- 09 Mar, 2017 6 commits
-
-
NeilBrown authored
These arrays, created with "mdadm --build" don't benefit from a limit. The default will be used, which is '0' and is interpreted as "don't impose a limit". Reported-by: ian_bruce@mail.ru Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
-
Guoqing Jiang authored
raid1_resize and raid5_resize should also check the mddev->queue if run underneath dm-raid. And both set_capacity and revalidate_disk are used in pers->resize such as raid1, raid10 and raid5. So move them from personality file to common code. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
-
Guoqing Jiang authored
This memset is not needed. The lvb is already zeroed because it was recently allocated by lockres_init, which uses kzalloc(), and read_resync_info() doesn't need it to be zero anyway. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
-
Guoqing Jiang authored
To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
-
Shaohua Li authored
Nobody is using mddev_check_plugged(), so delete the dead code Signed-off-by: Shaohua Li <shli@fb.com>
-
Shaohua Li authored
Commit 57c67df4(md/raid10: submit IO from originating thread instead of md thread) submits bio directly for normal disks but not for replacement disks. There is no point we shouldn't do this for replacement disks. Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
-
- 08 Mar, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull sched.h split-up fixes for MIPS from Ingo Molnar: "These are the fixes for MIPS build failures due to the sched.h split-up, from Arnd Bergmann" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MIPS: Add missing include files
-
Tony Luck authored
Commit 13ad59df ("mm, page_alloc: avoid page_to_pfn() when merging buddies") moved the check for memory holes out of page_is_buddy() and had the callers do the check. But this wasn't done correctly in one place which caused ia64 to crash very early in boot. Update to fix that and make ia64 boot again. [ v2: Vlastimil pointed out we don't need to call page_to_pfn() since we already have the result of that in "buddy_pfn" ] Fixes: 13ad59df ("avoid page_to_pfn() when merging buddies") Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest fixes from Steven Rostedt: "Greg Kroah-Hartman reported to me that the ktest of v4.11-rc1 locked up in an infinite loop while doing the make mrproper. Looking into the cause I noticed that a recent update to the function run_command (used for running all shell commands, including "make mrproper") changed the internal loop to use the function wait_for_input. The wait_for_input function uses select to look at two file descriptors. One is the file descriptor of the command it is running, the other is STDIN. The STDIN check was not checking the return status of the sysread call, and was also just writing a lot of data into syswrite without regard to the size of the data read. Changing the code to check the return status of sysread, and also to still process the passed in descriptor data without looping back to the select fixed Greg's problem. While looking at this code I also realized that the loop did not honor the timeout if STDIN always had input (or for some reason return error). this could prevent wait_for_input to timeout on the file descriptor it is suppose to be waiting for. That is fixed too" * tag 'ktest-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Make sure wait_for_input does honor the timeout ktest: Fix while loop in wait_for_input
-
Linus Torvalds authored
This removes the extra include header file that was added in commit e58bc927 "Pull overlayfs updates from Miklos Szeredi" now that it is no longer needed. There are probably other such includes that got added during the scheduler header splitup series, but this is the one that annoyed me personally and I know about. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The scheduler header file split and cleanups ended up exposing a few nasty header file dependencies, and in particular it showed how we in <linux/wait.h> ended up depending on "signal_pending()", which now comes from <linux/sched/signal.h>. That's a very subtle and annoying dependency, which already caused a semantic merge conflict (see commit e58bc927 "Pull overlayfs updates from Miklos Szeredi", which added that fixup in the merge commit). It turns out that we can avoid this dependency _and_ improve code generation by moving the guts of the fairly nasty helper #define __wait_event_interruptible_locked() to out-of-line code. The code that includes the signal_pending() check is all in the slow-path where we actually go to sleep waiting for the event anyway, so using a helper function is the right thing to do. Using a helper function is also what we already did for the non-locked versions, see the "__wait_event*()" macros and the "prepare_to_wait*()" set of helper functions. We might want to try to unify all these macro games, we have a _lot_ of subtly different wait-event loops. But this is the minimal patch to fix the annoying header dependency. Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Steven Rostedt (VMware) authored
The function wait_for_input takes in a timeout, and even has a default timeout. But if for some reason the STDIN descriptor keeps sending in data, the function will never time out. The timout is to wait for the data from the passed in file descriptor, not for STDIN. Adding a test in the case where there's no data from the passed in file descriptor that checks to see if the timeout passed, will ensure that it will timeout properly even if there's input in STDIN. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The run_command function was changed to use the wait_for_input function to allow having a timeout if the command to run takes too much time. There was a bug in the wait_for_input where it could end up going into an infinite loop. There's two issues here. One is that the return value of the sysread wasn't used for the write (to write a proper size), and that it should continue processing the passed in file descriptor too even if there was input. There was no check for error, if for some reason STDIN returned an error, the function would go into an infinite loop and never exit. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 6e98d1b4 ("ktest: Add timeout to ssh command") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Arnd Bergmann authored
After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb1 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.deSigned-off-by: Ingo Molnar <mingo@kernel.org>
-
- 07 Mar, 2017 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes and minor updates all over the place: - an SGI/UV fix - a defconfig update - a build warning fix - move the boot_params file to the arch location in debugfs - a pkeys fix - selftests fix - boot message fixes - sparse fixes - a resume warning fix - ioapic hotplug fixes - reboot quirks ... plus various minor cleanups" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build/x86_64_defconfig: Enable CONFIG_R8169 x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk x86/hpet: Prevent might sleep splat on resume x86/boot: Correct setup_header.start_sys name x86/purgatory: Fix sparse warning, symbol not declared x86/purgatory: Make functions and variables static x86/events: Remove last remnants of old filenames x86/pkeys: Check against max pkey to avoid overflows x86/ioapic: Split IOAPIC hot-removal into two steps x86/PCI: Implement pcibios_release_device to release IRQ from IOAPIC x86/intel_rdt: Remove duplicate inclusion of linux/cpu.h x86/vmware: Remove duplicate inclusion of asm/timer.h x86/hyperv: Hide unused label x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk x86/platform/uv/BAU: Fix HUB errors by remove initial write to sw-ack register x86/selftests: Add clobbers for int80 on x86_64 x86/apic: Simplify enable_IR_x2apic(), remove try_to_enable_IR() x86/apic: Fix a warning message in logical CPU IDs allocation x86/kdebugfs: Move boot params hierarchy under (debugfs)/x86/
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Ingo Molnar: "This includes a fix for lockups caused by incorrect nsecs related cleanup, and a capabilities check fix for timerfd" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: jiffies: Revert bogus conversion of NSEC_PER_SEC to TICK_NSEC timerfd: Only check CAP_WAKE_ALARM when it is needed
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "A fix for KVM's scheduler clock which (erroneously) was always marked unstable, a fix for RT/DL load balancing, plus latency fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/clock, x86/tsc: Rework the x86 'unstable' sched_clock() interface sched/core: Fix pick_next_task() for RT,DL sched/fair: Make select_idle_cpu() more aggressive
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "This includes a fix for a crash if certain special addresses are kprobed, plus does a rename of two Kconfig variables that were a minor misnomer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Rename CONFIG_[UK]PROBE_EVENT to CONFIG_[UK]PROBE_EVENTS kprobes/x86: Fix kernel panic when certain exception-handling addresses are probed
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: - Change the new refcount_t warnings from WARN() to WARN_ONCE() - two ww_mutex fixes - plus a new lockdep self-consistency check for a bug that triggered in practice * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/ww_mutex: Adjust the lock number for stress test locking/lockdep: Add nest_lock integrity test locking/ww_mutex: Replace cpu_relax() with cond_resched() for tests locking/refcounts: Change WARN() to WARN_ONCE()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull IRQ fix from Ingo Molnar: "Fix an ARM TI DRA7XX SoC irqchip driver local variables type bug/warning" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/crossbar: Fix incorrect type of local variables
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Ingo Molnar: "A boot crash fix, and a secure boot related boot messages fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm: Fix boot crash with CONFIG_CPUMASK_OFFSTACK=y efi/libstub: Treat missing SecureBoot variable as Secure Boot disabled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "A couple of sched.h splitup related build fixes, plus an objtool fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix another GCC jump table detection issue drivers/char/nwbutton: Fix build breakage caused by include file reshuffling h8300: Fix build breakage caused by header file changes avr32: Fix build error caused by include file reshuffling
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull idr fix (and new tests) from Matthew Wilcox: "One urgent patch in here; freeing the correct IDA bitmap. Everything else is changes to the test suite" * 'idr-4.11' of git://git.infradead.org/users/willy/linux-dax: radix tree test suite: Specify -m32 in LDFLAGS too ida: Free correct IDA bitmap radix tree test suite: Depend on Makefile and quieten grep radix tree test suite: Fix build with --as-needed radix tree test suite: Build 32 bit binaries radix tree test suite: Add performance test for radix_tree_join() radix tree test suite: Add performance test for radix_tree_split() radix tree test suite: Add performance benchmarks radix tree test suite: Add test for radix_tree_clear_tags() radix tree test suite: Add tests for ida_simple_get() and ida_simple_remove() radix tree test suite: Add test for idr_get_next()
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Five fairly small fixes for things that went in this cycle. A fairly large patch to rework the CAS logic on Power9, necessitated by a late change to the firmware API, and we can't boot without it. Three fixes going to stable, allowing more instructions to be emulated on LE, fixing a boot crash on 32-bit Freescale BookE machines, and the OPAL XICS workaround. And a patch from me to sort the selects under CONFIG PPC. Annoying churn, but worth it in the long run, and best for it to go in now to avoid conflicts. Thanks to: Alexey Kardashevskiy, Anton Blanchard, Balbir Singh, Gautham R. Shenoy, Laurentiu Tudor, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Sachin Sant, Shile Zhang, Suraj Jitindar Singh" * tag 'powerpc-4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Sort the selects under CONFIG_PPC powerpc/64: Fix L1D cache shape vector reporting L1I values powerpc/64: Avoid panic during boot due to divide by zero in init_cache_info() powerpc: Update to new option-vector-5 format for CAS powerpc: Parse the command line before calling CAS powerpc/xics: Work around limitations of OPAL XICS priority handling powerpc/64: Fix checksum folding in csum_add() powerpc/powernv: Fix opal tracepoints with JUMP_LABEL=n powerpc/booke: Fix boot crash due to null hugepd powerpc: Fix compiling a BE kernel with a powerpc64le toolchain selftest/powerpc: Fix false failures for skipped tests powerpc/powernv: Fix bug due to labeling ambiguity in power_enter_stop powerpc/64: Invalidate process table caching after setting process table powerpc: emulate_step() tests for load/store instructions powerpc: Emulation support for load/store instructions on LE
-
Linus Torvalds authored
Merge branch 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two tiny implementations of the DMA API for callback in ARM (for Xen)" * 'stable/for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: implement xen_swiotlb_get_sgtable callback swiotlb-xen: implement xen_swiotlb_dma_mmap callback
-
Matthew Wilcox authored
Michael's patch to use the default make rule for linking and the patch from Rehas to use -m32 if building a 32-bit test-suite on a 64-bit platform don't work well together. Reported-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Matthew Wilcox authored
There's a relatively rare race where we look at the per-cpu preallocated IDA bitmap, see it's NULL, allocate a new one, and atomically update it. If the kmalloc() happened to sleep and we were rescheduled to a different CPU, or an interrupt came in at the exact right time, another task might have successfully allocated a bitmap and already deposited it. I forgot what the semantics of cmpxchg() were and ended up freeing the wrong bitmap leading to KASAN reporting a use-after-free. Dmitry found the bug with syzkaller & wrote the patch. I wrote the test case that will reproduce the bug without his patch being applied. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Matthew Wilcox authored
Changing the CFLAGS in the Makefile didn't always lead to a recompilation because the OFILES didn't depend on the Makefile. Also, after doing make clean, grep would still complain about a missing map-shift.h; we need -s as well as -q. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Michael Ellerman authored
Currently the radix tree test suite doesn't build with toolchains that use --as-needed by default, for example Ubuntu's: cc -I. -I../../include -g -O2 -Wall -D_LGPL_SOURCE -fsanitize=address -lpthread -lurcu main.o ... -o main /usr/bin/ld: regression1.o: undefined reference to symbol 'pthread_join@@GLIBC_2.17' /lib/powerpc64le-linux-gnu/libpthread.so.0: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status This is caused by the custom makefile rules placing LDFLAGS before the .o files that need the libraries. We could fix it by using --no-as-needed, or rewriting the custom rules. But we can also just drop the custom rules and move the libraries to LDLIBS, and then the default rules work correctly - with the one caveat that we need to add -fsanitize=address to LDFLAGS because that must be passed to the linker as well as the compiler. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Add option 'make BUILD=32' for building 32-bit binaries. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Add performance benchmarks for radix tree insertion, tagging and deletion. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Assert that radix_tree_clear_tags() clears the tags on the passed node and slot. Assert that the case where the radix tree has only one entry at index zero and the node is NULL, is also handled. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Assert that ida_simple_get() allocates an id in the passed range or returns error on failure, and ida_simple_remove() releases an allocated id. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
Rehas Sachdeva authored
Assert that idr_get_next() returns the next populated entry in the tree with an ID greater than or equal to the value pointed to by @nextid argument. Signed-off-by: Rehas Sachdeva <aquannie@gmail.com> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespaceLinus Torvalds authored
Pull namespace fix from Eric Biederman: "This fixes a race between put_ucounts and get_ucounts that can cause a use after free. The fix works by simplifying the code and so there is not even a temptation to be clever and play spinlock vs atomic reference games" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucount: Remove the atomicity from ucount->count
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "There was some breakage with the changes for jump labels in the 4.11 merge window: - powerpc broke as jump labels uses the two LSB bits as flags in initialization. A check was added to make sure that all jump label entries were 4 bytes aligned, but powerpc didn't work that way for modules. Adding an alignment in the module linker script appeared to be the best solution. - Jump labels also added an anonymous union to access those LSB bits as a normal long. But because this structure had static initialization, it broke older compilers that could not statically initialize anonymous unions without brackets. - The command line parameter for setting function graph filter broke the "EMPTY_HASH" descriptor by modifying it instead of creating a new hash to hold the entries. - The command line parameter ftrace_graph_max_depth was added to allow its setting at boot time. It uses existing code and only the command line hook was added. This is not really a fix, but as it uses existing code without affecting anything else, I added it to this release. It was ready before the merge window closed, but I wanted to let it sit in linux-next for a couple of days first" * tag 'trace-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace/graph: Add ftrace_graph_max_depth kernel parameter tracing: Add #undef to fix compile error jump_label: Add comment about initialization order for anonymous unions jump_label: Fix anonymous union initialization module: set __jump_table alignment to 8 ftrace/graph: Do not modify the EMPTY_HASH for the function_graph filter tracing: Fix code comment for ftrace_ops_get_func()
-
Frederic Weisbecker authored
commit 93825f2e converted NSEC_PER_SEC to TICK_NSEC because the author confused NSEC_PER_JIFFY with NSEC_PER_SEC. As a result, the calculation of refined jiffies got broken, triggering lockups. Fixes: 93825f2e ("jiffies: Reuse TICK_NSEC instead of NSEC_PER_JIFFY") Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1488880534-3777-1-git-send-email-fweisbec@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Josh Poimboeuf authored
Arnd Bergmann reported a (false positive) objtool warning: drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer The issue is in find_switch_table(). It tries to find a switch statement's jump table by walking backwards from an indirect jump instruction, looking for a relocation to the .rodata section. In this case it stopped walking prematurely: the first .rodata relocation it encountered was for a variable (resp_state_name) instead of a jump table, so it just assumed there wasn't a jump table. The fix is to ignore any .rodata relocation which refers to an ELF object symbol. This works because the jump tables are anonymous and have no symbols associated with them. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710f ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@trebleSigned-off-by: Ingo Molnar <mingo@kernel.org>
-