bpf, xdp, i40e: fix i40e_build_skb skb reserve and truesize · c51818d5
      Daniel Borkmann authored
      Using skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start))
      is clearly wrong since I40E_SKB_PAD already points to the offset where
      the original xdp->data was sitting since xdp->data_hard_start is defined
      as xdp->data - i40e_rx_offset(rx_ring) where latter offsets to I40E_SKB_PAD
      when build skb is used.
      
      However, also before cc5b114d ("bpf, i40e: add meta data support")
      this seems broken since bpf_xdp_adjust_head() helper could have been used
      to alter headroom and enlarge / shrink the frame and with that the assumption
      that the xdp->data remains unchanged does not hold and would push a bogus
      packet to upper stack.
      
      ixgbe got this right in 92470808 ("ixgbe: add XDP support for pass and
      drop actions"). In any case, fix it by removing the I40E_SKB_PAD from both
      skb_reserve() and truesize calculation.
      
      Fixes: cc5b114d ("bpf, i40e: add meta data support")
      Fixes: 0c8493d9 ("i40e: add XDP support for pass and drop actions")
      Reported-by: default avatarKeith Busch <keith.busch@linux.intel.com>
      Reported-by: default avatarToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Cc: Björn Töpel <bjorn.topel@intel.com>
      Cc: John Fastabend <john.fastabend@gmail.com>
      Tested-by: default avatarKeith Busch <keith.busch@linux.intel.com>
      Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
      Acked-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c51818d5
    • David S. Miller's avatar
      Merge branch 'qed-fixes' · d563e7a2
      David S. Miller authored
      Sudarsana Reddy Kalluru says:
      
      ====================
      qed*: Fix series.
      
      The patch series fixes few issues in the qed/qede drivers.
      Please consider applying this series to "net".
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d563e7a2
    • Sudarsana Reddy Kalluru's avatar
      qed: Do not advertise DCBX_LLD_MANAGED capability. · ff54d5cd
      Sudarsana Reddy Kalluru authored
      Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow
      external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent
      for qed* devices, and no other lldp agent is allowed to coexist with mfw.
      
      Also updated a debug print, to not to display the redundant info.
      
      Fixes: a1d8d8a5 ("qed: Add dcbnl support.")
      Signed-off-by: default avatarSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
      Signed-off-by: default avatarAriel Elior <ariel.elior@cavium.com>
      Signed-off-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ff54d5cd
    • Sudarsana Reddy Kalluru's avatar
      qed: Add sanity check for SIMD fastpath handler. · 3935a709
      Sudarsana Reddy Kalluru authored
      Avoid calling a SIMD fastpath handler if it is NULL. The check is needed
      to handle an unlikely scenario where unsolicited interrupt is destined to
      a PF in INTa mode.
      
      Fixes: fe56b9e6 ("qed: Add module with basic common support")
      Signed-off-by: default avatarSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
      Signed-off-by: default avatarAriel Elior <ariel.elior@cavium.com>
      Signed-off-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3935a709
    • Sudarsana Reddy Kalluru's avatar
      qed: Fix possible memory leak in Rx error path handling. · 4f9de4df
      Sudarsana Reddy Kalluru authored
      Memory for packet buffers need to be freed in the error paths as there is
      no consumer (e.g., upper layer) for such packets and that memory will never
      get freed.
      The issue was uncovered when port was attacked with flood of isatap
      packets, these are multicast packets hence were directed at all the PFs.
      For foce PF, this meant they were routed to the ll2 module which in turn
      drops such packets.
      
      Fixes: 0a7fb11c ("qed: Add Light L2 support")
      Signed-off-by: default avatarSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
      Signed-off-by: default avatarAriel Elior <ariel.elior@cavium.com>
      Signed-off-by: default avatarMichal Kalderon <Michal.Kalderon@cavium.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f9de4df
  3. 18 Jun, 2018 3 commits
    • Linus Torvalds's avatar
      Merge tag 'jfs-4.18' of git://github.com/kleikamp/linux-shaggy · ba4dbded
      Linus Torvalds authored
      Pull jfs fix from Dave Kleikamp:
       "This fixes a too-small allocation in the xattr code"
      
      * tag 'jfs-4.18' of git://github.com/kleikamp/linux-shaggy:
        jfs: Fix inconsistency between memory allocation and ea_buf->max_size
      ba4dbded
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux · c0d1a7eb
      Linus Torvalds authored
      Pull s390 updates from Martin Schwidefsky:
       "common I/O layer
         - Fix bit-fields crossing storage-unit boundaries in css_general_char
      
        dasd driver
         - Avoid a sparse warning in regard to the queue lock
         - Allocate the struct dasd_ccw_req as per request data. Only for
           internal I/O is the structure allocated separately
         - Remove the unused function dasd_kmalloc_set_cda
         - Save a few bytes in struct dasd_ccw_req by reordering fields
         - Convert remaining users of dasd_kmalloc_request to
           dasd_smalloc_request and remove the now unused function
      
        vfio/ccw
         - Refactor and improve pfn_array_alloc_pin/pfn_array_pin
         - Add a new tracepoint for failed vfio/ccw requests
         - Add a CCW translation improvement to accept more requests as valid
         - Bug fixes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
        s390/dasd: only use preallocated requests
        s390/dasd: reshuffle struct dasd_ccw_req
        s390/dasd: remove dasd_kmalloc_set_cda
        s390/dasd: move dasd_ccw_req to per request data
        s390/dasd: simplify locking in process_final_queue
        s390/cio: sanitize css_general_characteristics definition
        vfio: ccw: add tracepoints for interesting error paths
        vfio: ccw: set ccw->cda to NULL defensively
        vfio: ccw: refactor and improve pfn_array_alloc_pin()
        vfio: ccw: shorten kernel doc description for pfn_array_pin()
        vfio: ccw: push down unsupported IDA check
        vfio: ccw: fix error return in vfio_ccw_sch_event
        s390/archrandom: Rework arch random implementation.
        s390/net: add pnetid support
      c0d1a7eb
    • Andrew Morton's avatar
      revert "mm/memblock: add missing include <linux/bootmem.h>" · 6cc22dc0
      Andrew Morton authored
      The patch fixed a W=1 warning but broke the ia64 build:
      
          CC      mm/memblock.o
        mm/memblock.c:1340: error: redefinition of `memblock_virt_alloc_try_nid_raw'
        ./include/linux/bootmem.h:335: error: previous definition of `memblock_virt_alloc_try_nid_raw' was here
      
      Because inlcude/linux/bootmem.h says
      
      	#if defined(CONFIG_HAVE_MEMBLOCK) && defined(CONFIG_NO_BOOTMEM)
      
      whereas mm/Makefile says
      
      	obj-$(CONFIG_HAVE_MEMBLOCK) += memblock.o
      
      So revert 26f09e9b ("mm/memblock: add missing include
      <linux/bootmem.h>") while a full fix can be worked on.
      
      Fixes: 26f09e9b ("mm/memblock: add missing include <linux/bootmem.h>")
      Reported-by: default avatarTony Luck <tony.luck@gmail.com>
      Cc: Mathieu Malaterre <malat@debian.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6cc22dc0